Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Lead”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Non-linear evolution in QCD at high-energy beyond leading order

The standard formulation of the high-energy evolution in perturbative QCD, based on the Balitsky-Kovchegov equation, is known to suffer from severe instabilities associated with radiative corrections enhanced by double transverse logarithms, which occur in all orders starting with the next-to-leading one. Over the last years, several methods have been devised to resum such corrections by enforcing the time-ordering of the successive gluon emissions. We observe that the instability problem is not fully cured by these methods: various prescriptions for performing the resummation lead to very different physical results and thus lack of predictive power. We argue that this problem can be avoided by using the rapidity of the dense target (which corresponds to Bjorken x) instead of that of the dilute projectile as an evolution time. This automatically ensures the proper time-ordering and also allows for a direct physical interpretation of the results. We explicitly perform this change of variables at NLO. We observe the emergence of a new class of double logarithmic corrections, potentially leading to instabilities, which are however less severe, since disfavoured by the typical BK evolution for “dilute-dense” scattering. We propose several prescriptions for resumming these new double-logarithms to all orders and find only little scheme dependence: different prescriptions lead to results which are consistent to each other to the accuracy of interest. We restore full NLO accuracy by completing one of the resummed equations (non-local in rapidity) with the remaining NLO corrections.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Leading nonlinear tidal effects and scattering amplitudes

We present the two-body Hamiltonian and associated eikonal phase, to leading post-Minkowskian order, for infinitely many tidal deformations described by operators with arbitrary powers of the curvature tensor. Scattering amplitudes in momentum and position space provide systematic complementary approaches. For the tidal operators quadratic in curvature, which describe the linear response to an external gravitational field, we work out the leading post-Minkowskian contributions using a basis of operators with arbitrary numbers of derivatives which are in one-to-one correspondence with the worldline multipole operators. Explicit examples are used to show that the same techniques apply to both bodies interacting tidally with a spinning particle, for which we find the leading contributions from quadratic in curvature tidal operators with an arbitrary number of derivatives, and to effective field theory extensions of general relativity. We also note that the leading post-Minkowskian order contributions from higher-dimension operators manifest double-copy relations. Finally, we comment on the structure of higher-order corrections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

First saturation correction in high energy proton-nucleus collisions. Part I. Time evolution of classical Yang-Mills fields beyond leading order

In high energy proton-nucleus collisions, the single- and double-inclusive soft gluon productions at the leading order have been calculated and phenomenologically studied in various approaches for many years. These studies do not take into account the saturation and multiple rescatterings in the field of the proton. The first saturation correction to these leading order results (the terms that are enhanced by the combination \( {\alpha}_s^2{\mu}^2 \) , where μ 2 is the proton’s color charge squared per unit transverse area) has not been completely derived despite recent attempts using a diagrammatic approach. This paper is the first in a series of papers towards analytically completing the first saturation correction to physical observables in high energy proton-nucleus collisions. Our approach is to analytically solve the classical Yang-Mills equations in the dilute-dense regime using the Color Glass Condensate effective theory and compute physical observables constructed from classical gluon fields. In the current paper, the Yang-Mills equations are solved perturbatively in the field of the dilute object (the proton). Next-to-leading order and next-to-next-to-leading order analytic solutions are explicitly constructed. A systematic way to obtain all higher order analytic solutions is outlined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2011

Depletion of cellular poly (A) binding protein prevents protein synthesis and leads to apoptosis in HeLa cells

Highlights: {yields} Depletion of cellular PABP level arrests mRNA translation in HeLa cells. {yields} PABP knock down leads to apoptotic cell death. {yields} PABP depletion does not affect transcription. {yields} PABP depletion does not lead to nuclear accumulation of mRNA. -- Abstract: The cytoplasmic poly (A) binding protein (PABP) is important in mRNA translation and stability. In yeast, depletion of PABP leads to translation arrest. Similarly, the PABP gene in Drosophila is important for proper development. It is however uncertain, whether mammalian PABP is essential for mRNA translation. Here we showed the effect of PABP depletion on mRNA metabolism in HeLa cells by using a small interfering RNA. Our results suggest that depletion of PABP prevents protein synthesis and consequently leads to cell death through apoptosis. Interestingly, no detectable effect of PABP depletion on transcription, transport and stability of mRNA was observed.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Structural study of the effects of mutations in proteins to identify the molecular basis of the loss of local structural fluidity leading to the onset of autoimmune diseases

Protein-Protein Interactions (PPIs) are crucial in most of the biological processes and PPI dysfunctions are known to be associated with the onsets of various diseases. One of such diseases is the auto-immune disease. Auto-immune diseases are one among the less studied group of diseases with very high mortality rates. Thus, we tried to correlate the appearances of mutations with their probable biochemical basis of the molecular mechanisms leading to the onset of the disease phenotypes. We compared the effects of the Single Amino Acid Variants (SAVs) in the wild type and mutated proteins to identify any structural deformities that might lead to altered PPIs leading ultimately to disease onset. For this we used Relative Solvent Accessibility (RSA) as a spatial parameter to compare the structural perturbation in mutated and wild type proteins. We observed that the mutations were capable to increase intra-chain PPIs whereas inter-chain PPIs would remain mostly unaltered. This might lead to more intra-molecular friction causing a deleterious alteration of protein's normal function. A Lyapunov exponent analysis, using the altered RSA values due to polymorphic and disease causing mutations, revealed polymorphic mutations have a positive mean value for the Lyapunov exponent while disease causing mutations have a negative mean value. Thus, local spatial stochasticity has been lost due to disease causing mutations, indicating a loss of structural fluidity. The amino acid conversion plot also showed a clear tendency of altered surface patch residue conversion propensity than polymorphic conversions. So far, this is the first report that compares the effects of different kinds of mutations (disease and non-disease causing polymorphic mutations) in the onset of autoimmune diseases. - Highlights: • Protein-Protein Interaction. • Changes in Relative Solvent Accessibility (RSA). • Amino acid conversion matrix. • Polymorphic mutations. • Disease causing mutations.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

High expression of A-type lamin in the leading front is required for Drosophila thorax closure

Highlights: • Lamin C expression is high at the leading front of the closing tissue in pupal notum. • Lamin C is required for the coordinated movement of the leading front. • The closure defect by Lamin C knockdown correlates with insufficient F-actin formation. Tissue closure involves the coordinated unidirectional movement of a group of cells without loss of cell–cell contact. However, the molecular mechanisms controlling the tissue closure are not fully understood. Here, we demonstrate that Lamin C, the sole A-type lamin in Drosophila, contributes to the process of thorax closure in pupa. High expression of Lamin C was observed at the leading front of the migrating wing imaginal discs. Live imaging analysis revealed that knockdown of Lamin C in the thorax region affected the coordinated movement of the leading front, resulting in incomplete tissue fusion required for formation of the adult thorax. The closure defect due to knockdown of Lamin C correlated with insufficient accumulation of F-actin at the front. Our study indicates a link between A-type lamin and the cell migration behavior during tissue closure.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Time trends and exposure determinants of lead and cadmium in the adult population of northern Sweden 1990–2014

Introduction: This study follows cadmium and lead concentrations in blood in the adult population in northern Sweden over 24 years. Material and methods: Concentrations of lead and cadmium were measured in single whole blood samples (B-Pb and B-Cd) from 619 men and 926 women participating in the Northern Sweden WHO MONICA Study on one occasion 1990–2014. Associations with smoking and dietary factors were investigated. Consumption of moose meat was asked for in 2014. Results: In the adult population in northern Sweden, the median B-Pb in 2014 was 11.0 µg/L in young (25–35 years) men and 9.69 µg/L in young women. In an older age-group (50–60 years), the median B-Pb was 15.1 µg/L in men and 13.1 µg/L in women. B-Pb decreased from 1990 to 2009, after which time no further decrease was observed. B-Pb was higher in smokers than in non-smokers. In never-smokers, positive associations were found between B-Pb and consumption of wine and brewed coffee (women only) in 2004–2014. Higher B-Pb with consumption of moose meat was demonstrated in men, but not in women. B-Cd was essentially stable over the whole period, but an increase in B-Cd, of 3% per year, was detected in never-smoking women between 2009 and 2014. In 2014, median B-Cd in never-smokers in the four groups was; 0.11 µg/L in younger men, 0.15 µg/L in younger women, 0.14 µg/L in older men, and 0.21 µg/L in older women. B-Cd was higher in smokers than in non-smokers. The only positive association between B-Cd and food items in 2004–2014 was with consumption of brewed coffee (men only). Conclusions: The lack of a decrease in B-Cd from 1990 to 2014 and the absence of a further decrease in B-Pb after 2009 are unsatisfactory considering the health risks these metals pose in the general population at current concentrations. - Highlights: • Lead concentrations in blood have not decreased further after 2009 in northern Sweden. • Cadmium concentrations in blood were essentially unchanged over time in northern Sweden 1990–2014. • More knowledge on current sources of human exposure to lead and cadmium is needed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Sex-specific effects of developmental lead exposure on the immune-neuroendocrine network

The environmental toxicant lead (Pb) has long been known to induce neurological deficits. The 1st century Greek physician Pedanius Dioscorides noted that “lead makes the mind give way”. Current studies are suggesting the effects of Pb on behaviors may involve the immune system and conversely some immunomodulatory changes may be due to Pb effects in the central nervous system. Although Pb-induced disorders do not appear to discriminate among females and males, this report discusses the differences observed in human and animal studies regarding differential gender effects on gene expression after Pb exposure. The overall ill health outcomes are apparent with variant levels of Pb exposure and exposures at different times in development. However, the consensus is that doses leading to blood lead levels > 5 μg/dl and prenatal exposures are most pathogenic. Although the general detriments induced by Pb may be similar in females and males, there are sex specific outcomes on health and behavior. It is suggested that Pb induces more oxidative stress in females and more upregulation of genes responding to oxidative stress, while males have more proteolytic destruction; but in both cases, there is generation of altered/denatured self-constituents causing inflammation and loss of homeostasis of neuronal and immune functions. The higher estrogen levels of females are indicated as the reason for more Pb-induced reactive oxygen species in females. This review describes some of the different genes involved in female and male responses to Pb exposure and involved pathways.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

A vorticity-based criterion to characterise leading edge dynamic stall onset

We propose a more conservative, physically-intuitive criterion, namely, the boundary enstrophy flux ( BEF), to characterise leading-edge-type dynamic stall onset in incompressible flows. Our results are based on wall-resolved large-eddy simulations of pitching aerofoils, with fine spatial and temporal resolution around stall onset. We observe that |BEF| reaches a maximum within the stall onset regime identified. By decomposing the contribution to BEF from the flow field, we find that the dominant contribution arises from the laminar leading edge region, due to the combined effect of large clockwise vorticity and favourable pressure gradient. A relatively small contribution originates from the transitional/turbulent laminar separation bubble (LSB) region, due to LSB-induced counter-clockwise vorticity and adverse pressure gradient. This results in BEF being nearly independent of the integration length as long as the region very close to the leading edge is included. This characteristic of BEF yields a major advantage in that the effect of partial or complete inclusion of the noisy LSB region can be filtered out, without changing the BEF peak location in time significantly. Next, we analytically relate BEF to the net wall shear and show that its critical value (=max(|BEF|) ) corresponds to the instant of maximum net shear prevailing at the wall. Finally, we have also compared BEF with the leading edge suction parameter ( LESP) and find that the former reaches its maximum value between 0.3° and 0.8° of rotation earlier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Ion Beam Induced Artifacts in Lead-Based Chalcogenides

Abstract Metal chalcogenides have attracted great attention because of their broad applications. It has been well acknowledged that microstructure can alter the intrinsic properties and performance of metal chalcogenides. The structure–property–performance relationships can be investigated at atomic scale with scanning transmission and transmission electron microscopy (STEM and TEM). Nevertheless, careful specimen preparation is paramount for accurate analyses and interpretations. In this work, we compare the effects of a variety of well-established TEM specimen preparation methods on the observed microstructure of an ingot stoichiometric lead telluride (PbTe). Most importantly, from aberration corrected STEM and first principles calculations, we discovered that argon (Ar) ion milling can lead to surface irradiation damage in the form of Pb vacancy clusters and self-interstitial atom (SIA) clusters. The SIA clusters appear as orthogonal nanoscale features when characterized along the <001> crystal orientation of the rock salt structured PbTe. This obfuscates the interpretation of the intrinsic microstructure of metal chalcogenides, especially lead chalcogenides. We demonstrate that with sufficiently low energy (300 eV) Ar ion cleaning or appropriate high-temperature annealing, the surface damage layer can be properly cleaned and the orthogonal nanoscale features are significantly reduced. This reveals the materials’ intrinsic structure and can be used as the standard protocol for future TEM specimen preparation of lead-based chalcogenide materials.

Materials Science↗
DOE OSTI2017

Evolution of Iodoplumbate Complexes in Methylammonium Lead Iodide Perovskite Precursor Solutions

Here in this study we investigate the local structure present in single-step precursor solutions of methylammonium lead iodide (MAPbI 3 ) perovskite as a function of organic and inorganic precursor ratio, as well as with hydriodic acid (HI), using X-ray absorption spectroscopy. An excess of organic precursor as well as the use of HI as a processing additive has been shown to lead to the formation of smooth, continuous, pinhole free MAPbI 3 films, whereas films produced from precursor solutions containing molar equivalents of methylammonium iodide (MAI) and PbI 2 lead to the formation of a discontinuous, needlelike morphology. We now show that as the amount of excess MAI in the precursor solution is increased, the iodide coordination of iodoplumbate complexes present in solution increases. The use of HI results in a similar increase in iodide coordination. We therefore offer insight into how solution chemistry can be used to control MAPbI 3 thin film morphology by revealing a strong correlation between the lead coordination chemistry in precursor solutions and the surface coverage and morphology of the resulting MAPbI 3 film.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Bismuth in Lead–Tin Alloy Perovskites: Effect on Material Properties and Photovoltaic Device Performance

Metal halide perovskites (MHPs) have a strong potential for optoelectronic applications, especially photovoltaics. A significant advantage offered by MHPs is their bandgap tunability via chemical substitution and alloying, with lead–tin alloys producing the narrowest reported bandgaps of ~1.2 eV. Efforts to further narrow the bandgap of MHPs by alloying in other elements, such as bismuth, have largely been unsuccessful due to the introduction of defective electronic states, which severely diminish electronic quality. Here, in this study, we examine the effects of bismuth on a lead–tin alloyed MHP, motivated by the narrow bandgap of alloyed lead–tin MHPs. We find that the defect screening observed in lead–tin MHPs is not sufficient to screen the defect level introduced by bismuth, as evidenced by quenched photoluminescence, decreased mobility, and severely reduced performance in a photovoltaic device. Density functional theory calculations suggest that midgap states are introduced by bismuth addition over a range of chemical and compositional conditions. We further observe through wavelength-dependent photoconductivity that free carriers are generated out to ~0.9 eV in bismuth-containing samples, which could be of potential interest for NIR photodetection.

14 SOLAR ENERGY↗
DOE OSTI2021

Design of High-Performance Lead-Free Quaternary Antiperovskites for Photovoltaics via Ion Type Inversion and Anion Ordering

The emergence of halide double perovskites significantly increases the compositional space for lead-free and air-stable photovoltaic absorbers compared to halide perovskites. Nevertheless, most halide double perovskites exhibit oversized band gaps (>1.9 eV) or dipole-forbidden optical transition, which are unfavorable for efficient single-junction solar cell applications. The current device performance of halide double perovskite is still inferior to that of lead-based halide perovskites, such as CH 3 NH 3 PbI 3 (MAPbI 3 ). Here, by ion type inversion and anion ordering on perovskite lattice sites, two new classes of pnictogen-based quaternary antiperovskites with the formula of X 6 B 2 AA' and X 6 BB'A 2 are designed. Phase stability and tunable band gaps in these quaternary antiperovskites are demonstrated based on first-principles calculations. Further photovoltaic-functionality-directed screening of these materials leads to the discovery of 5 stable compounds (Ca 6 N 2 AsSb, Ca 6 N 2 PSb, Sr 6 N 2 AsSb, Sr 6 N 2 PSb, and Ca 6 NPSb 2 ) with suitable direct band gaps, small carrier effective masses and low exciton binding energies, and dipole-allowed strong optical absorption, which are favorable properties for a photovoltaic absorber material. The calculated theoretical maximum solar cell efficiencies based on these five compounds are all larger than 29%, comparable to or even higher than that of the MAPbI 3 based solar cell. Finally, our work reveals the huge potential of quaternary antiperovskites in the optoelectronic field and provides a new strategy to design lead-free and air-stable perovskite-based photovoltaic absorber materials.

three-dimensional electronic transport↗
DOE OSTI2024

Bromine Incorporation Affects Phase Transformations and Thermal Stability of Lead Halide Perovskites

Mixed-cation and mixed-halide lead halide perovskites show great potential for their application in photovoltaics. Many of the high-performance compositions are made of cesium, formamidinium, lead, iodine, and bromine. However, incorporating bromine in iodine-rich compositions and its effects on the thermal stability of the perovskite structure has not been thoroughly studied. In this work, we study how replacing iodine with bromine in the state-of-the-art Cs 0.17 FA 0.83 PbI 3 perovskite composition leads to different dynamics in the phase transformations as a function of temperature. Through a combination of structural characterization, cathodoluminescence mapping, X-ray photoelectron spectroscopy, and first-principles calculations, we reveal that the incorporation of bromine reduces the thermodynamic phase stability of the films and shifts the products of phase transformations. Our results suggest that bromine-driven vacancy formation during high temperature exposure leads to irreversible transformations into PbI 2 , whereas materials with only iodine go through transformations into hexagonal polytypes, such as the 4H-FAPbI 3 phase. This work sheds light on the structural impacts of adding bromine on thermodynamic phase stability and provides new insights into the importance of understanding the complexity of phase transformations and secondary phases in mixed-cation and mixed-halide systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Causes of Degradation of Organ Pipes with Very Low Lead Content

This study investigates the causes of degradation in organ pipes with low lead content. Using light This study investigates the causes of degradation in organ pipes with low lead content. Using light optical microscopy, SEM/EDS, and TEM/EDS, intermetallic Cu6Sn5, FeSn2, Sn4As3, and Pb particles were observed in the structure of SnPb alloys. Degradation of the low-Pb organ metal, which is primarily caused by the selective corrosion of lead occurring due to the effect of volatile organic compounds (VOCs). Another factor leading to degradation is the structural transformation of tin occurring at low temperatures (tin pest). TEM/EDS allowed the unique observation of α-tin particles found in a β-tin matrix at room temperature. The presence of particles of α‑tin in historical organ pipes has not previously been reported, and it is the first presented observation of all.

alloy SnPb↗
DOE OSTI2021

Recycling lead and transparent conductors from perovskite solar modules

Abstract Perovskite photovoltaics are gaining increasing common ground to partner with or compete with silicon photovoltaics to reduce cost of solar energy. However, a cost-effective waste management for toxic lead (Pb), which might determine the fate of this technology, has not been developed yet. Here, we report an end-of-life material management for perovskite solar modules to recycle toxic lead and valuable transparent conductors to protect the environment and create dramatic economic benefits from recycled materials. Lead is separated from decommissioned modules by weakly acidic cation exchange resin, which could be released as soluble Pb(NO 3 ) 2 followed by precipitation as PbI 2 for reuse, with a recycling efficiency of 99.2%. Thermal delamination disassembles the encapsulated modules with intact transparent conductors and cover glasses. The refabricated devices based on recycled lead iodide and recycled transparent conductors show comparable performance as devices based on fresh raw materials. Cost analysis shows this recycling technology is economically attractive.

14 SOLAR ENERGY↗
DOE OSTI2023

Order-disorder phase transition driven by interlayer sliding in lead iodides

A variety of phase transitions have been found in two-dimensional layered materials, but some of their atomic-scale mechanisms are hard to clearly understand. Here, we report the discovery of a phase transition whose mechanism is identified as interlayer sliding in lead iodides, a layered material widely used to synthesize lead halide perovskites. The low-temperature crystal structure of lead iodides is found not 2H polytype as known before, but non-centrosymmetric 4H polytype. This undergoes the order-disorder phase transition characterized by the abrupt spectral broadening of valence bands, taken by angle-resolved photoemission, at the critical temperature of 120 K. It is accompanied by drastic changes in simultaneously taken photocurrent and photoluminescence. The transmission electron microscopy is used to reveal that lead iodide layers stacked in the form of 4H polytype at low temperatures irregularly slide over each other above 120 K, which can be explained by the low energy barrier of only 10.6 meV/atom estimated by first principles calculations. Our findings suggest that interlayer sliding is a key mechanism of the phase transitions in layered materials, which can significantly affect optoelectronic and optical characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Strain-induced lead-free morphotropic phase boundary

Enhanced susceptibilities in ferroelectrics often arise near phase boundaries between competing ground states. While chemically-induced phase boundaries have enabled ultrahigh electrical and electromechanical responses in lead-based ferroelectrics, precise chemical tuning in lead-free alternatives, such as (K,Na)NbO 3 thin films, remains challenging due to the high volatility of alkali metals. Here, we demonstrate strain-induced morphotropic phase boundary-like polymorphic nanodomain structures in chemically simple, lead-free, epitaxial NaNbO 3 thin films. Combining ab initio simulations, thin-film epitaxy, scanning probe microscopy, synchrotron X-ray diffraction, and electron ptychography, we reveal a labyrinthine structure comprising coexisting monoclinic and bridging triclinic phases near a strain-induced phase boundary. The coexistence of energetically competing phases facilitates field-driven polarization rotation and phase transitions, giving rise to a multi-state polarization switching pathway and large enhancements in dielectric susceptibility and tunability across a broad frequency range. Our results open new possibilities for engineering lead-free thin films with enhanced functionalities for next-generation applications.

Electronic properties and materials↗