Characteristics of a Lunar Landing Configuration Having Various Multiple-Leg Landing-Gear Arrangements
An experimental investigation has been made of some lunar-landing characteristics of a 1/6-scale dynamic model of a landing module having multiple-leg landing-gear systems. Symmetric four-point and five-point systems were investigated. The landing-gear legs were inverted tripod arrangements having a telescoping main strut which incorporated a yielding-metal strap for energy dissipation, hinged V-struts, and circular pads. The landing tests were made by launching a free model onto an impenetrable hard surface (concrete) and onto a powdered-pumice overlay of various depths. Landing motion and acceleration data were obtained for a range of touchdown speeds, touchdown attitudes, and landing-surface conditions. Maximum normal acceleration experienced at the module center of gravity during landings on hard surface or pumice was 2g (full-scale lunar value in terms of earth's gravity) over a wide range of touchdown conditions. acceleration experienced was 12 1/2 radians/sec(exp 2) and maximum longitudinal acceleration was 1 3/4g. The module was very stable with all gear configurations during landings on hard surface (coefficient of friction, micron = 0.4) at all conditions tested. Some overturn instability occurred during landings on powdered pumice (micron = 0.7 to 1.0) depending upon flight path, pitch and yaw attitude, depth of pumice, surface topography, and landing-gear configuration. The effect on stability of roll attitude for the limited amount of roll-attitude landing data obtained was insignificant. Compared with the four-point landing gear, the five-point system with equal maximum gear radius increased landing stability slightly and improved the static stability for subsequent lunar launch. A considerable increase in landing stability in the direction of motion was obtained with an asymmetric four-point gear having two pads offset to increase gear radius by 33 percent in the direction of horizontal flight.