Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GaSe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

MiniCarb: a passive, occultation-viewing, 6U CubeSat for observations of CO 2 , CH 4 , and H 2 O

In this report we present the final design, environmental testing, and launch history of MiniCarb, a 6U CubeSat developed through a partnership between NASA Goddard Space Flight Center and Lawrence Livermore National Laboratory. MiniCarb’s science payload, developed at Goddard, was an occultation-viewing, passive laser heterodyne radiometer for observing methane, carbon dioxide, and water vapor in Earth’s atmosphere at ~1.6 µm s -1 . MiniCarb’s satellite, developed at Livermore, implemented their CubeSat Next Generation Bus plug-and-play architecture to produce a modular platform that could be tailored to a range of science payloads. Following the launch on 5 December 2019, MiniCarb traveled to the International Space Station and was set into orbit on 1 February 2020 via Northrop Grumman’s Cygnus capsule which deployed MiniCarb with tipoff rotation of about 20° s (significantly higher than the typical rate of 3° s -1 from prior CubeSats), from which the attitude control system was unable to recover resulting in a loss of power. In spite of this early failure, MiniCarb had many successes including rigorous environmental testing, successful deployment of its solar panels, and a successful test of the radio and communication through the Iridium network. This prior work and enticing cost (approximately $\$2$ M for the satellite and $\$$250 K for the payload) makes MiniCarb an ideal candidate for a low-cost and rapid rebuild as a single orbiter or constellation to globally observe key greenhouse gases.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

BCS-BEC crossover of the strongly interacting 6 Li − 40 K mixture

Here, we present quantum Monte Carlo calculations of the properties of a two-component mass-imbalanced Fermi gas, corresponding to the 6 Li − 40 K mixture. We compute the equation of state of the unpolarized system as a function of the scattering length with particular attention paid to the unitary limit, where the effect of the effective range of the interaction is explored. In order to investigate differences from the equal-mass case we also compute the pair-distribution function and the momentum distribution over a range of interaction strengths, which can provide information about the structure of the system. Finally, we compute the heavy-light quasiparticle spectrum for the full crossover regime. Our theoretical predictions, based on quantum Monte Carlo calculations, should inform future theoretical studies and can be tested by experiments with ultracold fermionic gases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Quench dynamics of two-component dipolar fermions subject to a quasiperiodic potential

Motivated by recent experiments in fermionic polar gases, we study the nonequilibrium dynamics of two-component dipolar fermions subject to a quasiperiodic potential. We investigate the localization of charge and spin degrees of freedom time evolving with a long-range spin-SU(2) symmetric fermionic Hamiltonian by calculating experimentally accessible dynamical observables. To study the nonequilibrium dynamics, we start the time evolution with two initial states at half-filling: (i) product state with doublons |↑↓0↑↓0↑↓0↑↓0↑↓$\rangle$ and (ii) product state with singlons |↑↓↑↓↑↓↑↓↑↓$\rangle$. We carried out the real-time evolution via the fermionic Hamiltonian using exact diagonalization (ED) and the time-dependent variational principle (TDVP) for finite matrix product states (MPS), within experimentally relevant timescales. For the product state with doublons, we observe a delocalized to localized phase transition varying disorder strengths by monitoring the decay of charge imbalance with time. For the long-range interacting Hamiltonian of our focus, and in the presence of strong enough disorder, starting the time evolution with singlons we find a strong reduction in the spin delocalization, contrary to results of previous studies using the disordered short-range (on-site) Hubbard model with SU(2) symmetry. In addition to the quench dynamics, we also demonstrate the localization of charge and spin in the full energy spectrum of the long-range spin-SU(2) symmetric Hamiltonian by monitoring spin and charge autocorrelation functions. Finally, our predictions for localization of both charge and spin should be observable in ultracold experiments with fermionic dipolar atoms subject to a quasiperiodic potential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Simulations of classical three-body thermalization in one dimension

One-dimensional systems, such as nanowires or electrons moving along strong magnetic field lines, have peculiar thermalization physics. The binary collision of pointlike particles, typically the dominant process for reaching thermal equilibrium in higher-dimensional systems, cannot thermalize a 1D system. We study how dilute classical 1D gases thermalize through three-body collisions. We consider a system of identical classical point particles with pairwise repulsive inverse power-law potential V ij ∝ 1/|x i –x j | n or the pairwise Lennard-Jones potential. Using Monte Carlo methods, we compute a collision kernel and use it in the Boltzmann equation to evolve a perturbed thermal state with temperature T toward equilibrium. We explain the shape of the kernel and its dependence on the system parameters. Additionally, we implement molecular dynamics simulations of a many-body gas and show agreement with the Boltzmann evolution in the low-density limit. For the inverse power-law potential, the rate of thermalization is proportional to ρ 2 ⁢T$\frac{1}{2}$ – $\frac{1}{n}$, where ρ is the number density. Furthermore, the corresponding proportionality constant decreases with increasing n.

1-dimensional systems↗
DOE OSTI2021

Energy-Resolved Information Scrambling in Energy-Space Lattices

Here, weakly interacting Fermi gases simulate spin lattices in energy space, offering a rich platform for investigating information spreading and spin coherence in a large many-body quantum system. We show that the collective spin vector can be determined as a function of energy from the measured spin density, enabling general energy-space resolved protocols. We measure an out-of-time-order correlation function in this system and observe the energy dependence of the many-body coherence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Observation of Scale Invariance in Two-Dimensional Matter-Wave Townes Solitons

We report near-deterministic generation of two-dimensional (2D) matter-wave Townes solitons, and a precision test on scale invariance in attractive 2D Boses gases. We induce a shape-controlled modulational instability in an elongated 2D matter-wave to create an array of isolated solitary waves of various sizes and peak densities. We confirm scale invariance by observing the collapse of solitary-wave density profiles onto a single curve in a dimensionless coordinate rescaled according to their peak densities, and observe that the scale-invariant profiles measured at different coupling constants can further collapse onto the universal profile of Townes solitons. The reported scaling behavior is tested with a nearly 60-fold difference in soliton interaction energies, and allows us to discuss the impact of a non-negligible magnetic dipole-dipole interaction (MDDI) on 2D scale invariance. Here, we confirm that the effect of MDDI in our alkali cesium quasi-2D samples effectively conforms to the same scaling law governed by a contact interaction to well within our experiment uncertainty.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Thermalization of Interacting Quasi-One-Dimensional Systems

Many experimentally relevant systems are quasi-one-dimensional, consisting of nearly decoupled chains. In these systems, there is a natural separation of scales between the strong intrachain interactions and the weak interchain coupling. When the intrachain interactions are integrable, weak interchain couplings play a crucial part in thermalizing the system. Here, we develop a Boltzmann-equation formalism involving a collision integral that is asymptotically exact for any interacting integrable system, and apply it to develop a quantitative theory of relaxation in coupled Bose gases in the experimentally relevant Newton's cradle setup. Here we find that relaxation involves a broad spectrum of timescales. We provide evidence that the Markov process governing relaxation at late times is gapless; thus, the approach to equilibrium is generally nonexponential, even for spatially uniform perturbations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

The Impact of Oxidation-Induced Degradation On Materials Used in Hydrogen-Fired Microturbines

Hydrogen-fueled microturbines are being considered as part of the future green microgrid. However, the use of hydrogen as a fuel presents new challenges for selection and development of suitable high temperature materials for hydrogen combustion. The burning of hydrogen is expected to result in higher operating temperatures and higher than typically observed water vapor contents in exhaust gases versus burning natural gas. In the present work, foil specimens of various Fe- and Ni-based alloys were oxidized in air + 10 % H 2 O and air + 60% H 2 O for up to 5,000 h at 700 °C to simulate the exhaust atmosphere of natural gas and hydrogen-fueled microturbines. Here, the impact of alloy composition and water vapor content on the oxidation/ volatilization induced loss of wall thickness was experimentally evaluated. Enhanced external oxidation and volatilization of Cr 2 O 3 and Ti-doped Cr 2 O 3 scales was observed in air + 60% H 2 O compared to air + 10% H 2 O. No significant impact of the higher water vapor content was observed on Al 2 O 3 scales formed on Fe-based alumina forming alloys. Lifetime modeling was employed to predict the combined effects of water vapor content, gas flow rates, temperature and alloy composition on the oxidation-induced lifetime of the investigated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Constraining Bedrock Groundwater Residence Times in a Mountain System with Environmental Tracer Observations and Bayesian Uncertainty Quantification: Modeling and Data Package

Groundwater residence times provide fundamental descriptions of hydrologic dynamics and mixing processes in mountainous watersheds. Yet, few observational datasets that can constrain groundwater residence times over broad timescales are available in high elevation mountain systems. Here we present field observations from May 2021 of dissolved noble gases (He, Ne, Ar, Kr, and Xe), Chloroflourcarbons (CFCs), Sulfurhexaflouride (SF6), and tritium (3H) sampled from the Pumphouse Lower Montane study site (wells PLM1, PLM6, and PLM7) within the East River Watershed, Colorado. The presented noble gas (PLM_noblegas_2021.csv) and environmental tracer (PLM_tracers_2021.csv) observation datasets, along with the associated modeling scripts, aide in quantifying groundwater residence times and recharge conditions in a high elevation mountain system. Furthermore, the modeling scripts quantify groundwater residence time and noble gas recharge condition uncertainties using a novel Markov-chain Monte Carlo approach. All data modeling scripts are written in the Python code.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Data and Scripts associated with “Lambda-PFLOTRAN: Workflow for Incorporating Organic Matter Chemistry Informed by Ultra High Resolution Mass Spectrometry into Biogeochemical Modeling.”

This data package is associated with the publication “Lambda-PFLOTRAN: Workflow for Incorporating Organic Matter Chemistry Informed by Ultra High Resolution Mass Spectrometry into Biogeochemical Modeling” submitted to Geoscientific Model Development (Muller et al., 2024). In this manuscript, organic matter chemistry and thermodynamics are directly connected to reactive transport simulators through the newly developed Lambda-PFLOTRAN (Parallel Reactive Flow and Transport model) workflow tool that succinctly incorporates organic matter chemistry data generated from Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) into reaction networks to simulate aerobic respiration of the organic matter and the resulting biogeochemistry. Lambda-PFLOTRAN is a python-based workflow, executed through a Jupyter Notebook interface, that digests raw FTICR-MS data, develops a representative reaction network based on substrate-explicit thermodynamic modeling (also termed lambda modeling due to its key thermodynamic parameter λ used therein), and completes a biogeochemical simulation with the open source, reactive flow, and transport code PFLOTRAN. This data package contains Jupyter Notebook based workflows for two test cases for running biogeochemical simulations of organic matter oxidation identified by FTICR-MS. It contains four primary folders (workflow, data, src, and analysis), a file-level metadata file (Muller_2024_Lambda_PFLOTRAN_Manuscript_Data_Package_flmd.csv) that lists all the files contained in this data package with a short description of each, and a data dictionary (Muller_2024_Lambda_PFLOTRAN_Manuscript_Data_Package_dd.csv) file that describes the tabular column headers. The ‘workflow’ folder contains the Jupyter Notebook based workflows for running the lambda analysis, PFLOTRAN simulation, sensitivity analysis and parameter estimation. The ‘data’ folder contains the FTICR-MS data, initial conditions, and incubation data for test cases 1 and 2 in folders titled ‘WHONDRS’ and ‘Colloids’, respectively. The data folder also has a ‘Database’ folder containing a reaction network for bulk organic matter (assumed to be CH2O) and a general database for PFLOTRAN (hanford_rxn_network). The CH2O reaction network defines bulk organic matter oxidation. Biogeochemical simulations are completed for both the lambda binned organic matter and bulk organic matter reaction networks. The ‘hanford_rxn_network’ database includes information required for PFLTORAN simulations including ion size, molar mass, and charge of the aqueous species, gases, and minerals phases. The ‘src’ folder contains python source codes for performing lambda analysis, PFLOTRAN simulation, sensitivity analysis and parameter estimation. The ‘analysis’ folder contains outputs from the test cases 1 and 2 including lambda analysis, PFLOTRAN runs and the calibration results.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Plant Characteristics, Porewater, Gas Flux, and Soil Biogeochemistry at Council Road Site Mile Marker 71, Seward Peninsula, Alaska, 2023

Data collected at Council, AK (64°51’35.0”N 163°41’59.1”W) during a summer campaign in 2023. Water data consists of soil porewater collected by centrifuging soil cores and also by field collection with porewater samplers (rhizons). Gas data consists of CO2, CH4 and N2O surface soil fluxes measured with a portable FTIR analyzer. Plant and root data consists of biomass, root length, diameter and mass. Soil data consists of total C and N. Air, water and soil samples span two main locations: a thermokarst wetland and an upland tussock. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).This dataset was generated to broadly address the following research question: how will climate change (i.e., thawing permafrost, landscape change) alter the ecosystem flux (sink versus source) of important greenhouse gases such as CO2, CH4 and N2O?Description of the contents of this data package: This dataset contains 5 different individual .csv files containing plant, soil, water and gas data. No software is needed to utilize them. PFTCover: Plant functional type ground cover in 1x1 meter plots. SoilCores: Solidphase and porewater phase soil biogeochemical variablesPlantData: Above and belowground plant traits. GasFlux: Surface plant-soil gas measurementsFieldPorewater: Field collected porewater biogeochemical variables

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Conversion of CO 2 into Synthetic Graphite

Carbon Dioxide (CO 2 ) can be utilized as a source for producing synthetic graphite. Our method converts CO 2 into solid carbon. These CO 2 -sourced solid carbon have an anisotropic property that allow them to be graphitized into synthetic graphite. Our patented thermal catalytic process uses carbon dioxide and hydrogen as the feedstocks for the reaction, producing solid carbon material, with distilled water as the sole byproduct. The process is designed as a closed loop, where all feedstock gases entering the reactor are converted into durable bulk carbons and water, with no emissions. These carbons materials can be sintered into a solid structure and then thermally annealed, taking the carbon atoms from a disordered state to a highly ordered state of graphitic material – producing synthetic graphite structures. Phase 1 will prove that these bulk carbons can be sintered into a machinable solid carbon structure, which will then be annealed into a fully graphitic solid structure. Standard analytics will be done to verify the extent of graphitization (Raman, XRD). Proving this CO 2 -sourced carbon pathway to synthetic graphite structures will give the US a domestic supply route for this critical material and remove reliance on foreign sources. In addition, since the synthetic graphite structure is made from CO 2 -sourced carbon, this is also a method to mitigate CO 2 . Graphite structures are used in high temperature and high friction applications, for example, as anodes for steel refining, for brake pad linings, as neutron reflectors in nuclear reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Statistical Characterization of Temperature and Pressure Vertical Profiles for the Analysis of Laser Heterodyne Radiometry Data

The statistical analysis of historic pressure and temperature profiles from radiosonde launches for use in the fitting of molecular oxygen line shapes is presented. As the O 2 mixing ratio is nearly constant throughout the lower atmosphere, only variations in pressure and temperature profiles will affect the fit of observed O 2 features in Laser Heterodyne Radiometry (LHR) spectra. Radiosonde temperature and pressure data are extracted from the Integrated Global Radiosonde Archive (IGRA) for a given station, date, and launch time. Data may be extracted for a single launch, for the same date over several years, and/or within a window centered on a target date. The temperature and pressure profiles are further characterized by the statistical variation in coefficients of polynomial fits in altitude. The properties of the probability distributions for each coefficient are used to constrain fits of O 2 line shapes through Nelder–Mead optimization. The refined temperature and pressure profiles are then used in the retrieval of vertically resolved mixing ratios for greenhouse gases (GHGs) measured in the same instrument. In continuous collections, each vertical profile determination may be treated as a Bayesian prior to inform subsequent measurements and provide an estimate of uncertainties.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Pluto's Ultraviolet Spectrum, Surface Reflectance, and Airglow Emissions

During the New Horizons spacecraft’s encounter with Pluto, the Alice ultraviolet spectrograph conducted a series of observations that detected emissions from both the interplanetary medium (IPM) and Pluto. In the direction of Pluto, the IPM was found to be 133.4 ± 0.6 R at Lyα, 0.24 ± 0.02 R at Lyβ, and <0.10 R at He i 584 Å. We analyzed 3900 s of data obtained shortly before closest approach to Pluto and detect airglow emissions from H i, N i, N ii, N{sub 2}, and CO above the disk of Pluto. We find Pluto’s brightness at Lyα to be 29.3 ± 1.9 R, in good agreement with preencounter estimates. The detection of the N ii multiplet at 1085 Å marks the first direct detection of ions in Pluto’s atmosphere. We do not detect any emissions from noble gases and place a 3σ upper limit of 0.14 R on the brightness of the Ar i 1048 Å line. We compare preencounter model predictions and predictions from our own airglow model, based on atmospheric profiles derived from the solar occultation observed by New Horizons, to the observed brightness of Pluto’s airglow. Although completely opaque at Lyα, Pluto’s atmosphere is optically thin at wavelengths longer than 1425 Å. Consequently, a significant amount of solar far-UV light reaches the surface, where it can participate in space weathering processes. From the brightness of sunlight reflected from Pluto, we find the surface has a reflectance factor (I/F) of 17% between 1400 and 1850 Å. We also report the first detection of a C{sub 3} hydrocarbon molecule, methylacetylene, in absorption, at a column density of ∼5 × 10{sup 15} cm{sup −2}, corresponding to a column-integrated mixing ratio of 1.6 × 10{sup −6}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Aging of Concrete for the Evaluation of Repair Materials to Protect the Walls of the HCAEX Tunnel at Savannah River - 20301

H-Canyon, located in the Savannah River site, is a unique facility for chemical reprocessing of plutonium, highly-enriched uranium, and other radioactive materials. The exhaust gases of the H-Canyon are sent through the H-Canyon Exhaust (HCAEX) tunnel for contamination removal. Robotic inspections of the tunnel revealed significant degradation of the reinforced concrete structure that was associated with acid attack, and could compromise the structural stability of the tunnel. Thus, the identification and evaluation of potential repair materials that could be applied on the degraded walls to mitigate and prevent further degradation is of significant interest to the Department of Energy and the Savannah River representatives. This research effort has been divided into two phases: 1) Development and evaluation of aged concrete under accelerated aging conditions (which is the focus of this paper) and 2) Evaluation of potential repair materials applied on aged and non-aged concrete under simulated aggressive conditions. In order to develop and evaluate concrete samples exposed to accelerated aging conditions in simulated aggressive environments, a literature review of the HCAEX tunnel was conducted that included 1) characterization and extent of the concrete damage, 2) environmental conditions inside the tunnel and 3) primary deterioration mechanisms. In addition, potential coatings and/or repair materials for degraded concrete surfaces exposed to aggressive environments (primarily acidic) were selected from the literature review and the most common testing and measurements for evaluating acid attack phenomena, erosion, etc. were reviewed. From the literature review findings, a preliminary bench-scale test plan for the concrete aging was developed, including accelerated aging tests with aggressive conditions (acid fumes, humidity, etc.). Concrete samples were exposed to the aging accelerated conditions (e.g. immersion in acid solutions) and visual inspection, mass loss and pH change (acid solution) were recorded over time. Correlations between the visual inspection, mass loss and pH changes results and the aging time or the aging conditions were developed. Specimens submitted to the highest acid concentration showed the fastest and most intense degradation. The type of coarse aggregate (limestone) used for the concrete seemed to be the cause of the fastest aging observed, compared to the cement paste. The research findings created the foundation for the ongoing investigation, in which new concrete samples with a mix design similar to the HCAEX tunnel will be tested and will serve as the substrate for testing the selected coatings and /or repair materials. In this paper, the literature review and preliminary results from the aging tests are provided. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Near-Zero Power MOF-Based Sensors for NO 2 Detection

Detection and capture of toxic nitrogen oxides (NO x ) is important for emissions control of exhaust gases and general public health. The ability to directly electrically detect trace (0.5–5 ppm) NO 2 by a metal–organic framework (MOF)-74-based sensor at relatively low temperatures (50 °C) is demonstrated via changes in electrical properties of M-MOF-74, M = Co, Mg, Ni. The magnitude of the change is ordered Ni > Co > Mg and explained by each variant's NO 2 adsorption capacity and specific chemical interaction. Ni-MOF-74 provides the highest sensitivity to NO 2 ; a 725× decrease in resistance at 5 ppm NO2 and detection limit <0.5 ppm, levels relevant for industry and public health. Furthermore, the Ni-MOF-74-based sensor is selective to NO 2 over N 2 , SO 2 , and air. Linking this fundamental research with future technologies, the high impedance of MOF-74 enables applications requiring a near-zero power sensor or dosimeter, with the active material drawing <15 pW for a macroscale device 35 mm 2 with 0.8 mg MOF-74. Finally, this represents a 10 4 –10 6 × decrease in power consumption compared to other MOF sensors and demonstrates the potential for MOFs as active components for long-lived, near-zero power chemical sensors in smart industrial systems and the internet of things.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Bottom‐Up Synthesized Nanoporous Graphene Transistors

Abstract Nanoporous graphene (NPG) can exhibit a uniform electronic band gap and rationally‐engineered emergent electronic properties, promising for electronic devices such as field‐effect transistors (FETs), when synthesized with atomic precision. Bottom‐up, on‐surface synthetic approaches developed for graphene nanoribbons (GNRs) now provide the necessary atomic precision in NPG formation to access these desirable properties. However, the potential of bottom‐up synthesized NPG for electronic devices has remained largely unexplored to date. Here, FETs based on bottom‐up synthesized chevron‐type NPG (C‐NPG), consisting of ordered arrays of nanopores defined by laterally connected chevron GNRs, are demonstrated. C‐NPG FETs show excellent switching performance with on–off ratios exceeding 10 4 , which are tightly linked to the structural quality of C‐NPG. The devices operate as p‐type transistors in the air, while n‐type transport is observed when measured under vacuum, which is associated with reversible adsorption of gases or moisture. Theoretical analysis of charge transport in C‐NPG is also performed through electronic structure and transport calculations, which reveal strong conductance anisotropy effects in C‐NPG. The present study provides important insights into the design of high‐performance graphene‐based electronic devices where ballistic conductance and conduction anisotropy are achieved, which could be used in logic applications, and ultra‐sensitive sensors for chemical or biological detection.

Mutlu, Zafer↗
DOE OSTI2021

Simultaneously Blocking Chemical Crosstalk and Internal Short Circuit via Gel-Stretching Derived Nanoporous Non-Shrinkage Separator for Safe Lithium-Ion Batteries

The separator, an ionic permeable and electronic insulating membrane between cathode and anode, plays a crucial role in the electrochemical and safety performance of batteries. However, the commercial polyolefin separators not only suffer from inevitable thermal shrinkage at elevated temperature, but also fail to inhibit the hidden chemical crosstalk of reactive gases such as O 2 , leading to often reported thermal runaway (TR) and hence preventing large-scale implementation of high-energy-density lithium-ion batteries. Herein, a nanoporous non-shrinkage separator (GS-PI) was fabricated via a novel gel-stretching orientation approach to eliminate TR. In situ synchrotron small angle X-ray scattering during heating clearly showed that the as-prepared thin GS-PI separator exhibits superior mechanical tolerance at high temperature, thus effectively preventing internal short circuit. Meanwhile, the unique nanoporous structure design further blocks chemical crosstalk and the associated exothermic reactions. Accelerating Rate Calorimetry test revealed that the practical 1 Ah LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622)/graphite pouch cell using GS-PI nanoporous separator show a maximum temperature rise (dT/dt max ) of only 3.7 °C s -1 compared to 131.6 °C s -1 in the case of Al 2 O 3 @PE macroporous separator. Furthermore, despite the reduced pore size, the GS-PI separator demonstrates better cycling stability than conventional Al 2 O 3 @PE separator at high temperature without sacrificing specific capacity and rate capability.

25 ENERGY STORAGE↗