Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pb”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Measurements of ultraheavy cosmic rays with HEAO-3

The HEAO-3 Heavy Nuclei Experiment has measured abundances of elements from Ar-18 to U-92 in the cosmic rays. The results on the ultraheavy elements, those with atomic numbers greater than 30, indicate that the source of the cosmic rays contain a mixture of r-process and s-process material similar to that found in the solar system. This result is at variance with previous indications that the sources are greatly enhanced with freshly synthesized r-process material. Apparent discrepancies between the results and the accepted solar-system abundance have led to a reexamination of data on photospheric abundances of Ge and Pb, resulting in suggested reductions in their values.

Binns, W. R.↗
NASA NTRS1986

Isotopic constraints on planetary evolution

Direct observations are considered that have been made on terrestrial and lunar materials in the search for answers to questions such as: when did the major structural elements (core, mantle, and crust) come into being and evolved. Measurements of isotope ratios of Pb, Sr, Nd, Hf, Ar, and other elements provide information about the internal evolution of the earth and moon since their formation 4.5 Gyr ago. The existing evidence indicates the core formed more than 4.4 Gyr ago, possibly while the earth was still accreting. Though the moon crust is similarly very old, the moon ceased to differentiate after about 1 Gyr whereas earth differentiation has continued to the present. Cataclysmic episodes have occurred, the largest 2.8 Gyr ago, when about half of the present continental mass formed.

Depaolo, D. J.↗
NASA NTRS1987

Cellular-dendritic transition in directionally solidified binary alloys

The microstructural development of binary alloys during directional solidification is studied. Cellular growth data for the Al-Cu and Pb-Sn binary alloy systems are analyzed in order evaluate the criteria of Kurz and Fisher (1981) and Trivedi (1984) for cellular-dendritic transition. It is observed that the experimental growth values do not correlate with the Kurz and Fisher or Trivedi data.

Tewari, S. N.↗
NASA NTRS1987

Double diffusive convection during directional solidification - Nonlinear analysis

The dynamics of doubly diffusive convective flow during the constant-velocity vertical solidification of binary melts to form single-phase solids is examined, summarizing the results of recent experimental and analytical investigations. The effects of horizontal temperature gradients are considered; the nonlinearities of the system and their numerical treatment are discussed; and numerical results are presented graphically for the solidification of a Pb melt containing 0.0015 wt pct Sn, with growth velocity 0.0002 cm/s and a temperature gradient of 200 K/cm in the liquid.

Coriell, S. R.↗
NASA NTRS1986

On the atomic roughness of solid-vapor interfaces - Significance of many-body interactions

Published experimental data on the atomic roughness of solid-vapor interfaces (SVIs) are compiled in a table and compared with the predictions of theoretical models based on the Bragg-Williams approximation (e.g., Jackson, 1958). Significant discrepancies are observed, and a new model employing site-dependent bond strengths based on many-body-interaction effects is developed and demonstrated. Predictions for Cu, Pb, and Zn are presented in extensive tables and graphs and characterized in detail: good agreement with experimental observations of anisotropic melting is obtained.

Chen, Jenn-Shing↗
NASA NTRS1987

Energy-gap spectroscopy of superconductors using a tunneling microscope

A unique scanning tunneling microscope (STM) system has been developed for spectroscopy of the superconducting energy gap. High-resolution control of tunnel current and voltage allows for measurement of superconducting properties at tunnel resistance levels 100-1000 greater than that achieved in prior work. The previously used STM methods for superconductor spectroscopy are compared to those developed for the work reported here. Superconducting energy-gap spectra are reported for three superconductors, Pb, PbBi, and NbN, over a range of tunnel resistance. The measured spectra are compared directly to theory.

Le Duc, H. G.↗
NASA NTRS1986

Studies on precellular evolution - The encapsulation of polyribonucleotides by liposomes

Liposomes have been suggested as possible models of precellular systems formed in the early Archean earth from lipids of nonenzymatic origin. Since it is generally accepted that RNA molecules preceded double-stranded DNA molecules as genetic material, the encapsulation of polyribonucleotides within liposomes (made from dipalmitoyl phosphatidylcholine and from egg yolk phosphatidylcholine) was studied. Quantitative determinations show that approximately 50 percent of the available lipids form liposomes, and that up to 5 percent of the polyribonucleotides can be entrapped by them. Also studied was the encapsulation of polyribonucleotides in the presence of urea and cyanamide and of Zn(2+) and Pb(2+).

Baeza, I.↗
NASA NTRS1988

Auger electron spectroscopy of contrast-forming layers on metals

As shown by Auger electron spectroscopy, the layers formed during contrasting metallographic polished Cu and Ni with an apparatus using intense electron bombardment consist of metal sputtered from the Au, Fe, or Pb cathode. This layer takes up oxygen from the residual atmosphere. The mechanism of contrast enhancement is the same as that of vapor-deposited interference layers.

Hoffmann, Siegfried↗
NASA NTRS1988

Status and directions of modified tribological surfaces by ion processes

An overview is presented of recent advances in modifying contacting surfaces in motion by the various ion assisted surface coating/modification processes to reduce and control tribological failures. The ion assisted coating processes and the surface modification processes offer the greatest potential to custom tailor and optimize the tribological performance. Hard, wear resistant and low shear coatings deposited by the ion assisted processes are discussed. Primarily the recent advances of sputtered MoS2 ion plated Au, Ag, Pb lubricating films and sputtered and ion plated hard, wear resistant TiN, HfN, TiC films are described in terms of structural property performance interrelationships which lead to improved adhesion, cohesion, nucleation, morphological growth, density, film thickness as determined by structural and chemical characterization and frictional and wear behavior. Also, the recent tribological advances using the surface modification processes such as ion implantation, ion beam mixing is discussed with emphasis on the development of lubricous high temperature ceramic surfaces.

Spalvins, Talivaldis↗
NASA NTRS1988

Electrocatalytic reduction of oxygen on modified oxide surfaces

A first step which frequently occurs in the reduction of dioxygen, e.g., at the cathode of the alkaline fuel cell, is the two-electron reduction to the peroxyl ion, HO bar 2. For the efficiency of the fuel cell, this ion must be further reduced, or decomposed, to OH(-). Rate constants for HO bar 2 decomposition have been determined in 31 percent KOH at 25 C for the following catalysts in the form of suspended powders and Teflon-bonded electrodes: Pt, Au, cobalt tetrametoxyl phenyl porphyrin (CoTMPP), and La sub 0.5Pb sub 0.5MnO3. Rates were normalized to unit surface area measured by several methods as suitable. Where possible, four methods were used to measure rate constants: gasometric, oxygen probe, rotating disk electrode, and open-circuit potential decay. Steady-state polarization was also tried but was not as satisfactory. Comparisons are given for the methods in regard to reliability, applicability to the material, and convenience.

Chaffins, Scott A.↗
NASA NTRS1988

Reappraisal of the geology of Kangimut Sammisoq, Ameralik Fjord, Southern West Greenland: Crustal structure and interpretation of isotopic data

In Godthabsfjord, in the North Atlantic Archean Craton, early Archean Amitsoq gneisses are found in association with the mid to late Archean Nuk gneisses. The Amitsoq gneisses contain the Ameralik dykes, now subconcordant strips of amphibolite. The Nuk and Amitsoq gneisses have amphibolite facies polymetamorphic assemblages. To the southeast of Godthabsfjord, there is an extensive region affected by granulite facies metamorphism at 2800 Ma. Early models of crustal evolution for Godthabsfjord and the region to the SE are discussed. Recent detailed mapping combined with U-Pb zircon dating is examined.

Nutman, Allen P.↗
NASA NTRS1988

Geochronological and lead-isotope evidences for rapid crust formation in middle-proterozoic time: The Labrador example

Extensive U-Pb geochronological studies in the Grenville and Makkovik provinces have shown that eastern Labrador is underlain by two distinct crustal blocks. In order to substantiate the juvenile character of the middle-Proterozoic crustal block, the isotopic compositon of lead in leached k-feldspars from the same rocks were analyzed. The results of the analysis are briefly discussed.

Schaerer, Urs↗
NASA NTRS1987

Phase equilibria and liquid phase epitaxy growth of PbSnSeTe lattice matched to PbSe

The necessary phase diagram data for growing lattice-matched layers of PbSnSeTe on PbSe are presented. Solid compounds of Pb(1-x)Sn(x)Se(1-y)Te(y) lattice-matched to PbSe were grown from liquid melts consisting of (Pb/1-x/Sn/x/)(1-z)(Se/1-y/Te/y/)(z); phase equilibria data were determined together with liquidus data for values of x(liquid) from 0 to 40 percent and y(liquid) from 0 to 40 percent for temperatures between 450 and 540 C. It was found that relatively large amounts of Te must be added to the melt to achieve lattice matching because of its low segregation coefficient relative to Se. A significant lattice-pulling effect was discovered for the 5-percent Sn case, and a similar effect is expected for the 10- and 20-percent Sn cases.

Mccann, Patrick J.↗
NASA NTRS1987

Local convective flows in partly solidified alloys

Channel formation in a dendritic mushy zone is examined with reference to experimental results obtained for an acqueous system, NH4Cl-H2O, and a low-melting metallic system, Pb-Sn. The problems of channel nucleation, propagation, and prevention are considered for a configuration in which heat flow is directed downwards and growth occurs upwards into a positive temperature gradient. It is found that channels nucleate at the growth front by double diffusive perturbations into the quiescent bulk liquid, and not by perturbations within the dendritic framework of the mushy zone.

Hellawell, A.↗
NASA NTRS1987

Simulating the cooling of an immiscible alloy

A computer program to simulate the cooling of immiscible alloys is described, and the Pb-Zn system is presented as an example. The program permits the user to calculate various compositions of immiscible alloys. Illustrations are presented which depict the sequence of computer-monitor displays generated by the program.

Probst, H. B.↗
NASA NTRS1988

Ultra heavy nuclei in the cosmic radiation

This paper describes the measurements of the ultraheavy cosmic ray abundances obtained by the Heavy Nuclei Experiment aboard the NASA High Energy Astronomy Observatory-3. It is found that the cosmic ray abundances are in broad agreement with solar system abundances with a step-FIP fractionation model applied although in detail there are some differences. In particular, Ge and Pb appear to be underabundant in the cosmic radiation. Although the platinum/lead ratio and the actinides are consistent with some r-process enhancement, the cosmic ray source is not dominated by the r-process up through the 50s as evidenced by the Sr/Rb ratio and by the abundance of Sn and Ba. The actinides are not greatly enhanced, ruling out freshly synthesized r-process production as the primary source of the heavy cosmic rays.

Binns, W. Robert↗
NASA NTRS1988

Accurate experimental and theoretical comparisons between superconductor-insulator-superconductor mixers showing weak and strong quantum effects

A systematic study of the gain and noise in superconductor-insulator-superconductor mixers employing Ta based, Nb based, and Pb-alloy based tunnel junctions was made. These junctions displayed both weak and strong quantum effects at a signal frequency of 33 GHz. The effects of energy gap sharpness and subgap current were investigated and are quantitatively related to mixer performance. Detailed comparisons are made of the mixing results with the predictions of a three-port model approximation to the Tucker theory. Mixer performance was measured with a novel test apparatus which is accurate enough to allow for the first quantitative tests of theoretical noise predictions. It is found that the three-port model of the Tucker theory underestimates the mixer noise temperature by a factor of about 2 for all of the mixers. In addition, predicted values of available mixer gain are in reasonable agreement with experiment when quantum effects are weak. However, as quantum effects become strong, the predicted available gain diverges to infinity, which is in sharp contrast to the experimental results. Predictions of coupled gain do not always show such divergences.

Mcgrath, W. R.↗
NASA NTRS1988

Isothermal solidification in a binary alloy melt

A space shuttle experiment employing the General Purpose (Rocket) Furnace (GPF) in its isothermal mode of operation is manifested on MSL-3, circa 1989. The central aim of this experiment is to investigate the effect of reduced gravity levels on the segregation behavior in a slowly, and isothermally, cooled sample of a binary Pb-15 wt percent Sn alloy. This experiment would thus be able to simulate, in a small laboratory sample, about 20 mm dia 60 mm high and weighing about 150 grams, some aspects of the segregation phenomena occurring in large industrial ingots. Ground-based experiments conducted in the single-cavity simulator of the GPF, located at Marshall Space Flight Center (MSFC), in support of the microgravity experiment are described in detail. The results of the MSFC experiments are compared with other related experiments conducted at Case Western Reserve University (CWRU), wherein the isothermal constraints were relaxed.

Laxmanan, V.↗