Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Plasma structures for quasiphase matched high harmonic generation

A scheme for creation of periodic plasma structures by ablating a lithographic pattern is demonstrated. A proof of principle experiment was conducted, and plasma parameters were measured as a function of time with spatial resolution <10 and 100 {mu}m periodicity. Several possible applications, in particular, quasiphase matching for high harmonic generation in plasma are considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Remotely induced atmospheric lasing

We propose and analyze a remote atmospheric lasing configuration which utilizes a combination of an ultrashort pulse laser to form a plasma filament (seed electrons) by tunneling ionization and a heater pulse which thermalizes the seed electrons. Electrons collisionally excite nitrogen molecules and induce lasing in the ultraviolet. The lasing gain is sufficiently high to reach saturation within the length of the plasma filament. A remotely generated ultraviolet source may have applications for standoff detection of biological and chemical agents.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Note: Flowing ion population from a resonance cavity source

The experimental low energy plasma for hemispherical analyzers nominal testing thermal plasma facility of Dartmouth College uses a microwave plasma source which generates an ionosphere-like plasma through a two-step process. The plasma is initially generated inside a cylindrical, insulated, resonance cavity. This initial plasma must pass through a sheath in order to enter the main experimental region. This process imparts a significant flow velocity to the ions which has been neglected in previous analysis of this plasma source. We predict the flow energy of the ions to be between 12-15 eV depending on conservation laws and show agreement with experimental results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterizing plasma mirrors near breakdown

Experiments dedicated to the characterization of plasma mirrors with a high energy, single shot short-pulse laser were performed at the 100 TW target area of the Z-Backlighter Facility at Sandia National Laboratories. A suite of beam diagnostics was used to characterize a high energy laser pulse with a large aperture through focus imaging setup. By varying the fluence on the plasma mirror around the plasma ignition threshold, critical performance parameters were determined and a more detailed understanding of the way in which a plasma mirror works could be deduced. It was found, that very subtle variations in the laser near field profile will have strong effects on the reflected pulse if the maximum fluence on the plasma mirror approaches the plasma ignition threshold.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time-resolved spectroscopic diagnostic of laser-induced plasma on germanium targets

Time-resolved optical emission measurements have been made in laser-induced plasma plumes following CO{sub 2} pulsed-laser (10.591 {mu}m, 64 ns and intensity from 0.27 to 4.9 GW cm{sup -2}) irradiation of germanium targets. The temporal behavior of Ge atoms and ionized excited species Ge{sup 3+}, Ge{sup 2+}, and Ge{sup +} is reported. The results show a faster decay of the continuum emission and Ge{sup 3+}, Ge{sup 2+} ionic species than in the case of Ge{sup +} and neutral Ge atoms. The velocity distributions for Ge{sup 3+}, Ge{sup 2+}, Ge{sup +}, and Ge species are obtained from time-of-flight measurements. Electron density in the laser-induced plasma was estimated from the analysis of spectral data at various times from the CO{sub 2} laser pulse incidence. From the intensity decay with the delay time for Ge{sup +}, Ge{sup 2+}, and Ge{sup 3+}, we estimated the three-body electron-ion recombination rate constants for these species.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Internal structure of 0.9 GHz microplasma

Argon microplasmas generated at 0.9 GHz by a split-ring resonator form a single filament-shaped nonequilibrium glow discharge. The internal structure of these microplasmas is probed using laser diode absorption and imaging emission spectrometry. These two-dimensional diagnostics are then Abel inverted to reveal that the core of the filament has a strongly depleted central metastable argon population. The microdischarges are approximately 0.2 mm in width at 1 atm and expand with increasing input power between 0.05-1.5 W. The relative electron density and the Ar(4p) density are estimated from the emission detected by a CCD camera through various bandpass filters. Absolute Ar(4s) densities, on the other hand, are determined by Ar 801.4 nm absorption. The Ar(4s) profile transitions from center-peaked at low power (0.05 W) to center-depleted above 0.25 W, saturating at 10{sup 19} m{sup -3}. The electron density profile within the microplasma, however, remains center-peaked regardless of the power. The spatially-resolved gas temperature was estimated from the broadening of the Ar 801.4 nm absorption profile. The error in this gas temperature measurement due to the depletion of the metastable atoms is corrected using numerical heat transfer models and shown to be 1650 K if the plasma power is 1.2 W. Differences between the peak and average temperatures based on the nitrogen rotational spectrum are also explained using nitrogen emission imaging.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of exclusively He-induced H emission in cooled laser plasma

An experiment was performed for the observation of H emission induced in a cooled laser-induced atmospheric pressure gas plasma of He atoms in their metastable excited state. The strong H emission detected clearly established, to the exclusion of other well known major excitation processes, the exclusive contribution of the He-induced excitation (HIE) mechanism. The process is suggested to take place by means of energy transfer from the excited He atoms to the H atoms via Penning collision induced ionization involving electron exchange. The result further shows that this mechanism may also work for elements other than H and thereby strongly suggests the use of ambient He gas to broaden and complement the applications of standard laser-induced breakdown spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mach 5 bow shock control by a nanosecond pulse surface dielectric barrier discharge

Bow shock perturbations in a Mach 5 air flow, produced by low-temperature, nanosecond pulse, and surface dielectric barrier discharge (DBD), are detected by phase-locked schlieren imaging. A diffuse nanosecond pulse discharge is generated in a DBD plasma actuator on a surface of a cylinder model placed in air flow in a small scale blow-down supersonic wind tunnel. Discharge energy coupled to the actuator is 7.3-7.8 mJ/pulse. Plasma temperature inferred from nitrogen emission spectra is a few tens of degrees higher than flow stagnation temperature, T = 340 {+-} 30 K. Phase-locked Schlieren images are used to detect compression waves generated by individual nanosecond discharge pulses near the actuator surface. The compression wave propagates upstream toward the baseline bow shock standing in front of the cylinder model. Interaction of the compression wave and the bow shock causes its displacement in the upstream direction, increasing shock stand-off distance by up to 25%. The compression wave speed behind the bow shock and the perturbed bow shock velocity are inferred from the Schlieren images. The effect of compression waves generated by nanosecond discharge pulses on shock stand-off distance is demonstrated in a single-pulse regime (at pulse repetition rates of a few hundred Hz) and in a quasi-continuous mode (using a two-pulse sequence at a pulse repetition rate of 100 kHz). The results demonstrate feasibility of hypersonic flow control by low-temperature, repetitive nanosecond pulse discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An atmospheric pressure quasiuniform planar plasma jet generated by using a dielectric barrier configuration

A stable nonthermal quasiuniform planar plasma jet, originating from a planar dielectric duct with a rectangular exit and issuing into ambient air at atmospheric pressure, is reported in the present work. Current-voltage characteristics, one discharge current pulse per sinusoidal half voltage cycle, show that the discharge is not filamentary. Its spatial uniformity in the transverse direction is shown to be excellent by monitoring optical emission spectra in the jet core region except jet boundaries. This is possibly resulted from high preionization in the upstream region, and it is a challenge to the traditional single streamer explanation for nonthermal plasma jets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A high voltage pulsed power supply for capillary discharge waveguide applications

We present an all solid-state, high voltage pulsed power supply for inducing stable plasma formation (density {approx}10{sup 18} cm{sup -3}) in gas-filled capillary discharge waveguides. The pulser (pulse duration of 1 {mu}s) is based on transistor switching and wound transmission line transformer technology. For a capillary of length 40 mm and diameter 265 {mu}m and gas backing pressure of 100 mbar, a fast voltage pulse risetime of 95 ns initiates breakdown at 13 kV along the capillary. A peak current of {approx}280 A indicates near complete ionization, and the r.m.s. temporal jitter in the current pulse is only 4 ns. Temporally stable plasma formation is crucial for deploying capillary waveguides as plasma channels in laser-plasma interaction experiments, such as the laser wakefield accelerator.

43 PARTICLE ACCELERATORS↗

Chirped pulse interferometry for time resolved density and velocity measurements of laser produced plasmas

An optical diagnostic method to record the evolution of plasma density on picosecond time scale with {approx}8 ps resolution in a single shot is presented. A chirped laser pulse of 200 ps is used for obtaining the time resolved interferograms to provide the temporal evolution of plasma density (10{sup 17}/cm{sup 3}) during the probe beam duration. It is shown that the plasma expansion velocity can also be measured from the diffraction pattern superimposed on the interferograms. Plasma velocity of {approx}1.2 x 10{sup 7} cm/s was estimated along with its temporal profile. The details of the method and the results are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Xenon excimer emission from multicapillary discharges in direct current mode

Microdischarges in xenon have been generated in a pressure range of 400-1013 mbar with a fixed flow rate of 100 sccm. These microdischarges are obtained from three metallic capillary tubes in series for excimer emission. Total discharge voltage is thrice as large as that of a single capillary discharge tube at current levels of up to 12 mA. Total spectral irradiance of vacuum ultraviolet (VUV) emission also increases significantly compared to that of the single capillary discharge. Further, the irradiance of the VUV emission is strongly dependent on pressure as well as the discharge current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Rydberg transitions and elemental compositions in the laser produced Al (6063) plasma

We present new studies on the optical emission spectra of the laser produced Al 6063 alloy plasma generated by the 1064 nm Nd: YAG laser. The spectrum reveals Rydberg transitions; nd {sup 2}D{sub 3/2,5/2}{yields} 3p {sup 2}P{sub 1/2,3/2} (n = 3 - 8), ns {sup 2}S{sub 1/2}{yields} 3p {sup 2}P{sub 1/2,3/2} (n 4-6), and the dominant spectral lines of the other constituent elements. We have extracted the relative abundance of the impurities using the relative intensity ratio method. Besides, we have calculated the electron temperature ({approx}7580 K) from the Boltzmann plot method and the electron number densities ({approx}1.4 x 10{sup 17}/cm{sup 3}) from the Stark widths of the aluminum spectral lines. The plasma parameters determined in the present work are in agreement with that reported in the literature. The molecular vibrational transitions of the AlO free radical associated with the B {sup 2}{Sigma}{yields}X {sup 2}{Sigma} band system have also been identified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Beyond Zeeman spectroscopy: Magnetic-field diagnostics with Stark-dominated line shapes

A recently suggested spectroscopic approach for magnetic-field determination in plasma is employed to measure magnetic fields in an expanding laser-produced plasma plume in an externally applied magnetic field. The approach enables the field determination in a diagnostically difficult regime for which the Zeeman-split patterns are not resolvable, as is often encountered under the conditions characteristic of high-energy-density plasmas. Here, such conditions occur in the high-density plasma near the laser target, due to the dominance of Stark broadening. A pulsed-power system is used to generate magnetic fields with a peak magnitude of 25 T at the inner-electrode surface in a coaxial configuration. An aluminum target attached to the inner electrode surface is then irradiated by a laser beam to produce the expanding plasma that interacts with the applied azimuthal magnetic field. A line-shape analysis of the Al III 4s-4p doublet (5696 and 5722 A) enables the simultaneous determination of the magnetic field and the electron density. The measured magnetic fields are generally found to agree with those expected in a vacuum based on the pulsed-power system current. Examples of other transitions that can be used to diagnose a wide range of plasma and magnetic field parameters are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Statistical spatial properties of speckle patterns generated by multiple laser beams

This paper investigates hot spot characteristics generated by the superposition of multiple laser beams. First, properties of speckle statistics are studied in the context of only one laser beam by computing the autocorrelation function. The case of multiple laser beams is then considered. In certain conditions, it is shown that speckles have an ellipsoidal shape. Analytical expressions of hot spot radii generated by multiple laser beams are derived and compared to numerical estimates made from the autocorrelation function. They are also compared to numerical simulations performed within the paraxial approximation. Excellent agreement is found for the speckle width as well as for the speckle length. Application to the speckle patterns generated in the Laser MegaJoule configuration in the zone where all the beams overlap is presented. Influence of polarization on the size of the speckles as well as on their abundance is studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser induced electron acceleration in an ion-channel guiding

Direct electron acceleration by a propagating laser pulse of circular polarization in an ion-channel guiding is studied by developing a relativistic three-dimensional single particle code. The electron chaotic dynamic is also studied using time series, power spectrum, and Liapunov exponent. It is found that the electron motion is regular (non-chaotic) for laser pulse with short time duration, while for long enough time duration, the electron motion may be chaotic. In the case of non-chaotic motion, the electron can gain and retain very high energy in the presence of ion-channel before reaching the steady-state, whereas in the case of chaotic motion, the electron gains energy and then loses it very rapidly in an unpredictable manner.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of laser-induced plasma in supercritical water and vibrational spectroscopic study of accompanying stimulated Raman scattering

We have formed a laser-induced plasma (LIP) in supercritical water (SCW) and studied associated molecular vibrations using spectroscopic methods. The accompanying forward and backward stimulated Raman scattering (SRS) of water molecules showed anisotropic behavior at supercritical conditions (>647 K and >22.1 MPa). The Raman shift of the backward SRS indicated that attractive interactions between water molecules and excess electrons generated by the LIP were dominant in the SCW. The backward SRS spectrum provided a microscopic view of the hydration environment around an excess electron, which is useful for controlling electron-driven chemical reactions and materials processing in SCW.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗