Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ion Exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Stable-Cycling Sustainable Na-Ion Batteries with Olivine Iron Phosphate Cathode in an Ether Electrolyte

Sustainable batteries using nontoxic, earth-abundant, and low-cost materials are key to decarbonization. Olivine NaFePO 4 fulfills these criteria, is attractive for Na-ion batteries, and can be derived from LiFePO 4 recycled from Li-ion battery wastes. Critical knowledge is needed for transforming LiFePO 4 to NaFePO 4 to enable such a sustainable, green engineering path toward high-performance Na-ion batteries. Herein, we report on the development of a stable-cycling, sustainable olivine iron phosphate-based Na-ion battery empowered by an improved understanding of materials transformation and electrolyte chemistry. First, we found that the conventional carbonate electrolyte with fluoroethylene carbonate additive causes an additional plateau (~2.4 V) at the end of the discharge process of the FePO 4 ||Na metal cell, leading to lower initial discharge capacity and voltage. This result shows that the voltage profile is influenced by not only intrinsic materials phase transformation during battery cycling but also the electrolyte additives and interphases formed. With the 1 M NaPF 6 diglyme electrolyte, we achieved an excellent capacity retention of 96% and 98% after 500 cycles at 1 and 5 C, respectively. Second, we chemically sodiated FePO 4 to form single-phase Na 0.9 FePO 4 . Na 0.9 FePO 4 ||hard carbon full cells demonstrated a remarkable capacity retention of ~84% at 3 and 5 C after 1000 cycles. The successful implementation of hard carbon, which can be derived from biomass waste, will further improve the sustainability of energy storage technologies. Our research demonstrates that electrolyte chemistry influences the voltage profile of phase-changing electrodes and provides effective electrolyte and full-cell design solutions for stable-cycling NaFePO 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Poly(phenylene) with high ion selectivity for use in anion exchange membranes

A method for synthesizing a poly(phenylene) with high ion selectivity comprises dissolving an alkyl halide poly(phenylene) in a polar aprotic solvent to form a nonaqueous solution and adding an anhydrous nucleophile to the nonaqueous solution to replace the halide of the alkyl halide poly(phenylene) with a cationic group of the nucleophile. The poly(phenylene) can be used in anion exchange membranes.

Fujimoto, Cy↗
DOE OSTI2025

Effect of energetic ions on edge-localized modes in tokamak plasmas

The most efficient and promising operational regime for the International Thermonuclear Experimental Reactor tokamak is the high-confinement mode. In this regime, however, periodic relaxations of the plasma edge can occur. These edge-localized modes pose a threat to the integrity of the fusion device. Here we reveal the strong impact of energetic ions on the spatio-temporal structure of edge-localized modes in tokamaks using nonlinear hybrid kinetic–magnetohydrodynamic simulations. A resonant interaction between the fast ions at the plasma edge and the electromagnetic perturbations from the edge-localized mode leads to an energy and momentum exchange. Energetic ions modify, for example, the amplitude, frequency spectrum and crash timing of edge-localized modes. The simulations reproduce some observations that feature abrupt and large edge-localized mode crashes. The results indicate that, in the International Thermonuclear Experimental Reactor, a strong interaction between the fusion-born alpha particles and ions from neutral beam injection, a main heating and fast particle source, is expected with predicted edge-localized mode perturbations. This work advances the understanding of the physics underlying edge-localized mode crashes in the presence of energetic particles and highlights the importance of including energetic ion kinetic effects in the optimization of edge-localized mode control techniques and regimes that are free of such modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Mechanistic Insights into Copper(I) and Copper(II) Cation Exchange Reactions in CdSe Nanoplatelets

In this study, we investigated the synthesis of copper selenide nanoplatelets (NPLs) through a cation exchange reaction (CER) in 5-monolayer-thick CdSe NPLs using Cu(I) and Cu(II) precursors. We discovered that the exposure of CdSe NPLs to a Cu(I) precursor led to the transformation of NPLs into Cu 2-x Se while maintaining their nanoplatelet morphology. The replacement of Cd(II) with Cu(I) prevailed over the formation of doped structures. In the case of the Cu(II) precursor, we observed that Cu(II) was first reduced to Cu(I) before being intercalated into the host lattice, resulting in the synthesis of Cu 2-x Se, similar to CER with Cu(I) precursors but without preservation of the initial morphology of NPLs. Interestingly, the presence of oxygen was found to facilitate the cation exchange processes in CdSe NPLs, whereas a nitrogen atmosphere suppressed the CER. Further, despite the similar ionic sizes of Cu(I) and Cu(II), the substitution of Cd(II) with Cu(II) was found to be challenging, possibly due to the involvement of redox processes resulting in the significant deterioration of initial CdSe NPLs. We demonstrate that CER can achieve near-complete substitution of cadmium atoms with monovalent copper at room temperature. Understanding the processes involved in CERs is crucial for engineering more complex structures, such as high-entropy nanoparticles involving cation exchange with different oxidation states and development of material synthesis using machine learning and artificial intelligence approaches.

2D nanoplatelets↗
DOE OSTI2024

A New Theoretical Framework for Designing Ion Transport Pathways

The rapid transport of specific ions through matter is critical to energy storage, membrane separations, and health. However, commercial materials resist ion transport, lack specificity, or both, making ion transport costly and ineffective. Inspiration for new material designs can be taken from biology, where membrane transport proteins exert exquisite control over the specificity and rate of ion transport. The challenge in understanding and designing transport pathways is that ions often exchange their hydrating waters for direct contacts with atoms in the transport pathway. Despite intense study over decades, no theory exists to explain local ion binding and transport mechanisms and experiments cannot differentiate reliably between ions and water in binding sites. Here, we developed a new approach, based on quantum methods and extension of the quasi-chemical free energy theory, to understand and design pathways through materials for rapid transport of specific ions. Understanding ion transport mechanisms will significantly advance our nation’s ability to develop cost-effective materials for energy sustainability and therapeutics for health.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Diffusion-Limited Kinetics of Isovalent Cation Exchange in III–V Nanocrystals Dispersed in Molten Salt Reaction Media

The goal of this work is to determine the kinetic factors that govern isovalent cation exchange in III–V colloidal quantum dots using molten salts as the solvent and cation source. We focus on the reactions of InP + GaI 3 → In 1 – x Ga x P and InAs + GaI 3 → In 1–x Ga x As to create technologically important ternary III–V phases. We find that the molten salt reaction medium causes the transformation of nearly spherical InP nanocrystals to tetrahedron-shaped In 1–x Ga x P nanocrystals. Furthermore, we determine that the activation energy for the cation exchange reaction is 0.9 eV for incorporation of Ga into InP and 1.2 eV for incorporation of Ga into InAs, both much lower than the measured values in bulk semiconductors. Next, we use powder XRD simulations to constrain our understanding of the structure of the In 1–x Ga x P nanocrystals. Together our results reveal several important features of molten salt-mediated cation exchange and provide guidance for future development of these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Membrane–Electrolyte System Approach to Understanding Ionic Conductivity and Crossover in Alkaline Flow Cells

Membrane transport properties are crucial for electrochemical devices, and these properties are influenced by the composition and concentration of the electrolyte in contact with the membrane. We apply this general membrane-electrolyte system approach to alkaline flow batteries, studying conductivity and ferricyanide crossover of Nafion and E-620. We report undetectable crossover for as-received Nafion and E-620 after both sodium and potassium exchange, but high ferricyanide permeability of 10 –7 to 10 –8 cm2 s –1 for Nafion subjected to pre-treatment prevalent in the flow battery literature. We show how the electrolyte mass fraction in hydrated membranes regulates the influence of ion concentration on membrane conductivity, identifying that increasing electrolyte concentration may not increase 1 membrane conductivity even when it increases electrolyte conductivity. To illustrate this behavior we introduce a new metric, the membrane penalty, as the ratio of the conductivity of the electrolyte to that of the membrane equilibrated with the electrolyte. We discuss the tradeoff between flow battery volumetric capacity and areal power density that arises from these findings. Finally, we apply insights from this approach to provide recommendations for use of membranes in alkaline flow cells, and electrochemical reactors in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis, structure and canted antiferromagnetism of layered cobalt hydroxide sorbate

Layered hybrid organic–inorganic compounds of the transition metal hydroxides, in which part of the hydroxide ions are exchanged for organic ligands that act as spacers of the 2-dimensional inorganic layers, elicit new or enhanced properties. The interlayer ligands enable fine-tuning of the physicochemical properties of the metal hydroxide layers, including their magnetism. Specifically, within the Co(OH) 2 family of transition ion hydroxides, this approach has been leveraged to stabilize antiferromagnetic and ferrimagnetic ground states for pillared and layered complexes, respectively. Here, in this work, we further investigate the effects of changing dimensionality, local Co coordination, and interlayer spacing on the magnetic ground state of brucite-like β-Co(OH) layered complexes. We report the hydrothermal synthesis of a new crystalline material, Co(OH)(sorb), where the inorganic layers are spaced by monotopic, doubly unsaturated sorbate ligands (sorb = [C 6 H 7 O 2 ] – ). The material was structurally characterized using powder X-ray and neutron diffraction measurements and the crystal structure was solved ab initio from powder diffraction data and refined using the Rietveld method. The magnetic susceptibility and magnetization measurements reveal canted antiferromagnetic ordering with T N = 41.7 K. This report augments our understanding of tuning magnetism through dimensionality in layered complexes and represents a step forward in the design of new 2D layered hybrid compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Isotope effects on energy transport in the core of ASDEX-Upgrade tokamak plasmas: Turbulence measurements and model validation

Design and operation of future tokamak fusion reactors using a deuterium–tritium 50:50 mix requires a solid understanding of how energy confinement properties change with ion mass. This study looks at how turbulence and energy transport change in L-mode plasmas in the ASDEX Upgrade tokamak when changing ion species between hydrogen and deuterium. For this purpose, both experimental turbulence measurements and modeling are employed. Local measurements of ion-scale (with wavevector of fluctuations perpendicular to the B-field k⊥< 2 cm−1, k⊥ρs< 0.2, where ρs is the ion sound Larmor radius using the deuterium ion mass) electron temperature fluctuations have been performed in the outer core (normalized toroidal flux ρTor=0.65−0.8) using a multi-channel correlation electron cyclotron emission diagnostic. Lower root mean square perpendicular fluctuation amplitudes and radial correlation lengths have been measured in hydrogen vs deuterium. Measurements of the cross-phase angle between a normal-incidence reflectometer and an ECE signal were made to infer the cross-phase angle between density and temperature fluctuations. The magnitude of the cross-phase angle was found larger (more out-of-phase) in hydrogen than in deuterium. TRANSP power balance simulations show a larger ion heat flux in hydrogen where the electron-ion heat exchange term is found to play an important role. These experimental observations were used as the basis of a validation study of both quasilinear gyrofluid trapped gyro-Landau fluid-SAT2 and nonlinear gyrokinetic GENE codes. Linear solvers indicate that, at long wavelengths (k⊥ρs<1), energy transport in the deuterium discharge is dominated by a mixed ion-temperature-gradient (ITG) and trapped-electron mode turbulence while in hydrogen transport is exclusively and more strongly driven by ITG turbulence. The Ricci validation metric has been used to quantify the agreement between experiments and simulations taking into account both experimental and simulation uncertainties as well as four different observables across different levels of the primacy hierarchy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Bipolar membrane polarization behavior with systematically varied interfacial areas in the junction region

The palette of applications for bipolar membranes (BPMs) has expanded recently beyond electrodialysis as they are now being considered for fuel cell and electrolysis applications. Their deployment in emerging electrochemical technologies arises from the need to have a membrane separator that provides disparate pH environments and to prevent species crossover. Most materials research for BPMs has focused on water dissociation catalysts and less emphasis has been given to the design of the polycation–polyanion interface for improving BPM performance. Here, soft lithography fabricated a series of micropatterned BPMs with precise control over the interfacial area in the bipolar junction. Polarization experiments showed that a 2.28× increase in interfacial area led to a 250 mV reduction in the onset potential. Additionally, the same increase in interfacial area yielded marginal improvements in current density due to the junction region being under kinetics-diffusion control. A simple physics model based on the electric field of the junction region rationalized the reduction in the overpotential for water dissociation as a function of interfacial area. Finally, the soft lithography approach was also conducive for fabricating BPMs with different chemistries ranging from perfluorinated polymer backbones to alkaline stable poly(arylene) hydrocarbon polymers. These polymer chemistries are better suited for fuel cell and electrolysis applications. The BPM featuring the alkaline stable poly(terphenyl) anion exchange membrane had an onset potential of 0.84 V, which was near the thermodynamic limit, and was about 150 mV lower than a commercially available variant.

25 ENERGY STORAGE↗
DOE OSTI2021

Effective cation exchange capacity of calcium silicate hydrates (C-S-H)

The binding of alkalis and calcium to calcium silicate hydrate (C-S-H) can be measured by cation exchange using cobalt hexamine solution with adapted pH. The effective cation exchange capacity (CEC) decreased at higher Ca/Si in C-S-H. A maximum of charge{sub exch}/Si of 0.08–0.10 was measured at Ca/Si = 0.8 decreasing to 0.01–0.02 at Ca/Si = 1.6. At high Ca/Si, only a minor fraction of Ca was present at exchangeable sites, while most of the Ca{sup 2+} present in interlayer or surface was specifically bound and thus not exchangeable. In contrast, sodium was present only at exchangeable sites in the C-S-H, more at low than at high Ca/Si. An increase of pH in the presence of 100 mmol/L NaOH increased the effective CEC of C-S-H by 5–10% indicating a limited influence of pH on the deprotonation of the silanol groups.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Simple separation of technetium from molybdenum for tracer isotope production

A procedure for the separation of technetium isotopes from bulk molybdenum was developed in nitric acid media. After irradiation of nat Mo foils, and dissolution in H 2 O 2 , the solution is acidified to 2 M HNO 3 , and anion exchange resin is used to separate technetium from molybdenum. The procedure is simple, requiring only basic laboratory equipment and, with a two-column separation, the technetium yield is high (~ 85%) with extremely high purity (< 0.1 ppm nat Mo). In conclusion, this is ideally suited for laboratory production of technetium tracer isotopes, particularly 95m Tc.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Room temperature doping of Ln 3+ in perovskite nanoparticles: a halide exchange mediated cation exchange approach

This study presents a halide exchange mediated cation exchange strategy for a room temperature doping of trivalent lanthanide cations (Ln 3+ ) in cesium lead halide (CsPbX 3 ) nanoparticles (NPs). Post-synthetic addition of LnCl 3 [Ln = Nd, Sm, Eu, Tb, Dy, and Yb] to a solution of CsPbBr 3 NPs generates the corresponding lanthanide doped NPs which display host sensitized Ln 3+ emission. Structural and spectroscopic characterizations indicate a successful halide exchange and substitutional displacement of Pb 2+ by Ln 3+ . The effect of halide identity in controlling the Ln 3+ sensitization was also evaluated. Here, a photophysical framework is presented that can be used to predict the Ln 3+ sensitization in perovskite NPs semiempirically, thereby removing the constraints of trial and error in designing a perovskite NP-Ln 3+ host–guest combination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

The production and separation of 161 Tb with high specific activity at the University of Utah

Targeted radiotherapy (TRT) is an increasingly prominent area of research in nuclear medicine, particularly in the context of treating cancerous tumors. One radionuclide of considerable interest for TRT is terbium-161 (t 1/2 = 6.95 days), which undergoes beta emission and shares similar decay properties as 177 Lu (FDA-approved as LUTATHERA® and PLUVICTO®). Besides beta emission, 161 Tb also emits a significant number of conversion and Auger electrons further enhancing its therapeutic potential. Terbium-161 can be produced using nuclear reactors through an indirect neutron capture reaction, $^{160}_{64}$Gd(n,γ) $^{161}_{64}$Gd → (3.7 min, β – ) $^{161}_{65}$Tb, from 160 Gd targets. However, a key challenge in utilizing 161 Tb for TRT lies in effectively separating target and product materials to attain high specific activity for radiolabeling. Here, we detail the production of no-carrier added 161 Tb using low flux research reactors (mean thermal (< 0.625 eV) neutron flux: 1.356 ×10 12 n • cm –2 • s –1 ) like the University of Utah TRIGA Reactor, using enriched 160 Gd 2 O 3 targets (1.5 ± 0.3 µCi of 161 Tb per mg of 160 Gd target per hour of irradiation). We also developed a separation technique based on cation exchange and extraction chromatography, suitable for mCi level irradiations with targets exceeding 200 milligrams. In a simulated full-scale irradiation, 161 Tb was successfully isolated from large mass targets using cation exchange (AG 50W-X8, with 2-hydroxyisobutyric acid at 70 mM, pH 4.75) and extraction chromatography (LN Resin, 0.5 – 0.75 M HNO 3 ) methods. Here, this resulted in high apparent molar activities of [ 161 Tb]Tb-DOTA (113 ± 3 MBq/nmol), demonstrating high purity 161 Tb relevant for potential future preclinical applications.

161Tb↗
DOE OSTI2021

The anion exchange properties of AFm (hydrocalumite-group) minerals defined from solubility experiments and crystallographic information

Solubility experiments with binary series of OH-, Cl-, SO{sub 4}- and CO{sub 3}-AFm were re-examined with a non-ideal, multicomponent solid solution model. The electrical double layer on the mineral's outer surface, which neutralizes about 5% of the anionic charge, can be included. The choice of the end-members in the solid solution and the reaction formulation can help to eliminate the ‘non-ideality’ for OH-SO{sub 4} and Cl-OH exchange. CO{sub 3}-Cl-OH exchange is not ideal in the solubility experiments, nor can it be, because the mineral volume is not a linear combination of the end-members. The solubilities of the end-members are related to the anion charge and inversely to the anion-layer thickness. OH is part of the anion-charge, even when a pure, other anion form is the target of the synthesis. Pure OH-AFm is unstable and converts into hydrogarnet and portlandite, depending on the precipitation rate of hydrogarnet.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ammonium-Coordinated Exchanger (ACE) Sorbents for Aqueous Oxyanion Metal Recovery/Removal

Ammonium coordinated exchanger (ACE) sorbents recovery/remove anionic contaminant/critical metals from water. Heavy reliance of the U.S. on foreign critical mineral (CM) supplies presents national security and economics risks. This prompted government action. Domestically recovering CM from unconventional water sources, largely through adsorption processes, could alleviate this problem. Acid mine drainage and mineral leachates are viable sources

amines↗
DOE OSTI2025

Cation uptake by fine aggregate in hardened cement mortar and its effect on electrical properties

Electrical resistivity tests can be used to evaluate the transport properties of concrete and provide a durability assessment. However, the electrical resistivity is largely dependent on the pore solution composition and recent work suggests that some aggregates have the capacity for cation uptake. This study first aims to provide further evidence for adsorption of cations on aggregate surfaces, without formation of reaction products (e.g. alkali-silica reaction). Secondly, hardened mortar samples were prepared using a fine aggregate with a high alkali affinity and a non-reactive fine aggregate as a control. The electrical resistivity of mortars was measured, and the pore solution of these mortars was obtained through high-pressure extraction. The effect of aggregate moisture dilution on the pore solution was decoupled by using a pore partitioning model. The results indicate that aggregate minerology can influence the pore solution composition through cation uptake. Specific minerals of minor quantity, like biotite, may be responsible for cation exchange. While adsorbed cations strongly affected pore solution and formation factor measurement, the bulk resistivity measurements on hardened mortar were only marginally influenced. Research on other implications of similar aggregate interactions with pore solutions are an intriguing area for future research.

Alkali-aggregate reaction↗