Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mathematical optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

An optimal control approach to the design of moving flight simulators

An abstract flight simulator design problem is formulated in the form of an optimal control problem, which is solved for the linear-quadratic-Gaussian special case using a mathematical model of the vestibular organs. The optimization criterion used is the mean-square difference between the physiological outputs of the vestibular organs of the pilot in the aircraft and the pilot in the simulator. The dynamical equations are linearized, and the output signal is modeled as a random process with rational power spectral density. The method described yields the optimal structure of the simulator's motion generator, or 'washout filter'. A two-degree-of-freedom flight simulator design, including single output simulations, is presented.

Sivan, R.↗

Stochastic growth logistic model with aftereffect for batch fermentation process

In this paper, the stochastic growth logistic model with aftereffect for the cell growth of C. acetobutylicum P262 and Luedeking-Piret equations for solvent production in batch fermentation system is introduced. The parameters values of the mathematical models are estimated via Levenberg-Marquardt optimization method of non-linear least squares. We apply Milstein scheme for solving the stochastic models numerically. The effciency of mathematical models is measured by comparing the simulated result and the experimental data of the microbial growth and solvent production in batch system. Low values of Root Mean-Square Error (RMSE) of stochastic models with aftereffect indicate good fits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intrusive Uncertainty Quantification and Optimal Experiment Design in the Open-Source Pyomo Ecosystem

This contribution describes ParmEst and Pyomo.DoE, two pillars of the open-source Python-based Pyomo ecosystem for computational optimization with (partial differential) algebraic equation mathematical models. Specifically, ParmEst facilitates intrusive frequentist parameter estimation (PE) and uncertainty quantification (UQ) through built-in features, such as covariance matrix estimation, bootstrapping, and likelihood ratio tests. Complementary, Pyomo.DoE enables optimal experiment design by maximizing various metrics of the Fisher information matrix, such as A-optimality (trace), D-optimality (determinant), E-optimality (minimum eigenvalue), and ME-optimality (condition number). ParmEst and Pyomo.DoE can solve high-dimensional optimization problems by leveraging the model structure and exact derivative information. Finally, we will discuss future opportunities to integrate PE and UQ capabilities with optimization under uncertainty, including robust optimization with non-convex models via PyROS.

97 MATHEMATICS AND COMPUTING↗

OTIS 3.2 Software Released

Trajectory, mission, and vehicle engineers concern themselves with finding the best way for an object to get from one place to another. These engineers rely upon special software to assist them in this. For a number of years, many engineers have used the OTIS program for this assistance. With OTIS, an engineer can fully optimize trajectories for airplanes, launch vehicles like the space shuttle, interplanetary spacecraft, and orbital transfer vehicles. OTIS provides four modes of operation, with each mode providing successively stronger optimization capability. The most powerful mode uses a mathematical method called implicit integration to solve what engineers and mathematicians call the optimal control problem. OTIS 3.2, which was developed at the NASA Glenn Research Center, is the latest release of this industry workhorse and features new capabilities for parameter optimization and mission design. OTIS stands for Optimal Control by Implicit Simulation, and it is implicit integration that makes OTIS so powerful at solving trajectory optimization problems. Why is this so important? The optimization process not only determines how to get from point A to point B, but it can also determine how to do this with the least amount of propellant, with the lightest starting weight, or in the fastest time possible while avoiding certain obstacles along the way. There are numerous conditions that engineers can use to define optimal, or best. OTIS provides a framework for defining the starting and ending points of the trajectory (point A and point B), the constraints on the trajectory (requirements like "avoid these regions where obstacles occur"), and what is being optimized (e.g., minimize propellant). The implicit integration method can find solutions to very complicated problems when there is not a lot of information available about what the optimal trajectory might be. The method was first developed for solving two-point boundary value problems and was adapted for use in OTIS. Implicit integration usually allows OTIS to find solutions to problems much faster than programs that use explicit integration and parametric methods. Consequently, OTIS is best suited to solving very complicated and highly constrained problems.

Riehl, John P.↗

Extremal trajectories in a nilpotent sub-Riemannian problem on the Engel group

On the Engel group a nilpotent sub-Riemannian problem is considered, a 4-dimensional optimal control problem with a 2-dimensional linear control and an integral cost functional. It arises as a nilpotent approximation to nonholonomic systems with 2-dimensional control in a 4-dimensional space (for example, a system describing the navigation of a mobile robot with trailer). A parametrization of extremal trajectories by Jacobi functions is obtained. A discrete symmetry group and its fixed points, which are Maxwell points, are described. An estimate for the cut time (the time of the loss of optimality) on extremal trajectories is derived on this basis. Bibliography: 25 titles.

97 MATHEMATICS AND COMPUTING↗

Modeling the Strategic Behavior of an Active Distribution Network in the ISO Markets

With increasing integration of distributed energy resources (DERs), active distribution networks (ADNs) can actively participate in the electricity markets by dispatching their DERs, which can change the existing electricity market paradigm. It is essential to investigate the strategic behaviors of ADNs and their DER dispatch when they participate in the wholesale market as price-makers. This paper proposes a bi-level optimization model to study the strategic behavior of an ADN in both energy and reserve markets. The optimal scheduling of DERs in the ADN is modeled as the upper level problem and the joint energy and reserve market-clearing of the ISO is modeled as the lower-level problem. The two-level optimization models exchange bidding information and energy/reserve prices with each other. The proposed bi-Ievel optimization problem is converted to a mathematical programming with equilibrium constraints (MPEC) by using Karush-Kuhn Tucker (KKT) conditions and strong duality theory. Further, the MPEC problem is reformulated as a computationally-solvable mixed integer second order cone programming (MISOCP) model. The simulation results on an illustrative case demonstrate the impact of the strategic bidding of the ADN on the day-ahead energy and reserve market prices.

active distribution network↗

Effect of Tool Temperature on Microstructure and Properties of Tailored Hot Stamping Components

Traditional boron steel hot stamping technology can achieve components with full martensite and tensile strength of 1500 MPa. However, fully martensitic hot stamped components exhibit very low level of ductility and are rarely used in energy absorbing structures. Hot stamping with segmented heating and cooling tool can obtain multiphase quenched structures and the tailored mechanical properties. Hot stamping experiment of U-shape component was performed with segmented heating and cooling tool. Mechanical properties of the formed component were measured, and scanning electron microscope and color tint etching were used to quantify the quenched phases achieved under different tool temperatures. The results showed that hardness value decreased from 470 to 230 HV and tensile strength reduced about 50% from 1406 to 730 MPa and elongation increased from 4.19 to 10.20% as tool temperatures increased from 25 to 500 °C. Meanwhile, martensite decreased from 85 to 30% and bainite increased from 12 to 55%, and there was also a small increase in ferrite. In order to get the influence of quenched phases on the strength and hardness of tailored hot stamped component, linear fitting optimization was used to establish mathematical models for area fraction of quenched phases and strength and hardness.

36 MATERIALS SCIENCE↗

Optimization-based, property-preserving finite element methods for scalar advection equations and their connection to Algebraic Flux Correction

In this paper, we continue our efforts to exploit optimization and control ideas as a common foundation for the development of property-preserving numerical methods. Here we focus on a class of scalar advection equations whose solutions have fixed mass in a given Eulerian region and constant bounds in any Lagrangian volume. Our approach separates discretization of the equations from the preservation of their solution properties by treating the latter as optimization constraints. This relieves the discretization process from having to comply with additional restrictions and makes stability and accuracy the sole considerations in its design. A property-preserving solution is then sought as a state that minimizes the distance to an optimally accurate but not property-preserving target solution computed by the scheme, subject to constraints enforcing discrete proxies of the desired properties. Furthermore, we consider two such formulations in which the optimization variables are given by the nodal solution values and suitably defined nodal fluxes, respectively. A key result of the paper reveals that a standard Algebraic Flux Correction (AFC) scheme is a modified version of the second formulation obtained by shrinking its feasible set to a hypercube. In conclusion, we present numerical studies illustrating the optimization-based formulations and comparing them with AFC

97 MATHEMATICS AND COMPUTING↗

Gray-Box Modeling for Distribution Systems With Inverter-Based Resources: Integrating Physics-Based and Data-Driven Approaches

Here, in this paper, we develop a novel gray-box modeling approach for distribution systems with inverter-based resources (IBRs). The proposed gray-box modeling method aims to improve estimation accuracy by taking advantages of both physics-based (white-box) and data-driven (black-box) modeling approaches. To this end, we utilize partial physical knowledge of the system, including the inverters’ structures and control diagrams, as well as the equivalent network model simplified through Kron reduction. The white-box model containing unknown parameters is then constructed with mathematical equations and an optimization-based method is subsequently employed to identify these unknown parameters within the white-box model. Next, the graybox modeling framework is then constructed by embedding the output variables of the white-box model into the input vector of a black-box model (represented using a neural network). Finally, the black-box section is trained using the collected input-output datasets and the gray-box model is then obtained. Furthermore, case studies demonstrate that our gray-box modeling approach effectively improves estimation accuracy compared to purely physics-based or data-driven methods.

42 ENGINEERING↗

Modal phase measuring deflectometry

Here in this work, a model based method is applied to phase measuring deflectometry, which is named as modal phase measuring deflectometry. The height and slopes of the surface under test are represented by mathematical models and updated by optimizing the model coefficients to minimize the discrepancy between the reprojection in ray tracing and the actual measurement. The pose of the screen relative to the camera is pre-calibrated and further optimized together with the shape coefficients of the surface under test. Simulations and experiments are conducted to demonstrate the feasibility of the proposed approach.

42 ENGINEERING↗

Use of a New Analytical Model To Match Production Data and Identify Opportunities To Maximize Well Productivity in the Tuscaloosa Marine Shale Reservoir

The low productivity of the oil wells in the Tuscaloosa Marine Shale (TMS) Trend, located in Louisiana and Mississippi, is a mystery. Production data from 55 wells in the TMS Trend were analyzed to identify possible means of enhancing well productivity. The -1/2 slope in a log–log plot for reservoir linear flow (RLF) was observed for some wells, but not all, and the -1 slope for boundary–dominated flow (BDF) has not been seen in the past 5 years of production. The behavior of the TMS wells is attributed to the ultralow permeability of the TMS matrix and the decline of fracture conductivity, both of which delay the BDF. On the basis of the concept of the distance of investigation, derived from the radius–of–investigation concept, the matrix permeability of the seven TMS wells was estimated to be between 34 and 65 nd, with an average of 51 nd. A new mathematical model for production decline of multifractured horizontal wells was developed taking into consideration the time–dependent fracture conductivity during the BDF period. This model fits TMS–well production data, with an average error of 6.12% and an R2 value of 0.96. Assuming constant matrix permeability, fitting the new model to the production data in the BDF period gives a rate of fracture–conductivity decline of between 0.20 and 0.74% per month. The new mathematical model reveals opportunities to optimize well completion to enhance well productivity in the TMS Trend. For a given amount of fracture proppant allocated to a well, the shortest possible fracture spacing should be used to maximize well productivity. If the number of fractures is fixed as a constraint of well completion design, well productivity is inversely proportional to the square root of fracture spacing (i.e., if the fracture spacing is shortened by fourfold, well productivity is expected to double). If the horizontal wellbore length is fixed as a constraint of well completion, well productivity is inversely proportional to fracture spacing (i.e., if the fracture spacing is shortened by 50%, well productivity is expected to double).

Engineering↗

Optimal stochastic control.

Optimal stochastic control, discussing dynamic mathematical models described by differential equations

Wonham, W. M.↗

Design of structures for optimum geometry

A general method is proposed for geometric optimization of finite element structures on the assumption that a reasonable initial geometry is specified. The number of finite elements, number of joints, and the element-joint relationships are specified and are not changed during the optimization process. The structure may be statically indeterminate and may support multiple loading conditions. Design variables include geometric and member sizing parameters. Design objectives may be minimum weight or cost, and constraints include strength and stiffness limitations. The optimization procedure is a general mathematical programming approach. An iterative design algorithm is outlined, and the method is specialized for truss structures. Design examples are given.

Vanderplaats, G. N.↗

Development of methodology for optimum design of structures at elevated temperatures

This paper surveys a number of activities aimed at applying optimum design techniques to structures where high temperatures are important design considerations. An improved variant of fully-stressed design (FSD), denoted thermal fully-stressed design (TFSD), is described which converges significantly faster than FSD for problems where thermal stresses are comparable in magnitude to mechanical stresses. Second, an optimality criterion is described for sizing structures subjected to temperature constraints. Simultaneous requirements on strength and temperatures are handled by two different techniques: (1) a state-of-the-art mathematical programming method and (2) the optimality criterion technique for temperature constraints combined with FSD for strength constraints. A method is described to optimize the insulation and ply thicknesses of an insulated composite panel with a time-varying temperature applied to the outer surface of the insulation and a general set of in-plane loads applied to the panel.

Adelman, H. M.↗

Multivariate approximation methods and applications to geophysics and geodesy

The first report in a series is presented which is intended to be written by the author with the purpose of treating a class of approximation methods of functions in one and several variables and ways of applying them to geophysics and geodesy. The first report is divided in three parts and is devoted to the presentation of the mathematical theory and formulas. Various optimal ways of representing functions in one and several variables and the associated error when information is had about the function such as satellite data of different kinds are discussed. The framework chosen is Hilbert spaces. Experiments were performed on satellite altimeter data and on satellite to satellite tracking data.

Munteanu, M. J.↗