Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MHD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Acceleration of charged particles in oblique MHD shocks

The motion of high energy charged particles in ideal oblique MHD shocks has been studied extensively. The orbits of charged particles can be solved exactly from Lorentz force equation. It is found that a charged particle may cross the shock front many times before it leaves the shock and it is energized during crossings. The most energetic particles are those with initial pitch and phase near the boundary between crossing and reflected particles. The reflected particles cross the shock about twice as many times as the passing particles do. The energy gain increases for larger values of shock strength and speed. If reflection occurs, the energy gain is larger for smaller angles between the field and shock surface. The introduction of scattering results in a few more higher energy particles.

Chen, G.↗
NASA NTRS1976

Closed cycle MHD power generation experiments using a helium-cesium working fluid in the NASA Lewis Facility

The MHD channel in the NASA Lewis Research Center was redesigned and used in closed cycle power generation experiments with a helium-cesium working fluid. The cross sectional dimensions of the channel were reduced to 5 by 16.5 cm to allow operation over a variety of conditions. Experiments have been run at temperatures of 1900-2100 K and Mach numbers from 0.3 to 0.55 in argon and 0.2 in helium. Improvements in Hall voltage isolation and seed vaporization techniques have resulted in significant improvements in performance. Typical values obtained with helium are Faraday open circuit voltage 141 V (92% of uBh) at a magnetic field strength of 1.7 T, power outputs of 2.2 kw for tests with 28 electrodes and 2.1 kw for tests with 17 electrodes. Power densities of 0.6 MW/cu m and Hall fields of about 1100 V/m were obtained in the tests with 17 electrodes, representing a factor of 18 improvement over previously reported results. The V-I curves and current distribution data indicate that while near ideal equilibrium performance is obtained under some conditions, no nonequilibrium power has been generated to date.

Sovie, R. J.↗
NASA NTRS1976

Results and progress on the NASA Lewis H2-O2 MHD program

A rocket test facility at the NASA Lewis Research Center has been used to develop interelectrode insulating materials, measure heat losses, and determine the fluid dynamic and electrical properties of MHD ducts and the cesium-seeded H2-O2 working fluid. Test results show that flame sprayed ceramic coatings on combustion chamber and nozzle walls permit operation with hot walls, eliminating problems associated with seed condensation; however, the net heat transfer was unexpectedly increased over that of cold copper walls. Pressure disturbances associated with oblique pressure waves were measured in a rocket nozzle designed to achieve low weight rather than perfectly parallel flow at the exit. Electrical conductivity measurements were in good agreement with theory except at low combustion pressures and/or high seed/oxygen mass flow ratios. The discrepancy is thought to result from poor atomization of the seed, producing droplets which do not completely vaporize during their residence time.

Smith, J. M.↗
NASA NTRS1977

Results of closed cycle MHD power generation test with a helium-cesium working fluid

The cross sectional dimensions of the MHD channel in the NASA Lewis closed loop facility were reduced to 3.8 x 11.4 cm. Tests were run in this channel using a helium-cesium working fluid at stagnation pressures of 160,000 n/M2, stagnation temperatures of 2000-2060 K and an entrance Mach number of 0.36. In these tests Faraday open circuit voltages of 200 V were measured which correspond to a Faraday field of 1750 V/M. Power generation tests were run for different groups of electrode configurations and channel lengths. Hall fields up to 1450 V/M were generated. Power extraction per electrode of 183 W and power densities of 1.7 MW/M3 were obtained. A total power output of 2 kW was generated for tests with 14 electrodes. The power densities obtained in this channel represent a factor of 3 improvement over those previously reported for the M = 0.2 channel.

Sovie, R. J.↗
NASA NTRS1977

Spectroscopic determination of electrical conductivity in an MHD duct from absolute intensity measurements

Measurements of the electrical conductivity in the NASA Lewis cesium seeded, H2-O2 MHD duct have been previously reported. In order to corroborate the above measurements and to analyze the possibility of nonuniform seed injection as a cause of the deviations, a spectroscopic investigation of the plasma conductivity has been undertaken. Transverse profiles of the absolute integrated intensity were measured from the optically thin lines of CSI-.5664 microns and .5636 microns. Radial profiles of emission coefficient were obtained from the measured transverse profiles of intensity by Abel inversion. Radial profiles of electrical conductivity were then obtained under two different assumptions. In the first, the Cs seed fraction is assumed uniform and equal to the measured flow rate at the time when the temperature and conductivity were obtained. In the second method, the local temperature and pressure are taken to be those given by a one-dimensional channel calculation including heat transfer and friction. In this case profiles of conductivity and seed fractions are obtained. The results of the two methods are compared to the previously measured conductivity.

Wang, S. Y.↗
NASA NTRS1977

Results of closed cycle MHD power generation tests with a helium-cesium working fluid

The cross-sectional dimensions of the MHD channel in the NASA Lewis closed loop facility have been reduced to 3.8 x 11.4 cm. Tests were run in this channel using a helium-cesium working fluid at stagnation pressures of 1.6 x 10 to the 5th N/sq m, stagnation temperatures of 2000-2060 K and an entrance Mach number of 0.36. In these tests Faraday open circuit voltages of 200 V were measured which correspond to a Faraday field of 1750 V/m. Power generation tests were run for different groups of electrode configurations and channel lengths. Hall fields up to 1450 V/m were generated. Power extraction per electrode of 183 W and power densities of 1.7 MW/cu m have been obtained. A total power output of 2 kW was generated for tests with 14 electrodes. The power densities obtained in this channel represent a factor of 3 improvement over those reported for the m = 0.2 channel at the last EAM Symposium.

Sovie, R. J.↗
NASA NTRS1977

Spectroscopic determination of electrical conductivity in an MHD duct from absolute intensity measurements

Measurements of the electrical conductivity in the NASA Lewis cesium seeded, H2-O2 MHD duct made by applying a voltage across the channel from one end electrode to the other, measuring the current, and using the inner electrodes as probes to monitor the voltage distribution along the channel were found to be in good agreement with theory except at low combustion pressures and/or high ratios of seed/oxygen mass flows. To corroborate these measurements and to analyze the possibility of nonuniform seed injection as a cause of the above deviations, a spectroscopic investigation of the plasma conductivity was undertaken. Radial profiles of emission coefficient were obtained from measured transverse profiles of the absolute integrated intensity by Abel inversion. Radial profiles of electrical conductivity were then obtained under two different assumptions. In the first the Cs seed fraction is assumed uniform and equal to the measured flow rate at the time when the temperature and conductivity were obtained. In the second method the local temperature and pressure are taken to be those given by a one-dimensional channel calculation including heat transfer and friction. The results of the two methods are compared to the previously measured conductivity.

Wang, S. Y.↗
NASA NTRS1978

Velocity, temperature, and electrical conductivity profiles in hydrogen-oxygen MHD duct flows

Two-dimensional duct flow computations for radial distributions of velocity, temperature, and electrical conductivity are reported. Calculations were carried out for the flow conditions representative of a hydrogen-oxygen combustion driven MHD duct. Results are presented for: profiles of developing flow in a smooth duct, and for profiles of fully developed pipe flow with a specified streamwise shear stress distribution. The predicted temperature and electrical conductivity profiles for the developing flows compare well with available experimental data.

Greywall, M. S.↗
NASA NTRS1978

Dynamic MHD modeling of the solar wind disturbances during the August 1972 events

A time-dependent one-dimensional MHD theoretical model is tested by using plasma and magnetic field observations of Pioneer 9 and Pioneer 10 during the August 1972 events on the sun and in the interplanetary medium. These spacecraft were nearly aligned along a common heliocentric radius during these events, considered now to be the most spectacular and best-documented events during solar cycle 20. The observations of Pioneer 9 at 0.78 AU were used as input for the theoretical model. The plasma and magnetic field forcing functions were superimposed upon a preexisting ambient solar wind at this inner boundary, and the response was simulated as far as 8 AU. The simulated output at 2.2 AU is compared directly with the Pioneer 10 observations at 2.2 AU. Qualitative comparison is good, although several limitations of the one-dimensional theory are noted.

Dryer, M.↗
NASA NTRS1978

Axisymmetric ideal MHD stellar wind flow

The ideal MHD equations are reduced to a single equation under the assumption of axisymmetric flow. A variational principle from which the equation is derivable is given. The characteristics of the equation are briefly discussed. The equation is used to rederive the theorem of Gussenhoven and Carovillano.

Heinemann, M.↗
NASA NTRS1978

Dynamic MHD modeling of solar wind corotating stream interaction regions observed by Pioneer 10 and 11

The use of the Pioneer 10 and 11 projects to test an MHD one-dimensional time-dependent model of corotating solar wind streams during the period from Sept. 30 to Nov. 25, 1973 is described. During this period, five or six corotating interaction regions streamed past the two spacecraft, and, as a result of multiple-spacecraft radial alignment and temporally varying conditions at the solar wind source, the pattern predicted by the Steinolfson et al. (1975) model could be compared with observations. The results, in general, support the validity of the model, although the neglect of thermal energy exchange leads to incorrect values for the proton temperature. A detailed analysis of a stream is discussed.

Dryer, M.↗
NASA NTRS1978

Evaluation of the ECAS open cycle MHD power plant design

The Energy Conversion Alternatives Study (ECAS) MHD/steam power plant is described. The NASA critical evaluation of the design is summarized. Performance of the MHD plant is compared to that of the other type ECAS plant designs on the basis of efficiency and the 30-year levelized cost of electricity. Techniques to improve the plant design and the potential performance of lower technology plants requiring shorter development time and lower development cost are then discussed.

Seikel, G. R.↗
NASA NTRS1979

Preliminary results in the NASA Lewis H2-O2 combustion MHD experiment

MHD (magnetohydrodynamic) power generation experiments were carried out in the NASA Lewis Research Center cesium-seeded H2-O2 combustion facility. This facility uses a neon-cooled cryomagnet capable of producing magnetic fields in excess of 5 tesla. The effects of power takeoff location, generator loading, B-field strength, and electrode breakdown on generator performance are discussed. The experimental data is compared to a theory based on one-dimensional flow with heat transfer, friction, and voltage drops.

Smith, J. M.↗
NASA NTRS1979

Performance optimization of an MHD generator with physical constraints

A method to optimize the Faraday MHD generator performance under a prescribed set of electrical and magnet constraints is described. The results of generator performance calculations using this technique are presented for a very large MHD/steam plant. The differences between the maximum power and maximum net power generators are described. The sensitivity of the generator performance to the various operational parameters are presented.

Pian, C. C. P.↗
NASA NTRS1978

Velocity, temperature, and electrical conductivity profiles in hydrogen-oxygen MHD duct flows

This paper presents results of two-dimensional duct flow computations for radial distributions of velocity, temperature, and electrical conductivity. Calculations were carried out for the flow conditions representative of NASA Lewis hydrogen-oxygen combustion driven MHD duct. Results are presented for two sets of computations: (1) profiles of developing flow in a smooth duct, and (2) profiles of fully developed pipe flow with a specified streamwise shear stress distribution. The predicted temperature and electrical conductivity profiles for the developing flows compared well with available experimental data.

Greywall, M. S.↗
NASA NTRS1979

Two-dimensional, time-dependent MHD description of interplanetary disturbances Simulation of high speed solar wind interactions

A two-dimensional, time-dependent nonlinear MHD model is used to simulate the general features of multiply-interacting, transient solar wind flows. The major advantage of the two-dimensional model over the one-dimensional one is the proper consideration of azimuthal gradients. In addition, the new model can provide contour maps for disturbed plasma properties in the equatorial plane, thereby enabling one to perform essential tests of the physical assumptions through direct comparison with space probe data.

Wu, S. T.↗
NASA NTRS1979

Preliminary results in the NASA Lewis H2-O2 combustion MHD experiment

MHD power generation experiments have been carried out in the NASA Lewis Research Center cesium-seeded H2-O2 combustion facility. This facility uses a neon-cooled cryomagnet capable of producing magnetic fields in excess of 5 tesla. The effects of power takeoff location, generator loading, B-field strength, and electrode breakdown on generator performance are discussed. The experimental data is compared to a theory based on one-dimensional flow with heat transfer, friction, and voltage drops.

Smith, J. M.↗
NASA NTRS1979

Results of duct area ratio changes in the NASA Lewis H2-O2 combustion MHD experiment

MHD power generation experiments utilizing a cesium-seeded H2-O2 working fluid were carried out using a diverging area Hall duct having an entrance Mach number of 2. The experiments were conducted in a high field strength cryomagnet facility at field strengths up to 5 tesla. The effects of power takeoff location, generator loading B field strength, and electrode breakdown voltage were investigated. The effect of area ratio, multiple loading of the duct, and duct location within the magnetic field are considered.

Smith, J. M.↗