Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “L CODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Aerodynamic Analyses and Database Development for Lift-Off/Transition and First Stage Ascent of the Ares I A106 Vehicle

NASA Langley Research Center, in partnership with NASA Marshall Space Flight Center and NASA Ames Research Center, was involved in the aerodynamic analyses, testing, and database development for the Ares I A106 crew launch vehicle in support of the Ares Design and Analysis Cycle. This paper discusses the development of lift-off/transition and ascent databases. The lift-off/transition database was developed using data from tests on a 1.75% scale model of the A106 configuration in the NASA Langley 14x22 Subsonic Wind Tunnel. The power-off ascent database was developed using test data on a 1% A106 scale model from two different facilities, the Boeing Polysonic Wind Tunnel and the NASA Langley Unitary Plan Wind Tunnel. The ascent database was adjusted for differences in wind tunnel and flight Reynolds numbers using USM3D CFD code. The aerodynamic jet interaction effects due to first stage roll control system were modeled using USM3D and OVERFLOW CFD codes.

Pamadi, Bandu N.↗
NASA NTRS2013

Further Development of Rotating Rake Mode Measurement Data Analysis

The Rotating Rake mode measurement system was designed to measure acoustic duct modes generated by a fan stage. After analysis of the measured data, the mode amplitudes and phases were quantified. For low-speed fans within axisymmetric ducts, mode power levels computed from rotating rake measured data would agree with the far-field power levels on a tone by tone basis. However, this agreement required that the sound from the noise sources within the duct propagated outward from the duct exit without reflection at the exit and previous studies suggested conditions could exist where significant reflections could occur. To directly measure the modes propagating in both directions within a duct, a second rake was mounted to the rotating system with an offset in both the axial and the azimuthal directions. The rotating rake data analysis technique was extended to include the data measured by the second rake. The analysis resulted in a set of circumferential mode levels at each of the two rake microphone locations. Radial basis functions were then least-squares fit to this data to obtain the radial mode amplitudes for the modes propagating in both directions within the duct. The fit equations were also modified to allow evanescent mode amplitudes to be computed. This extension of the rotating rake data analysis technique was tested using simulated data, numerical code produced data, and preliminary in-duct measured data.

Dahl, Milo D.↗
NASA NTRS2015

Comparison of Numerically Simulated and Experimentally Measured Performance of a Rotating Detonation Engine

A quasi-two-dimensional, computational fluid dynamic (CFD) simulation of a rotating detonation engine (RDE) is described. The simulation operates in the detonation frame of reference and utilizes a relatively coarse grid such that only the essential primary flow field structure is captured. This construction and other simplifications yield rapidly converging, steady solutions. Viscous effects, and heat transfer effects are modeled using source terms. The effects of potential inlet flow reversals are modeled using boundary conditions. Results from the simulation are compared to measured data from an experimental RDE rig with a converging-diverging nozzle added. The comparison is favorable for the two operating points examined. The utility of the code as a performance optimization tool and a diagnostic tool are discussed.

combustion↗
NASA NTRS2017

Grid Convergence for Three Dimensional Benchmark Turbulent Flows

Grid convergence studies are performed to establish reference solutions for benchmark three dimensional turbulent flows in support of the ongoing turbulence model verification and validation e ort at the Turbulence Modeling Resource website curated by NASA. The bench- mark cases are a subsonic flow around a hemisphere cylinder and a transonic flow around the ONERA M6 wing with a sharp trailing edge. The study applies widely-used computational fluid dynamics codes developed and supported at the NASA Langley Research Center: FUN3D, USM3D, and CFL3D. Reference steady-state solutions are computed for the Reynolds-Averaged Navier-Stokes equations with the Spalart-Allmaras turbulence model on families of consistently-refined grids composed of different types of cells. Coarse-to- ne and code-to-code solution variation is described in detail.

Diskin, Boris↗
NASA NTRS2019

Status of the Post Flight MMOD Inspection Campaign for the SpaceX Cargo Dragon

The SpaceX Cargo Dragon has been flying supply missions for NASA to the International Space Station (ISS) since 2012. At the time of this writing, SpaceX has completed 14 missions to ISS with each returning to Earth via water landing. After each mission, a team from the NASA Johnson Space Center performs an inspection of the exterior surfaces of the Cargo Dragon spacecraft for hypervelocity impact damage features. Data from these inspections are collected into a database that includes impact feature dimensions as well as the location on the vehicle. Additional details on the type and size of particle that produced the damage site are pro-vided when sampling data and definitive spectroscopic analysis results are available. Observation data can be compared with impact estimates from risk assessment codes as a check on the micro-meteoroid and orbital debris (MMOD) environment predictions.

Hyde, James L.↗
NASA NTRSDate not supplied

SpaceX Dragon Spacecraft Post Flight MMOD Inspection Campaign

The SpaceX Dragon spacecraft performed 20 resupply flights to the International Space Station (ISS) between 2012 and 2020. After each mission, a team led by the NASA Johnson Space Center Hypervelocity Impact Technology (HVIT) Group inspected each Dragon vehicle exterior for hypervelocity impact damage. A general description of the inspected vehicle areas is provided as well as mission details such as exposure duration and launch dates. This paper documents the general inspection procedure for collection of data and the post inspection data analysis process. It also provides details of the observation data collected in addition to the spectroscopic analysis results of intact samples collected to discern the source of the impacting particle. A comparison between observed impacts and the expected number of damage features calculated by Bumper 3 with the latest micrometeoroid and orbital debris (MMOD) environments are also presented. Statistics on the >300 impact features documented in the database will provide insight into the depth to diameter ratios and other relationships. The quality of the comparison between the observations and code predictions are dependent on several factors. The paper provides details of each of these variables.

orbital debris↗
NASA NTRS1977

A finite element algorithm for sound propagation in axisymmetric ducts containing compressible mean flow

An accurate mathematical model for sound propagation in axisymmetric aircraft engine ducts with compressible mean flow is reported. The model is based on the usual perturbation of the basic fluid mechanics equations for small motions. Mean flow parameters are derived in the absence of fluctuating quantities and are then substituted into the equations for the acoustic quantities which were linearized by eliminating higher order terms. Mean swirl is assumed to be zero from the restriction of axisymmetry. A linear rectangular serendipity element is formulated from these equations using a Galerkin procedure and assembled in a special purpose computer program in which the matrix map for a rectangular mesh was specifically coded. Representations of the fluctuating quantities, mean quantities and coordinate transformations are isoparametric. The global matrix is solved by foreward and back substitution following an L-U decomposition with pivoting restricted internally to the blocks. Results from the model were compared with results from several alternative analyses and yielded satisfactory agreement.

Abrahamson, A. L.↗
NASA NTRS1989

Simulation of electrostatic ion instabilities in the presence of parallel currents and transverse electric fields

A spatially two-dimensional electrostatic PIC simulation code was used to study the stability of a plasma equilibrium characterized by a localized transverse dc electric field and a field-aligned drift for L is much less than Lx, where Lx is the simulation length in the x direction and L is the scale length associated with the dc electric field. It is found that the dc electric field and the field-aligned current can together play a synergistic role to enable the excitation of electrostatic waves even when the threshold values of the field aligned drift and the E x B drift are individually subcritical. The simulation results show that the growing ion waves are associated with small vortices in the linear stage, which evolve to the nonlinear stage dominated by larger vortices with lower frequencies.

Nishikawa, K.-I.↗
NASA NTRS1994

Radial diffusion models of energetic electrons and Jupiter's synchrotron radiation. 2: Time variability

We used a radial diffusion code for energetic electrons in Jupiter's magnetosphere to investigate variations in Jupiter's radio emission due to changes in the electron phase space density at L shells between 6 and 50, and due to changes in the radial diffusion parameters. We suggest that the observed variations in Jupiter's radio emission are likely caused by changes in the electron phase space density at some boundary L(sub 1) is greater than 6, if the primary mode of transport of energetic electrons is radial diffusion driven by fluctuating electric and/or magnetic fields induced by upper atmospheric turbulence. We noticed an excellent empirical correlation, both in phase and relative amplitude, between changes in the solar wind ram pressure and Jupiter's synchrotron radiation if the electron phase space density at the boundary L(sub 1) (L(sub 1) is approximately equal to 20-50) varies linearly with the square root of the solar wind ram pressure, f is approximately (N(sub s)nu(exp 2 sub s))(exp 1/2). The calculations were carried out with a diffusion coefficient D(sub LL) = D(sub n)L(exp n) with n = 3. The diffusion coefficient which best fit the observed variations in Jupiter's synchrotron radiation D(sub 3) = 1.3 +/- 0.2 x 10(exp -9)/s is approximately 0.041/yr, which corresponds to a lagtime of approximately 2 years. We further show that the observed short term (days-weeks) variations in Jupiter's radio emission cannot be explained adequately when radial diffusion is taken into account.

De Pater, Imke↗
NASA NTRS1991

Catalytic RNA and synthesis of the peptide bond

We are studying whether the L-19 IVS ribozyme from Tetrahymena thermophila can catalyze the formation of the peptide bond when it is supplied with synthetic aminoacyl oligonucleotides. If this reaction works, it could give us some insight into the mechanism of peptide bond formation and the origin of coded protein synthesis. Two short oligoribonucleotides, CCCCC and a protected form of CCCCU were prepared; the former was made by the controlled hydrolysis of Poly(C), and the later by multistep chemical synthesis from the protected monomers. The homopentamer was then aminocylated using C-14 labelled Boc-protected glycine imidazolide. This aminoacylated oligo-nucleotide has now been shown to enter the active site of the L-19 IVS, and aminoacyl transfer, and peptide bond formation reactions are being sought. Our synthesis of CCCCU made us aware of the inadequacy of many of the 2'- hydroxyl protecting groups that are in use today and we therefore designed a new 2'- protecting group that is presently being tested.

Usher, D. A.↗
NASA NTRS1983

Dissociative recombination of O2(+), NO(+) and N2(+)

A new L(2) approach for the calculation of the threshold molecular capture width needed for the determination of DR cross sections was developed. The widths are calculated with Fermi's golden rule by substituting Rydberg orbitals for the free electron continuum coulomb orbital. It is shown that the calculated width converges exponentially as the effective principal quantum number of the Rydberg orbital increases. The threshold capture width is then easily obtained. Since atmospheric recombination involves very low energy electrons, the threshold capture widths are essential to the calculation of DR cross sections for the atmospheric species studied here. The approach described makes use of bound state computer codes already in use. A program that collects width matrix elements over CI wavefunctions for the initial and final states is described.

Guberman, S. L.↗
NASA NTRS2015

Verification and Validation of the k-kL Turbulence Model in FUN3D and CFL3D Codes

The implementation of the k-kL turbulence model using multiple computational uid dy- namics (CFD) codes is reported herein. The k-kL model is a two-equation turbulence model based on Abdol-Hamid's closure and Menter's modi cation to Rotta's two-equation model. Rotta shows that a reliable transport equation can be formed from the turbulent length scale L, and the turbulent kinetic energy k. Rotta's equation is well suited for term-by-term mod- eling and displays useful features compared to other two-equation models. An important di erence is that this formulation leads to the inclusion of higher-order velocity derivatives in the source terms of the scale equations. This can enhance the ability of the Reynolds- averaged Navier-Stokes (RANS) solvers to simulate unsteady ows. The present report documents the formulation of the model as implemented in the CFD codes Fun3D and CFL3D. Methodology, veri cation and validation examples are shown. Attached and sepa- rated ow cases are documented and compared with experimental data. The results show generally very good comparisons with canonical and experimental data, as well as matching results code-to-code. The results from this formulation are similar or better than results using the SST turbulence model.

Abdol-Hamid, Khaled S.↗
NASA NTRS1972

Variable-length codes and the Fano metric.

It is shown that the metric proposed originally by Fano for sequential decoding is precisely the required statistic for minimum-error-probability decoding of variable-length codes. The analysis shows further that the 'natural' choice of bias in the metric is the code rate and gives insight into why the Fano metric has proved to be the best practical choice in sequential decoding. The recently devised Jelinek-Zigangirov 'stack algorithm' is shown to be a natural consequence of this interpretation of the Fano metric. Finally, it is shown that the elimination of the bias in the 'truncated' portion of the code tree gives a slight reduction in average computation at the sacrifice of increased error probability.

Massey, J. L.↗
NASA NTRS1975

The NATA code: Theory and analysis, volume 1

A computer program for calculating quasi-one-dimensional gas flow in axisymmetric and two-dimensional nozzles and rectangular channels is presented. Flow is assumed to start from a state of thermochemical equilibrium at a high temperature in an upstream reservoir. The program provides solutions based on frozen chemistry, chemical equilibrium, and nonequilibrium flow with finite reaction rates. Electronic nonequilibrium effects can be included using a two-temperature model. An approximate laminar boundary layer calculation is given for the shear and heat flux on the nozzle wall. Boundary layer displacement effects on the inviscid flow are considered also. Chemical equilibrium and transport property calculations are provided by subroutines. The code contains precoded thermochemical, chemical kinetic, and transport cross section data for high-temperature air, CO2-N2-Ar mixtures, helium, and argon. It provides calculations of the stagnation conditions on axisymmetric or two-dimensional models, and of the conditions on the flat surface of a blunt wedge. The primary purpose of the code is to describe the flow conditions and test conditions in electric arc heated wind tunnels.

Bade, W. L.↗
NASA NTRS1976

Tables and charts of equilibrium thermodynamic properties of ammonia for temperatures from 500 to 50,000 K.

Equilibrium thermodynamic properties for pure ammonia were generated for a range of temperature from 500 to 50,000 K and pressure from 0.01 to 40 MN/sq m and are presented in tabulated and graphical form. Properties include pressure, temperature, density, enthalpy, speed of sound, entropy, molecular-weight ratio, specific heat at constant pressure, specific heat at constant volume, isentropic exponent, and species mole fractions. These properties were calculated by the method which is based on minimization of the Gibbs free energy. The data presented herein are for an 18-species ammonia model. Heats of formation and spectroscopic constants used as input data are presented. Comparison of several thermodynamic properties calculated with the present program and a second computer code is performed for a range of pressure and for temperatures up to 30,000 K.

Simmonds, A. L.↗