SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The results achieved toward developing a baseline communications channel model for studying low bit rate telemetry transmissions from Venus Planetary Explorer spacecraft are presented. The overall communications systems model, discrete channel model, input signal generation, and signal acquisition model are discussed. Discrete Fourier transform considerations, sampling routines, and flow charts are included.
Spectral analyses of angle-modulated communication systems is studied by: (1) performing a literature survey of candidate power spectrum computational techniques, determining the computational requirements, and formulating a mathematical model satisfying these requirements; (2) implementing the model on UNIVAC 1230 digital computer as the Spectral Analysis Program (SAP); and (3) developing the hardware specifications for a data acquisition system which will acquire an input modulating signal for SAP. The SAP computational technique uses extended fast Fourier transform and represents a generalized approach for simple and complex modulating signals.
New ideas and techniques recently put to use at the Jet Propulsion Laboratory for structural dynamics of spacecraft are presented. This paper deals with practical problems rather than elaborate mathematical theories and is concerned with the system approach for structural dynamics, an approach which has received attention in the recent past owing to the use of the fast Fourier transform algorithm which permits an economical use of digital computers. Concept of dynamics mass in the frequency domain is introduced. Reaction forces and moments at the base of a spacecraft in boosted flight configuration are determined. A combination of digital and analog techniques for special problems is presented. The examples reported are on actual spacecraft.
Efficient and practical methods of simulating stationary and nonstationary random envelope processes are presented. The stationary envelope processes are simulated by using the fast Fourier transform while the nonstationary envelope processes are simulated as the square root of the sum of a series of cosine functions and a series of sine functions with random phase angles. Typical applications of the envelope simulation are the simulations of peaks and troughs which play an important role in the analyses of the first excursion probability, fatigue and crack propagation. In particular, applications to the crack propagation under random loadings are demonstrated in detail.
A study of source-encoding techniques that afford a reduction of data-transmission rates is made with particular emphasis on the compression of transmission bandwidth requirements of band-limited functions. The feasibility of bandwidth compression through analog signal rooting is investigated. It is found that the N-th roots of elements of a certain class of entire functions of exponential type possess contour integrals resembling Fourier transforms, the Cauchy principal values of which are compactly supported on an interval one N-th the size of that of the original function. Exploring this theoretical result, it is found that synthetic roots can be generated, which closely approximate the N-th roots of a certain class of band-limited signals and possess spectra that are essentially confined to a bandwidth one N-th that of the signal subjected to the rooting operation. A source-encoding algorithm based on this principle is developed that allows the compression of data-transmission requirements for a certain class of band-limited signals.
Gyrosynchrotron radiation fields from mildly relativistic electrons in a magnetoactive plasma are asymptotically calculated by using the Green tensor and the Fourier transformation. These fields consist of the two components which correspond to the ordinary and extraordinary modes. Taking into account these fields, the emissivities and the absorption coefficients from an arbitrary distribution of electrons are calculated in order to discuss the intensity, spectrum, and polarization of gyrosynchrotron radiation. In general, the transfer of electromagnetic energy takes place along a direction different from that of the wave normal since the radiation fields have a nonvanishing component along the direction of the wave normal. A consideration is given on the problem of radiative transfer in relation to the Stokes parameters.
The detection and significance of 300-second oscillations in extreme-ultraviolet lines formed in the solar transition region are discussed. Detection was accomplished with the Goddard extreme-ultraviolet spectroheliograph and the Wolter type II grazing-incidence telescope. The Cooley-Tukey algorithm was used to compute the required Fourier transform of the discrete data. Presence of significant power in the observed lines around 262 sec seems to be the first observational evidence that periodic waves in this frequency range persist at heights where local kinetic temperatures are close to one million degrees K. The observed horizontal extent of the wave fronts appears to be much greater than the extent of coherent oscillating elements at chromospheric heights. Several implications are stated for the problem of heating of the transition region and low corona.
An f/2 objective-grating spectrograph aboard an Aerobee rocket recorded a faint image of Comet Tago-Sato-Kosaka (1969g) in L-alpha emission. Some sharpening of the image and reduction of film grain noise was accomplished by multiplying the picture's Fourier transform by an optimum filter function. After this processing, which was carried out digitally, the L-alpha comet image appeared as a nearly circularly symmetric diffuse glow approximately 800,000 km in diameter. There was also the suggestion of a faintly visible core of emission whose dimensions are less than 100,000 km. The sublimation of ice in the nucleus of the comet and the subsequent dissociation of the free water molecules by sunlight could produce a large cloud of hydrogen atoms around the comet. Resonant reradiation of solar L-alpha emission by this cloud is probably responsible for the most of the observed emission.
Discussion of the interactive man-computer system (WIMDCO) for measuring cloud motion from ATS pictures. The multipicture model of ATS navigation is used for consecutive ATS digital picture alignment to provide the required precision in cloud motion measurements by automated tracking techniques. Cloud motion is measured by tracking clouds between two digital pictures with the aid of two-dimensional cross correlation analysis. The fast Fourier transform method and other programming techniques are used for time and cost minimization. Cloud motion vectors were computed over three time intervals in July, 1969. The EW and NS components were reproducible within roughly 2 knots.
Spatial frequency encoding is described as it applies to both photographic and television systems. In each case, color separations amplitude modulate spatial frequency carriers. The photographic system separates the carriers in the two-dimensional Fourier transform plane using coherent optics; the television system employs a two-dimensional electrical filter to perform the same separation. These filters are synthesized so that the two-dimensional bandwidths of the television camera are used efficiently. Nonlinear processing techniques are also described to minimize crosstalk between channels.
It is shown that the correct lowest-order two-particle correlation function solution to the Bogoliubov-Born-Green-Kirkwood-Yvon hierarchy is given via a Green's function whose Fourier transform satisfies the analyticity requirements for causality. The Bogoliubov adiabatic approximation is shown to imply a solution which is acausal. Extension to the s-particle correlation function is discussed.
The n-dimensional scattering problem is solved by means of a k-space formulation of the field equations, thereby replacing the conventional integral equation formulation by a set of two algebraic equations in two unknowns in two spaces (the constitutive equation being an algebraic equation in x-space). These equations are solved by an iterative method with the aid of the fast Fourier transform (FFT) algorithm connecting the two spaces, requiring very simple initial approximations. Since algebraic and FFT equations are used, the number of arithmetic multiple-add operations and storage allocations required for a numerical solution are reduced from the order of N sq (for solving the matrix equations resulting from the conventional integral equations) to the order of N(log base 2 of N) and N, respectively (where N is the number of data points required for the specification of the problem). The advantage gained in speed and storage is thus of the order of N/log base 2 of N and N, respectively. This method is thus considerably more efficient than the conventional matrix method, and permits exact numerical solutions for much larger problems. Arguments are presented toward the view that the field equations are more fundamental in k-space. The details and some numerical results of the application of this method to the three-dimensional electromagnetic scattering problems are presented as an example.
The modeling of communication receivers is described at both the circuit detail level and at the block level. The largest effort was devoted to developing new models at the block modeling level. The available effort did not permit full development of all of the block modeling concepts envisioned, but idealized blocks were developed for signal sources, a variety of filters, limiters, amplifiers, mixers, and demodulators. These blocks were organized into an operational computer simulation of communications receiver circuits identified as the frequency and time circuit analysis technique (FATCAT). The simulation operates in both the time and frequency domains, and permits output plots or listings of either frequency spectra or time waveforms from any model block. Transfer between domains is handled with a fast Fourier transform algorithm.
The characteristics of the holographic logic computer are discussed. The holographic operation is reviewed from the Fourier transform viewpoint, and the formation of holograms for use in performing digital logic are described. The operation of the computer with an experiment in which the binary identity function is calculated is discussed along with devices for achieving real-time performance. An application in pattern recognition using neighborhood logic is presented.
The advent of digital hardwares has made it feasible to implement many communication system components digitally. With the exception of frequency down conversion, the proposed low data rate communication system uses digital hardwares completely. Although the system is designed primarily for deep space communications with large frequency uncertainty and low signal-to-noise ratio, it is also suitable for other low data rate applications with time-shared operation among a number of channels. Emphasis is placed on the fast Fourier transform receiver and the automatic frequency control via digital filtering. The speed available from the digital system allows sophisticated signal processing to reduce frequency uncertainty and to increase the signal-to-noise ratio. The practical limitations of the system such as the finite register length are examined. It is concluded that the proposed all-digital system is not only technically feasible but also has potential cost reduction over the existing receiving systems.
Some techniques are presented and the software documentation for the digital enhancement of radiographs. Both image handling and image processing operations are considered. The image handling operations dealt with are: (1) conversion of format of data from packed to unpacked and vice versa; (2) automatic extraction of image data arrays; (3) transposition and 90 deg rotations of large data arrays; (4) translation of data arrays for registration; and (5) reduction of the dimensions of data arrays by integral factors. Both the frequency and the spatial domain approaches are presented for the design and implementation of the image processing operation. It is shown that spatial domain recursive implementation of filters is much faster than nonrecursive implementations using fast fourier transforms (FFT) for the cases of interest in this work. The recursive implementation of a class of matched filters for enhancing image signal to noise ratio is described. Test patterns are used to illustrate the filtering operations. The application of the techniques to radiographic images of metallic structures is demonstrated through several examples.
The spectral analysis program (SAP) was developed to provide the Manned Spacecraft Center with the capability of computing the power spectrum of a phase or frequency modulated high frequency carrier wave. Previous power spectrum computational techniques were restricted to relatively simple modulating signals because of excessive computational time, even on a high speed digital computer. The present technique uses the recently developed extended fast Fourier transform and represents a generalized approach for simple and complex modulating signals. The present technique is especially convenient for implementation of a variety of low-pass filters for the modulating signal and bandpass filters for the modulated signal.
The calculated stresses and displacements induced anisotropic plates by short duration impact forces are presented. The theoretical model attempts to model the response of fiber composite turbine fan blades to impact by foreign objects such as stones and hailstones. In this model the determination of the impact force uses the Hertz impact theory. The plate response treats the laminated blade as an equivalent anisotropic material using a form of Mindlin's theory for crystal plates. The analysis makes use of a computational tool called the fast Fourier transform. Results are presented in the form of stress contour plots in the plane of the plate for various times after impact. Examination of the maximum stresses due to impact versus ply layup angle reveals that the + or - 15 deg layup angle gives lower flexural stresses than 0 deg, + or - 30 deg and + or - 45 deg. cases.