Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Genetic Algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evolutionary inverse design of defects at graphene 2D lateral interfaces

Grain boundaries (GBs) in two-dimensional (2D) materials often have a profound impact on various material properties from mechanical to optical to electronic, yet predicting all possible GB formations is a challenge. Here, we introduce a workflow based on an evolutionary algorithm for exploring possible GBs formed at a lateral 2D interface. In a departure from conventional genetic algorithm based structure optimization methods, we perform genetic operations in the near interface region that allow us to be computationally efficient. We benchmark our method using graphene, which is a well-studied 2D material with a wide range of point defects. An empirical potential was used as the surrogate of the evolutionary search. More than 11.5 × 106 structures in total were evaluated for 128 GB orientations, and for each orientation, the ten best structures are recorded. A subset of low energy GBs predicted by empirical potential based search was relaxed by first-principles calculations and used to validate the energetic rank order. With the validated formation energy, we rank-ordered the best 128 GB structures and performed a detailed statistical analysis of primitive rings to find the correlation between the ring distribution and the formation energy. We found that for low energy GBs (below 0.5eV/Å), Stone–Wales defects will dominate, while structures with a higher energy (0.5–1.1eV/Å) show an increasing population of heptagons and nine-membered rings to form seven-nine defect pairs. For structures with energy higher than 1.1eV/Å, the percentage of octagons and nine-membered rings increases, which indicates that these two types of rings are not energetically favorable. Our proposed methodology is broadly applicable to explore defective low dimensional materials and represents a powerful tool that enables a systematic search of GBs of lateral interfaces for 2D materials.

Zhang, Jianan↗
DOE OSTI2015

Structures of 38-atom gold-platinum nanoalloy clusters

Bimetallic nanoclusters, such as gold-platinum nanoclusters, are nanomaterials promising wide range of applications. We perform a numerical study of 38-atom gold-platinum nanoalloy clusters, Au{sub n}Pt{sub 38−n} (0 ≤ n ≤ 38), to elucidate the geometrical structures of these clusters. The lowest-energy structures of these bimetallic nanoclusters at the semi-empirical level are obtained via a global-minimum search algorithm known as parallel tempering multi-canonical basin hopping plus genetic algorithm (PTMBHGA), in which empirical Gupta many-body potential is used to describe the inter-atomic interactions among the constituent atoms. The structures of gold-platinum nanoalloy clusters are predicted to be core-shell segregated nanoclusters. Gold atoms are observed to preferentially occupy the surface of the clusters, while platinum atoms tend to occupy the core due to the slightly smaller atomic radius of platinum as compared to gold’s. The evolution of the geometrical structure of 38-atom Au-Pt clusters displays striking similarity with that of 38-atom Au-Cu nanoalloy clusters as reported in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2011

Improve Data Mining and Knowledge Discovery Through the Use of MatLab

Data mining is widely used to mine business, engineering, and scientific data. Data mining uses pattern based queries, searches, or other analyses of one or more electronic databases/datasets in order to discover or locate a predictive pattern or anomaly indicative of system failure, criminal or terrorist activity, etc. There are various algorithms, techniques and methods used to mine data; including neural networks, genetic algorithms, decision trees, nearest neighbor method, rule induction association analysis, slice and dice, segmentation, and clustering. These algorithms, techniques and methods used to detect patterns in a dataset, have been used in the development of numerous open source and commercially available products and technology for data mining. Data mining is best realized when latent information in a large quantity of data stored is discovered. No one technique solves all data mining problems; challenges are to select algorithms or methods appropriate to strengthen data/text mining and trending within given datasets. In recent years, throughout industry, academia and government agencies, thousands of data systems have been designed and tailored to serve specific engineering and business needs. Many of these systems use databases with relational algebra and structured query language to categorize and retrieve data. In these systems, data analyses are limited and require prior explicit knowledge of metadata and database relations; lacking exploratory data mining and discoveries of latent information. This presentation introduces MatLab(R) (MATrix LABoratory), an engineering and scientific data analyses tool to perform data mining. MatLab was originally intended to perform purely numerical calculations (a glorified calculator). Now, in addition to having hundreds of mathematical functions, it is a programming language with hundreds built in standard functions and numerous available toolboxes. MatLab's ease of data processing, visualization and its enormous availability of built in functionalities and toolboxes make it suitable to perform numerical computations and simulations as well as a data mining tool. Engineers and scientists can take advantage of the readily available functions/toolboxes to gain wider insight in their perspective data mining experiments.

Shaykhian, Gholam Ali↗
NASA NTRS2011

Improve Data Mining and Knowledge Discovery through the use of MatLab

Data mining is widely used to mine business, engineering, and scientific data. Data mining uses pattern based queries, searches, or other analyses of one or more electronic databases/datasets in order to discover or locate a predictive pattern or anomaly indicative of system failure, criminal or terrorist activity, etc. There are various algorithms, techniques and methods used to mine data; including neural networks, genetic algorithms, decision trees, nearest neighbor method, rule induction association analysis, slice and dice, segmentation, and clustering. These algorithms, techniques and methods used to detect patterns in a dataset, have been used in the development of numerous open source and commercially available products and technology for data mining. Data mining is best realized when latent information in a large quantity of data stored is discovered. No one technique solves all data mining problems; challenges are to select algorithms or methods appropriate to strengthen data/text mining and trending within given datasets. In recent years, throughout industry, academia and government agencies, thousands of data systems have been designed and tailored to serve specific engineering and business needs. Many of these systems use databases with relational algebra and structured query language to categorize and retrieve data. In these systems, data analyses are limited and require prior explicit knowledge of metadata and database relations; lacking exploratory data mining and discoveries of latent information. This presentation introduces MatLab(TradeMark)(MATrix LABoratory), an engineering and scientific data analyses tool to perform data mining. MatLab was originally intended to perform purely numerical calculations (a glorified calculator). Now, in addition to having hundreds of mathematical functions, it is a programming language with hundreds built in standard functions and numerous available toolboxes. MatLab's ease of data processing, visualization and its enormous availability of built in functionalities and toolboxes make it suitable to perform numerical computations and simulations as well as a data mining tool. Engineers and scientists can take advantage of the readily available functions/toolboxes to gain wider insight in their perspective data mining experiments.

Shaykahian, Gholan Ali↗
DOE OSTI2016

Machine learning strategy for accelerated design of polymer dielectrics

The ability to efficiently design new and advanced dielectric polymers is hampered by the lack of sufficient, reliable data on wide polymer chemical spaces, and the difficulty of generating such data given time and computational/experimental constraints. Here, we address the issue of accelerating polymer dielectrics design by extracting learning models from data generated by accurate state-of-the-art first principles computations for polymers occupying an important part of the chemical subspace. The polymers are ‘fingerprinted’ as simple, easily attainable numerical representations, which are mapped to the properties of interest using a machine learning algorithm to develop an on-demand property prediction model. Further, a genetic algorithm is utilised to optimise polymer constituent blocks in an evolutionary manner, thus directly leading to the design of polymers with given target properties. Furthermore, while this philosophy of learning to make instant predictions and design is demonstrated here for the example of polymer dielectrics, it is equally applicable to other classes of materials as well.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Ground-state structures of Hafnium clusters

Hafnium (Hf) is a very large tetra-valence d-block element which is able to form relatively long covalent bond. Researchers are interested to search for substitution to silicon in the semi-conductor industry. We attempt to obtain the ground-state structures of small Hf clusters at both empirical and density-functional theory (DFT) levels. For calculations at the empirical level, charge-optimized many-body functional potential (COMB) is used. The lowest-energy structures are obtained via a novel global-minimum search algorithm known as parallel tempering Monte-Carlo Basin-Hopping and Genetic Algorithm (PTMBHGA). The virtue of using COMB potential for Hf cluster calculation lies in the fact that by including the charge optimization at the valence shells, we can encourage the formation of proper bond hybridization, and thus getting the correct bond order. The obtained structures are further optimized using DFT to ensure a close proximity to the ground-state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1996

From Competence to Efficiency: A Tale of GA Progress

Genetic algorithms (GAs) - search procedures based on the mechanics of natural selection and genetics - have grown in popularity for the solution of difficult optimization problems. Concomitant with this growth has been a rising cacaphony of complaint asserting that too much time must be spent by the GA practitioner diddling with codes, operators, and GA parameters; and even then these GA cassandras continue, and the user is still unsure that the effort will meet with success. At the same time, there has been a rising interest in GA theory by a growing community - a theorocracy - of mathematicians and theoretical computer scientists, and these individuals have turned their efforts increasingly toward elegant abstract theorems and proofs that seem to the practitioner to offer little in the way of answers for GA design or practice. What both groups seem to have missed is the largely unheralded 1993 assembly of integrated, applicable theory and its experimental confirmation. This theory has done two key things. First, it has predicted that simple GAs are severely limited in the difficulty of problems they can solve, and these limitations have been confirmed experimentally. Second, it has shown the path to circumventing these limitations in nontraditional GA designs such as the fast messy GA. This talk surveys the history, methodology, and accomplishment of the 1993 applicable theory revolution. After arguing that these accomplishments open the door to universal GA competence, the paper shifts the discussion to the possibility of universal GA efficiency in the utilization of time and real estate through effective parallelization, temporal decomposition, hybridization, and relaxed function evaluation. The presentation concludes by suggesting that these research directions are quickly taking us to a golden age of adaptation.

Goldberg, David E.↗
DOE OSTI2022

Optimal Power Dispatch of DGs in Radial and Mesh AC Grids: A Hybrid Solution Methodology between the Salps Swarm Algorithm and Successive Approximation Power Flow Method

In this paper, we address the problem of the optimal power dispatch of Distributed Generators (DGs) in Alternating Current (AC) networks, better known as the Optimal Power Flow (OPF) problem. We used, as the objective function, the minimization of power losses (P loss ) associated with energy transport, which are subject to the set of constraints that compose AC networks in an environment of distributed generation. To validate the effectiveness of the proposed methodology in solving the OPF problem in any network topology, we employed one 10-node mesh test system and three radial text systems: 10, 33, and 69 nodes. In each test system, DGs were allowed to inject 20%, 40%, and 60% of the power supplied by the slack generator in the base case. To solve the OPF problem, we used a master–slave methodology that integrates the optimization method Salps Swarm Algorithm (SSA) and the load flow technique based on the Successive Approximation (SA) method. Moreover, for comparison purposes, we employed some of the algorithms reported in the specialized literature to solve the OPF problem (the continuous genetic algorithm, the particle swarm optimization algorithm, the black hole algorithm, the antlion optimization algorithm, and the Multi-Verse Optimizer algorithm), which were selected because of their excellent results in solving such problems. The results obtained by the proposed solution methodology demonstrate its superiority and convergence capacity in terms of minimization of P loss in both radial and mesh systems. It provided the best reduction in minimum P loss in short processing times and showed excellent repeatability in each test system and scenario under analysis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRSDate not supplied

Robust Trajectory Optimization for Guided Powered Descent and Landing

A robust trajectory optimization approach for guidance algorithm gain selection for powered descent and landing is developed. This approach uses a genetic algorithm to determine optimal guidance algorithm parameters while incorporating uncertainty information from linear covariance analysis. The optimal guidance algorithm parameters are determined while accounting for environment, navigation, and vehicle property uncertainty and sensor suite fidelity. As a demonstration of this method, the optimal gains for the fractional polynomial powered descent guidance are found for the braking phase of a robotic lunar landing mission. Scenarios with differing sensor suites and sensor qualities are considered, with objective functions to minimize variability in propellant usage or terminal position. Results show that the optimal guidance algorithm gains for a given trajectory differ based on the sensor suite, and optimal guidance algorithm gains may result in up to 20% performance improvements over the baseline in propellant usage and landed accuracy.

Grace E Calkins↗
DOE OSTI2020

Algorithms in Diffraction Profile Analysis

This chapter introduces several approaches to crystallographic structure refinement from diffraction profile data including the Rietveld method, global optimization methods, and Bayesian modeling. First, the Rietveld method and related nonlinear least squares approaches to analyzing diffraction profiles are briefly discussed. We then review the most common algorithms within global optimization as alternative methods of structure solution: grid search, simulated annealing, and genetic algorithms. As the Rietveld method is the standard tool for analyzing diffraction profile data, we catalogue its challenges and limitations. A Bayesian approach to diffraction profile analysis is presented as an alternative, along with several sampling algorithms including Gibbs sampling, variants of Metropolis sampling, Hamiltonian Monte Carlo, and approximate Bayesian computing. These sampling algorithms are applied to the fitting of a neutron diffraction profile from a National Institute of Standards and Technology silicon standard reference material, and their results are compared.

Singh, Susheela↗
NASA NTRSDate not supplied

Machine Learning for Dynamic Test Sensor Placement

There are multiple different algorithms to perform modal test sensor placement optimization: effective independence, residual kinetic energy, iterative Guyan reduction, genetic algorithms, or a brute-force methodology. However, any of these methods may be computationally expensive, especially for structural models with a large number of degrees of freedom. Given the high-cost and the need to optimize the solution, modal sensor placement is a great application for machine learning (ML) algorithms. In this paper, we will apply ML algorithms to determine the optimal sensor locations for simple and complex structures. We will also discuss the benefits and drawbacks of using machine learning over other sensor placement algorithms.

Kelsey Buckles↗
NASA NTRS1993

Genetic learning in rule-based and neural systems

The design of neural networks and fuzzy systems can involve complex, nonlinear, and ill-conditioned optimization problems. Often, traditional optimization schemes are inadequate or inapplicable for such tasks. Genetic Algorithms (GA's) are a class of optimization procedures whose mechanics are based on those of natural genetics. Mathematical arguments show how GAs bring substantial computational leverage to search problems, without requiring the mathematical characteristics often necessary for traditional optimization schemes (e.g., modality, continuity, availability of derivative information, etc.). GA's have proven effective in a variety of search tasks that arise in neural networks and fuzzy systems. This presentation begins by introducing the mechanism and theoretical underpinnings of GA's. GA's are then related to a class of rule-based machine learning systems called learning classifier systems (LCS's). An LCS implements a low-level production-system that uses a GA as its primary rule discovery mechanism. This presentation illustrates how, despite its rule-based framework, an LCS can be thought of as a competitive neural network. Neural network simulator code for an LCS is presented. In this context, the GA is doing more than optimizing and objective function. It is searching for an ecology of hidden nodes with limited connectivity. The GA attempts to evolve this ecology such that effective neural network performance results. The GA is particularly well adapted to this task, given its naturally-inspired basis. The LCS/neural network analogy extends itself to other, more traditional neural networks. Conclusions to the presentation discuss the implications of using GA's in ecological search problems that arise in neural and fuzzy systems.

Smith, Robert E.↗
NASA NTRS2004

A Comparison of Techniques for Scheduling Earth-Observing Satellites

Scheduling observations by coordinated fleets of Earth Observing Satellites (EOS) involves large search spaces, complex constraints and poorly understood bottlenecks, conditions where evolutionary and related algorithms are often effective. However, there are many such algorithms and the best one to use is not clear. Here we compare multiple variants of the genetic algorithm: stochastic hill climbing, simulated annealing, squeaky wheel optimization and iterated sampling on ten realistically-sized EOS scheduling problems. Schedules are represented by a permutation (non-temperal ordering) of the observation requests. A simple deterministic scheduler assigns times and resources to each observation request in the order indicated by the permutation, discarding those that violate the constraints created by previously scheduled observations. Simulated annealing performs best. Random mutation outperform a more 'intelligent' mutator. Furthermore, the best mutator, by a small margin, was a novel approach we call temperature dependent random sampling that makes large changes in the early stages of evolution and smaller changes towards the end of search.

Globus, Al↗
DOE OSTI2014

Dynamic Optimized Advanced Scheduling of Bandwidth Demands for Large-Scale Science Applications (Final Report)

In this project, developed scheduling frameworks for dynamic bandwidth demands for large-scale science applications. In particular, we developed scheduling algorithms for dynamic bandwidth demands in this project. Apart from theoretical approaches such as Integer Linear Programming, Tabu Search and Genetic Algorithm heuristics, we have utilized practical data from ESnet OSCARS project (from our DOE lab partners) to conduct realistic simulations of our approaches. We have disseminated our work through conference paper presentations and journal papers and a book chapter. In this project we addressed the problem of scheduling of lightpaths over optical wavelength division multiplexed (WDM) networks. We published several conference papers and journal papers on this topic. We also addressed the problems of joint allocation of computing, storage and networking resources in Grid/Cloud networks and proposed energy-efficient mechanisms for operation optical WDM networks.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Generative AI for design of nanoporous materials: review and future prospects

Generative artificial intelligence (AI) is emerging as a powerful tool for advancing the design of nanoporous materials such as metal–organic frameworks, covalent–organic frameworks, and zeolites. These materials have potential application in important areas such as carbon capture, catalysis, gas storage, chemical separation, and drug delivery due to their modular, tunable structures, and their performance in these areas depends on precise control over their structure, chemical functionalities, and properties. Herein, we provide a review of generative AI algorithms that are emerging as powerful tools for the design of nanoporous materials, namely generative adversarial networks, variational autoencoders, diffusion models, genetic algorithms, reinforcement learning, and large language models. Some models are particularly good at generating diverse and high-quality designs, while others excel at exploring large design spaces or optimizing materials with desired properties. Certain algorithms also allow for efficient transitions between different designs, and some offer versatility in generating materials based on textual input. We discuss the advantages, limitations, and applications of these algorithms in porous material design and emphasize the future potential of integrating AI with experimental workflows to accelerate the development and validation of AI-generated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

RANGE: A robust adaptive nature-inspired global explorer of potential energy surfaces

With the growing demand for realistic representations of chemical structures and the advent of exascale computing, the intelligent sampling of potential energy surfaces and efficient identification of global minima have become more essential but also more feasible. Building on prior studies demonstrating the efficiency of the Artificial Bee Colony (ABC) swarm intelligence algorithm, we report a hybrid metaheuristic framework that integrates the adaptive exploration capabilities of ABC coupled with the exploitation strengths of genetic algorithms (GA) in a scalable, Python-based implementation. The resulting tool, RANGE (Robust Adaptive Nature-inspired Global Explorer), provides seamless interfaces to multiple potential energy evaluators, either directly or via widely used Python libraries, and is designed for high-performance computing environments. We describe the implementation details of RANGE and evaluate its performance, relative to ABC- or GA-alone based algorithms, on a variety of chemical systems, including molecular clusters and heterogeneous surfaces. In conclusion, our results demonstrate RANGE’s efficiency, robustness, and broad applicability in addressing challenging global optimization problems in computational chemistry and materials science.

Algorithms and data structure↗
DOE OSTI2015

Ion-Stockmayer clusters: Minima, classical thermodynamics, and variational ground state estimates of Li{sup +}(CH{sub 3}NO{sub 2}){sub n} (n = 1–20)

Structural optimizations, classical NVT ensemble, and variational Monte Carlo simulations of ion Stockmayer clusters parameterized to approximate the Li{sup +}(CH{sub 3}NO{sub 2}){sub n} (n = 1–20) systems are performed. The Metropolis algorithm enhanced by the parallel tempering strategy is used to measure internal energies and heat capacities, and a parallel version of the genetic algorithm is employed to obtain the most important minima. The first solvation sheath is octahedral and this feature remains the dominant theme in the structure of clusters with n ≥ 6. The first “magic number” is identified using the adiabatic solvent dissociation energy, and it marks the completion of the second solvation layer for the lithium ion-nitromethane clusters. It corresponds to the n = 18 system, a solvated ion with the first sheath having octahedral symmetry, weakly bound to an eight-membered and a four-membered ring crowning a vertex of the octahedron. Variational Monte Carlo estimates of the adiabatic solvent dissociation energy reveal that quantum effects further enhance the stability of the n = 18 system relative to its neighbors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

On Efficient Deployment of Wireless Sensors for Coverage and Connectivity in Constrained 3D Space

Sensor networks have been used in a rapidly increasing number of applications in many fields. This work generalizes a sensor deployment problem to place a minimum set of wireless sensors at candidate locations in constrained 3D space to k-cover a given set of target objects. By exhausting the combinations of discreteness/continuousness constraints on either sensor locations or target objects, we formulate four classes of sensor deployment problems in 3D space: deploy sensors at Discrete/Continuous Locations (D/CL) to cover Discrete/Continuous Targets (D/CT). We begin with the design of an approximate algorithm for DLDT and then reduce DLCT, CLDT, and CLCT to DLDT by discretizing continuous sensor locations or target objects into a set of divisions without sacrificing sensing precision. Furthermore, we consider a connected version of each problem where the deployed sensors must form a connected network, and design an approximation algorithm to minimize the number of deployed sensors with connectivity guarantee. For performance comparison, we design and implement an optimal solution and a genetic algorithm (GA)-based approach. Extensive simulation results show that the proposed deployment algorithms consistently outperform the GA-based heuristic and achieve a close-to-optimal performance in small-scale problem instances and a significantly superior overall performance than the theoretical upper bound.

47 OTHER INSTRUMENTATION↗