Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Structural phase transitions in AgTa{sub 0.5}Nb{sub 0.5}O{sub 3} thin films.

Octahedral tilt transitions in epitaxial AgTa{sub 0.5}Nb{sub 0.5}O{sub 3} (ATN) films grown on (001){sub p} (where p = pseudocubic) oriented SrRuO{sub 3}/LaAlO{sub 3} and LaAlO{sub 3} substrates were characterized by electron diffraction and high resolution x-ray diffraction. It was found that the ATN films exhibited octahedral rotations characteristic of the Pbcm space group, similar to those seen in bulk materials; however, the temperature of the M{sub 3} {leftrightarrow} M{sub 2} phase transition has been suppressed by -250 K due to the fact that the correlation length for rotations about c{sub p} was significantly reduced. The average off-center B-cation displacements, which signify the degree of long-range order for these local cation positions, were negligibly small compared to bulk materials, as inferred from the near-zero intensity of the 1/4(001){sub p}-type reflections. On cooling, pronounced ordering of B-cation displacements occurred at {approx}60 K which is significantly lower compared to bulk ({approx}310 K). The onset of this ordering coincides with a broad maximum in relative permittivity as a function of temperature. It is believed that point and planar defects in thin ATN films disrupt the complex sequence of in-phase and antiphase rotations around c{sub p} thereby reducing the effective strength of interactions between the tilting and cation displacements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rigorous extraction tunability of Si-integrated Ba{sub 0.3}Sr{sub 0.7}TiO{sub 3} thin film up to 60 GHz

400-nm-thick Ba{sub 0.3}Sr{sub 0.7}TiO{sub 3} thin films are deposited on high resistivity silicon by in situ radio frequency magnetron sputtering. Coplanar waveguides with 1 mum slot width are designed, with accurate knowledge frequency losses behavior, to determine ferroelectric thin-films properties up to 60 GHz. Permittivity, loss tangent, and tunability are extracted through measurements and home made finite element analysis. Tunability of 33% and 29%, with 30 V maximum applied voltage (electric field of 300 kV/cm), are measured at 5 GHz and 60 GHz, respectively, while the dielectric losses evolve from 0.5% to 5%. A brief highlight is proposed about tunable silicon integrated quarter wavelength transformer potentialities for impedance matching.

36 MATERIALS SCIENCE↗

Thermo-mechanical and electrical properties of epoxy composites containing ceramic nanofillers

Epoxy nanocomposites with ceramic nanoparticles, i.e. Al{sub 2}O{sub 3}, Tio{sub 2} and SiO{sub 2}, were prepared by combined dispersion techniques, namely mechanical mixing and sonication. The influence of fillers addition on thermal, mechanical and dielectric properties have been investigated by means of Differential Scanning Calorimetry (DSC), Dynamic-mechanical analysis (DMA) and dielectric spectroscopy to measure the dielectric permittivity, tan delta and volume resistivity. Morphological investigations by Scanning Electron Microscopy (SEM) has been also performed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Evaluation of energy harvesting performance of electrostrictive polymer and carbon-filled terpolymer composites

Recent trends in energy conversion mechanisms have demonstrated the abilities of electrostrictive polymers for converting mechanical vibrations into electricity. In particular, such materials present advantageous features such as high productivity, high flexibility, and processability. Hence, the application of these materials for energy harvesting purposes has been of significant interest over the last few years. The purpose of this paper consists in evaluating the energy scavenging abilities of electrostrictive terpolymer composite filled with 1 vol % carbon black poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene). For fair comparison, a new figure of merit taking into account the intrinsic parameters of the material is introduced. This figure of merit equals the squared product of the electric field-related electrostrictive coefficient by the Young modulus, divided by the permittivity, relating the electric energy density per cycle per squared strain magnitude and squared bias electric field. Based on this criterion, it is demonstrated that the carbon-filled terpolymer outperforms other investigated compositions, exhibiting a figure of merit as high as 30 mJ cm{sup -3} (m/m){sup -2} (V/{mu}m){sup -2} cycle{sup -1}, which is 2000 times higher than pure polyurethane. In addition, the comparison of the figure of merit with experimental maximal harvested powers shows that such a criterion allows a very accurate prediction of the energy scavenging performance of electrostrictive composites.

36 MATERIALS SCIENCE↗

Photon acceleration in the amplified plasma density wake of two copropagating laser pulses

Photon acceleration of a laser pulse occurs in a medium with a space and time-varying permittivity. Using Hamiltonian formulation, a theoretical study of the frequency upshift of a probe laser pulse, which is considered as a 'quasiphoton' or 'test particle,' propagating through an amplified plasma density wake of two copropagating laser pulses, is presented. The linear superposition of wakefields studied using an analytical model shows that the presence of a controlling pulse amplifies the wake of a driver pulse. The amplified wake amplitude can be controlled by varying the delay between the two pulses. Two-dimensional particle-in-cell simulations demonstrate wake superposition due to the two copropagating laser pulses. A phase space analysis shows that the probe photon can experience a significant frequency upshift in the amplified density wake. Furthermore, the range of photon frequencies trapped and accelerated is determined by the amplitude of the density wake.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low temperature plasma enhanced chemical vapor deposition of thin films combining mechanical stiffness, electrical insulation, and homogeneity in microcavities

The deposition of hydrogenated amorphous carbon (a-C:H) as well as hydrogenated amorphous silicon carbonitride (SiCN:H) films was investigated in view of a simultaneous realization of a minimum Young's modulus (>70 GPa), a high electrical insulation ({>=}1 MV/cm), a low permittivity and the uniform coverage of microcavities with submillimeter dimensions. For the a-C:H deposition the precursors methane (CH{sub 4}) and acetylene (C{sub 2}H{sub 2}) were used, while SiCN:H films were deposited from mixtures of trimethylsilane [SiH(CH{sub 3}){sub 3}] with nitrogen and argon. To realize the deposition of micrometer thick films with the aforementioned complex requirements at substrate temperatures {<=}200 deg. C, several plasma enhanced chemical vapor deposition methods were investigated: the capacitively coupled rf discharge and the microwave electron cyclotron resonance (ECR) plasma, combined with two types of pulsed substrate bias. SiCN:H films deposited at about 1 Pa from ECR plasmas with pulsed high-voltage bias best met the requirements. Pulsed biasing with pulse periods of about 1 {mu}s and amplitudes of about -2 kV was found to be most advantageous for the conformal low temperature coating of the microtrenches, thereby ensuring the required mechanical and insulating film properties.

36 MATERIALS SCIENCE↗

Polar fluctuations in Mn substituted KTaO{sub 3} ceramics

Polar fluctuations were found in KTaO{sub 3} when K{sup +} was substituted with Mn{sup 2+} on the A-site. The temperature dependence of the real part of the dielectric permittivity of (K{sub 1-2x}Mn{sub x{open_square}x})TaO{sub 3} ceramics (x=0-0.05) shows a diffuse maximum between 50-100 K in the frequency range 10{sup 2}-10{sup 6} Hz, shifting to higher temperature with increasing frequency and Mn content. The results are analyzed using a modified Curie-Weiss law, the Cole-Cole equation and the Arrhenius law. Here it is suggested that the observed relaxor-type dielectric behavior is attributed to the formation of electric dipoles originating from two distinct sources; one from an atomic off-center position when Mn{sup 2+} substitutes for K{sup +} and one from the anion deficiencies formed by these aliovalent substitutions.

36 MATERIALS SCIENCE↗

Nanowire charging in collisionless plasma

We calculate the collision cross section of a charged finite cylinder (nanowire) with a beam of ions and electrons in collisionless plasma. We find that, while the shape and area of the cross section has complex dependence on the charge and orientation of the nanowire relative to the charged beam, its orientational average has a remarkably simple form: for attractive interactions, it is a linear function of the electrostatic ratio q{sub j}q{sub p}e{sup 2}/4{pi}{epsilon}{sub 0}L{sub 0}kT, where q{sub j}e is the charge of the ions/electrons, q{sub p}e is the charge on the cylinder, L{sub 0} is the half-length of the nanowire, T is the temperature of the charged species, and {epsilon}{sub 0} is the permittivity of free space. This linearity persists into the repulsive regime up until the cross sectional area is reduced to about 5% of its value for neutral collisions. We calculate the corresponding charging currents and show that the charging behavior of the nanowire in Maxwellian plasma is described by an equivalent sphere whose radius depends only on the aspect ratio of the nanowire. For small aspect ratios, the equivalent sphere has the same surface area as the nanowire.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficiency enhancement of a dielectric barrier plasma discharge by dielectric barrier optimization

The characteristic feature of a dielectric barrier discharge (DBD) is the dielectric barrier placed between the electrodes. In the present work, the influence of the dielectric barrier to the properties of a DBD in air was investigated. Spectroscopic characterization of the DBD and electrical measurements were carried out. It was shown that the efficiency of a DBD can be considerably improved by optimizing the dielectric barrier. The dielectric material should possess an appropriate relative permittivity and thickness. For thin dielectric barriers, a high secondary emission coefficient becomes important. Additionally, the use of only one dielectric barrier is advantageous.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Waves and negative refraction in magnetized plasma with ferrite grains

The propagation of high frequency electromagnetic waves in the low temperature magnetized plasma with ferrite grains (MPFG) is considered. The dispersion properties of MPFG are simultaneously characterized by the permittivity and permeability tensors. The dispersion of the permeability is caused by the high frequency magnetization of the grain subsystem and is important in the vicinity of the frequency of ferromagnetic resonance, which coincides with the electron cyclotron frequency {omega}{sub c}. The MPFG becomes transparent for the waves that cannot propagate in conventional electron-ion magnetized plasma. It is shown that the refractive index of the extraordinary wave propagating along and transversal to the external magnetic field with frequencies close to {omega}{sub c} can be negative as well as positive. For the typical parameters of MPFG, the group velocity of this wave is much smaller than the speed of light. The refractive index of MPFG matched with the free space is obtained for waves propagating at an arbitrary angle with respect to the applied constant magnetic field. The results obtained clearly shows that the dispersion properties of MPFG have all the known properties of left-handed media in the vicinity of {omega}{sub c}.

36 MATERIALS SCIENCE↗

Intrinsic and extrinsic relaxation of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics: Effect of sintering

The effect of sintering process on the electrical properties of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) ceramic dielectrics were investigated in this paper. It was found that grain size is affected by sintering and the nonlinear current-voltage (I-V) property will decrease with the increased sintering time. Also, the frequency and temperature dependences of dielectric permittivity and loss in the ranges of 10{sup -1}-10{sup 7} Hz and 130-270 K were studied. Two relaxation processes with activation energy of 0.51 eV and 0.10 eV, respectively, were found in the frequency dependence of tan {delta} and Cole-Cole planes, which can be interpreted in terms of insulating grain boundaries and semiconducting grains. It was suggested that grain boundary Maxwell-Wagner relaxation and ionization of oxygen vacancy V{sub O}{sup ++}, proposed as extrinsic and intrinsic relaxations, are responsible for the dielectric behaviors of CCTO ceramics.

36 MATERIALS SCIENCE↗

Microstructural and dielectric properties of Ba{sub 0.6}Sr{sub 0.4}Ti{sub 1-x}Zr{sub x}O{sub 3} based combinatorial thin film capacitors library

Epitaxial growth of Ba{sub 0.6}Sr{sub 0.4}Ti{sub 1-x}Zr{sub x}O{sub 3} (0{<=}x{<=}0.3) composition spread thin film library on SrRuO{sub 3}/SrTiO{sub 3} layer by combinatorial pulsed laser deposition (PLD) is reported. X-ray diffraction and energy dispersive x-ray spectroscopy studies showed an accurate control of the film phase and composition by combinatorial PLD. A complex evolution of the microstructure and morphology with composition of the library is described, resulting from the interplay between epitaxial stress, increased chemical pressure, and reduced elastic energy upon Zr doping. Statistical and temperature-related capacitive measurements across the library showed unexpected variations in the dielectric properties. Doping windows with enhanced permittivity and tunability are identified, and correlated to microstructural properties.

36 MATERIALS SCIENCE↗

Ponderomotive acceleration of electrons by a self focused laser pulse

Ponderomotive acceleration of electrons by a short laser pulse undergoing relativistic self-focusing in a plasma is investigated. The saturation in nonlinear plasma permittivity causes periodic self-focusing of the laser. The periodicity lengths are different for different axial segments of the pulse. As a result, pulse shape is distorted. An electron initially on the laser axis and at the front of the self-focusing pulse gains energy from the pulse until it is run over by the pulse peak. By the time electron reaches the tail, if pulse begins diverging, the deceleration of the electron is slower and the electron is left with net energy gain. The electrons slightly off the laser axis see a radial ponderomotive force too. Initially, when they are accelerated by the pulse front the acceleration is strong as they are closer to the axis. When they see the tail of the pulse (after being run by the pulse), they are farther from the axis and the retardation ponderomotive force is weaker. Thus, there is net energy gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolving morphotropic phase boundary in lead-free (Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-BaTiO{sub 3} piezoceramics

The correlation between structure and electrical properties of lead-free (1-x)(Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-xBaTiO{sub 3} (BNT-100xBT) polycrystalline piezoceramics was investigated systematically by in situ synchrotron diffraction technique, combined with electrical property characterization. It was found that the morphotropic phase boundary (MPB) between a rhombohedral and a tetragonal phase evolved into a morphotropic phase region with electric field. In the unpoled material, the MPB was positioned at the transition from space group R3m to P4mm (BNT-11BT) with optimized permittivity throughout a broad single-phase R3m composition regime. Upon poling, a range of compositions from BNT-6BT to BNT-11BT became two-phase mixture, and maximum piezoelectric coefficient was observed in BNT-7BT. It was shown that optimized electrical properties are related primarily to the capacity for domain texturing and not to phase coexistence.

36 MATERIALS SCIENCE↗

Filamentation of laser in an inhomogeneous plasma

Filamentation of an intense short pulse laser in an inhomogeneous plasma is investigated when laser propagates along the direction of density gradient and nonlinearity arises due to the relativistic mass variation and ponderomotive force. The ion motion is neglected; however, the effect of dielectric swelling is included. The inhomogeneity in the density profile introduces dielectric swelling of the pump intensity enhancing the plasma permittivity and the growth rate of the instability. The perturbation in laser amplitude grows faster than exponential as the laser penetrates deeper into the denser plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of temperature and time on properties of spark plasma sintered NiCuZn: Co ferrite

Spark plasma sintering is a powerful method to produce fine grain dense ferrite at low temperature. However the process, usually conducted in neutral atmosphere in a carbon die, yields carbon surface deposition and the reduction of Fe{sup 3+} into Fe{sup 2+}. It is shown that subsequent annealing in air can remove carbon and under some conditions produce complete oxidation of Fe{sup 2+} ions. Regular values of the resistivity and permittivity (resp., 1 M{Omega}m, 13 {epsilon}{sub 0}) are recovered for most samples annealed at temperatures not higher than 750 deg. C. A relatively high value of the permeability (up to 240) and a high merit factor ({mu}{sub s}xf{sub r}>5 GHz) have been achieved.

36 MATERIALS SCIENCE↗

Electromagnetic properties of microwave sintered ferromagnetic-ferroelectric composites for application in low temperature co-fired ceramic devices

In this paper, microwave sintering (MS) technology has been applied in the preparation of ferromagnetic-ferroelectric composites. Several kinds of (Ni{sub 0.3}Zn{sub 0.6}Cu{sub 0.1})Fe{sub 2}O{sub 4} (NiCuZn) ferrite with different contents of BaTiO{sub 3}(BT) have been fabricated by MS technology. We found that the sintering time and temperature were significantly reduced from 22 h and 1100 deg. C for the conventional sintering (CS) process to 2 h and 840 deg. C for MS process, respectively. Experiments show that MS treated NiCuZn-BT composites possess both excellent ferromagnetic and ferroelectric properties. For the composites of NiCuZn added with 15% BaTiO{sub 3}, the real part of permittivity is larger than 50 below 20 MHz and the real part of dielectric constant is larger than 18 below 1 GHz. Our results indicate that the microwave sintering method is a potential important technique in LTCC technology.

36 MATERIALS SCIENCE↗

Skin depth criterion for foil thickness in laser pressure acceleration of monoenergetic ions

An analytical formalism is developed to study the nonlinear laser penetration through radiation pressure accelerated thin foils, employed to produce high energy ions. We include the effects of relativistic mass increase and nonuniform electron density compression due to the ponderomotive force in plasma permittivity. For foils like diamond the usual optimum foil thickness l{sub opt}={lambda}{sub L}n{sub cr}a{sub 0}/{pi}n{sub 0} (where {lambda}{sub L} and a{sub 0} are the wavelength and normalized amplitude of the laser), at which the ponderomotive force on electrons balances the space charge force due to the ions left behind, is significantly below the skin depth unless the laser intensity is excessively large and significant laser transmission through the foil reduces the radiation pressure on it. The reflection coefficient decreases with laser field strength, though the ponderomotive force led electron compression tends to raise it. The reflection coefficient also decreases significantly with foil velocity, which is a sensitive function of laser field strength and foil thickness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗