Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MIXTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Instability of a solidifying binary mixture

An analysis is performed on the stability of a solidifying binary mixture due to surface tension variation of the free liquid surface. The basic state solution is obtained numerically as a nonstationary function of time. Due to the time dependence of the basic state, the stability analysis is of the global type which utilizes a variational technique. Also due to the fact that the basic state is a complex function of both space and time, the stability analysis is performed through numerical means.

Antar, B. N.↗

The dynamic tensile strength of ice and ice-silicate mixtures

The dynamic tensile strength of icy media is measured at strain rates on the order of 10,000/sec to aid in the understanding of impact and cratering phenomena. Compressed samples consisting of ice and ice-silicate mixtures with 5 and 30 wt % sand were impacted at temperatures between 230 and 250 K by projectile plexiglas plates imparting the required strain rates in less than 0.75 microsec. Taking the tensile stress corresponding to the transition from intact to spalled or fragmented samples as the dynamic tensile strength, strengths of 17, 20 and 22 MPa were obtained for the pure ice, 5 wt % sand, and 30 wt % sand specimens, respectively. The values lie considerably above those observed in static testing. A continuum fracturing model is used to obtain relations between tensile strength and stress rate as well as to derive stress and damage histories during tensile loading and the size distribution of icy fragments as a function of strain rate.

Lange, M. A.↗

Catalytic Combustion of Propane/Air Mixtures on Platinum

A honeycomb catalyst of platinum (4.2 kg/cu m loading) over cordierite, with gamma-alumina washcoat, a cross section of 2.4 x 2.4 sq cm, a length of 7.6 cm, and a characteristic channel diameter of 1.4 mm is used as a steady flow reactor. Measurements are made with C3H8/air mixtures at 650 to 800 K inlet temperatures, 110 KPa pressure, 10 to 40 m/s inlet velocity, 0.19 to 0.32 equivalence ratios, and approximately 1.5 mole percent water content. The measured quantities are the substrate tempeature at ten axial locations, the exhaust gas temperature, the exhaust concentrations of CO, CO2, O2, and total hydrocarbons, and the pressure drop across the monolith. The measured quantities are compared with those computed with a two-dimensional steady-state model for axial and radial convection and diffusion of mass, momentum, energy and homogeneous (three overall reactions) and heterogeneous (infinitely fast) reactions. It is found that, under the tested conditions, most of the fuel is converted to CO2 and H2O at the surface. Gas-phase reactions tend rapidly to become more important as the temperature and equivalence ratio are increased and the flow velocity is decreased. Surface fuel conversion is much more rapid than fuel diffusion, resulting in diffusion-controlled oxidation.

Bruno, C.↗

Mixture Models for Dependent Observations

Parametric mixture models appropriate for data presented in homogeneous blocks of varying sizes from several unidentified source populations are considered. For most applications, the data elements within each block are dependent. Models are proposed for multivariate normal data incorporating two types of dependence, exchangeability of elements within blocks, and a Markov structure for blocks. The consequences of assuming exchangeability, when in fact the Markov structure holds, are explored. Computational problems for each model are considered, and results of a simple test of the exchangeability hypothesis for LANDSAT data are presented.

Peters, C.↗

Spontaneous ignition characteristics of gaseous hydrocarbon-air mixtures

Experiments are conducted to determine the spontaneous ignition delay times of gaseous propane, kerosine vapor, and n-heptane vapor in mixtures with air, and oxygen-enriched air, at atmospheric pressure. Over a range of equivalence ratios from 0.2 to 0.8 it is found that ignition delay times are sensibly independent of fuel concentration. However, the results indicate a strong dependence of delay times on oxygen concentration. The experimental data for kerosine and propane demonstrate very close agreement with the results obtained previously by Mullins and Lezberg respectively.

Freeman, G.↗

Viscosity of rock-ice mixtures and applications to the evolution of icy satellites

Theory and experiments are used to establish lower and upper bounds on the ratio of actual viscosity to pure ice viscosity for a suspension of rock particles in a water ice matrix. A rheological model for rock-ice mixtures is described, establishing bounds for the range of possible viscosity enhancements provided by a suspension of silicate spheres in an ice matrix. A parametrized thermal convection model is described and used to determine a criterion for criticality, defined as the heat flow and/or silicate volume fraction for which the satellite temperature profile intercepts the melting curve of water ice. The consequences of achieving this critical state are examined, and it is shown that under certain circumstances a 'runaway' differentiation can occur in which the silicates settle to form a core and extensive melting of water ice takes place, the latent heat being supplied by the gravitational energy of differentiation. A possible application of these results to Ganymede and Callisto is described.

Friedson, A. J.↗

Spectral properties of mixtures of montmorillonite and dark grains - Implications for remote sensing minerals containing chemically and physically adsorbed water

The spectral properties from 0.4 to 3 microns of montmorillonite plus dark carbon grains (called opaques) of various sizes are studied as a function of the weight fraction of opaques present. The reflectance level and band depths of the 1.4-, 1.9-, 2.2-, and 2.8-micron water and/or OH absorption features are analyzed using derived empirical relationships and scattering theory. It is found that the absorption band depths and reflectance level are a very nonlinear function of the weight fraction of opaques present but can be predicted in many cases by simple scattering theory. The 2.8-micron bound water fundamental band is the most difficult absorption feature to suppress. The overtone absorptions are suppressed a greater amount than the fundamental but are still apparent even when 10-20 wt pct opaques are present. The relationships observed and the simple scattering theory presented show that quantitative compositional remote sensing studies are feasible for surfaces containing complex mineral mixtures.

Clark, R. N.↗

Turbidity very near the critical point of methanol-cyclohexane mixtures

The turbidity of a critical mixture of methanol and cyclohexane has been measured extremely close to the consolute point. The data span the reduced-temperature range between 10 to the -7th and 10 to the -3d, which is two decades closer to Tc than previous measurements. In this temperature range, the turbidity varies approximately as 1nt, as expected from the integrated form for Ornstein-Zernike scattering. A thin cell (200-micron optical path) with a very small volume (0.08 ml) was used to avoid multiple scattering. A carefully controlled temperature history was used to mix the sample and to minimize the effects of critical wetting layers. The data are consistent with a correlation-length amplitude of 3.9 plus or minus 1.0 A, in agreement with the value 3.5 A calculated from two-scale-factor universality and heat-capacity data from the literature.

Kopelman, R. B.↗

Ice-Soil Mixtures: Visual and Near-Infrared Remote Sensing Techniques

The spectral properties of ice soil mixtures are reviewed. Water ice has an absorption coefficient which varies by several orders of magnitude in the visual and near infrared, and has several prominent overtone absorptions. Different wavelengths can be used to probe to different depths in the surface as well as for different mineral impurity concentrations. Empirical and/or theoretical models might be used to derive characteristics grain size of the ice or of the impurity minerals and to derive abundance of the ice and rock or soil components. Quantitative analysis of remotely obtained reflectance spectra can only be performed by using absorption features in the spectra of ice and soil, and not by broadband response. It is suggested that this might be done by special selection of several narrow band filters in the near infrared which will adequately define the ice absorptions.

Clark, R. N.↗

High altitude chemically reacting gas particle mixtures. Volume 1: A theoretical analysis and development of the numerical solution

The overall contractual effort and the theory and numerical solution for the Reacting and Multi-Phase (RAMP2) computer code are described. The code can be used to model the dominant phenomena which affect the prediction of liquid and solid rocket nozzle and orbital plume flow fields. Fundamental equations for steady flow of reacting gas-particle mixtures, method of characteristics, mesh point construction, and numerical integration of the conservation equations are considered herein.

Smith, S. D.↗

Estimating location parameters in a mixture

The problem of estimating the parameters in a finite mixture is considered. The approach is based on an integral equation formulation of the form h sub t (x) = integral (limits b and a) f(x-y) g sut t (y)dy where h sub t is a smoothed version of h and g sub t is a prior function that tends to be concentrated on the translation values. A solution for g sub t that uses the method of regularization and one based on a posterior operator approach is considered. Numerical simulations are presented to bring out some of the estimation and numerical problems of these approaches.

Heydorn, R. P.↗

Bayesian estimation of normal mixture parameters

A Bayesian, or penalized maximum likelihood, approach to the problem of estimating the parameters of a mixture of multivariate normal distributions is proposed. The Bayesian formulation eliminates the problem of singularities in the likelihood function and results in an attractive EM-like procedure. Although the question of consistency is not settled, it is suggested that the proposed method has certain advantages over both the constrained and unconstrained maximum likelihood procedures.

Peters, C.↗

Theoretical studies of the ignition and combustion of silane-hydrogen-air mixtures

A chemical kinetic mechanism is proposed for the combustion of silane-hydrogen-oxygen-nitrogen mixtures in the initial temperature range from 800K to 1250K and pressure range from 0.5 to 1.35 atm. The mechanism yields results which are in agreement with published ignition delay times obtained from shock tube experiments. Comparisons between the results obtained using the proposed mechanism and that of an alternative mechanism reveal that the former predicts appreciably shorter ignition delay times, but a flame blowout envelope which is shifted so as to decrease the stable flame region. Over much of the thermodynamic range examined, the mechanism predicts long reaction times. A three step global mechanism is proposed which closely models the ignition phase of SiH4 - H2 - air combustion; however, the reaction phase is less well reproduced by the global model. The necessity for additional experimental data to further assess the proposed models is stressed.

Chinitz, W.↗

Sound speed measurements in liquid oxygen-liquid nitrogen mixtures

The sound speed in liquid oxygen (LOX), liquid nitrogen (LN2), and five LOX-LN2 mixtures was measured by an ultrasonic pulse-echo technique at temperatures in the vicinity of -195.8C, the boiling point of N2 at a pressure of I atm. Under these conditions, the measurements yield the following relationship between sound speed in meters per second and LN2 content M in mole percent: c = 1009.05-1.8275M+0.0026507 M squared. The second speeds of 1009.05 m/sec plus or minus 0.25 percent for pure LOX and 852.8 m/sec plus or minus 0.32 percent for pure LN2 are compared with those reported by past investigators. Measurement of sound speed should prove an effective means for monitoring the contamination of LOX by Ln2.

Zuckerwar, A. J.↗

New estimates of asymmetric decomposition of racemic mixtures by natural beta-radiation sources

Some recent calculations that appeared to invalidate the Vester-Ulbricht hypothesis, which suggests that the chirality of biological molecules originates from the beta-radiolysis of prebiotic racemic mixtures, are reexamined. These calculations apparently showed that the radiolysis-induced chiral polarization can never exceed the chiral polarization produced by statistical fluctuations. It is here shown that several overly restrictive conditions were imposed on these calculations which, when relaxed, allow the radiolysis-induced polarization to exceed that produced by statistical fluctuations, in accordance with the Vester-Ulbricht hypothesis.

Hegstrom, R. A.↗

Numerical solution of strong radiation gasdynamic interactions in a hydrogen-seedant mixture

Theoretical and experimental results are provided for the absorption of laser energy by a gas flow. A two-dimensional numerical model described the temperature field, fluid dynamics, variable absorptivity and gas dynamics. The model was tested using a hydrogen-seedant mixture injected with 10.6 micron laser radiation. The laser mix was selected to allow reduced temperature gradients and energy source terms. It was found possible, by varying parameters such as the laser power and flash pressure, to precisely position the peak absorptance region in higher speed flows. More refined models are being tested to achieve accurate absorptance predictions in flows below Mach 0.0001.

Merkle, C. L.↗

Interpretation of AIS Images of Cuprite, Nevada Using Constraints of Spectral Mixtures

A technique is outlined that tests the hypothesis Airborne Imaging Spectrometer (AIS) image spectra are produced by mixtures of surface materials. This technique allows separation of AIS images into concentration images of spectral endmembers (e.g., surface materials causing spectral variation). Using a spectral reference library it was possible to uniquely identify these spectral endmembers with respect to the reference library and to calibrate the AIS images.

Smith, M. O.↗