Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MATRICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data

This dataset includes results from simulations of NREL's hydraulic and electric reverse osmosis wave energy converter (HEREO WEC). Simulation runs include 135 wave cases that were based on the updated WEC-Sim model, which is linked below. The data represented in this repository is based on an updated WEC-Sim model using laboratory data to tune and refine the original WEC-Sim model for the V1.0 HERO WEC. The 135 wave cases represent waves with the following wave height and wave period ranges: - Significant Wave Height: 0.25 - 3.75m in 0.25m increments - Wave Period: 5 - 13 sec in 1 sec increments Each run was simulated using a Pierson-Moskowitz irregular wave spectrum with a 100 second ramp time, a total simulation time of 3,100 seconds, and a simulation time-step of 0.005s. A reference table has been included to map each multi condition run (MCR) case with each wave condition. Summary data set includes a spreadsheet and image files with matrices that are associated with data from simulation runs. All matrices cover the same significant wave height and wave periods from the simulation runs, in the same increments. The following matrices are included: - Power Abs: The average absorbed power from the WEC (calculated from anchor reaction force and heave velocity) - Power Hyd: The average hydraulic power output at pump (calculated from pump output flow and pressure) - Power - Hyd ROi: The average hydraulic power measured at the RO system inlet (calculated from RO system pressure and flow (pre-accumulator)) - Flow - Pump out: The average flowrate measured at the pump outlet - Flow - Perm: The average permeate (clean water) production - Flow - RO (pre): The average flowrate measured at the inlet of the RO system before the accumulators - Flow - RO (post): The average flowrate measured after the accumulator bank in the RO system - Pressure - RO: The average pressure measured at the inlet of the RO system This data set has been developed by the National Renewable Energy Laboratory, operated by the Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding provided by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Water Power Technologies Office.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Experimental Study of Microgel Conformance-Control Treatment for a Polymer-Flooding Reservoir Containing Superpermeable Channels

Summary Polymer flooding has been widely used to improve oil recovery. However, its effectiveness would be diminished when channels (e.g., fractures, fracture-like channels, void-space conduits) are present in a reservoir. In this study, we designed a series of particular sandwich-like channel models and tested the effectiveness and applicable conditions of micrometer-sized preformed particle gels (PPGs, or microgels) in improving the polymer-flooding efficiency. We studied the selective penetration and placement of the microgel particles, and their abilities for fluid diversion and oil-recovery improvement. The results suggest that polymer flooding alone would be inefficient to achieve a satisfactory oil recovery as the heterogeneity of the reservoir becomes more serious (e.g., permeability contrast kc/km > 50). The polymer solution would vainly flow through the channels and leave the majority of oil in the matrices behind. Additional conformance-treatment efforts are required. We tried to inject microgels in an attempt to shut off the channels. After the microgel treatment, impressive improvement of the polymer-flooding performance was observed in some of our experiments. The water cut could be reduced significantly by as high as nearly 40%, and the sweep efficiency and overall oil recovery of the polymer flood were improved. The conditions under which the microgel-treatment strategy was effective were further explored. We observed that the microgels form an external impermeable cake at the very beginning of microgel injection and prevent the gel particles from entering the matrices. Instead, the microgel particles could selectively penetrate and shut off the superpermeable channels under proper conditions. Our results suggest that the 260-µm microgel particles tested in this study are effective to attack the excessive-water-production problem and improve the oil recovery when the channel has a high permeability (>50 darcies). The gels are unlikely to be effective for channels that are less than 30 darcies because of the penetration/transport difficulties. After the gels effectively penetrate and shut off the superpermeable channel, the subsequent polymer solution is diverted to the matrices (i.e., the unswept oil zones) to displace the bypassed oil. Overall, this study provides important insights to help achieve successful polymer-flooding applications in reservoirs with superpermeable channels.

Engineering↗
DOE OSTI2022

Applying Quantum Tomography to Hadronic Interactions

A proper description of inclusive reactions is expressed with density matrices. Quantum tomography reconstructs density matrices from experimental observables. We review recent work that applies quantum tomography to practical experimental data analysis. Almost all field-theoretic formalism and modeling used in a traditional approach is circumvented with great efficiency. Tomographically-determined density matrices can express information about quantum systems which cannot in principle be expressed with distributions defined by classical probability. Topics such as entanglement and von Neumann entropy can be accessed using the same natural language where they are defined. A deep relation exists between separability, as defined in quantum information science, and factorization, as defined in high energy physics. Factorization acquires a non-perturbative definition when expressed in terms of a conditional form of separability. An example illustrates how to go from data for momentum 4-vectors to a density matrix while bypassing almost all the formalism of the Standard Model.

Martens, J. C.↗
DOE OSTI2020

LAW Simulant Recipes for Evaluation of Real-Time, In-Line Monitoring Instruments

Statistically designed recipes were generated for evaluation of in-line instrumentation for the Real-Time In-Line Monitoring (RTIM) program in support of the Hanford Direct-Feed Low Activity Waste (DFLAW) program. The composition matrices were prepared based on Low Activity Waste (LAW) feed vector, melter feed, and Effluent Management Facility (EMF) feed information provided by the flowsheet integration modelling for the DFLAW portion of the Waste Treatment Plant (WTP) mission. These composition matrices were converted to recipes for the LAW feed using the approaches for LAW simulant recipes developed by Savannah River National Laboratory (SRNL). Recipes for the glass forming chemicals (GFCs) were developed based on expected mineral forms to be used to for each element to be added to the recipe. The recipe matrices are shown in the Appendix.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Development of Control System Functional Capabilities within the IES Plug-and-Play Simulation Environment

The concept of an Integrated Energy System (IES) is meant to combine different energy technologies in synergistic ways to achieve a more secure and economical energy supply. The RAVEN-based HYBRID framework is used to find the optimal installed capacity and the optimal economical dispatch of each component of the IES. A new RAVEN (Risk Analysis Virtual ENvironment) plugin for grid and capacity optimization (HERON) has been developed for optimizing the production variables of the IES given the demand profile. Currently, only the limits that affect the production variables and their corresponding time rates of change are considered (explicit constraints). However, other variables are additionally subject to constraints, but the associated limits are not accounted for (implicit constraints). In particular, for the power dispatch problem, the optimization algorithm takes into account the limits on the electrical power output and the corresponding hourly power variations but does not consider other constraints on process variables whose response effects the service life of the IES. This report describes a scheme that allows accounting for implicit constraints without increasing the size of the optimization problem. The Reference Governor (RG) algorithm is traditionally used for enforcing state and control constraints by modifying the set-point trajectories supplied to the feedback regulators. In our application, the RG is coupled within an iterative loop with the HERON-power dispatcher to generate optimal trajectories that ensure the operational constraints are met. A data-driven procedure to derive a representation of the dynamics of the controlled system was developed. First, the variables that represented the state of the system are selected (PCA-based approach), and then state-space representation matrices are derived from the collected measurements (DMDc algorithm). A preliminary version of the developed workflow based on Linear Time Invariant matrices was assessed by adopting a two-unit test case. More sophisticated versions of this workflow foreseeing the on-line derivation of system matrices will be deployed in FY 2021. Finally, a “plug-and-play” library of controllers and state observers was developed in Dymola. Some aspects of the current configuration of the IES unit components, e.g., the encapsulation of the control schemes into dedicated blocks, are consistent with the “plug-and-play” philosophy. Other features, e.g., the system buses collecting the input and the output variables, are not. For this reason, once listed and described the limits of the current configuration, necessary modifications to the plant model interface are presented. As a test-case, the interfaces of the SES model in the RAVEN-based HYBRID framework were reworked accordingly, and two different control schemes were applied to the same plant model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Enhanced Hanford Low-Activity Waste Glass Property Data Development: Phase 5 and Phase 6

This report summarizes the data collected on two test matrices of low-activity waste (LAW) glass compositions intended to expand the composition-property database: Low-Activity Waste (LAW) Phase 5: Expansion of LAW Glass Composition Boundaries and LAW Phase 6: High PCT and VHT Response Glass Matrix. Both matrix glass compositions were statistically designed to expand the LAW glass composition region. The analyses performed on these glasses include chemical composition (for target compositional verification), density, viscosity, electrical conductivity, crystal fraction, container centerline cooling with crystal identification, the product consistency test (PCT) response, the vapor hydration test (VHT) response, and sulfur solubility. Because of the slightly different scope of the two matrices, not all methods were applied to both matrices. Specifically, the following measurements were taken only on the LAW Phase 5: Expansion of LAW Glass Composition Boundaries glasses: crystal fraction as a function of temperature, density (ρ), viscosity (η), and electrical conductivity (EC, e). Combined, these data contribute a significant amount, 51 glasses, to the database for high LAW loaded enhanced waste glasses. Most of these data are focused near the boundaries of acceptable PCT and VHT responses, where prediction uncertainties are most impactful.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Ensemble Simulation Techniques and Fast Randomized Algorithms

The major goals of the project were to develop and analyze new ensemble simulation techniques, including trajectory stratification and preconditioned MCMC techniques, as well as develop fast numerical linear algebra techniques closely related to ensemble simulation ideas. The trajectory stratification techniques involve simulating in parallel short trajectory fragments of a Markov process confined to a specific region of space‐time and then patching together the statistics gathered to assemble estimates of very general dynamical properties. We have also developed this approach for rare event simulation and extended the techniques to applications requiring a more general framework (such as electronic structure calculations). The preconditioned MCMC techniques involve simulating multiple Markov chains in parallel and then using information from the ensemble to speed the mixing of each individual chain. The fast randomized linear algebra methods are motivated by the diffusion Monte Carlo technique, but are applicable to finding the dominant eigenvalue of (almost) general matrices. For most non‐negative matrices, the schemes result in an error (compared to the power method) that is constant in the dimension of the problem. For more general matrices, we see a very clear sublinear cost trend in computational tests.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Data Driven Correlated Noise Simulation for the ICEBERG LArTPC

Accurate electronic-noise simulation is essential for low-energy physics in liquid-argon TPCs. More realistic noise modeling allows us to better tune reconstruction algorithms and more reliably assess and optimize signal-detection thresholds. We present a data-driven noise simulation framework developed for the ICEBERG test stand for DUNE that generates synthetic noise waveforms that reproduce both (i) the measured per-channel magnitude of the Fast Fourier Transform (FFT) and (ii) frequency-dependent channel-to-channel correlations observed in ICEBERG noise data. Using a dedicated noise-only dataset, we build a compact noise model containing per-channel FFT-magnitude targets together with a small set of band-wise cross-wire color matrices. White noise is generated in the frequency domain by drawing circular-symmetric complex Gaussian coefficients with random phases and scaling them to match the measured FFT-magnitude targets, and cross-wire correlations are subsequently imposed using the stored color matrices. The model and algorithm were integrated into the LArSoft + Wire-Cell Toolkit simulation chain and validated by comparing waveform structure, frequency-domain spectra, and band-limited correlation matrices from simulated noise and ICEBERG data. This approach can be extended to other LArTPC operating conditions.

Ghosh, Avik [Iowa State U.]↗
DOE OSTI2021

Genomic Metrics Applied to Rhizobiales ( Hyphomicrobiales ): Species Reclassification, Identification of Unauthentic Genomes and False Type Strains

Taxonomic decisions within the order Rhizobiales have relied heavily on the interpretations of highly conserved 16S rRNA sequences and DNA–DNA hybridizations (DDH). Currently, bacterial species are defined as including strains that present 95–96% of average nucleotide identity (ANI) and 70% of digital DDH (dDDH). Thus, ANI values from 520 genome sequences of type strains from species of Rhizobiales order were computed. From the resulting 270,400 comparisons, a ≥95% cut-off was used to extract high identity genome clusters through enumerating maximal cliques. Coupling this graph-based approach with dDDH from clusters of interest, it was found that: (i) there are synonymy between Aminobacter lissarensis and Aminobacter carboxidus, Aurantimonas manganoxydans and Aurantimonas coralicida, “Bartonella mastomydis,” and Bartonella elizabethae, Chelativorans oligotrophicus, and Chelativorans multitrophicus, Rhizobium azibense, and Rhizobium gallicum, Rhizobium fabae, and Rhizobium pisi, and Rhodoplanes piscinae and Rhodoplanes serenus; (ii) Chelatobacter heintzii is not a synonym of Aminobacter aminovorans; (iii) “Bartonella vinsonii” subsp. arupensis and “B. vinsonii” subsp. berkhoffii represent members of different species; (iv) the genome accessions GCF_003024615.1 (“Mesorhizobium loti LMG 6125T”), GCF_003024595.1 (“Mesorhizobium plurifarium LMG 11892T”), GCF_003096615.1 (“Methylobacterium organophilum DSM 760T”), and GCF_000373025.1 (“R. gallicum R-602 spT”) are not from the genuine type strains used for the respective species descriptions; and v) “Xanthobacter autotrophicus” Py2 and “Aminobacter aminovorans” KCTC 2477T represent cases of misuse of the term “type strain”. Aminobacter heintzii comb. nov. and the reclassification of Aminobacter ciceronei as A. heintzii is also proposed. To facilitate the downstream analysis of large ANI matrices, we introduce here ProKlust (“Prokaryotic Clusters”), an R package that uses a graph-based approach to obtain, filter, and visualize clusters on identity/similarity matrices, with settable cut-off points and the possibility of multiple matrices entries.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1969

GAMBIT program

GAMBIT computer program provides multigroup flux and current averaged neutron cross sections for input to transport programs. The fast neutron compilation includes P/0/ and P/1/ elastic scattering transfer matrices, inelastic scattering matrices, n,2n cross section matrices, absorption and fission cross sections for all isotopes.

Collier, G.↗
NASA NTRS1971

Jones's matrix representation of optical instruments. II - Fourier interferometers /spectrometers and spectropolarimeters/.

Our method of matrix synthesis of optical components and instruments is applied to the derivation of Jones's matrices appropriate for Fourier interferometers (spectrometers and spectropolarimeters). These matrices are obtained for both the source beam and the detector beam. In the course of synthesis, Jones's matrices of the various reflectors (plane mirrors; retroreflectors: roofed mirror, trihedral and prism cube corner, cat's eye) used by these interferometers are also obtained.

Fymat, A. L.↗
NASA NTRS1972

Digital modeling of human operator dynamics via class of Liapunov functions

A technique is described which is utilized for modeling human operator dynamics. The technique is based upon a model-reference system configuration and a class of Liapunov functions formulated for this purpose which possess variable characteristics. It is shown how such a class of Liapunov functions and their time derivatives is formulated. The crux of the formulation lies in three variable positive definite matrices used for the construction of the class of Liapunov functions. The form and order of these matrices depend upon the form and order of the error differential equation of the human operator model-reference system. These matrices can be modified to include nonlinear functions of the human operator model.

Mekel, R.↗
NASA NTRS1973

Rapid iterative reanalysis for automated design

A method for iterative reanalysis in automated structural design is presented for a finite-element analysis using the direct stiffness approach. A basic feature of the method is that the generalized stiffness and inertia matrices are expressed as functions of structural design parameters, and these generalized matrices are expanded in Taylor series about the initial design. Only the linear terms are retained in the expansions. The method is approximate because it uses static condensation, modal reduction, and the linear Taylor series expansions. The exact linear representation of the expansions of the generalized matrices is also described and a basis for the present method is established. Results of applications of the present method to the recalculation of the natural frequencies of two simple platelike structural models are presented and compared with results obtained by using a commonly applied analysis procedure used as a reference. In general, the results are in good agreement. A comparison of the computer times required for the use of the present method and the reference method indicated that the present method required substantially less time for reanalysis. Although the results presented are for relatively small-order problems, the present method will become more efficient relative to the reference method as the problem size increases. An extension of the present method to static reanalysis is described, ana a basis for unifying the static and dynamic reanalysis procedures is presented.

Bhatia, K. G.↗
NASA NTRS1974

Payload/orbiter contamination control requirement study, volume 2, exhibit A

The computer printout data generated during the Payload/Orbiter Contamination Control Requirement Study are presented. The computer listings of the input surface data matrices, the viewfactor data matrices, and the geometric relationship data matrices for the three orbiter/spacelab configurations analyzed in this study are given. These configurations have been broken up into the geometrical surfaces and nodes necessary to define the principal critical surfaces whether they are contaminant sources, experimental surfaces, or operational surfaces. A numbering scheme was established based upon nodal numbers that relates the various spacelab surfaces to a specific surface material or function. This numbering system was developed for the spacelab configurations such that future extension to a surface mapping capability could be developed as required.

Bareiss, L. E.↗
NASA NTRS1975

Finite-element solution for a combined radiative-conductive analysis with mixed diffuse-specular surface characteristics

The finite-element method has been applied to solve a combined radiative-conductive heat transfer problem for a large space telescope similar to those used in orbiting satellites. The derivation of the underlying matrices and associated solution algorithm for a 2-D triangular element is presented in detail. The resulting expressions for this triangular element typify such an analysis, which yields constitutive matrices when the heat equation is cast in the matrix form. The relevant matrices include those pertaining to thermal conductance, internal heat generation, radiative exchanges, and all possible external thermal loadings. Emphasis is placed on the treatment of non-linear radiative interchange between surfaces in an enclosure having mixed diffuse-specular surface characteristics. Essential differences in governing equations describing these distinctive surface characteristics are identified. Concluding remarks are drawn from an example simulating a Cassegrainian space telescope.

Lee, H.-P.↗
NASA NTRS1975

A new approach to radiative transfer theory using Jones's vectors. I Fundamentals

Radiative transfer of partially polarized radiation in an anisotropically scattering, inhomogeneous atmosphere containing an arbitrary polydispersion of particles is described using Jones's (1941) amplitude vectors and matrices. This approach exploits the close analogy between the quantum-mechanical states of spin 1/2 systems and the polarization states of electromagnetic radiation described by Jones's vector. The complete equivalence between the transport equation for Jones's vectors and the classical radiative-transfer equation for Stokes's intensity vectors is demonstrated in two independent ways after deriving the transport equations for the polarization coherency matrices and for the quaternions corresponding to the Jones's vectors. A compact-operator formulation of the theory is provided and used to derive the necessary equations for both a local and a global description of the transport of Jones's vectors. The integro-differential equations for the amplitude reflection and transmission matrices are derived and related to the usual corresponding equations.

Fymat, A. L.↗
NASA NTRS1977

Modeling error analysis of stationary linear discrete-time filters

The performance of Kalman-type, linear, discrete-time filters in the presence of modeling errors is considered. The discussion is limited to stationary performance, and bounds are obtained for the performance index, the mean-squared error of estimates for suboptimal and optimal (Kalman) filters. The computation of these bounds requires information on only the model matrices and the range of errors for these matrices. Consequently, a design can easily compare the performance of a suboptimal filter with that of the optimal filter, when only the range of errors in the elements of the model matrices is available.

Patel, R.↗
NASA NTRS1976

On a finite dynamic element method for free vibration analysis of structures

This paper explores the concept of finite dynamic elements involving higher order dynamic correction terms in the associated stiffness and mass matrices. Such matrices are then developed for a rectangular prestressed membrane element. Next, efficient analysis techniques for the eigenproblem solution of the resulting quadratic matrix equations are described in detail. These are followed by suitable numerical examples which indicate that employment of such dynamic elements in conjunction with an efficient quadratic matric solution technique will result in a most significant economy in the free vibration analysis of structures.

Gupta, K. K.↗