High-Temperature Growth of CeO x on Au(111) and Behavior under Reducing and Oxidizing Conditions
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Explore the source record for details and available documents.
Explore the source record for details and available documents.
We investigated the electrical properties of zinc tin oxide (ZTO) films deposited via atomic layer deposition and compared them to ZnO and SnO{sub 2} films as a function of the annealing temperature. The ZTO and ZnO, except for SnO{sub 2}, films exhibited an electrical transition from a metal to semiconductor characteristics when annealed above 300 °C. The X-ray photoelectron spectroscopy analyses indicate that the relative area of the oxygen vacancy-related peak decreased from 58% to 41% when annealing at temperatures above 400 °C. Thin film transistors incorporating ZTO active layers demonstrated a mobility of 13.2 cm{sup 2}/V s and a negative bias instability of −0.2 V.
Abstract Direct extraction of used nuclear fuel (UNF) in an organic solution could be more efficient than the previous practice with aqueous solutions. However, the UNF would need to be treated via voloxidiation before being processed using solvent extraction. The voloxidation process can form oxide and/or nitrate compounds. This work investigated the dissolution of uranium/lanthanide oxides in 30 vol % TBP diluted in dodecane (pre-equilibrated with 4 M nitric acid) in a glass reactor with air sparging to ascertain the uranium/lanthanide oxide dissolution behavior prior to scaling the process. The uranium/lanthanide oxides were prepared by co-precipitating uranium/lanthanide nitrates with hydroxide and then calcined to form a mixed oxide. While the relative concentrations of the lanthanides are not representative of used nuclear fuel, the neodymium and erbium allowed ease of tracking dissolution with visible spectroscopy. Cerium was used as a surrogate for plutonium. The dissolution rate of the oxides was similar but incomplete. A miniscule amount of cerium, as cerium oxide, took several months to slowly dissolve; however, when co-precipitated with uranium and other lanthanides, a significant amount of cerium dissolved readily.
Explore the source record for details and available documents.
As the materials for fuel claddings for water-cooled reactors, binary and multicomponent zirconium alloys zirconium-niobium (Zr-Nb) (E110, M5), zirconium-tin-iron (Zr-Sn-Fe) (Zircaloy-2,-4), and zirconium-niobium-tin-iron (Zr-Nb-Sn-Fe) (E635, ZIRLO{sup R} ) most commonly are used. Improvement extends, in particular, by varying their composition by niobium, tin, and iron. At the same time, importance is given to ensuring the safe operation of the fuel rods not only in normal conditions but also in emergency situations such as a loss of coolant accident. In this paper, we present the research results of studies of the influence of alloying elements niobium, tin, and iron on corrosion resistance and embrittlement at high-temperature steam oxidation of fuel claddings based on the alloy types Zr-xNb (x=1.0/2.5) and Zr-xNb-ySn-zFe (x=0.6/2.4; y=0.24/1.1; z=0.18/0.34) made by using zirconium sponge. We conducted high-temperature steam oxidation tests at temperatures of 1,000 deg. C, 1,100 deg. C, and 1,200 deg. C with continuous measurement of the weight gain during the experiment and subsequent cooling in steam with rate ∼ 20 deg. C/s. We conducted studies of kinetics of high-temperature oxidation in steam, structural-phase state changes, alloying elements distribution, absorbed hydrogen content, and residual ductility after rapid cooling of the oxidized specimens. We revealed the difference in the oxidation kinetics of the materials studied, which decreased as the oxidation temperature increased. Likewise, an increase of the tin content in the alloy influenced a specimen's breakaway oxidation intensification at 1,000 deg. C. This shows that the mechanical properties of fuel claddings oxidized under the same conditions depend on their alloying composition, and the hydrogen fraction is absorbed by the specimen and formed by the oxidation of ZrO{sub 2}, α-Zr(O), and ex-β layer structures, which in turn varies depending on the alloy composition. The increase of niobium, tin, and iron content in the zirconium alloy leads to a decrease in the residual ductility of fuel claddings after high-temperature steam oxidation. According to obtained results, among the materials studied, Zr-1.0Nb alloy is the most resistant to embrittlement during high-temperature steam oxidation at temperatures of 1,000-1,200 deg. C. (authors)
As UO 2 is easily oxidized during the nuclear fuel cycle it is important to have a detailed understanding of the structures and properties of the oxidation products. Experimental work over the years has revealed many stable uranium oxides including UO 2 , U 4 O 9 (UO 2.25 ), U 3 O 7 (UO 2.33 ), U 2 O 5 (UO 2.5 ), U 3 O 8 (UO 2.67 ), and UO 3 , all with a number of different polymorphs. These oxides are broadly split into two categories, fluorite-based structures with stoichiometries in the range of UO 2 to UO 2.5 and less dense layered-type structures with stoichiometries in the range of UO 2.5 to UO 3 . While UO 2 is well characterized, both experimentally and computationally, there is a paucity of data concerning higher stoichiometry oxides in the literature. In this work we determine the ambient melting points of all the six stoichiometric uranium oxides listed above and compare them to the available experimental and/or theoretical data. We demonstrate that a family of the six ambient melting points map out a solid-liquid transition boundary consistent with the high-temperature portion of the phase diagram of uranium-oxygen system suggested by Babelot et al.
The effect of thermal shock on the spalling of oxides from the surfaces of several commercial alloys was determined. The average cooling rate was varied from approximately 240 C per second to less than 1.0 C per second during cyclic oxidation tests in air. The tests consisted of one hundred cycles of one hour at the maximum temperature (1100 or 1200 C). The alloys were HOS-875, TD-Ni, TD-NiCrAl, IN-601, IN-702, and B-1900 plus Hf. All of these alloys exhibited partial spalling within the oxide rather than total oxide loss down to bare metal. Thermal shock resulted in deformation of the metal which in turn resulted, in most cases, in changing the oxide failure mode from compressive to tensile. Tensile failures were characterized by cracking of the oxide and little loss, while compressive failures were characterized by explosive loss of platelets of oxide. This behavior was confirmed by examination of mechanically stressed oxide scales. The thermally shocked oxides spalled less than the slow cooled samples with the exception of TD-NiCrAl. This material failed in a brittle manner rather than by plastic deformation.
One SiC material and three Si3N4 materials including hot-pressed Si3N4 as a baseline were exposed in a Mach-1-gas-velocity burner rig simulating a turbine engine environment. Criteria for the materials selection were: potential for gas-turbine usage, near-net-shape fabricability and commercial/domestic availability. Cyclic exposures of test vanes up to 250 cycles (50 hr at temperature) were at leading-edge temperatures to 1370 C. Materials and batches were compared as to weight change, surface change, fluorescent penetrant inspection, and thermal fatigue behavior. Hot-pressed Si3N4 survived the test to 1370 C with slight weight losses. Two types of reaction-sintered Si3N4 displayed high weight gains and considerable weight-change variability, with one material exhibiting superior thermal fatigue behavior. A siliconized SiC showed slight weight gains, but considerable batch variability in thermal fatigue.
Abstract not provided.
As the material of fuel claddings for water cooled reactors most commonly used binary and multicomponent zirconium alloys Zr-Nb (E110,M5), Zr-Sn-Fe (Zircaloy-2,-4) and Zr-Nb-Sn-Fe (E635, Zirlo) are used, which improvement extends, in particular, by varying their composition by Nb, Sn and Fe. At the same time, the importance is given to ensuring the safe operation of the fuel rods not only in normal conditions but also in emergency situations such as LOCA. In this paper the researches results of the studies of influence of alloying elements Nb, Sn (and Fe) on corrosion resistance and embrittlement at high temperature steam oxidation of fuel claddings based on alloys types Zr-xNb (x=1.0/2.5) and Zr-xNb-ySn-zFe (x=0.6/2.4; y=0.24/1.1; z=0.18/0.34) made with using zirconium sponge are presented. High temperature steam oxidation tests were carried out at temperatures of 1000, 1100 and 1200 deg. C with continuous measurement of the weight gain during the experiment and subsequent cooling in steam with rate ∼ 20 deg. C/s. The studies of kinetics of high-temperature oxidation in steam, structural-phase state changes, alloying elements distribution, absorbed hydrogen content and residual ductility after rapid cooling of the oxidized specimens were made. The difference in the oxidation kinetics of the materials studied was revealed, it decreases with the oxidation temperature increase. At the same time, an increase of the Sn content in the alloy influences on specimens 'breakaway' oxidation intensification at 1000 deg. C. It is shown that the mechanical properties of fuel claddings oxidized under the same conditions depend on their alloying composition, the hydrogen fraction absorbed by the specimen and formed by the oxidation ZrO2, a-Zr(O) and 'ex-β' layers structure, which in turn varies depending on the alloy composition. The increase of Nb, Sn and Fe content in the zirconium alloy leads to decrease in residual ductility of fuel claddings after high temperature steam oxidation. According to obtained results the most resistant to high-temperature steam oxidation and embrittlement at temperatures of 1000-1200 deg. C among the materials studied is Zr-1Nb alloy. (authors)
For presentation at AMPP 2024, New Orleans, LA, March 3-7, 2024.
Using a direct observation experimental method, the oxide formation behavior on the surface of Fe-Cr-5 mass pct C-Si alloy baths during decarburization by a top-blown Ar-O 2 mixture was studied. The effects of the initial Si and Cr content of the alloy, temperature, and oxygen feed ratio on oxide formation were investigated. The results showed that, for alloys without Si, oxide particles, unstable oxide films, and stable oxide films formed sequentially. The presence of Si in the alloy changed the formation behavior of stable oxide film, and increased the crucial C content when stable oxide film started to form. Increasing the temperature, decreasing the initial Cr content, and increasing the ratio of the diluting gas decreased the critical C content at which a stable oxide film started to form. In addition, the P CO and a Cr 2O 3 values at which oxides started to form were estimated using Hilty’s equation and the equilibrium relation to understand the formation conditions and the role of each parameter in oxide formation.
The effect of oxidation on the high heat flux behavior of a thermal barrier coating was evaluated by cyclically exposing preoxidized specimens to a 3000 C nitrogen plasma. The thermal barrier coatings consisted of a 0.025 cm layer of air-plasma-sprayed ZrO2-7 percent Y2O3 and a 0.012 cm layer of low pressure-plasma-sprayed NiCoCrAlY applied over 0.13 cm diameter B1900+Hf cylindrical substrates. A gradient of 800 C is produced across the ceramic layer in each 0.5 second exposure. This is much more severe than the gradient encountered on a gas turbine engine. Prior to exposure, the specimens were preoxidized at 1200 C for time from 0 to 20 hours. These coatings were found to be tolerant to the high heat flux plasma flame for all but the most severe preoxidations. However, life degraded rapidly for preoxidation times in excess of 15 hours at 1200 C. A log-log plot of cycles-to-failure vs estimated oxidative weight gain yield a straight or nearly straight line, and this line could be rationalized using an oxidation-based model that was developed previously for low heat flux applications.
The corrosion behavior of oxide films grown on Type 316L stainless steel (SS) in molten FLiNaK (LiF-NaF-KF: 46.5−11.5−42 mol.%) salt was investigated. The results show that the oxide film formed on Type 316L SS is unstable and can only temporarily protect materials from corrosion in molten FLiNaK salt. Based on the electrochemical impedance spectroscopy, the oxide dissolution rate is calculated to be 0.85 nm/h at 700 °C in molten FLiNaK salt. Finally, after the oxide film dissolved, Cr and Fe are selective dealloyed from the steel, leading to intergranular corrosion of Type 316L SS in molten fluoride salt.
Highlights: • A series of rare earth urinates, RE{sub 6}UO{sub 12}, were synthesized using the solid state method. • The crystal structures of RE{sub 6}UO{sub 12} were refined using the Rietveld method. • Magnetic properties were measured and AF ordering was observed in RE = Gd, Tb, Dy. - Abstract: A series of rare earth uranates, RE{sub 6}UO{sub 12-δ} (RE = La, Nd, Sm – Dy, Er and Yb), were synthesized via the solid state method and their structures were determined using the Rietveld method. These compounds crystallize in the rhombohedral space group R-3H with the lattice parameters a = 10.47005(3) Å and c = 9.98034(3) Å for the La analogue. The temperature and field dependent magnetization are reported for each analogue. Antiferromagnetic ordering is observed for RE = Gd, Tb, and Dy with Néel temperatures of 2.1 K, 5.8 K, and 2.8 K, respectively. Magnetic measurements on the La{sub 6}UO{sub 12} analogue indicate the presence of some U{sup 5+}, and therefore, oxygen vacancies in the structure. The variability of the U valence is examined.