Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pinch effect.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Shock waves in a Z-pinch and the formation of high energy density plasma

A Z-pinch liner, imploding onto a target plasma, evolves in a step-wise manner, producing a stable, magneto-inertial, high-energy-density plasma compression. The typical configuration is a cylindrical, high-atomic-number liner imploding onto a low-atomic-number target. The parameters for a terawatt-class machine (e.g., Zebra at the University of Nevada, Reno, Nevada Terawatt Facility) have been simulated. The 2-1/2 D MHD code, MACH2, was used to study this configuration. The requirements are for an initial radius of a few mm for stable implosion; the material densities properly distributed, so that the target is effectively heated initially by shock heating and finally by adiabatic compression; and the liner's thickness adjusted to promote radial current transport and subsequent current amplification in the target. Since the shock velocity is smaller in the liner, than in the target, a stable-shock forms at the interface, allowing the central load to accelerate magnetically and inertially, producing a magneto-inertial implosion and high-energy density plasma. Comparing the implosion dynamics of a low-Z target with those of a high-Z target demonstrates the role of shock waves in terms of compression and heating. In the case of a high-Z target, the shock wave does not play a significant heating role. The shock waves carry current and transport the magnetic field, producing a high density on-axis, at relatively low temperature. Whereas, in the case of a low-Z target, the fast moving shock wave preheats the target during the initial implosion phase, and the later adiabatic compression further heats the target to very high energy density. As a result, the compression ratio required for heating the low-Z plasma to very high energy densities is greatly reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hall instability driven seeding of helical magneto-Rayleigh–Taylor instabilities in axially premagnetized thin-foil liner Z-pinch implosions

Helical magneto-Rayleigh–Taylor instability (MRTI) structures have been observed in z-pinch-driven liner implosion experiments with a pre-imposed axial magnetic field. We show that the formation of these helical structures can be described by a Hall magnetohydrodynamical (HMHD) model. We used the 3D extended magnetohydrodynamics simulation code PERSEUS (which includes Hall physics) [Seyler and Martin, Phys. Plasmas 18, 012703 (2011)] to study these helical instabilities and show that a Hall interchange instability in low-density coronal plasma immediately surrounding the dense liner is responsible for producing helically oriented effects in the magnetic field and current density within the coronal layer. Here, this seeds the helical pitch angle of the MRTI even when other proposed helical seeding mechanisms are either not present in the experiments or not accounted for in the simulations. For example, this mechanism does not require low-density power-feed plasmas to be swept in from large radius or the development of electrothermal instabilities. The Hall Instability is, thus, a new, independent explanation for the origin of the helical instabilities observed in axially premagnetized liner experiments. Simulation results supporting this mechanism are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heat pump via charge incompressibility in a collisional magnetized multi-ion plasma

Stratification due to ion-ion friction in a magnetized multiple-ion species plasma is shown to be accompanied by a heat pump effect, identified for the first time here, transferring heat from one ion species to another as well as from one region of space to another. Here, the heat pump is produced via newly identified heating mechanisms associated with charge incompressibility and the Ettingshausen effect. Besides their academic interest, these new effects may have useful applications to plasma technologies that involve rotation or compression.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stepped pressure equilibrium with relaxed flow and applications in reversed-field pinch plasmas

The multi-region relaxed magnetohydrodynamics (MRxMHD) has been successful in the construction of equilibria in three-dimensional (3D) configurations. In MRxMHD, the plasma is sliced into sub-volumes separated by ideal interfaces, each undergoing relaxation, allowing the formation of islands and chaos. The resulting equilibrium has a stepped pressure profile across sub-volumes. The stepped pressure equilibrium code (SPEC) was developed to calculate MRxMHD equilibria numerically. In this work, we have extended the SPEC code to compute MRxMHD equilibria with field-aligned flow and rotation, following the theoretical development to incorporate cross-helicity and angular momentum constraints. The code has been verified for convergence and compared to a Grad–Shafranov solver in 2D. We apply our new tool to study the flow profile change before and after the sawtooth crash of a reversed-field pinch discharge, in which data of the parallel flow is available. We find the promising result that under the constraints of cross-helicity and angular momentum, the parallel flow profile in post-crash SPEC equilibrium is flat in the plasma core and the amplitude of the flow matches experimental observations. Lastly, we provide an example equilibrium with a 3D helical field structure as the favored lower energy state. This will be the first 3D numerical equilibrium in which the flow effects are self-consistently calculated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

3-Dimensional modeling of large diameter wire array high intensity K-shell radiation sources.

Large diameter nested wire array z-pinches imploded on the Z-generator at Sandia National Laboratories have been used extensively to generate high intensity K-shell radiation. Large initial radii are required to obtain the high implosion velocities needed to efficiently radiate in the K-shell. This necessitates low wire numbers and large inter-wire gaps which introduce large azimuthal non-uniformities. Furthermore, the development of magneto-Rayleigh-Taylor instabilities during the implosion are known to generate large axial non-uniformity These effects motivate the complete, full circumference 3-dimensional modeling of these systems. Such high velocity implosions also generate large voltages, which increase current losses in the power feed and limit the current delivery to these loads. Accurate representation of the generator coupling is therefore required to reliably represent the energy delivered to, and the power radiated from these sources. We present 3D-resistive MHD calculations of the implosion and stagnation of a variety of large diameter stainless steel wire arrays (hv {approx} 6.7 keV), imploded on the Z-generator both before and after its refurbishment. Use of a tabulated K-shell emission model allows us to compare total and K-shell radiated powers to available experimental measurements. Further comparison to electrical voltage and current measurements allows us to accurately assess the power delivered to these loads. These data allow us to begin to constrain and validate our 3D MHD calculations, providing insight into ways in which these sources may be further optimized.

36 MATERIALS SCIENCE↗

Characterization of self-magnetic pinch (SMP) radiographic diode performance on RITS-6 at Sandia National Laboratories. I. Diode dynamics, DC heating to extend radiation pulse

Radiographic diodes focus on an intense electron beam to a small spot size to minimize the source area of energetic photons for radiographic interrogation. The self-magnetic pinch (SMP) diode has been developed as such a source and operated as a load for the six-cavity radiographic integrated test stand (RITS-6) inductive voltage adder driver. While experiments support the generally accepted conclusion that a 1:1 aspect diode (cathode diameter equals anode–cathode gap) delivers optimum SMP performance, such experiments also show that reducing the cathode diameter, while reducing spot size, also results in reduced radiation dose, by as much as 50%, and degraded shot reproducibility. Analysis of the effective electron impingement angle on the anode converter with time made possible by a newly developed dose-rate array diagnostic indicates that fast-developing oscillations of the angle are correlated with early termination of the radiation pulse on many of the smaller-diameter SMP shots. This behavior as a function of relative cathode size persists through experiments with output voltages and currents up to 11.5 MV and 225 kA, respectively, and with spot sizes below approximately few millimeters. Since simulations to date have not predicted such oscillatory behavior, considerable discussion of the angle behavior of SMP shots is made to lend credence to the inference. We report there is clear anecdotal evidence that DC heating of the SMP diode region leads to stabilization of this oscillatory behavior. This is the first of two papers on the performance of the SMP diode on the RITS-6 accelerator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring dynamics of differentially rotating, unmagnetized, free-boundary plasma produced by soft x-ray irradiation

We present results from a new experiment, fielded on the MAGPIE pulsed power generator, producing a rotating, boundary-free plasma with no pre-imposed magnetic field. Angular momentum is introduced to the rotating system by the oblique collision of multiple plasma flows, which are driven by x-ray ablation of solid targets using the soft x-rays emitted from the implosion of wire array z-pinches. This produces a hydrodynamically stable plasma which undergoes ~2-3 rotations over the duration of the experiment, significantly more than previous pulsed-power platforms. Estimating the angular frequency from the electron density profile in the inner part of the rotating plasma shows that it has a quasi-Keplerian rotation profile. The system also allows for the addition of a controllable magnetic field. This, combined with the sufficiently large Reynolds (~10 5 ) and magnetic Reynolds (~10) numbers, will enable investigation of the effect of magnetic field on the structure and stability of the rotating plasma.

Physics - Plasma physics↗

Measurement of astrophysical S factors and electron screening potentials for d(d, n){sup 3}He reaction In ZrD{sub 2}, TiD{sub 2}, D{sub 2}O, and CD{sub 2} targets in the ultralow energy region using plasma accelerators

The paper is devoted to study electron screening effect influence on the rate of d(d, n){sup 3}He reaction in the ultralow deuteron collision energy range in the deuterated polyethylene (CD{sub 2}), frozen heavy water (D{sub 2}O) and deuterated metals (ZrD{sub 2} and TiD{sub 2}). The ZrD{sub 2} and TiD{sub 2} targets were fabricated via magnetron sputtering of titanium and zirconium in gas (deuterium) environment. The experiments have been carried out using high-current plasma pulsed accelerator with forming of inverse Z pinch (HCEIRAS, Russia) and pulsed Hall plasma accelerator (NPI at TPU, Russia). The detection of neutrons with energy of 2.5MeV from dd reaction was done with plastic scintillation spectrometers. As a result of the experiments the energy dependences of astrophysical S factor for the dd reaction in the deuteron collision energy range of 2-7 keV and the values of the electron screening potential U{sub e} of interacting deuterons have been measured for the indicated above target: U{sub e}(CD{sub 2}) Less-Than-Or-Slanted-Equal-To 40 eV; U{sub e}(D{sub 2}O) Less-Than-Or-Slanted-Equal-To 26 eV; U{sub e}(ZrD{sub 2}) = 157 {+-} 43 eV; U{sub e}(TiD{sub 2}) = 125{+-}34 eV. The value of astrophysical S factor, corresponding to the deuteron collision energy equal to zero, in the experiments with D{sub 2}O target is found: S{sub b}(0) = 58.6 {+-} 3.6 keV b. The paper compares our results with other available published experimental and calculated data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of Ho substitution on structure and magnetic properties of BiFeO{sub 3}

Structure and magnetic properties of trivalent Ho substituted BiFeO{sub 3} (Ho{sub x}Bi{sub 1−x}FeO{sub 3}) have been studied for the compositional range x = 0 to 0.2. The structure remains in rhombohedral R3c for x < 0.15, and further increase in x results a structural transition to orthorhombic Pnma. The decrease in Raman modes and the appearance of new mode at 475 cm{sup −1} confirms the structural changes. Ho doping at Bi site breaks the spin cycloid of BiFO{sub 3} and leads to the observation of ferromagnetic order at low temperatures. With increase in temperature, the M-H curves exhibit a pinching leading to double hysteresis loops. A minimum is observed in M-T curves for low fields at compensation temperature (Θ{sub C}) and H{sub C} attains a maximum close to Θ{sub C}. Variation of H{sub C} with temperature is discussed in terms of a model consisting of two sublattices. The improved magnetic properties achieved by Ho doping enhance the potential of BiFeO{sub 3} for multiferroic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Use of conical wire arrays for modeling three-dimensional MHD implosion effects

Results are presented from experimental studies and numerical simulations of three-dimensional dynamics of the plasma produced in the Angara-5-1 facility by the electrical implosion of conical wire arrays at currents of up to 3 MA. The arrays were made of 6-to 8-{mu}m-diameter tungsten wires, the inclination angle of the generatrix with respect to the axis being from 15 deg. to 42 deg. The results of two-dimensional MHD simulations are compared with experimental data. The formation dynamics of the plasma precursor is found to be different for cylindrical and conical arrays. As the cone angle increases, the duration of the X-ray pulse increases, while the height of the pinch radiating zone decreases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluctuating hydrodynamics and the Rayleigh–Plateau instability

The Rayleigh–Plateau instability occurs when surface tension makes a fluid column become unstable to small perturbations. At nanometer scales, thermal fluctuations are comparable to interfacial energy densities. Consequently, at these scales, thermal fluctuations play a significant role in the dynamics of the instability. These microscopic effects have previously been investigated numerically using particle-based simulations, such as molecular dynamics (MD), and stochastic partial differential equation–based hydrodynamic models, such as stochastic lubrication theory. In this paper, we present an incompressible fluctuating hydrodynamics model with a diffuse-interface formulation for binary fluid mixtures designed for the study of stochastic interfacial phenomena. An efficient numerical algorithm is outlined and validated in numerical simulations of stable equilibrium interfaces. We present results from simulations of the Rayleigh–Plateau instability for long cylinders pinching into droplets for Ohnesorge numbers of Oh = 0.5 and 5.0. Both stochastic and perturbed deterministic simulations are analyzed and ensemble results show significant differences in the temporal evolution of the minimum radius near pinching. Short cylinders, with lengths less than their circumference, were also investigated. As previously observed in MD simulations, we find that thermal fluctuations cause these to pinch in cases where a perturbed cylinder would be stable deterministically. Finally, we show that the fluctuating hydrodynamics model can be applied to study a broader range of surface tension–driven phenomena.

97 MATHEMATICS AND COMPUTING↗

Developing the hybrid scenario in DIII-D and KSTAR for W-compatible long-pulse operation

Long-pulse, high-performance operation with tungsten plasma-facing components is a crucial challenge for achieving steady-state (SS) goals in ITER and future fusion devices. This paper presents a joint international effort between the DIII-D and KSTAR tokamaks aimed at demonstrating the compatibility of the high q 95 ~ 6 hybrid scenario with a tungsten divertor and superconducting coils. A DIII-D hybrid scenario recipe is successfully tailored to KSTAR’s operational constraints, which facilitates cross-device studies. The results show successful 30 s long-pulse operation in KSTAR at a normalized beta (β N = 2.4) with a benign m/n = 4/3 mode and effective mitigation of tungsten accumulation. Despite this success, the KSTAR scenario exhibits a greater than 25% reduction in thermal confinement compared to the DIII-D reference. To investigate this discrepancy, we performed a predictive TGYRO validation study, which suggests that the difference is likely caused by a weaker temperature pedestal in the KSTAR discharge due to a higher and narrower density pedestal. In addition, such lower thermal confinement leads to higher impurity accumulation, possibly due to a change in neoclassical transport with increased inward pinch, which further degrades global confinement. We also report that stationary, long-pulse operation with sustained thermal confinement requires consistent fueling and wall conditioning. These findings highlight the importance of optimized fueling and real-time wall conditioning in achieving a high temperature pedestal and strong global confinement during stable long-pulse operation. We propose potential approaches toward fully SS, long-pulse operation, including real-time wall conditioning using an impurity dropper in KSTAR and future tokamaks.

DIII-D↗

Rotational stability of a long field-reversed configuration

Rotationally driven modes of long systems with dominantly axial magnetic field are considered. We apply the incompressible model and order axial wavenumber small. A recently developed gyro-viscous model is incorporated. A one-dimensional equilibrium is assumed, but radial profiles are arbitrary. The dominant toroidal (azimuthal) mode numbers ℓ=1 and ℓ=2 modes are examined for a variety of non-reversed (B) and reversed profiles. Previous results for both systems with rigid rotor equilibria are reproduced. New results are obtained by incorporation of finite axial wavenumber and by relaxing the assumption of rigid electron and ion rotation. It is shown that the frequently troublesome ℓ=2 field reversed configuration (FRC) mode is not strongly affected by ion kinetic effects (in contrast to non-reversed cases) and is likely stabilized experimentally only by finite length effects. It is also shown that the ℓ=1 wobble mode has a complicated behavior and is affected by a variety of configuration and profile effects. The rotationally driven ℓ=1 wobble is completely stabilized by strong rotational shear, which is anticipated to be active in high performance FRC experiments. Thus, observed wobble modes in these systems are likely not driven by rotation alone.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of a reconnection-driven runaway ion tail in a reversed field pinch plasma

While reconnection-driven ion heating is common in laboratory and astrophysical plasmas, the underlying mechanisms for converting magnetic to kinetic energy remain not fully understood. Reversed field pinch discharges are often characterized by rapid ion heating during impulsive reconnection, generating an ion distribution with an enhanced bulk temperature, mainly perpendicular to magnetic field. In the Madison Symmetric Torus, a subset of discharges with the strongest reconnection events develop a very anisotropic, high energy tail parallel to magnetic field in addition to bulk perpendicular heating, which produces a fusion neutron flux orders of magnitude higher than that expected from a Maxwellian distribution. Here, we demonstrate that two factors in addition to a perpendicular bulk heating mechanism must be considered to explain this distribution. First, ion runaway can occur in the strong parallel-to-B electric field induced by a rapid equilibrium change triggered by reconnection-based relaxation; this effect is particularly strong on perpendicularly heated ions which experience a reduced frictional drag relative to bulk ions. Second, the confinement of ions varies dramatically as a function of velocity. Whereas thermal ions are governed by stochastic diffusion along tearing-altered field lines (and radial diffusion increases with parallel speed), sufficiently energetic ions are well confined, only weakly affected by a stochastic magnetic field. High energy ions traveling mainly in the direction of toroidal plasma current are nearly classically confined, while counter-propagating ions experience an intermediate confinement, greater than that of thermal ions but significantly less than classical expectations. The details of ion confinement tend to reinforce the asymmetric drive of the parallel electric field, resulting in a very asymmetric, anisotropic distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Equilibrium and transport for quasi-helical reversed field pinches

This paper presents the most recent results in theoretical/numerical studies on the physics of the quasi-helical regime in reversed field pinch (RFP) configurations. Such regime systematically characterizes RFX-mod experiments at high currents (Ip > 1.2 MA), producing clear internal electron transport barriers. Several approaches, ranging from a macroscopic (MHD) to a microscopic (transport) description, have been used to tackle the related complex physics. From the macroscopic point of view, we derive analytically the electrostatic velocity field consistent with a generic helical ohmic equilibrium. We also provide the first MHD initial-value simulation results in toroidal geometry obtained with the PIXIE3D code. Concerning transport, the effect of magnetic chaos healing by mode separatrix expulsion, believed to favour the formation of transport barriers, is discussed. Results indicate that helical equilibria originated by non-resonant modes are more resilient to chaos formation. Finally, gyrofluid and gyrokinetic tools have been used towards a first assessment of the role of microturbulence in the RFP. Concerning the electrostatic branches, ion temperature gradient mode stability is robustly improved in RFP with respect to tokamaks, due to stronger Landau damping effects, and the marginality condition is estimated to be only spottily reached in present experimental regimes, unless the effects of impurities are considered. Impurities, which in RFX-mod accumulate in the edge, may also significantly impact the stability of the impurity-driven modes. On the electromagnetic side, microtearing turbulence is found to probably play a role at the transport barriers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modelling short channel mosfets for use in VLSI

In an investigation of metal oxide semiconductor field effect transistor (MOFSET) devices, a one-dimensional mathematical model of device dynamics was prepared, from which an accurate and computationally efficient drain current expression could be derived for subsequent parameter extraction. While a critical review revealed weaknesses in existing 1-D models (Pao-Sah, Pierret-Shields, Brews, and Van de Wiele), this new model in contrast was found to allow all the charge distributions to be continuous, to retain the inversion layer structure, and to include the contribution of current from the pinched-off part of the device. The model allows the source and drain to operate in different regimes. Numerical algorithms used for the evaluation of surface potentials in the various models are presented.

Klafter, Alex↗

Understanding turbulence in compressing plasmas and its exploitation or prevention.

Unprecedented densities and temperatures are now achieved in compressions of plasma, by lasers and by pulsed power, in major experimental facilities. These compressions, carried out at the largest scale at the National Ignition Facility and at the Z Pulsed Power Facility, have important applications, including fusion, X-ray production, and materials research. Several experimental and simulation results suggest that the plasma in some of these compressions is turbulent. In fact, measurements suggest that in certain laboratory plasma compressions the turbulent energy is a dominant energy component. Similarly, turbulence is dominant in some compressing astrophysical plasmas, such as in molecular clouds. Turbulence need not be dominant to be important; even small quantities could greatly influence experiments that are sensitive to mixing of non-fuel into fuel, such as compressions seeking fusion ignition. Despite its important role in major settings, bulk plasma turbulence under compression is insufficiently understood to answer or even to pose some of the most fundamental questions about it. This thesis both identifies and answers key questions in compressing turbulent motion, while providing a description of the behavior of three-dimensional, isotropic, compressions of homogeneous turbulence with a plasma viscosity. This description includes a simple, but successful, new model for the turbulent energy of plasma undergoing compression. The unique features of compressing turbulence with a plasma viscosity are shown, including the sensitivity of the turbulence to plasma ionization, and a sudden viscous dissipation'' effect which rapidly converts plasma turbulent energy into thermal energy. This thesis then examines turbulence in both laboratory compression experiments and molecular clouds. It importantly shows: the possibility of exploiting turbulence to make fusion or X-ray production more efficient; conditions under which hot-spot turbulence can be prevented; and a lower bound on the growth of turbulence in molecular clouds. This bound raises questions about the level of dissipation in existing molecular cloud models. Finally, the observations originally motivating the thesis, Z-pinch measurements suggesting dominant turbulent energy, are reexamined by self-consistently accounting for the impact of the turbulence on the spectroscopic analysis. This is found to strengthen the evidence that the multiple observations describe a highly turbulent plasma state.

fast ignition↗