Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

The albedo, effective temperature, and energy balance of Neptune, as determined from Voyager data

Data from the Voyager infrared spectrometer and radiometer (IRIS) investigation are used in determining the albedo, effective temperature, and energy balance of Neptune. From broadband radiometric observations made at phase angles of 14 deg and 134 deg, together with measurements at intermediate phase angles from the literature, an orbital mean value of 0.290 +/-0.067 is obtained for the bolometric Bond albedo. This yields an equilibrium temperature Teq = 46.6 +/-1.1 K. From thermal spectra obtained over latitudes from pole to pole an effective temperature Teff = 59.3 +/-0.8 K is derived. This represents a substantial improvement over previously determined values. The energy balance of Neptune is therefore E = 2.61 +/-0.28, which is in agreement with previous results. The reduced uncertainty in this value is due to the improved determination of the effective temperature.

Pearl, J. C.↗

Hydrocarbons in Neptune's stratosphere from Voyager infrared observations

The ethane and acetylene emissions observed in the Voyager IR spectra of Neptune are analyzed. The mean hydrocarbon abundances are derived from a comparison of the disk-averaged spectral selection with synthetic spectra, using updated temperature information from the Voyager 2 radio occultation data and constraints from the ground-based stellar occultation measurements. The observations are used to test photochemical models generated for various eddy mixing profiles and stratospheric methane mole fractions. Finally, the altitudinal variability of the acetylene emission strength was investigated from a large set of IRIS spectra, and the derived variation is compared with that observed at lower wavenumbers (250 and 350 per cm) where the troposphere and the lower stratosphere are probed.

Bezard, Bruno↗

Ionospheric ion composition from satellite measurements made during 1970-1980 - Altitude profiles

Ion-mass spectrometers were carried by a number of satellites in the 1970s. The ion-composition measurements from two of these missions, the Orbiting Geophysical Observatory-6 and the Atmosphere Explorer-C, are collected into an ion composition data base to evaluate several widely used empirical and theoretical models for the species H(+), He(+), N(+), O(+), NO(+), N2(+), and O2(+). The data base covers all latitudes and local times, and the altitude range from 150 km to 1200 km, but here altitude plots are presented of the ion densities at noon and at dip latitudes of 20-40 deg N. The satellite data are compared with an early ion-density profile, with the Koehnlein and IRI-90 empirical models, and with the Utah State University theoretical ionosphere model. These comparisons serve to verify some aspects of the models, but they also reveal some outstanding differences. The solar activity dependence of H(+), He(+), N(+), and O(+) is demonstrated, although this has not been possible for the molecular ions because low altitude measurements have not been made near solar maximum.

Hoegy, W. R.↗

Solar-terrestrial models at the National Space Science Data Center

The National Space Science Data Center (NSSDC) and World Data Center A for Rockets and Satellites (WDC-A-R&S) has a long record of participation in the worldwide efforts to establish and improve empirical models for the different regions of the solar-terrestrial environment. The center maintains a unique archive of solar-terrestrial models and related applications software, described in a recently published models catalog. The software packages are distributed on tape, diskette, and on-line on the Space Physics Analysis Network (SPAN). Four of the most frequently requested models (IRI, MSIS/CIRA, IGRF, AE-8/AP-8) can also be accessed and run on the NSSDC Online Documentation and Information Service (NODIS) account, which can be reached from any SPAN node.

Bilitza, D.↗

Ortho-para-hydrogen equilibration on Jupiter

Voyager IRIS observations reveal that the Jovian para-hydrogen fraction is not in thermodynamic equilibrium near the NH3 cloud top, implying that a vertical gradient exists between the high-temperature equilibrium value of 0.25 at depth and the cloud top values. The height-dependent para-hydrogen profile is obtained using an anisotropic multiple-scattering radiative transfer model. A vertical correlation is found to exist between the location of the para-hydrogen gradient and the NH3 cloud, strongly suggesting that paramagnetic conversion on NH3 cloud particle surfaces is the dominant equilibration mechanism. Below the NH3 cloud layer, the para fraction is constant with depth and equal to the high-temperature equilibrium value of 0.25. The degree of cloud-top equilibration appears to depend on the optical depth of the NH3 cloud layer. Belt-zone variations in the para-hydrogen profile seem to be due to differences in the strength of the vertical mixing.

Carlson, Barbara E.↗

Implementation of control point form of algebraic grid-generation technique

The control point form (CPF) provides explicit control of physical grid shape and grid spacing through the movement of the control points. The control point array, called a control net, is a space grid type arrangement of locations in physical space with an index for each direction. As an algebraic method CPF is efficient and works well with interactive computer graphics. A family of menu-driven, interactive grid-generation computer codes (TURBO) is being developed by using CPF. Key features of TurboI (a TURBO member) are discussed and typical results are presented. TurboI runs on any IRIS 4D series workstation.

Choo, Yung K.↗

The structure, stability, and global distribution of Io's atmosphere

The paper reports on high-resolution millimeter-wave spectroscopic observations of Io carried out in 1990 and 1991 which allowed the first unambiguous ground-based detection of SO2 in Io's atmosphere. A reassessment of the IRIS-Voyager observations of the nu3 band of SO2 is presented, and it is shown that non-LTE effects are important in the formation of this band. It is thus concluded that the global SO2 atmosphere observed from earth has characteristics (pressure, temperature) similar to those observed at Loki by Voyager. The paper concludes with a simple thermal model of Io's lower atmosphere and a discussion of new upper limits that can be placed on the presence of H2S, SO, and CO in Io's atmosphere.

Lellouch, Emmanuel↗

Groundbased near-IR observations of the surface of Venus

We present images of the nightside of Venus taken in the near-infrared windows at 1.0, 1.1, 1.18, 1.28, 1.31, and 2.3 microns with the new infrared camera/spectrometer IRIS on the Anglo-Australian Telescope. These data were taken in spectral-mapping mode. This technique involves scanning the telescope perpendicular to the slit, while collecting spectra at successive slit positions across the planet. We produce data cubes with one spectral and two spatial dimensions. Images can be extracted over any wavelength regions. Each image has square pixels of 0.8 inch resolution. We reduced the scattered light from the sunlit crescent in images extracted from each window by subtracting images taken on either side of the window, where the Venus atmosphere is opaque. Unlike the short wavelength windows, which reveal thermal contrasts that originate primarily from the surface and deep atmosphere, the emission in the 2.3 microns window is produced at much higher altitudes (30-40 km). Emission contrasts seen near 2.3 microns are associated with horizontal variations in the cloud optical depths, and have rotation periods of about six days. We detect large contrasts in infrared emission (20-40 percent) across the disc of Venus in the 1.0-, 1.1-, 1.18-, 1.28-, and 1.31-micron images. Contrasts at these wavelengths may be due to a combination of variations in the optical depths of the overlying sulfuric acid clouds and differences in surface emission. Comparison with the 2.3-micron images show that the patterns seen in the 1.28- and 1.31-micron windows are consistent with cloud optical depth variations alone and require no contribution from the surface. However, images at 1.0, 1.1, and 1.8 microns from July 1991 show a dark feature having a contrast that increases with decreasing wavelength. This behavior is contrary to that expected of cloud absorption. Images taken on three successive days in October show another dark feature that is stationary with respect to the surface. These regions of lower emission correspond closely to the high-altitude surface regions of Beta Regio and Aphrodite Terra. The images can potentially reveal the near-infrared emissiveity of the surface of Venus, thereby complementing Magellan radar reflectivity and ground based radio emissivity measurements. The contrast ratio between highlands and plains is much smaller than would be expected for blackbody radiation from the surface along. Unlike at radio wavelengths, where the atmosphere is essentially transparent, at near-infrared wavelengths the atmosphere emits, absorbs, and scatters radiation, and can modify the observed topographically induced contrasts. The additional radiation from the atmosphere reduces the contrast, and further modification would be expected if terrain at different altitudes has different emissivities. A fit to our data therefore requires, and may constrain, a model of the lowest scale height of the atmosphere.

Meadows, V. S.↗

Navier-Stokes calculation of transonic flow past the NTF 65-deg delta wing

Viscous flow past a wind tunnel model of a 65-degree swept angle Delta wing at transonic speeds is being studied. The model was tested in the 8-foot cryogenic transonic wind tunnel at the National Transonic Facility. Aerodynamic forces and wing surface pressure data were obtained at various angles of attack, Mach numbers, and Reynold's numbers for four different leading edges of the wing. The objectives of the present investigation are: (1) to perform numerical modeling of the flow around the wing; (2) to validate the experimental data with a Navier-Stokes computational fluid dynamics code and vice versa; (3) to investigate the effects of the sting mount of the wing; (4) to evaluate the effects of leading edge radius on the flow; and (5) to explain the Reynold's number effect as indicated by the test data. Several computer programs were developed to define the surfaces of the wing, the four leading edges, and the sting mount. Based on these geometric databases, the surface grids of a single-block computational domain was generated interactively on the IRIS workstation using the GRIDGEN2D module of GRIDGEN. To refine the grids and to avoid excessive loss of grid points due to collapsed edges, a 9-block computational domain containing approximately 750,000 grid points was developed with the GRIDBLOCK module to replace the single-block grid.

Wu, Chivey↗

Studies of regional and global tectonics and the rotation of the earth using very-long-baseline interferometry

Work is continuing on the study of atmospheric gradients. We include a preprint entitled 'The effect of turbulence on atmospheric gradient parameters determined from ground-based radiometric and space geodetic measurements'. Work has begun on a study of solid Earth tidal deformations using the VLBI data set. We have examined deformations at the semi-diurnal tidal period using the IRIS data set.

Shapiro, Irwin I.↗

TRAC based sensing for autonomous rendezvous

The Targeting Reflective Alignment Concept (TRAC) sensor is to be used in an effort to support an Autonomous Rendezvous and Docking (AR&D) flight experiment. The TRAC sensor uses a fixed-focus, fixed-iris CCD camera and a target that is a combination of active and passive components. The system experiment is anticipated to fly in 1994 using two Commercial Experiment Transporters (COMET's). The requirements for the sensor are: bearing error less than or equal to 0.075 deg; bearing error rate less than 0.3 deg/sec; attitude error less than 0.5 deg.; and attitude rate error less than 2.0 deg/sec. The range requirement depends on the range and the range rate of the vehicle. The active component of the target is several 'kilo-bright' LED's that can emit 2500 millicandela with 40 milliwatts of input power. Flashing the lights in a known pattern eliminates background illumination. The system should be able to rendezvous from 300 meters all the way to capture. A question that arose during the presentation: What is the life time of the LED's and their sensitivity to radiation? The LED's should be manufactured to Military Specifications, coated with silicon dioxide, and all other space qualified precautions should be taken. The LED's will not be on all the time so they should easily last the two-year mission.

Everett, Louis J.↗

Operator-assisted planning and execution of proximity operations subject to operational constraints

Future multi-vehicle operations will involve multiple scenarios that will require a planning tool for the rapid, interactive creation of fuel-efficient trajectories. The planning process must deal with higher-order, non-linear processes involving dynamics that are often counter-intuitive. The optimization of resulting trajectories can be difficult to envision. An interaction proximity operations planning system is being developed to provide the operator with easily interpreted visual feedback of trajectories and constraints. This system is hosted on an IRIS 4D graphics platform and utilizes the Clohessy-Wiltshire equations. An inverse dynamics algorithm is used to remove non-linearities while the trajectory maneuvers are decoupled and separated in a geometric spreadsheet. The operator has direct control of the position and time of trajectory waypoints to achieve the desired end conditions. Graphics provide the operator with visualization of satisfying operational constraints such as structural clearance, plume impingement, approach velocity limits, and arrival or departure corridors. Primer vector theory is combined with graphical presentation to improve operator understanding of suggested automated system solutions and to allow the operator to review, edit, or provide corrective action to the trajectory plan.

Grunwald, Arthur J.↗

Adaptive fuzzy system for 3-D vision

An adaptive fuzzy system using the concept of the Adaptive Resonance Theory (ART) type neural network architecture and incorporating fuzzy c-means (FCM) system equations for reclassification of cluster centers was developed. The Adaptive Fuzzy Leader Clustering (AFLC) architecture is a hybrid neural-fuzzy system which learns on-line in a stable and efficient manner. The system uses a control structure similar to that found in the Adaptive Resonance Theory (ART-1) network to identify the cluster centers initially. The initial classification of an input takes place in a two stage process; a simple competitive stage and a distance metric comparison stage. The cluster prototypes are then incrementally updated by relocating the centroid positions from Fuzzy c-Means (FCM) system equations for the centroids and the membership values. The operational characteristics of AFLC and the critical parameters involved in its operation are discussed. The performance of the AFLC algorithm is presented through application of the algorithm to the Anderson Iris data, and laser-luminescent fingerprint image data. The AFLC algorithm successfully classifies features extracted from real data, discrete or continuous, indicating the potential strength of this new clustering algorithm in analyzing complex data sets. The hybrid neuro-fuzzy AFLC algorithm will enhance analysis of a number of difficult recognition and control problems involved with Tethered Satellite Systems and on-orbit space shuttle attitude controller.

Mitra, Sunanda↗

LARCRIM user's guide, version 1.0

LARCRIM is a relational database management system (RDBMS) which performs the conventional duties of an RDBMS with the added feature that it can store attributes which consist of arrays or matrices. This makes it particularly valuable for scientific data management. It is accessible as a stand-alone system and through an application program interface. The stand-alone system may be executed in two modes: menu or command. The menu mode prompts the user for the input required to create, update, and/or query the database. The command mode requires the direct input of LARCRIM commands. Although LARCRIM is an update of an old database family, its performance on modern computers is quite satisfactory. LARCRIM is written in FORTRAN 77 and runs under the UNIX operating system. Versions have been released for the following computers: SUN (3 & 4), Convex, IRIS, Hewlett-Packard, CRAY 2 & Y-MP.

Davis, John S.↗

A comparison using APPL and PVM for a parallel implementation of an unstructured grid generation program

Efforts to parallelize the VGRIDSG unstructured surface grid generation program are described. The inherent parallel nature of the grid generation algorithm used in VGRIDSG was exploited on a cluster of Silicon Graphics IRIS 4D workstations using the message passing libraries Application Portable Parallel Library (APPL) and Parallel Virtual Machine (PVM). Comparisons of speed up are presented for generating the surface grid of a unit cube and a Mach 3.0 High Speed Civil Transport. It was concluded that for this application, both APPL and PVM give approximately the same performance, however, APPL is easier to use.

Arthur, Trey↗

Jovian large-scale stratospheric circulation

An attempt is made to diagnose the annual-average mean meridional residual Jovian large-scale stratospheric circulation from observations of the temperature and reflected sunlight that reveal the morphology of the aerosol heating. The annual mean solar heating, total radiative flux divergence, mass stream function, and Eliassen-Palm flux divergence are shown. The stratospheric radiative flux divergence is dominated the high latitudes by aerosol absorption. Between the 270 and 100 mbar pressure levels, where there is no aerosol heating in the model, the structure of the circulation at low- to midlatitudes is governed by the meridional variation of infrared cooling in association with the variation of zonal mean temperatures observed by IRIS. The principal features of the vertical velocity profile found by Gierasch et al. (1986) are recovered in the present calculation.

West, R. A.↗

Adaptive fuzzy leader clustering of complex data sets in pattern recognition

A modular, unsupervised neural network architecture for clustering and classification of complex data sets is presented. The adaptive fuzzy leader clustering (AFLC) architecture is a hybrid neural-fuzzy system that learns on-line in a stable and efficient manner. The initial classification is performed in two stages: a simple competitive stage and a distance metric comparison stage. The cluster prototypes are then incrementally updated by relocating the centroid positions from fuzzy C-means system equations for the centroids and the membership values. The AFLC algorithm is applied to the Anderson Iris data and laser-luminescent fingerprint image data. It is concluded that the AFLC algorithm successfully classifies features extracted from real data, discrete or continuous.

Newton, Scott C.↗

Programs To Optimize Spacecraft And Aircraft Trajectories

POST/6D POST is set of two computer programs providing ability to target and optimize trajectories of powered or unpowered spacecraft or aircraft operating at or near rotating planet. POST treats point-mass, three-degree-of-freedom case. 6D POST treats more-general rigid-body, six-degree-of-freedom (with point masses) case. Used to solve variety of performance, guidance, and flight-control problems for atmospheric and orbital vehicles. Applications include computation of performance or capability of vehicle in ascent, or orbit, and during entry into atmosphere, simulation and analysis of guidance and flight-control systems, dispersion-type analyses and analyses of loads, general-purpose six-degree-of-freedom simulation of controlled and uncontrolled vehicles, and validation of performance in six degrees of freedom. Written in FORTRAN 77 and C language. Two machine versions available: one for SUN-series computers running SunOS(TM) (LAR-14871) and one for Silicon Graphics IRIS computers running IRIX(TM) operating system (LAR-14869).

Brauer, G. L.↗