Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “JET MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Modeling and computation of turbulent free-surface jets

A 2D numerical model for a turbulent surface jet issuing into a finite-depth channel is presented. The model uses an unstructured, finite element procedure. The calculations confirm the experimental observation that scale similarity may be apparent in the mean velocity profile even in the presence of a large encroaching recirculation cell.

Miner, E. W.↗

Experimental platforms for investigating feature-driven jets for HED mix model validation

High-energy-density (HED) systems, such as inertial confinement fusion (ICF), are susceptible to hydrodynamic instabilities that can significantly affect both experimental results and modeling predictions. Isolated features, such as fill tubes or divots in the capsule, can cause material to jet as a result of the compressive shock exciting the Richtmyer–Meshkov instability, and serve as one of the primary degradation mechanisms in ICF yield. Simulations of feature-driven jets and how they mix require extensive experimental validation, particularly for understanding to what degree the initial size and shape of a feature influence jet dynamics, and how much instability feeds through downstream layers. A better understanding of feature-driven jetting can improve our mix modeling capabilities and increase hydrodynamic simulation accuracy. This manuscript describes a series of experimental platforms fielded by Los Alamos National Laboratory as a part of the Mshock Omega 60 and ModCons Omega EP campaigns to explore feature-driven jetting. These platforms are designed to benchmark jet evolution and growth as a function of initial feature size and shape, investigate jet-layer interactions leading to instability feedthrough, and will be used to characterize jet-jet interactions resulting from clusters of features. In conclusion, preliminary results for both platforms are shown. The ModCons experiments are on-going, and a discussion of future work directions is included.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An analytical model for the vorticity associated with a transverse jet

A two dimensional model is developed for a turbulent jet injected normally into a uniform crossflow, in which particular emphasis is placed on the contra-rotating vortex pair associated with the jet. By approximating the forces acting on each of the viscous vortices, equations governing the vortex spacing and downstream jet velocity are evolved. No empirical information is incorporated into this model. A description of the variation in total vortex strength is utilized in which vorticity generated by the jet's impulse dominates the farfield. Numerical solution of the governing equations yields results for the vortex trajectory, half spacing, varying circulation, and viscous core size that correlate quite well with experimental data and asymptotic relations. Based on these findings, we conclude that vortex separation and other important characteristics of the jet cross-section are two dimensional and viscous in nature. Hence it becomes possible to predict, on purely theoretical grounds, the behavior of the vortex pair and of the jet itself.

Karagozian, A. R.↗

Longitudinal Aerodynamic Characteristics and Effect of Rocket Jet on Drag of Models of the Hermes A-3A and A-3B Missiles in Free Flight at Mach Numbers From 0.6 to 2.0

A free-flight investigation over a Mach number range from 0.6 to 2.0 has been conducted to determine the longitudinal aerodynamic characteristics and effect of rocket jet on zero-lift drag of 1/5-scale models of two ballistic-type missiles, the Hermes A-3A and A-3B. Models of both types of missiles exhibited very nearly linear normal forces and pitching moments over the angle-of-attack range of 8 deg to -4 deg and Mach number range tested. The centers of pressure for both missiles were not appreciably affected by Mach number over the subsonic range; however, between a Mach number of 1.02 and 1.50 the center of pressure for the A-3A model moved forward 0.34 caliber with increasing Mach number. At a trim angle-of-attack of approximately 30 deg, the A-3A model indicated a total drag coefficient 30% higher than the power-off zero-lift drag over the subsonic Mach number range and 10% higher over the supersonic range. Under the conditions of the present test, and excluding the effect of the jet on base drag, there was no indicated effect of the propulsive jet on the total drag of the A-3A model. The propulsive jet operating at a jet pressure ratio p(sub j)/p(sub o) of 0.8 caused approximately 100% increase in base drag over the Mach number range M = 0.6 to 1.0. This increase in base drag amounts to 15% of the total drag. An underexpanded jet operating at jet pressure ratios corresponding approximately to those of the full-scale missile caused a 22% reduction in base drag at M = 1.55 (p(sub j)/p(sub o) = 1.76) but indicated no change at M = 1.30 (p(sub j)/p(sub o) = 1.43). At M = 1.1 and p(sub j)/p(sub o) = 1.55, the jet caused a 50% increase in base drag.

Jackson, H. Herbert↗

Inverse Compton X-ray emission from the superluminal quasar 3C 345

In quasars with strong radio cores, the inverse-Compton process is believed to be the dominant source X-ray emission. For objects with parsec-scale radio jets, simple models have predicted that components in the jet emerging from the quasar nucleus generate the observed X-ray emission. We have tested this hypothesis in detail for the quasar 3C 345 using a ROSAT X-ray observation in 1990 July, together with quasi-simultaneous very long base interferometry (VLBI) imaging of the parsec-scale jet at five frequencies. The ROSAT spectrum is well fitted by a power law with index alpha = -0.96 +/- -0.13, consistent with models in which the X-ray emission results from inverse-Compton scattering of radio radiation from high-energy electrons in compact components. We show that the radio properties of brightest `knot' in the jet (`C5') can be fitted with a homogeneous sphere model whose parameters require bulk relativistic motion of the emitting material; otherwise the predicted model whose parameters require bulk relativistic motion of the emitting material; otherwise the predicted inverse-Compton X-ray emission exceeds the observed flux. If C5 is the origin of the X-ray emission, then it has a Doppler factor delta = 7.5((sup +3 sub -2)). If the nucleus or other components contribute to the X-ray emission, then this becomes a firm lower limit to delta. The inhomogeneous jet model of Koenigl is a good fit both to the barely resolved (less than 1 pc) flat-spectrum nucleus in the radio, and also to the ROSAT X-ray spectrum. The synchrotron and inverse-Compton emitting fluid moves down a narrow cone (opening angle 2 phi approximately 5 deg) nucleus relativistically, with delta approximately 4.6. Doppler factors for the nucleus and C5, derived from our ROSAT observation, provide evidence for bulk relativistic motion in the jet. By combining these constraints with well-known superluminal motion of jet components, we can deduce geometry. For epoch 1990.5 we infer the Lorentz factor gamma = 7.5 ((sup +1.0 sub -1.5)) and angle to the line of sight theta = 8((sup +2 deg sub -3 deg)) for H(sub 0) = 100 km/s/Mpc. These values are the most reliable yet derived using this method, because of the near-simultaneity of our X-ray and VLBI observations and the quality of the multifrequency of VLBI images and component radio spectra.

Unwin, S. C.↗

Analytical simulation of the far-field jet noise and the unsteady jet flow-field by a model of periodic shedding of vortex ring from the jet exit

The construction of a theoretical flow field due to shedding of vortex rings, the identification of the controlling parameters, and the determination of whether the theoretical model successfully simulated the unsteady pressure field near jet (and consequently the far field noise) was studied. The basic parameters contained in the analytic solutions were the epoch at which a vortex ring was shed near the jet exit and the eddy viscosity coefficient. These parameters were identified from the experimental data for the real-time pressure and from the spread of the mixing layer of the jet. Results of the theoretical analysis show good qualitative agreement with the experimental data.

Liu, C. H.↗

Acoustic characteristics of a high-subsonic jet

Acoustic characteristics of high subsonic model cold jet using imaging technique and measurements of energy flux of flow, calculating energy flux from flowfield measurements

Maestrello, L.↗

K-ε Turbulence Model Parameter Estimates Using an Approximate Self-similar Jet-in-Crossflow Solution

The k-ε turbulence model has been described as perhaps “the most widely used complete turbulence model.” This family of heuristic Reynolds Averaged Navier-Stokes (RANS) turbulence closures is supported by a suite of model parameters that have been estimated by demanding the satisfaction of well-established canonical flows such as homogeneous shear flow, log-law behavior, etc. While this procedure does yield a set of so-called nominal parameters, it is abundantly clear that they do not provide a universally satisfactory turbulence model that is capable of simulating complex flows. Recent work on the Bayesian calibration of the k-ε model using jet-in-crossflow wind tunnel data has yielded parameter estimates that are far more predictive than nominal parameter values. In this paper, we develop a self-similar asymptotic solution for axisymmetric jet-in-crossflow interactions and derive analytical estimates of the parameters that were inferred using Bayesian calibration. The self-similar method utilizes a near field approach to estimate the turbulence model parameters while retaining the classical far-field scaling to model flow field quantities. Our parameter values are seen to be far more predictive than the nominal values, as checked using RANS simulations and experimental measurements. They are also closer to the Bayesian estimates than the nominal parameters. A traditional simplified jet trajectory model is explicitly related to the turbulence model parameters and is shown to yield good agreement with measurement when utilizing the analytical derived turbulence model coefficients. Finally, the close agreement between the turbulence model coefficients obtained via Bayesian calibration and the analytically estimated coefficients derived in this paper is consistent with the contention that the Bayesian calibration approach is firmly rooted in the underlying physical description.

42 ENGINEERING↗

Static and wind tunnel near-field/far field jet noise measurements from model scale single-flow baseline and suppressor nozzles. Volume 2: Forward speed effects

A model scale flight effects test was conducted in the 40 by 80 foot wind tunnel to investigate the effect of aircraft forward speed on single flow jet noise characteristics. The models tested included a 15.24 cm baseline round convergent nozzle, a 20-lobe and annular nozzle with and without lined ejector shroud, and a 57-tube nozzle with a lined ejector shroud. Nozzle operating conditions covered jet velocities from 412 to 640 m/s at a total temperature of 844 K. Wind tunnel speeds were varied from near zero to 91.5 m/s. Measurements were analyzed to (1) determine apparent jet noise source location including effects of ambient velocity; (2) verify a technique for extrapolating near field jet noise measurements into the far field; (3) determine flight effects in the near and far field for baseline and suppressor nozzles; and (4) establish the wind tunnel as a means of accurately defining flight effects for model nozzles and full scale engines.

Jaeck, C. L.↗

Effect of Turbulence Modeling on an Excited Jet

The flow dynamics in a high-speed jet are dominated by unsteady turbulent flow structures in the plume. Jet excitation seeks to control these flow structures through the natural instabilities present in the initial shear layer of the jet. Understanding and optimizing the excitation input, for jet noise reduction or plume mixing enhancement, requires many trials that may be done experimentally or computationally at a significant cost savings. Numerical simulations, which model various parts of the unsteady dynamics to reduce the computational expense of the simulation, must adequately capture the unsteady flow dynamics in the excited jet for the results are to be used. Four CFD methods are considered for use in an excited jet problem, including two turbulence models with an Unsteady Reynolds Averaged Navier-Stokes (URANS) solver, one Large Eddy Simulation (LES) solver, and one URANS/LES hybrid method. Each method is used to simulate a simplified excited jet and the results are evaluated based on the flow data, computation time, and numerical stability. The knowledge gained about the effect of turbulence modeling and CFD methods from these basic simulations will guide and assist future three-dimensional (3-D) simulations that will be used to understand and optimize a realistic excited jet for a particular application.

Brown, Clifford A.↗

Reynolds stress closure in jet flows using wave models

Ways of implementing the turbulence closure scheme based on modeling the large scale coherent structures as instability waves were sought. The computational tools necessary to apply this scheme to jets of arbitrary geometry were developed. The model, developed earlier, was extended to the shock structure of supersonic jets of arbitrary geometry and multiple jets. It was found that though the qualititate features of the unsteady flow field could be predicted there were always difficulties with some of the quantitative features. This led to the new formation of the closure scheme. The schemes for computations tools which were developed are efficient and represent the application of the very powerful mathematical tools to the problems of practical significance.

Morris, P. J.↗

Development of a platform for experimental and computational studies of magnetic and radiative effects on astrophysically relevant jets at OMEGA

Accurate modeling of astrophysical jets is critical for understanding accretion systems and their impact on the interstellar medium. While astronomical observations can validate models, they have limitations. Controlled laboratory experiments offer a complementary approach for qualitative and quantitative demonstration. Laser experiments offer a complementary approach. This article introduces a new platform on the OMEGA laser facility for high-velocity (1500 kms−1), high-aspect-ratio (∼36) jet creation with strong cylindrical symmetry. This platform's capabilities bridge observational gaps, enabling controlled initial conditions and direct measurements of plasma characteristics, crucial for refining astrophysical jet dynamics and improving the models accuracy.

Rigon, G. (ORCID:0000000256664725)↗

Comparison of Turbulent Thermal Diffusivity and Scalar Variance Models

In this study, several variable turbulent Prandtl number formulations are examined for boundary layers, pipe flow, and axisymmetric jets. The model formulations include simple algebraic relations between the thermal diffusivity and turbulent viscosity as well as more complex models that solve transport equations for the thermal variance and its dissipation rate. Results are compared with available data for wall heat transfer and profile measurements of mean temperature, the root-mean-square (RMS) fluctuating temperature, turbulent heat flux and turbulent Prandtl number. For wall-bounded problems, the algebraic models are found to best predict the rise in turbulent Prandtl number near the wall as well as the log-layer temperature profile, while the thermal variance models provide a good representation of the RMS temperature fluctuations. In jet flows, the algebraic models provide no benefit over a constant turbulent Prandtl number approach. Application of the thermal variance models finds that some significantly overpredict the temperature variance in the plume and most underpredict the thermal growth rate of the jet. The models yield very similar fluctuating temperature intensities in jets from straight pipes and smooth contraction nozzles, in contrast to data that indicate the latter should have noticeably higher values. For the particular low subsonic heated jet cases examined, changes in the turbulent Prandtl number had no effect on the centerline velocity decay.

computational fluid dynamics↗

Cometary activity, discrete outgassing areas, and dust-jet formation

Conceptual models for various types of features observed in cometary comae (jets, spirals, halos, fans, etc.), their computer simulation, and the hydrodynamic models for jet formation are critically reviewed, and evidence for anisotropic, strongly collimated flows of ejecta emanating from discrete active regions (vents) on the rotating cometary nuclei is presented. Techniques employed to generate synthetic comet images that simulate the features observed are described, and their relevance to the primary objects of coma-morphology studies is discussed. Modeling of temporal variations in the water emission from discrete active regions suggests that production curves asymmetric with respect to perihelion should be commonplace. Critical comparisons with the activity profiles of Enke's comet and with light curves of disappearing comets and comets that undergo outbursts are presented. Recent developments in the understanding of the processes that cause the nongravitational perturbations of cometary motions are reviewed, and the observed discontinuities are identified with the birth of new sources and/or deactivation of old vents.

Sekanina, Z.↗

Low-Speed Measurements of Static and Oscillatory Lateral Stability Derivatives of a 1/5-scale Model of a Jet-Powered Vertical-Attitude VTOL Research Airplane

An investigation has been made in the Langley free-flight tunnel to determine the low-speed static lateral stability characteristics and the rolling, yawing, and sideslipping dynamic stability derivatives of a 1/5-scale model of a jet-powered vertical-attitude VTOL research airplane. The results of this investigation are presented herein without analysis.

Shanks, Robert E.↗

Scale model testing of the jet noise characteristics of the JT8D refan engine nozzle system

The results are presented of static scale model acoustic tests of the nozzle system for the JT8D-9 baseline engine and candidate nozzle systems for JT8D-109, JT8D-115, and JT8D-117 refan engines. The objective of these tests was to determine the jet noise benefit of the three refan engine cycles relative to the baseline JT8D-9, and to provide acoustic information toward selection of the optimum primary-secondary area match and centerbody contour for the refan engine cycles. One of the nozzle configurations was tested with and without simulated turbine exit swirl to determine what effect, if any, swirl has no jet noise. The JT8D-109 cycle was found to afford approximately 9 db (0ASPL) jet noise reduction relative to the JT8D-9 when compared on an equal static thrust basis. The JT8D-115 and JT8D-117 afford an 8 db and 6 db reduction, respectively, relative to the JT8D-9, at equal static thrust. Turbine exit swirl was found to have no significant effect on the jet noise of the JT8D-109 nozzle system.

Reed, D. H.↗