SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An effort to optimize gallium-doped germanium photoconductors (Ge:Ga) for use in space for sensitive detection of far infrared radiation in the 100 micron region is described as well as the development of cryogenic apparatus capable of calibrating detectors under low background conditions.
Candidate resin manufacturers and film producers were surveyed to determine the availability of key materials and to establish the capabilities of fabricators to prepare ultrathin films of these materials within the capacity/cost/time constraints of the Halley program. Infrared spectra of three candidate samples were obtained by pressing each sample against an internal reflection crystal with the polymer sandwiched between the crystal and the metal backing. The sample size was such that less than one-fourth of the surface of the crystal was covered with the sample. This resulted in weak spectra requiring a six-fold expansion. Internal reflection spectra of the three samples were obtained using both a KRS-5 and a Ge internal reflection crystal. Subtracted infrared spectra of the three samples are presented.
The feasibility of modifying the solar electric propulsion (SEP) 66 watt/kilogram, 12.5 kilowatt solar array blanket design to incorporate ultra-low mass blanket technology and to generate conceptual design data by modifying the SEP solar array design to 17.5kW power output was performed. Five modified designs were developed, which substituted present SEP solar array design components with one or more of 50 micron thick solar cells, 75 micron cell coverglasses, and a different blanket substrate developed by GE. A parametric analysis was performed to determine the solar array mast least weight and blanket tension required to maintain a minimum natural frequency of 0.04 Hz. The solar array wing assembly weights and power outputs were calculated, and preliminary cost estimates for flight hardware development, fabrication and qualification were made for each case studied.
The Raman scattering furnace for investigating vapor transport mechanisms was completed and checked out. Preliminary experiments demonstate that a temperature resolution of plus and minus 5 C is possible with this system operating in a backscatter mode. In the experiments presented with the GeI 4 plus excess Ge system at temperatures up to 600 C, only the GeI4 band at 150 cm superscript minus 1 was observed. Further experiments are in progress to determine if GeI2 does become the major vapor species above 440 C.
A description is given of current technology for fabricating single AMOS (antireflection-coated metal oxide semiconductor) solar cells, with attention given to thermal, plasma, and anodic oxidation, native oxide stripping, and X-ray photoelectron spectroscopy results. Some preliminary results are presented on the chemistry and electrical characterization of such cells, and the characteristics of cells fabricated on sliced polycrystalline GaAs wafers are examined. Consideration is also given to the recrystallization of evaporated Ge films for use as low-cost substrates for polycrystalline GaAs solar cells.
A balloon-borne large volume high resolution gamma-ray spectrometer which utilizes 40 cu cm Ge(Li) crystals was used June 10, 1974 to search for a 400-keV gamma-ray line from the Crab Nebula. Energy loss spectra in the 400-keV vicinity are compared with gamma-ray measurements of the same source which were reported by Leventhal et al. (1977). In contrast with the 1976 experimental results reported by Leventhal et al., a 400-keV line was not observed. Further, it is thought that the 1974 data contradict the measurement reported by Leventhal et al. if a constant source intensity is assumed.
The paper analyzes the meteoritic material at five multikilometer craters: Clearwater (Lac a l'Eau Claire) East and West (22 and 32 km), Manicouagan (70 km) and Mistastin (28 km), all in Canada; and Lake Bosumtwi (10.5 km), Ghana, which is associated with Ivory Coast tektites. Radiochemical neutron activation analysis is applied to 16 crater samples for the siderophile trace elements Ir, Os, Pd, Ni, Ge, and Re, which are depleted to varying degrees in the earth's crust but are abundant in all meteorites except achondrites. It is found that only two samples, both from Clearwater, exhibit a strong meteoritic signal. The remaining ones fall within or slightly above the range for terrestrial rocks, and therefore at best contain only small meteoritic components. Clearwater East is the first terrestrial impact crater to be associated with a stony meteorite (a C1 or C2 chondrite).
The fabrication and optimization of composite submillimeter wave bolometers with metal film absorbing elements and doped Ge thermometers are described. Performance characteristics are given for 4 x 4-mm bolometers designed for operation at both He-4 and He-3 temperatures. The performance expected from such bolometers when they are optimized for various values of background loading is calculated. Current dependent noise, which can arise from any of several sources, is included in the analysis. This can make it impossible to reach the background fluctuation noise limit. Feed structures for these bolometers which employ Winston light concentrators are described.
A new class of room-temperature infrared detectors has been developed through use of metal-insulator-semiconductor (MIS) or metal-insulator-semiconductor-insulator-metal (MISIM) slabs. The detectors, which have been fabricated from Si, Ge and GaAs, rely for operation on the electrical capacitance variations induced by modulated incident radiation. The peak detectivity for a 1000-A Si MISIM detector is comparable to that of a conventional Si detector functioning in the photovoltaic mode. Optimization of the photocapacitive-mode detection sensitivity is discussed.
In the reported studies of meteoritic material on the moon an attempt was made to characterize the nature of the projectile from the abundance pattern of certain diagnostic trace elements, such as Ir, Re, Ni, Au, Ge, Sb, and Bi. Analyses were conducted of 47 samples from 4 terrestrial meteorite craters. The main object in the investigation was to show that the nature of the projectile could be reliably inferred from the trace-element pattern of the ejecta. In this connection material was analyzed from two terrestrial craters where the projectile itself was known. A second objective was to characterize the projectile at two craters where no discrete meteoritic fragments had been found.
Zn, Ge, Cd, In, and Au have been detected in surficial deposits on Apollo 15 green-glass spherules, and it is suggested that these deposits are condensates from the magmatic gas phase which was responsible for the pneumatic expulsion of the green glass from the lunar interior. Thermodynamic data indicate that chlorides and fluorides were the dominant forms of the volatile metals. The Ar-40x content of a nongreen-glass soil fraction is greater than that found in green-glass. Mare and low-K Fra Mauro basalts seem to be the most prominent components of Apollo 15 soil. The correlation of Zn with Ar-40x and with Pb-204 is studied, and the distribution of quartz-normative and olivine-normative basalts is considered.
Simultaneous doping with Ge and Zn improves degradation resistance of short-wavelength (AlGa)As lasers. Method opens up prospects for greatly increased reliability in lasers and LED's operating at 7,500 angstroms or below.
Ge film that replaces SiO2 coating in method of fabricating room-temperature CW laser diodes achieves greater heat dissipation while maintaining effectiveness as current-confining medium. Film also lessens certain unwanted strain parameters and ultimately increases lifetime of lasers. Method is applicable to fabrication of InP and (AlGa)As CW lasers.
Low-Series-resistance ohmic contact to p-type InP semiconductor material is achieved in technique utilizing Au-Ge-Zn eutectic alloy. Alloy sets and adheres well to semiconductor surface with higher acceptor concentration at metal semiconductor interface. Technique has provided satisfactory for pn junction LED's and lasers.
Two aircraft were evaluated, using a derated TF34-GE-100 turbofan engine one with laminar flow control (LFC) and one without. The mission of the remotely piloted vehicles (RPV) is one of high-altitude loiter at maximum endurance. With the LFC system maximum mission time increased by 6.7 percent, L/D in the loiter phase improved 14.2 percent, and the minimum parasite drag of the wing was reduced by 65 percent resulting in a 37 percent reduction for the total airplane. Except for the minimum parasite drag of the wing, the preceding benefits include the offsetting effects of weight increase, suction power requirements, and drag of the wing-mounted suction pods. In a supplementary study using a scaled-down, rather than derated, version of the engine, on the LFC configuration, a 17.6 percent increase in mission time over the airplane without LFC and an incremental time increase of 10.2 percent over the LFC airplane with derated engine were attained. This improvement was due principally to reductions in both weight and drag of the scaled engine.
The results are reported of an investigation into the synthesis and properties of high temperature superconducting materials. A chemical vapor deposition apparatus was designed and built which is suitable for the preparation of multicomponent metal films This apparatus was used to prepare a series of high T sub c A-15 structure superconducting films in the binary system Nb-Ge. The effect on T sub c of a variety of substrate materials was investigated. An extensive series of ternary alloys were also prepared. Conditions allowing the brittle high T sub c (approximately 18 K) A-15 structure superconductor Nb3A1 to be prepared in a low T sub c but ductile form were found. Some of the ways that the ductile (bcc) form can be cold worked or machined are described. Measurements of rate of transformation of cold worked bcc material to the high T sub c A-15 structure with low temperature annealing are given. Preliminary measurements indicate that this material has attractive high field critical current densities.
GaAs chemical vapor deposition (CVD) growth on single-crystal GaAs substrates was investigated over a temperature range of 600 to 750 C, As/GA mole-ratio range of 3 to 11, and gas molefraction range 5 x 10 to the minus 9th power to 7x 10 to the minus 7th power for H2S doping. GasAs CVD growth on recrystallized Ge films was investigated for a temperature range of 550 to 700 C, an As/GA mole ratio of 5, and for various H2S mole fraction. The highest efficiency cell observed on these films with 2 mm dots was 4.8% (8% when AR-coated). Improvements in fill factor and opencircuit voltage by about 40% each are required in order to obtain efficiencies of 15% or greater.
Long-time rinsings of the Z6040-methlycellulose coating used successfully on the ASTP MA=011 experiment indicate the permanency of this coating is inadequate for continuous flowing systems. Two approaches are described for developing coatings which are stable under continuous fluid movement and which exhibit finite and predictable electroosmotic mobility values while being effective on different types of surfaces, such as glass, plastics, and ceramic alumina, such as is currently used as the electrophoresis channel in the GE-SPAR-CPE apparatus. The surface charge modification of polystyrene latex, especially by protein absorption, to be used as model materials for ground-based electrophoresis experiments, and the preliminary work directed towards the seeded polymerization of large-particle-size monodisperse latexes in a microgravity environment are discussed.