Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel Production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Potential of U.S. Marine and Offshore Wind Energy to Power Marine Carbon Dioxide Removal

The goal of this project was to provide a preliminary feasibility assessment of powering different marine carbon dioxide removal (mCDR), carbon capture (mCC), and carbon sequestration (mCS) strategies with marine energy. The investigation focused on methods with clear power requirements at sea beyond monitoring such as artificial upwelling, deep ocean storage, electrochemical (eChem) mCDR and mCC, offshore microalgae cultivation, and seaweed farming and sinking. The project found that eChem mCDR powered by marine energy and offshore wind energy available in the United States could meet global CDR scales needed by 2040 and 2050 to limit warming to 1.5 degrees C by 2100 and marine energy alone could greatly contribute to reaching scales needed by 2040. Note that this preliminary estimate assumes that it is possible to harvest all the marine and offshore wind resources available in the United States with existing technology options. Though the biological methods were limited in scale they still hold promise in developing carbon negative fuels and products which can reduce emissions in the short term.

afforestation↗
DOE OSTI2024

Towards Cost-Competitive Microreactors

To assess the cost competitiveness of microreactors, a new tool integrating reactor design calculations with economic models was developed. Using detailed cost data and design specifications from the MARVEL project (85 kWth), the tool estimates costs for a more representative commercial microreactor (20 MWth). The LCOE for a 20 MWth MARVEL-like reactor is estimated at $236/MWh, with an overnight cost of about $12,000/kW (excluding fuel). Mass production could reduce costs by 70%, making the 10th unit cost around $3,700/kWe, which is economically competitive. The new neutronics-economics coupling tool also enables studying the impact of the design parameters on the economic figures of merit. The impact of changing the enrichment and reactor capacity on the LCOE has been studied.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

The Role of Low-Carbon Fuels and Carbon Capture in Decarbonizing the U.S. Clinker Manufacturing for Cement Production: CO2 Emissions Reduction Potentials

Low-carbon fuels, feedstocks, and energy sources can play a vital role in the decarbonization of clinker production in cement manufacturing. Fuel switching with renewable natural gas, green hydrogen, and biomass can provide a low-carbon energy source for the high-temperature process heat during the pyroprocessing steps of clinker production. However, up to 60% of CO2 emissions from clinker production are attributable to process-related CO2 emissions, which will need the simultaneous implementation of other decarbonization technologies, such as carbon capture. To evaluate the potential of fuel switching and carbon capture technologies in decarbonizing the cement industry, a study of the facility-level CO2 emissions is necessary. This study evaluates the potential for using a single low-carbon fuel as an energy source in clinker production for cement manufacturing compared to conventional clinker production (which uses a range of fuel mixes). In addition, conventional carbon capture (operated with natural gas-based steam for solvent regeneration) and electrified carbon capture configurations were designed and assessed for net-zero emission targets. Carbon emissions reductions with and without biogenic emissions credits were analyzed to ascertain their impact on the overall carbon accounting. Results show that carbon emissions intensity of cement can vary from 571 to 784 kgCO2eq/metric ton of cement without carbon capture and from 166.33 to 438.66 kgCO2eq/metric ton of cement with carbon capture. We find that when biogenic carbon credits are considered, cement production with a sustainably grown biomass as fuel source coupled with conventional carbon capture can lead to a net-negative emission cement (−271 kgCO2eq/metric ton of cement), outperforming an electrified capture design (35 kgCO2eq/metric ton of cement). The carbon accounting for the Scope 1, 2, and biogenic emissions conducted in this study is aimed at helping researchers and industry partners in the cement and concrete sector make an informed decision on the choice of fuel and decarbonization strategy to adopt.

42 ENGINEERING↗
DOE OSTI2023

Editorial: Advanced water splitting technologies development: Best practices and protocols

As the level of deployment and utilization of renewable energy sources, including wind and solar, continues to rise, large-scale, long-term energy storage technologies that could accommodate weekly and seasonal energy fluctuations will play a significant role in the overall deployment of renewable energies in the future. Harnessing and storing renewable energy resources via electrochemical, photoelectrochemical, or thermochemical processes by converting renewable energy into sustainable (energy storage) fuels have the potential to meet the long-term, terawatt scale energy storage challenge. Renewable hydrogen production is the cornerstone for sustainable fuel production and deep decarbonization of multiple sectors in our society. Cost-competitive clean hydrogen provides value to applications, such as 1) in the transportation sector for fuel cell vehicles, 2) in the electric grid sector for system stability and load balancing, and 3) in the industrial sector with metal refineries, cement production, and biomass upgrading (carbon-free fertilizer production). In addition, coupling clean renewable hydrogen with the carbon and nitrogen cycles enables known and well-established thermal-chemical processes to generate renewable hydrocarbon fuels and ammonia. The Advanced Water Splitting Technologies (AWST): low temperature electrolysis (LTE), high temperature electrolysis (HTE), photoelectrochemical (PEC) and solar thermo-chemical hydrogen (STCH) provide four unique and parallel approaches to produce low cost, low greenhouse gas (GHG) emission hydrogen at scale (Figure 1). Cost competitive clean hydrogen production using these four technologies is a current high priority focus for governments and industry. In June of 2022, the U.S. Department of Energy (DOE) launched the first in a series of Earthshot Initiatives. The Hydrogen Shot, “1 1 1” aims to reduce the cost of clean hydrogen by more than 80% to one dollar per one kilogram in 1 decade ($\$$1/kg H 2 ). The European Green Deal and the International Energy Agency (IEA) have implemented a strong focus on green hydrogen production for a clean and secure energy future.

benchmarking, low temperature electrolysis↗
DOE OSTI2025

Enhanced Production of Algae Lipids and Carbohydrates for Fuel and Polyurethane Precursors

This Final Technical Report summarizes the goals, approach, and outcomes of the project “Enhanced Production of Algae Lipids and Carbohydrates for Fuel and Polyurethane Precursors”. The project addressed the challenge of improving microalgae biomass productivity and simultaneously producing valuable polyurethane precursors (PUPs), from both lipids and carbohydrates, that can be converted into renewable biofuels and bio-based polyurethane (PU) products. By integrating advanced genetic engineering, traditional breeding, high-throughput screening, pilot cultivation, and chemical conversion technologies, the team achieved significant advancements in algae biotechnology.

09 BIOMASS FUELS↗
DOE OSTI2021

High-level fuel fabrication facility designs from discrete-event simulation

Like other industrial processes, the production of metallic nuclear fuels (MNF) requires that fabrication facilities be able to reliably meet production demands, operate efficiently, and adhere to federal and local safety regulations. In turn, the set of design variables employed by such a facility, such as operations policies, infrastructure and machinery purchased, and the type and number of staff hired, directly impact a facility’s ability to satisfy these goals. Therefore, facility designers must carefully determine which set of design variable values optimally satisfies these constraints. In this paper, we explore how values for these high-level design variables, namely hiring requirements, can be determined in the context of nuclear fuel manufacturing through the coupling of physics-based and discrete-event simulation technologies. Using the Versatile Test Reactor (VTR) program as a case study, we demonstrate how SCALE and MCNP nuclear physics model outputs can be integrated into ExtendSim discrete-event simulation (DES) models of the fuel fabrication process to determine the optimal number of staff hired to ensure fuel production goals are met, operations comply with effective dose limit regulations, and overall project costs are reduced.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Simultaneous isotopic analysis of fission product Sr, Mo, and Ru in spent nuclear fuel particles by resonance ionization mass spectrometry

Abstract Fission product Sr, Mo, and Ru isotopes in six 10-μm particles of spent fuel from a pressurized water reactor were analyzed by resonance ionization mass spectrometry (RIMS) and evaluated for utility in nuclear material characterization. Previous measurements on these same samples showed widely varying U, Pu, and Am isotopic compositions owing to the samples’ differing irradiation environments within the reactor. This is also seen in Mo and Ru isotopes, which have the added complication of exsolution from the UO 2 fuel matrix. This variability is a hindrance to interpreting data from a collection of particles with incomplete provenance since it is not always possible to assign particles to the same batch of fuel based on isotopic analyses alone. In contrast, the measured 90 Sr/ 88 Sr ratios were indistinguishable across all samples. Strontium isotopic analysis can therefore be used to connect samples with otherwise disparate isotopic compositions, allowing them to be grouped appropriately for interpretation. Strontium isotopic analysis also provides a robust chronometer for determining the time since fuel irradiation. Because of the very high sensitivity of RIMS, only a small fraction of material in each of the 10 μm samples was consumed, leaving the vast majority still available for other analyses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Bio-derived sustainable aviation fuels—On the verge of powering our future

Jet fuels derived from biomass (bio-derived sustainable aviation fuels or BSAFs) offer a means of reducing net carbon emissions from aviation. Drop-in substitute fuels are attractive for use with existing and near-future aviation fleets and fueling infrastructure. Yet fuels derived from different biomass feedstock and produced by different production pathways have different fuel properties. These fuel property differences—especially ignition properties—offer challenges. This chapter discusses the current status, challenges, and opportunities of BSAFs. Strategies for closer property matching and for modeling and dealing with varied and uncontrolled properties are highlighted.

ASTM jet fuel certification↗
DOE OSTI2022

Characterization of Preliminary Powder Production and Consolidation for Advanced LEU Fuel Concepts

A set of novel uranium-based alloys has been proposed for use in advanced LEU fuel systems that utilize powder metallurgical methods for fabrication of the fuel forms. This study seeks to evaluate the effectiveness of current fabrication methods to produce powder of each of the candidate alloys and consolidate composite systems. Powder samples were produced via atomization and analyzed for particle size, shape, and microstructure utilizing sieving methods and scanning electron microscopy (SEM). Preliminary pellet consolidation tests were conducted with the atomized powder using a press and sinter method. The resulting pellets were analyzed via SEM to evaluate the morphology of the composite system. These preliminary tests demonstrate the ability to produce powder but did not yield the desired quality of powder and impacted the ability to fabricate a fully dense pellet. A refined process is under development to produce a higher yield of small (<250 µm) spherical powder.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Finding Promising Candidates for Wet Growing Conditions: The Effect of Two Row Spacings on Biomass Production of Four Bioenergy Prairie Cordgrass Populations in a Wet Marginal Land

Demand for energy and the environmental consequences associated with fossil fuel emissions has created a need for alternative energy sources. To avoid conflict over the conversion of existing agricultural land from food production to fuel production, bioenergy crops could instead be cultivated on marginal land. Here, this study compared the performances, biomass yield, tiller density, and lignocellulosic bioenergy feedstock composition of four prairie cordgrass populations with two-row spacings cultivated on a waterlog-prone marginal land, as well as three other bioenergy candidate crops used as controls: big bluestem, M. × giganteus , and switchgrass. Across all populations and spacings, annual biomass yield of prairie cordgrass was 13 Mg ha −1 . Row spacing had significant impacts on prairie cordgrass productivity, with higher biomass yields observed in the 45 cm spacing than in the 90 cm spacing. Feedstock composition (cellulose, hemicellulose, ADL, and ash concentration) was not influenced by row spacing and did not deviate from expected values for growth on agricultural lands. However, biomass yields of the control species M . × giganteus and switchgrass planted in 45 cm spacing were higher than the prairie cordgrass. Our results provide evidence that prairie cordgrass could be a good energy crop with comparable biomass yield production to the energy crops M . × giganteus and switchgrass on waterlogged marginal land.

Bioenergy crops↗
DOE OSTI2023

The good, the bad, and the future: Systematic review identifies best use of biomass to meet air quality and climate policies in California

Abstract California has large and diverse biomass resources and provides a pertinent example of how biomass use is changing and needs to change, in the face of climate mitigation policies. As in other areas of the world, California needs to optimize its use of biomass and waste to meet environmental and socioeconomic objectives. We used a systematic review to assess biomass use pathways in California and the associated impacts on climate and air quality. Biomass uses included the production of renewable fuels, electricity, biochar, compost, and other marketable products. For those biomass use pathways recently developed, information is available on the effects—usually beneficial—on greenhouse gas (GHG) emissions, and there is some, but less, published information on the effects on criteria pollutants. Our review identifies 34 biomass use pathways with beneficial impacts on either GHG or pollutant emissions, or both—the “good.” These included combustion of forest biomass for power and conversion of livestock‐associated biomass to biogas by anaerobic digestion. The review identified 13 biomass use pathways with adverse impacts on GHG emissions, criteria pollutant emissions, or both—the “bad.” Wildfires are an example of one out of eight pathways which were found to be bad for both climate and air quality, while only two biomass use pathways reduced GHG emissions relative to an identified counterfactual but had adverse air quality impacts. Issues of high interest for the “future” included land management to reduce fire risk, future policies for the dairy industries, and full life‐cycle analysis of biomass production and use.

Agriculture↗
DOE OSTI2020

AGR-2 Compact 6-4-1 Post-Irradiation Examination Results

The Advanced Gas Reactor (AGR) Fuel Development and Qualification Program was established to perform research and development on tristructural isotropic (TRISO)-coated particle fuel to support deployment of a high-temperature gas-cooled reactor (HTGR). The work continues as part of the Advanced Reactor Technologies (ART) TRISO Fuel Program. The overarching goal of the program is to provide a baseline fuel qualification data set to support licensing and operation of an HTGR. To achieve these goals, the program includes the elements of fuel fabrication, irradiation, post-irradiation examination (PIE) and safety/heating testing, fuel performance modeling, and fission product transport (INL 2017). Several fuel irradiation experiments have been performed at the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL), and additional irradiations are planned. These experiments are intended to provide data on fuel performance under irradiation, support fuel fabrication process development, qualify fuel for operating and accident conditions, provide irradiated fuel for accident testing, and support development of fuel performance and fission product transport models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Status Report 2: Advanced Nuclear Reactors Utilized for Synthetic Fuel Creation

Synthetic fuels (synfuels) are hydrocarbon fuels that source energy from electricity. Synfuels have the potential to significantly reduce greenhouse gas emissions throughout the transportation sector. To achieve this substantial reduction in greenhouse gas emissions, the electricity must be sourced from zero- or near-zero-carbon fuel sources such as solar, wind, hydroelectricity, and nuclear power. Synfuels are produced from a combination of carbon and hydrogen sources. Hydrogen can be sourced from water electrolysis with near-zero-carbon electricity and heat (e.g., nuclear), while carbon dioxide can be sourced from ethanol and ammonia plants. In the hydrocarbon fuel synthesis process, hydrogen and carbon dioxide can be reacted to produce carbon monoxide and water, via the so-called reverse watergas shift reaction. Carbon monoxide can then react with additional hydrogen to form hydrocarbons, with carbon chains ranging from C1–C30 in the reaction known as the Fischer-Tropsch (F-T) synthesis reaction. The synthesized hydrocarbon molecules can then be hydro-processed with additional hydrogen and distilled into different carbon chain lengths so as to be compatible with existing conventional gasoline, jet, and diesel fuels. Carbon-free synfuel production comes with a “green premium” over the manufacture of identical products via conventional fossil fuels. Reports from Argonne National Laboratory (ANL) reveal that hydrogen costs dominate the cost of carbon-free synfuel production. This suggests that for the cost of green synfuel to approach that of conventional petroleum fuel, the cost of hydrogen must be approximately $\$1$/kg. Of the primary low-carbon energy sources, only nuclear carries the potential to produce hydrogen at below $\$2$/kg. (Still a bit above the lofty $\$1$/kg goal, but perhaps manageable). To further identify the potential for creating low-cost synfuels capable of competing with legacy technologies, the Department of Energy Office of Nuclear Energy has funded a multi-program, multi-lab effort among ANL, Idaho National Laboratory (INL), the Integrated Energy Systems (IES) program, and the Light Water Reactor Sustainability (LWRS) program. This collaboration effort will determine the possibility of using current and next generation nuclear reactors to create low-cost carbon-free synfuels for sale in the U.S. energy and commodities market.

10 SYNTHETIC FUELS↗
DOE OSTI2023

Optimizing design and dispatch of a resilient renewable energy microgrid for a South African hospital

Lack of access to reliable energy is a major concern for countries in sub-Saharan Africa. The national grids are unable to consistently satisfy demand. Therefore, users turn to distributed generation systems in the form of back-up generators. However, such systems are usually designed based on a rule of thumb. We employ a mixed-integer linear programming model that considers several options such as renewable energy, combined heat and power, and storage technologies, in addition to those on-site, to provide optimal design and dispatch decisions that minimize total cost. We apply this model to a case study for a hospital in South Africa, considering its need for reliable electricity in light of multiple outages that might occur over the course of a year, as well as its high heating and cooling loads. Our results show that optimal design and dispatch decisions for the distributed generation system address reliability challenges, regardless of the time at which they occur. And, these solutions yield millions of dollars in savings, suggesting that technologies such as the absorption chiller may be overlooked in typical designs; its integration can reduce demand charges even in the absence of combined heat and power. We show that total cost is most sensitive to changes in site electrical demand, followed by capital cost, fuel cost, photovoltaic production, and monthly demand charges; changes in fuel cost primarily affect system sizes of combined heat and power and the absorption chiller, while photovoltaic system size is more sensitive to the changes in capital and fuel costs, photovoltaic resource availability, and hourly electrical demand. Finally, an outage simulator demonstrates the ability of our optimized system to sustain with no interruptions in power five-hour outages with probability 1.0 and ten-hour outages with probability 0.65, significant improvements over 0.5 and 0.0, respectively, under a business-as-usual case.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Characterization of a minor actinides bearing metallic fuel pin irradiated in EBR-II

The X501 transmutation experiment irradiated in Experimental Breeder Reactor II (EBR-II) was intended to evaluate the safety and performance of the addition of minor actinides (Am, Np) into the metallic nuclear fuel system. The irradiation of this experiment is also of paramount importance for comparisons between true fast spectrum irradiations (e.g. EBR-II) and shrouded irradiation capsules performed at the thermal neutron spectrum Idaho National Laboratory Advanced Test Reactor. The X501 experimental fuel pins were irradiated to a peak measured burnup of 6.2% fission per initial heavy metal atom. This paper reports and discusses Postirradiation Examination results for one of two minor actinide bearing pins from the EBR-II X-501 experiment (X501-G591) with a focus on fuel microstructure evolution. Additionally, fuel swelling, fission product distribution, cladding strain, fission gas release, fuel microstructure and fuel cladding chemical interaction were all evaluated. The fission gas release was 79.9% and the microstructure along the fuel pin presented several characteristics very similar to other EBR-II U-Pu-Zr ternary metallic fuel experience. Minor actinides seem to not dramatically affect the overall performance of this candidate transmutation fuel. Scanning Electron Microscopy was also performed and an in-depth characterization of the different regions and phases is presented. Performance data from these irradiations can be used to inform the feasibility of minor actinide transmutation in future reactor systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Hydroxyapatite catalyzed hydrothermal liquefaction transforms food waste from an environmental liability to renewable fuel

Food waste is an abundant and inexpensive resource for the production of renewable fuels. Biocrude yields obtained from hydrothermal liquefaction (HTL) of food waste can be boosted using hydroxyapatite (HAP) as an inexpensive and abundant catalyst. Combining HAP with an inexpensive homogeneous base increased biocrude yield from 14 ± 1 to 37 ± 3%, resulting in the recovery of 49 ± 2% of the energy contained in the food waste feed. Detailed product analysis revealed the importance of fatty-acid oligomerization during biocrude formation, highlighting the role of acid-base catalysts in promoting condensation reactions. Economic and environmental analysis found that the new technology has the potential to reduce US greenhouse gas emissions by 2.6% while producing renewable diesel with a minimum fuel selling price of $1.06/GGE. HAP can play a role in transforming food waste from a liability to a renewable fuel.

09 BIOMASS FUELS↗
DOE OSTI2024

Role of Hydrogen as Fuel in Decarbonizing US Clinker Manufacturing for Cement Production: Costs and CO2 Emissions Reduction Potentials

As a low-carbon fuel, feedstock, and energy source, hydrogen is expected to play a vital role in the decarbonization of high-temperature process heat during the pyroprocessing steps of clinker production in cement manufacturing. However, to accurately assess its potential for reducing CO2 emissions and the associated costs in clinker production applications, a techno-economic analysis and a study of facility-level CO2 emissions are necessary. Assuming that up to 20% hydrogen can be blended in clinker fuel mix without significant changes in equipment configuration, this study evaluates the potential reduction in CO2 emissions (scopes 1 and 2) and cost implications when replacing current carbon-intensive fuels with hydrogen. Using the direct energy substitution method, we developed an Excel-based model of clinker production, considering different hydrogen–blend scenarios. Hydrogen from steam methane reformer (gray) and renewable-based electrolysis (green) are considered as sources of hydrogen fuel for blend scenarios of 5%–20%. Metrics such as the cost of cement production, facility-level CO2 emissions, and cost of CO2 avoided were computed. Results show that for hydrogen blends (gray or green) between 5% and 20%, the cost of cement increases by 0.6% to 16%, with only a 0.4% to 6% reduction in CO2 emissions. When the cost of CO2 avoided was computed, the extra cost required to reduce CO2 emissions is $229 to $358/ metric ton CO2. In summary, although green hydrogen shows promise as a low-carbon fuel, its adoption for decarbonizing clinker production is currently impeded by costs.

Okeke, Ikenna J.↗