Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISING MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Magnetic and metal-insulator transitions in coupled spin-fermion systems

We use quantum Monte Carlo to determine the magnetic and transport properties of coupled square lattice spin and fermionic planes as a model for a metal-insulator interface. Specifically, layers of Ising spins with an intra-layer exchange constant J interact with the electronic spins of several adjoining metallic sheets via a coupling JH. When the chemical potential cuts across the band center, that is, at half-filling, the Neel temperature of antiferromagnetic (J > 0) Ising spins is enhanced by the coupling to the metal, while in the ferromagnetic case (J < 0) the metallic degrees of freedom reduce the ordering temperature. In the former case, a gap opens in the fermionic spectrum, driving insulating behavior, and the electron spins also order. This induced antiferromagnetism penetrates more weakly as the distance from the interface increases, and also exhibits a non-monotonic dependence on JH. For doped lattices an interesting charge disproportionation occurs where electrons move to the interface layer to maintain half-filling there.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cosmic ray He3 measurements

Cosmic ray 3He/4H3 observations, including a new measurement at approximately 65 MeV/nucleon from ISEE-3, are compared with interstellar propagation and solar modulation models in an effort to understand the origin of cosmic ray He nuclei.

Mewaldt, R. A.↗

ISEE System Technical Report

The Immersive Simulations and Engineering Environment (ISEE) Laboratory at Kennedy Space Center is a tool used to assist with operation simulation, for Human Factors operation activities, assisting future missions. The simulations created are important because they ensure that simulated operations are performed for customers, to assist with requirements. Simultaneously, each simulation will allow stakeholders to determine any and all risk associated with the Human Factors involved in a specific assignment. My internship consists of multiple project elements. The first of which, was to assist the Integrations branch chief in developing a growth rate algorithm proof. The integral part of this project, involved learning to powerup and perform the operational procedures of the ISEE lab, capturing and creating characters used in the CAD model virtual environment. In doing so, this led to use the software to model and 3D print screw cap structures for mock-up. The structures will be used to manipulate weight change out used in mock-up design and construction. These structures will also be used in future mock-up models constructed in the lab.

Darryl A J Minor↗

Observations of the magnetopause current layer: Cases with no boundary layer and tests of recent models

Evidence for the probable existence of magnetospheric boundary layers was first presented by Hones, et al. (1972), based on VELA satellite plasma observations (no magnetic field measurements were obtained). This magnetotail boundary layer is now known to be the tailward extension of the high-latitude boundary layer or plasma mantle (first uniquely identified using HEOS 2 plasma and field observations by Rosenbauer et al., 1975) and the low-latitude boundary layer (first uniquely identified using IMP 6 plasma and field observations by Eastman et al., 1976). The magnetospheric boundary layer is the region of magnetosheath-like plasma located Earthward of, but generally contiguous with the magnetopause. This boundary layer is typically identified by comparing low-energy (less than 10 keV) ion spectra across the magnetopause. Low-energy electron measurements are also useful for identifying the boundary layer because the shocked solar wind or magnetosheath has a characteristic spectral signature for electrons as well. However, there are magnetopause crossings where low-energy electrons might suggest a depletion layer outside the magnetopause even though the traditional field-rotation signature indicates that this same region is a boundary layer Earthward of the current layer. Our analyses avoided crossings which exhibit such ambiguities. Pristine magnetopause crossings are magnetopause crossings for which the current layer is well defined and for which there is no adjoining magnetospheric boundary layer as defined above. Although most magnetopause models to date apply to such crossings, few comparisons between such theory and observations of pristine magnetopause crossings have been made because most crossings have an associated magnetospheric boundary layer which significantly affects the applicable boundary conditions for the magnetopause current layer. Furthermore, almost no observational studies of magnetopause microstructure have been done even though key theoretical issues have been discussed for over two decades. This is because plasma instruments deployed prior to the ISEE and AMPTE missions did not have the required time resolution and most ISEE investigations to-date have focused on tests of MHD plasma models, especially reconnection. More recently, many phenomenological and theoretical models have been developed to explain the existence and characteristics of the magnetospheric boundary layers with only limited success to date. The cases with no boundary layer treated in this study provide a contrary set of conditions to those observed with a boundary layer. For the measured parameters of such cases, a successful boundary layer model should predict no plasma penetration across the magnetopause. Thus, this research project provides the first direct observational tests of magnetopause models using pristine magnetopause crossings and provides important new results on magnetopause microstructure and associated kinetic processes.

Eastman, Timothy E.↗

Role of Matter Interactions in Superradiant Phenomena

The superradiant phenomenon, usually described by the Dicke model, is a hallmark of strong light-matter interaction. Here, we explore how matter-matter interactions influence this phenomenon by performing ground-state simulations of Dicke-like models with both isotropic and anisotropic interactions. We find that Ising-type interactions produce two qualitatively distinct phase boundaries, one of which gives rise to an antiferromagnetic-normal phase connected to the superradiant regime via a first-order phase transition. Under anisotropic couplings, we uncover a strongly correlated phase where in-plane spin order coexists with superradiance, exhibiting sublinear scaling of the photon occupation per site and power-law decay of spin correlations. Furthermore, superradiance is strengthened by tuning either isotropic or anisotropic interactions, highlighting the role of intrinsic many-body correlations in shaping light-matter quantum phases.

Dicke model↗

An ISEE 3 study of average and substorm conditions in the distant magnetotail

Both average and substorm conditions in the distant magnetotail were investigated using ISEE 3 magnetic field and plasma observations. The diameter of the tail, the strength of the lobe magnetic fields, and their dependence on downstream distance were all found to agree well with the flaring tail models of magnetopause geometry and pressure balance. The gradual filling of the lobes by mantle plasma reported in previous ISEE 3 studies were further investigated, and the results were found to be in qualitative agreement with leaky magnetopause model of Pilipp and Morfill (1978). The variations of plasma parameters with X + or -Y, and AE in the plasma sheet were examined. At all distances, the greatest tailward flow speeds were found to be directly proportional to the embedded southward B(z). THe magnitudes of tailward V(x) and southward B(z) are directly proportional to the level of substorm activity near the earth as measured by the AE index.

Slavin, J. A.↗

Ising spin ladders of orthopyroxene CoGeO 3

Here, we present thermodynamic and spectroscopic measurements for an orthopyroxene CoGeO 3 with magnetic Co 2+ ions that form quasi-one-dimensional ladders. We show that noncollinear magnetic order below 𝑇 𝑁 = 32 K can be stabilized by a strong local easy-axis anisotropy of 𝑗 eff = 1/2 moments, which is induced by ligand octahedra distortions. Extraction of a magnetic Hamiltonian from inelastic neutron scattering measurements supports this interpretation and allows us to establish an effective magnetic model. The resulting exchange Hamiltonian justifies CoGeO 3 as a realization of an Ising spin ladder compound.

Maksimov, Pavel A. [Joint Inst. for Nuclear Resear↗

The range of non-Kitaev terms and fractional particles in α-RuCl 3

Significant efforts have focused on the magnetic excitations of relativistic Mott insulators, predicted to realize the Kitaev quantum spin liquid (QSL). This exactly solvable model involves a highly entangled state resulting from bond-dependent Ising interactions that produce excitations which are non-local in terms of spin flips. A key challenge in real materials is identifying the relative size of the non-Kitaev terms and their role in the emergence or suppression of fractional excitations. Here, we identify the energy and temperature boundaries of non-Kitaev interactions by direct comparison of the Raman susceptibility of α-RuCl 3 with quantum Monte Carlo (QMC) results for the Kitaev QSL. Moreover, we further confirm the fractional nature of the magnetic excitations, which is given by creating a pair of fermionic quasiparticles. Interestingly, this fermionic response remains valid in the non-Kitaev range. Our results and focus on the use of the Raman susceptibility provide a stringent new test for future theoretical and experimental studies of QSLs.

36 MATERIALS SCIENCE↗

Relationships between a potential field-source surface model of the coronal magnetic field and properties of the solar wind at 1 AU

A comparison is made between the properties at the source surface of a potential field model of the solar corona and solar wind properties observed with ISEE 3 at 1 AU and extrapolated back to the sun. This is done for three consecutive Carrington rotations in the summer of 1979. The already known properties of a velocity minimum at the interplanetary current sheet and a tendency for the average velocity to increase with longitudinal distance from the current sheet are recovered. A better correlation between source surface properties and velocity is demonstrated by using the field strength on the source surface rather than longitudinal distance from the current sheet. Applying a simple algorithm to distinguish between transient and corotating interplanetary variations substantially increases the correlation. However, given a reasonable estimate of the number of degrees of freedom for the sample, only the correlation between source surface field strength and flow speed after the transients have been eliminated is statistically significant at the 1 percent level.

Suess, S. T.↗

Remote sensing of the ring current using energetic neutral atoms

Energetic neutral atom images of the storm-time ring current obtained from the ISEE-1 spacecraft provide information for a 'zero-order' global model of the energetic ion distribution. With the assumption of isotropic pressure and magnetostatic, nonconvective pressure balance, the global system of electrical currents driven by the ion pressure can be calculated using Euler potentials for the divergenceless current density. Radial pressure gradients drive azimuthal currents, and azimuthal pressure gradients drive radial currents. The radial currents cause current lines in the inner magnetosphere to close in the ionosphere, forming a partial ring current. The intensities and locations of these field-aligned currents driven into and out of the ionosphere resemble those of the observed Region 2 current system, but not all observed properties of the Region 2 system are reproduced by the zero-order model.

Roelof, Edmond C.↗

Solar flares and avalanches in driven dissipative systems

The contention of Lu and Hamilton (1991) that the energy release process in solar flares can be understood as avalanches of many small reconnection events is further developed. The dynamics of the complex magnetized plasma of solar active regions is modeled with a simple driven dissipative system, consisting of a vector field with local instabilities that cause rapid diffusion of the field. It is argued that the avalanches in this model are analogous to solar flares. The distributions of avalanches in this model are compared with the solar flare frequency distributions obtained from ISEE 3/ICE satellite observations. Quantitative agreement is found with the energy, peak luminosity, and duration distributions over four orders of magnitude in flare energy, from the largest flares down to the completeness limit of the observations. It is predicted that the power-law solar flare frequency distributions will be found to continue downward with the same logarithmic slopes to an energy of about 3 x 10 exp 25 ergs and duration of about 0.3 s, with deviations from power-law behavior below these values.

Lu, Edward T.↗

Three-state Potts nematic order in stacked frustrated spin models with SO(3) symmetry

Here, we propose stacked two-dimensional lattice designs of frustrated and SO(3) symmetric spin models consisting of antiferromagnetic (AF) triangular and ferromagnetic (FM) sixfold symmetric sublattices that realize emergent $\mathbb{Z}_{3}$ Potts nematic order. Considering bilinear-biquadratic spin interactions, our models describe an SO(3)-symmetric triangular lattice AF subject to a fluctuating magnetization arising from the FM coupled sublattice. We focus on the classical AFM-FM windmill model and map out the zero- and finite-temperature phase diagram using Monte Carlo simulations and analytical calculations. We discover a state with composite Potts nematic order above the ferrimagnetic three-sublattice up-up-down ground state and relate it to Potts phases in SO(3)-broken Heisenberg and Ising AFMs in external magnetic fields. Finally, we show that the biquadratic exchange in our model is automatically induced by thermal and quantum fluctuations in the purely bilinear Heisenberg model, easing the requirements for realizing these lattice designs experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantifying Grain Level Stress-Strain Behavior for AM40 via Instrumented Microindentation

ABSTRACT Microindentation is performed on hot isostatic pressed (HIP) Mg-Al (AM40) alloy samples produced by high-pressure die cast (HPDC) process for the purpose of quantifying the mechanical properties of the α-Mg grains. The process of obtaining elastic modulus and hardness from indentation load-depth curves is well established in the literature. A new inverse method is developed to extract plastic properties in this study. The method utilizes empirical yield strength-hardness relationship reported in the literature together with finite element modeling of the individual indentation. Due to the shallow depth of the indentation, indentation size effect (ISE) is taken into account when determining plastic properties. The stress versus strain behavior is determined for a series of indents. The resulting average values and standard deviations are obtained for future use as input distributions for microstructure-based property prediction of AM40.

AM40↗

Reexamination of the evidence for entanglement in a quantum annealer

A recent experiment claimed to provide evidence of up to eight-qubit entanglement in a D-Wave quantum annealing device. However, entanglement was measured using qubit tunneling spectroscopy, a technique that provides indirect access to the state of the system at intermediate times during the anneal by performing measurements at the end of the anneal with a probe qubit. In addition, an underlying assumption was that the quantum transverse-field Ising Hamiltonian, whose ground states are already highly entangled, is an appropriate model of the device and not some other (possibly classical) model. This begs the question of whether alternative classical or semiclassical models would be equally effective at predicting the observed spectrum and thermal state populations. To check this, we consider a recently proposed classical rotor model with classical Monte Carlo updates, which has been successfully employed in describing features of earlier experiments involving the device. Further, we consider simulated quantum annealing with quantum Monte Carlo updates, an algorithm that samples from the instantaneous Gibbs state of the device Hamiltonian. Finally, we use the quantum adiabatic master equation, which cannot be efficiently simulated classically and which has previously been used to successfully capture the open-system quantum dynamics of the device. We find that only the master equation is able to reproduce the features of the tunneling spectroscopy experiment, while both the classical rotor model and simulated quantum annealing fail to reproduce the experimental results. We argue that this bolsters the evidence for the reported entanglement.

74 ATOMIC AND MOLECULAR PHYSICS↗

Implementation of ISEE-3 trajectory control

Control of the trajectory and attitude for the International Sun-Earth Explorer-3 (ISEE-3) spacecraft is performed using an onboard hydrazine propulsion system. This paper describes the spacecraft hardware and operational limitations that were considered in the planning, execution, and evaluation of all ISEE-3 maneuvers performed to date. Propulsion system performance and spacecraft dynamics models as implemented in the maneuver support computer software are described. Examples are presented that show how maneuver goals are achieved while satisfying mission orbit and attitude constraints. Procedures used in the development of maneuver plans are detailed for the second midcourse correction maneuver which typifies maneuver operations in general.

Erickson, J. A.↗

Modeling the potential of screen printed front junction CZ silicon solar cell with tunnel oxide passivated back contact

Carrier selective passivated contacts composed of thin oxide, n + polycrystalline Si and metal on top of a n-Si absorber can significantly lower the recombination current density (J orear ≤8 fA/cm 2 ) under the contact while providing excellent specific contact resistance (5–10 mΩ-cm 2 ); 25.1% efficient small area cells with photolithography front contacts on boron doped selective emitter and Fz wafers have been achieved by Fraunhofer ISE using their tunnel oxide passivated contact (TOPCon) approach. This paper shows a methodology to model such passivated contact cells using Sentaurus device model, which involves replacing the TOPCon region by carrier selective electron and hole recombination velocities to match the measured J orear of the TOPCon region as well as all the light IV values of the cell. We first validated the methodology by modeling a 24.9% reference cell. The model was then extended to assess the efficiency potential of large area TOPCon cells on commercial grade n-type Cz material with screen-printed front contacts. To use realistic input parameters, a 21% n-type PERT cell was fabricated on Cz wafer (5 Ω-cm, 1.5-ms lifetime). Modeling showed that the cell efficiency will improve to only 21.6% if the back of this cell is replaced by the above TOPCon, and the performance is limited by the homogenous emitter. Efficiency was then modeled to improve to 22.6% with the implementation of selective emitter (150/20 Ω/sq). Lastly, it is shown that screen printing of 40-µm-wide lines and improved bulk material (10 Ω-cm, 3-ms lifetime) can raise the single side TOPCon Cz cell efficiency to 23.2%.

14 SOLAR ENERGY↗

A comparison of helium and heavy ion spectra in He/3/ rich solar flares with a model calculation

He isotopes, O and Fe in He(3) rich solar flares are studied during the 1977 to 1979 period with the MPI/UoMd particle experiment on ISEE-1 and ISEE-3. The study revealed that the He(3) spectrum is generally harder than that of He(4), and the O spectrum is harder than that of Fe. The spectra are compared with a stationary model based on stochastic Fermi acceleration in Alfven turbulence including a rigidity dependent particle loss. Model calculations fit the He(3) and He(4) spectra between 0.4 and 4.0 MeV/nucleon, with discrepancies at lower and higher energies, and the O and Fe spectra cannot be fitted simultaneously.

Mobius, E.↗