Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Revisiting the initial irreversible capacity loss of LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode material batteries

Layered LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) attracts widespread attention primarily due to its potential for high energy density and moderate thermal stability. However, the low initial coulombic efficiency (ICE) of the material limits the maximum utilization of their capacity. The capacity loss in the first cycle occurs under 4.0V and keep almost constant are considered as common characteristics for NCM-based materials. A clear cognition on the initial capacity loss may light the way to improve the practical reversible capacity of NCM622 at 4.0V. Conducting operando X-ray diffraction during galvanostatic charge/discharge cycling at different temperature (25 degrees C, 45 degrees C and 60 degrees C) and different current (0.1C, 0.01C, 1C=120 mA g -1 ) in the voltage range of 2.7-4.0V, we find that only 8% of the measured initial irreversible capacity loss is associated with parasitic reactions that form cathode/electrolyte interface, and that the dominant contributors include the slow Li + diffusion kinetics (similar to 46% contribution) and irreversible O3/H1-3 phase transition (similar to 46% contribution). Finally, this semi-quantitative study provides new insight on initial capacity loss, guiding further targeted modification and fully utilization of NCM622.

25 ENERGY STORAGE↗
DOE OSTI2022

Tuning discharge voltage by Schottky electron barrier in P2-Na 2/3 Mg 0.205 Ni 0.1 Fe 0.05 Mn 0.645 O 2

Recently, Mg doped Na metal oxide layered cathode compounds have attracted strong interest for Na-ion battery applications. We report a new type of asymmetric phase evolution between charge and discharge is found to show much-enhanced discharge voltage in P2-Na 2/3 Mg 0.205 Ni 0.1 Fe 0.05 Mn 0.645 O 2 over the parent cathode compound. P2 solid solution is found to show an abnormal coexistence with O2-P2 two-phase reaction during discharge with simultaneous reduction of O, Ni, and Fe redoxes, distinct from the conventional P2-O2 two-phase reaction in the charge. Our analysis suggests that the P2 and O2 two-phase boundary forms a novel unidirectional Schottky barrier to impede electron and Na diffusions in discharge only, thus making the kinetically preferred P2 solid solution phase abnormally coexist with the two-phase region for high discharge voltage and low polarization. Our work demonstrates tuning dynamic evolution of electronic Schottky barrier as a new dimension for advanced kinetic design of high-performance battery cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Characterization and recovery of rare earth elements and other critical metals (Co, Cr, Li, Mn, Sr, and V) from the calcination products of a coal refuse sample

Here, the impacts of calcination on the leaching recovery of rare earth elements (REEs) and other critical metals from a Baker seam coal refuse material were investigated. Acid leaching test results showed that leaching recovery of the REEs, especially the light REEs, was increased significantly from around 24% to 80–90% after calcination under 600–750 °C for two hours. By considering the major element leaching kinetics and the mineralogical changes of the dominant minerals caused by calcination, two mechanisms were proposed for the improved leaching performance: (1) decomposition of difficult-to-dissolve REE-bearing minerals into soluble forms; and (2) liberation of REE-bearing minerals encapsulated in clays after calcination due to the dehydration and disintegration of the layered clay structure. Sequential chemical extraction tests showed that a significant fraction (around 75%) of the REEs in the raw material were present in an insoluble form. After calcination under proper temperatures (600–800 °C), the majority of the insoluble light REEs (LREEs) were converted into soluble forms. Changes in the modes of occurrence of the LREEs and phosphorous based on leaching rate and sequential leaching correlated well as a function of the calcination temperature. This finding in addition to SEM-EDX results tends to indicate the potential that the LREEs occur primarily as rare earth phosphates such as monazite in the untreated coal refuse material. The acid leaching and sequential chemical extraction results show that co-extraction of REEs and other critical metals such as Co, Mn, and Li is possible using a calcination-acid leaching procedure.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Influence of copper content on the high temperature tensile and low cycle fatigue behavior of cast Al-Cu-Mn-Zr alloys

The relationship between low cycle fatigue (LCF) and monotonic tensile fracture strain was investigated for cast Al-Cu-Mn-Zr alloys containing 6 and 9 wt% Cu at 250 °C. The 9% Cu alloy consisted of larger size and volume fraction of brittle intermetallic grain boundary particles that fractured during tensile tests to reduce the fracture strain by 50% compared to the 6% Cu alloy. We found that LCF life was similar between the two alloys and weakly influenced by the particles. LCF life and fracture strain were poorly correlated due to the dominant influence of particles on monotonic tensile crack but not on fatigue crack.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Performance of stainless steel interconnects with (Mn,Co) 3 O 4 -Based coating for solid oxide electrolysis

Mixed transition-metal oxide coatings are commonly applied to stainless steel interconnects for solid oxide cell stacks. Such coatings reduce oxidation and Cr evaporation rates, leading to improved degradation rate and stack lifetime. Here, the ChromLok™ MCO-based composition (Mn,Co) 3 O 4 is applied to Crofer 22 APU stainless steel and evaluated specifically for application in solid oxide electrolyzer stacks operating around 800 °C and utilizing oxygen-ion-conducting solid oxide cells. The MCO coating is found to decrease the stainless steel oxidation rate by about one order of magnitude, and decrease the Cr evaporation rate by fourfold. Furthermore, the coating also dramatically lowers the rate of area-specific resistance increase for stainless steel coupons oxidized for 500 h with constant current applied, from 33 mΩ*cm 2 kh -1 for an uncoated coupon to less than 4 mΩ*cm2 kh -1 for coated coupons. The coating is demonstrated on full-scale interconnects for single-cells, where the coating dramatically reduces degradation rate, and for a stack, which displays stable operation for 700 h.

08 HYDROGEN↗
DOE OSTI2023

Dynamic oxidation of (Mn,Co) 3 O 4 -Coated interconnects for solid oxide electrolysis cells

Solid oxide electrolysis cell stacks are expected to experience dynamic conditions when using renewable electricity derived from wind or solar power. To address this scenario, (Mn,Co) 3 O 4 (MCO)-coated Crofer 22 APU interconnect coupons are subjected to thermal cycling, and intermittent current density, with gas compositions relevant to high-temperature electrolysis (elevated steam:hydrogen ratio and oxygen content). Defects are also intentionally introduced in the MCO coating, to assess whether the difference in oxidation properties of the adjacent coated and uncoated (defective) surfaces causes sufficient stress to damage the protective oxide scale. Specimens with defects are subjected to oxidation for 1000 h at 800 °C, or thermal cycling. Before thermal cycling, some specimens are pre-oxidized to create a thick oxide scale to mimic the scale thickness expected after ~30 kh operation. In all cases, the coating and oxide scale remain well adhered with no cracking observed. Area-specific resistance (ASR) is monitored in both single-atmosphere and dual-atmosphere conditions, and the ASR is stable and is not impacted by dynamic cycling of the current density. Finally, this work provides confidence that the MCO coated interconnect will function as needed in dynamic operation conditions, even with coating defects.

08 HYDROGEN↗
DOE OSTI2021

Cubic to hexagonal tuning in Fe 2 Mn(Si 1– x Ge x ) Heusler alloys

Here, the competition between the stability of the cubic and hexagonal full Heusler alloys and the implications concerning their magnetic properties were systematically studied through the detailed structural and magnetic characterization of the Fe 2 Mn(Si 1– x Ge x ) system. This system was specifically chosen as the parent compositions are cubic ( x = 0) and hexagonal ( x = 1). It is found that the formation of hexagonal phases occurs for the x ≥ 0.6 samples, whereas its phase fraction monotonically increases with x until the pure hexagonal Fe 2 MnGe is formed. The change in structure results in high sensitiveness of both the saturation of magnetization ($M_S$) and Curie temperature ($T_C$) with x values, related to a strong magnetocrystalline anisotropy of the hexagonal phase. Both cubic and hexagonal magnetic features were qualitatively reproduced by Density Functional Theory (DFT) calculations. This work provides an experimental and theoretical foundation for further design of Heusler systems with controlled structures and magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Surface enhanced performance of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ cathodes by infiltration Pr-Ni-Mn-O progress

Herein the present study reports the enhancement of electrochemical oxygen reduction activity of porous La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3–δ (LSCF) cathodes by coating a thin film of Pr-Ni-Mn oxide (PNM5) using a multi-step infiltration process. XRD examination reveals that PNM5 mainly contains a multiphase mixture of Pr 6 O 11 , PrNiO 3 , MnO and NiO. SEM morphology shows a thin PNM5 film and small particles are formed on the surface of LSCF backbone particles. Impedance spectrum analysis indicates that PNM5 infiltrated LSCF exhibits dramatically reduced polarization resistance (R p ), reaching R p of 0.244 Ω cm 2 at 973 K, which is one-half of the baseline LSCF cathode. The activation energy of LSCF cathodes infiltrated with PNM5 is 1.45 eV, slightly lower than the baseline LSCF cathode (1.77 eV). Distribution of relaxation time (DRT) function analysis shows PNM5 infiltration layer significantly promotes the oxygen reduction reaction (ORR) of cathode surface. With the increase in firing temperature, the total resistance increases and R p changes from ion transport to oxygen reduction reaction. Degradation rate of the PNM5-infiltrated LSCF is also lower, 0.02168% vs 0.07093% for the baseline LSCF over a 200-h period. A single cell testing indicated that the peak power density of the PNM5-infiltrated cell was increased by 140.66%. Overall, PNM5 could be a potential catalyst for boosting the performance of a commercial LSCF cathode for solid oxide fuel cells (SOFC).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effects of carbon substitution on magnetic properties and magnetocaloric effects in Mn 65-x Ga 17 C 18+x compounds

This study involved the tuning of the magnetic, magnetocaloric, and room-temperature structural properties of Mn 65-x Ga 17 C 18+x (0 ≤ x ≤ 4) compounds prepared using a high-energy ball milling (HEBM) technique. This study indicates that the crystal structure of all the compounds can be described as an anti-perovskite cubic structure with the Pm-3m space group and the crystal cell volume decreases with increasing carbon concentration. The system shows a first-order structural phase transition at a temperature T=T M between two cubic phases having different magnetic structures. The phases are characterized by antiferromagnetic (AFM) and ferromagnetic (FM) -like behavior at low (T < T M ) and high (T M > T) temperature regions, respectively. A suppression of the AFM phase was observed with increasing C concentration. The temperature-induced first-order transitions (FOTs) were found to possess a small thermal hysteresis in the magnetization (~2-3 K) in an applied magnetic field of H = 50 kOe. Magnetic entropy changes estimated from isothermal magnetization curves indicate that the largest value of the magnetic entropy change of |ΔS M | = 2.1 J kg -1 K -1 for x = 4 with ΔH = 50 kOe, with a relative cooling power (RCP) of ~190 J kg -1 . Furthermore, high-energy ball milling (HEBM), a scalable technique, has been demonstrated as a viable method to synthesize magnetocaloric materials with substantial RCP values.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High-performance LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

The commercialization of nickel-rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) has been hindered by its continuous loss of practical capacity and reduction in average working voltage. To address these issues, surface modification has been well-recognized as an effective strategy. Different from the coatings reported in literature to date, in this work, we for the first time report a sulfide coating, amorphous Li 2 S via atomic layer deposition (ALD). Here, our study revealed that the conformal nano-Li 2 S coating shows exceptional protection over the NMC811 cathodes, accounting for the dramatically boosted capacity retention from ~11.6% to ~71% and the evidently mitigated voltage reduction from 0.39 to 0.18 V after 500 charge–discharge cycles. In addition, the Li 2 S coating remarkably improved the rate capability of the NMC811 cathode. Our investigation further revealed that all these beneficial effects of the ALD-deposited nano-Li 2 S coating lie in the following aspects: (i) maintain the mechanical integrity of the NMC811 electrode; (ii) stabilize the NMC electrode/electrolyte interface; and (iii) suppress the irreversible phase transition of NMC structure. Particularly, this study also has revealed that the nano-Li 2 S coating has played some unique role not associated with traditional non-sulfide coatings such as oxides. In this regard, we disclosed that the Li 2 S layer has reacted with the released O 2 from the NMC lattices, and thereby has dramatically mitigated electrolyte oxidation and electrode corrosion. Thus, this study is significant and has demonstrated that sulfides may be an important class of coating materials to tackle the issues of NMCs and other layered cathodes in lithium batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Intrinsic two-way shape memory effect in a Ni-Mn-Sn metamagnetic shape memory microwire

We report an intrinsic two-way shape memory effect with a fully recoverable strain of 1.0% was achieved in an as-prepared Ni 50 Mn 37.5 Sn 12.5 metamagnetic shape memory microwire fabricated by Taylor-Ulitovsky method. This two-way shape memory effect is mainly owing to the internal stress caused by the retained martensite in austenite matrix, as revealed by transmission electron microscopy observations and high-energy X-ray diffraction experiments. After superelastic training for 30 loading/unloading cycles at room temperature, the amount of retained martensite increased and the recoverable strain of two-way shape memory effect increased significantly to 2.2%. Furthermore, a giant recoverable strain of 11.2% was attained under a bias stress of 300 MPa in the trained microwire. These properties confer this microwire great potential for micro-actuation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Determination of Ce 3+ , Co 2+ , Mn 2+ and Fe 2+ diffusion coefficients in Nafion® membrane

Concentration gradient diffusion coefficients for Ce 3+ , Co 2+ , Mn 2+ and Fe 2+ cations are determined in Nafion®211 membranes over a wide range of environmental conditions. Measurements are made using finite-width cation-rich bands introduced to NR211 via a hot-pressing procedure. A robust method of accurate diffusion coefficient determination of the finite-width deposits is developed using a Fick's second law of diffusion solution for one-dimensional systems. The transition metal dications are found to have nearly identical NR211 diffusion coefficients under water saturated conditions over the 22–80 °C range. The powerful chemical mitigant, Ce 3+ , is about one-half as diffusive as the dications under identical conditions. Derived diffusion coefficients for Ce 3+ and Co 2+ are found to be independent of initial cation concentration over the range of 12.5–70 mol% exchange level. The diffusion behavior of Ce 3+ in 80 °C liquid water and saturated water vapor is identical. The diffusion coefficients of Ce 3+ are shown to have a strong dependence on membrane hydration level varying by a factor of more than 30 over the range of 95 to 40% RH. Finally, the implications of these new diffusion findings are applied to a discussion of potential guidelines for the development of highly durable fuel cell systems, which employ mobile metal cations as lifetime-extending redox stabilizers.

08 HYDROGEN↗
DOE OSTI2026

Tetrahedral Zn 2+ doping LiNi 0.6 Mn 0.2 Co 0.2 O 2 improves discharge capacity retention by altering surface Ni valence during cycling and preventing oxygen evolution

5 mol-% Zn 2+ was added to the co-precipitation synthesis of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) to understand Zn's effect on the structural and electronic properties of NMC622. Zn is determined to successfully dope into the NMC crystal lattice as there is an increase in d-spacing along the [003], [104], and [110] directions and an increase in molar volume (100.75 cm 3 mol -1 for NMC622 and 101.00 cm 3 mol -1 for Zn-NMC). Through XPS, Zn is determined to dope on the tetrahedral 6c Wyckoff site in the NMC structure and TEM-EDS reveals that despite a slight ZnO impurity phase, 1.4 mol-% Zn successfully dopes into the crystal structure. Furthermore, cyclic voltammetry shows a suppressed anodic wave associated with oxygen evolution and EIS demonstrates that Zn-doped NMC decreases charge transfer resistance and increases Li diffusion by an order of magnitude. After the formation cycles, NMC has a higher 1 C accessible capacity, 141 mAh/g, over Zn-NMC (132 mAh/g), but after long term cycling Zn-NMC has a higher accessible capacity (117 mAh/g compared to 96 mAh/g for NMC) and increases discharge capacity retention by 18% leading to longer cycle life.

Electrochemistry↗
DOE OSTI2020

Effect of copper content on the tensile elongation of Al–Cu–Mn–Zr alloys: Experiments and finite element simulations

Microstructures of cast aluminum alloys used in automotive engine applications often consist of intermetallic particles that can impact the tensile elongation of these alloys. Here in this paper, we investigate the effect of intermetallic grain boundary particles on tensile elongation by fabricating a series of alloys with Cu content varying between 6.0 - 9.0 wt% in cast Al–Cu–Mn–Zr (ACMZ) type compositions. The tensile elongation of as-aged ACMZ alloys decreases monotonically with increase in Cu content. While the microstructure within the grains and yield stress of the alloy remains invariant with Cu content, the decrease in tensile elongation correlates well with increase in the size and volume fraction of grain boundary particles. Microstructural observations are combined with finite element simulations to explain the trend in tensile elongation with changing Cu content. Crack initiation is found to occur by brittle fracture of the grain boundary particles. Increase in particle size promotes crack initiation by reduction in size dependent particle fracture strength. Lower inter-particle spacing at higher particle volume fraction further facilitates crack initiation by increasing stress within the particles caused by the interaction between stress fields of neighboring particles. Increase in particle volume fraction also accelerates crack propagation through the formation of macro shear zones in the microstructure. The increase in Cu content of cast ACMZ alloys, therefore, decreases tensile elongation by promoting both crack initiation and crack propagation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the exceptionally high ductility of Mg–2Zn-0.3Ca-0.2Ce-0.1Mn alloy

A newly developed Mg–2Zn-0.3Ca-0.2Ce-0.1Mn (in weight %, ZXEM2000) wrought alloy exhibits an exceptionally high tensile ductility (29% ± 1.4% tensile elongation) along the rolling direction at room temperature. In this work, we investigated the fundamental plastic deformation mechanisms that can contribute to the high ductility of ZXEM2000. Scanning electron microscopy and transmission electron microscopy were carried out at selected strain levels to characterize the microstructural evolution. Compared with the deformed microstructures from the hot-rolled pure Mg and Mg–3Al–1Zn alloy at similar conditions, our results revealed that the high ductility of ZXEM2000 could be attributed to four key factors: weaker texture, fine grain size, reduced twinning, and increased cross-slip frequency of < c +a > dislocation. Furthermore, these direct observations offer a key insight into improving ductility of magnesium alloys for future alloy design and development.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of grain-boundary θ-Al 2 Cu precipitates on tensile and compressive creep properties of cast Al–Cu–Mn–Zr alloys

Tensile and compressive creep tests were performed at 300 °C on high-temperature Al–Cu–Mn–Zr (ACMZ) alloys with 6 wt% Cu (6Cu) and 9 wt% Cu (9Cu) to evaluate the effect on creep properties of micron-size θ-Al 2 Cu intergranular precipitates. For compressive creep, the increased volume fraction of θ-precipitates at grain boundaries (from ~0.7% in 6Cu to ~ 6% in 9Cu) does not affect deformation rates across the investigated stress range of 15–110 MPa, consistent with creep being controlled by submicron θ'-Al 2 Cu precipitates within grains, whose size and fractions are the same in both alloys. In contrast, for tensile creep, 9Cu creeps faster than 6Cu at stresses above 20 MPa, and this difference increases with the stress level. Additionally, this discrepancy between tensile and compressive creep behavior is explained by cavitation during tensile creep, which is favored by higher volume fraction and larger size of intergranular θ precipitates in 9Cu. Conversely, larger precipitates impede cavity linkage resulting in improved creep ductility of 9Cu as compared to 6Cu at 300 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In-situ neutron diffraction investigation of two-stage martensitic transformation in a 13%Mn steel with serrated deformation

Two stage austenite →ε-martensite →α-martensite phase transformation, phase-specific lattice strain evolution and load sharing during tensile deformation of a 13%Mn hot-rolled austenitic steel are revealed by in-situ neutron diffraction. In conclusion, direct evidence is provided that serrated deformation behavior is attributed to discontinuous martensitic transformation.

Austenitic steel↗