Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flow chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Defining a Metric to Assess Leachability of Contaminants from Cementitious Waste Forms in Lab Testing Related to Hanford - 20478

This paper reports on the determination of performance metrics for the release of four contaminants (technetium, iodine, nitrate, and chromium) from a theoretical supplemental low-activity waste (LAW) inventory of grout in the Hanford Integrated Disposal Facility (IDF). The performance metric was defined as a retardation factor, R, that can be used to quantify a waste form's ability to retain one contaminant compared with an un-retarded species (e.g., sodium). By setting the target R value at the magnitude required to maintain concentrations of the contaminants below the drinking water standard at the point of compliance for the IDF, a bar for grout leach performance can be established for screening laboratory leach test data. The R can be converted to a corresponding laboratory-observed diffusivity value against which to assess leach test data. The individual performance metrics were determined through an iterative set of simulations using a variable saturation and transport flow model of a grout waste form inventory in the IDF to calculate the resulting concentration-based requirements at the point of compliance. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Continuous partial oxidation of methane to methanol over Cu-SSZ-39 catalysts

Here, the direct conversion of methane to methanol using molecular oxygen as the oxidant is a grand challenge in the chemical sciences. Here we describe our efforts in using copper-exchanged SSZ-39 for this chemistry and show it is a promising material for this reaction. Testing in a continuous flow reactor at 225 °C, Cu-SSZ-39 showed superior activity for methane partial oxidation compared to Cu-SSZ-13 (site time yields of 26.9 ± 0.8 mol CH3OH ·mol Cu -1 ·h -1 *10 -3 versus 13.2 mol CH3OH ·mol Cu -1 ·h -1 *10 -3 respectively). A clear maximum in methanol productivity, both in terms of a mass catalyst basis and copper atom basis is observed for Cu-SSZ-39 at a Cu/Al ~ 0.2. Running this reaction in the absence of oxygen over samples with a Cu/Al > 0.1 the reactivity is markedly lower than that in the presence of oxygen unlike what is observed in SSZ-13.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

Numerical study of finite-rate supersonic combustion using parabolized equations

A set of partial differential equations, describing the two-dimensional supersonic chemically-reacting flow of the hydrogen-air system, is formulated such that the equations are parabolic in the streamwise direction. A fully-implicit fully-coupled finite-difference algorithm is used to develop a computer code which solves the governing equations by marching in the streamwise direction. The combustion process is modeled by a two-step finite-rate chemistry whereas turbulence is simulated by an algebraic turbulence model. Results of two calculations of internal supersonic reacting flow show fairly good agreement with the results obtained by the more costly full Navier-Stokes procedure.

Chitsomboon, T.↗
DOE OSTI2024

Coupled Transport, Reactivity, and Mechanics in Fractured Shale Caprocks

Abstract Shales are low‐permeability caprocks that confine fluid, such as CO 2 , nuclear waste, and hydrogen, in storage formations. Stress‐induced fractures in shale caprocks provide pathways for fluid to leak and potentially contaminate fresh water aquifers. Fractured shales are also increasingly considered as resources for CO 2 sequestration, enhanced geothermal, and unconventional energy recovery. Injecting reactive fluids into shales introduces chemical disequilibrium, causing an onset of a series of dissolution, precipitation, and fines mobilization mechanisms. The reactions have rapid kinetics and significant impact on porosity and permeability; consequently, flow and storage properties of caprocks. While previous research has explored the separate effects of these reactions, this study aims to uncover their simultaneous occurrence and collective influence. This study unveils these highly coupled transport and reactivity mechanisms by tracking and visualizing the reaction‐induced alterations in the matrix, microcracks, and fractures of shales over time. We conducted brine injection experiments sequentially at pH 4 and 2 in a naturally fractured Wolfcamp shale sample while simultaneously imaging the dynamic processes using X‐ray computed tomography (CT). CT images are validated by finer resolution images obtained using micro‐CT and scanning electron microscopy. We also tracked the sample permeability and fluid chemistry using brine permeability and inductively coupled plasma mass spectrometry, respectively. Findings show that fluid primarily flowed through fractures, dissolving reactive minerals and mobilizing fines on fracture surfaces. Dissolution of fracture asperities under confining stress resulted in the closing of fractures. Clogging in narrow fracture pathways, caused by fines accumulation, diverted fluid flow into matrix pores.

58 GEOSCIENCES↗
NASA NTRS2004

Multidimensional Unstructured-Grid Liquid Rocket Engine Nozzle Performance and Heat Transfer Analysis

The objective of this study is to conduct a unified computational analysis for computing design parameters such as axial thrust, convective and radiative wall heat fluxes for regeneratively cooled liquid rocket engine nozzles, so as to develop a computational strategy for computing those parameters through parametric investigations. The computational methodology is based on a multidimensional, finite-volume, turbulent, chemically reacting, radiating, unstructured-grid, and pressure-based formulation, with grid refinement capabilities. Systematic parametric studies on effects of wall boundary conditions, combustion chemistry, radiation coupling, computational cell shape, and grid refinement were performed and assessed. Under the computational framework of this study, it is found that the computed axial thrust performance, flow features, and wall heat fluxes compared well with those of available data and calculations, using a strategy of structured-grid dominated mesh, finite-rate chemistry, and cooled wall boundary condition.

Wang, Ten-See↗
DOE OSTI2024

In the Mix : A Workshop Merging Computational Chemistry and Electrochemistry Alongside Data Science

As chemistry expands to more complex and interdisciplinary areas, a new generation of diverse researchers must engage with science and learn effective cross-disciplinary collaboration and communication. To these ends, we designed and implemented In the Mix, a graduate student-led, two-day workshop for undergraduate students promoting collaborative science in the context of energy storage innovations. Here, the interactive workshop was designed for future and emerging researchers to gain hands-on experience with data science, computational chemistry, and electrochemistry techniques that are critical for developing materials for battery technologies. Participants also visited commercial renewable energy facilities to help them connect discovery-based research with industry and broader societal considerations. The workshop content and structure ensured that participants experienced the interrelatedness of the fields and understood the importance of collaborative research to yield scientific advances with real-world applications. An external team evaluated the workshop and participants’ perceptions of their experiences. While our research context was energy storage, the workshop goals and outcomes are applicable to other contexts. Interdisciplinary, experiential workshops are a key avenue to broadening participation in science and research, and the ideas presented here can be readily modified for other scientific contexts and/or incorporated as broader impact activities.

25 ENERGY STORAGE↗
DOE OSTI2023

Supporting data for "Frozen flume experiments indicate rapid permafrost riverbank erosion depends on bank roughness"

This dataset contains supporting files detailing five frozen flume experiments conducted at the Caltech Earth Surface Dynamics Laboratory to investigate rates of ablation-limited permafrost riverbank erosion under controlled conditions. Water flowed past a bank of saturated, frozen sand and ice and gradually eroded the bank by thawing pore ice and immediately entraining sand and washing it downstream. Experiments were scaled for flow hydraulics and heat transfer allowing comparisons between our results and natural permafrost riverbanks. For each experiment, we measured the initial and final sand bank topography using a Keyence laser scanner, water surface slope at 3-min intervals throughout the experiment using a Massa sonar scanner, bank erosion using 10-sec overhead timelapse imagery taken by an overhead camera, water and bank temperature using thermistors frozen into the sand bank and sampling at 2 Hz, and water discharge using an in-line flow meter. We include calibration data for the carriage (engineered by the Saint Anthony Falls Laboratory) used to make sonar and laser topography measurements. We also include calibration data for temperature sensors, water discharge measurements, and images of a regular grid placed in the flume to align overhead camera images with the carriage datum. Grain size analysis for the channel bed (gravel) was produced using a pebble count and bank sand was measured using a Camsizer X2. In addition to the five frozen experiments, we include sonar scans of water surface slope and Keyence scans of bed and bank topography for calibration experiments ran with an immobile gravel bank and bed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Development of an All-Aqueous Thermally Regenerative Redox Flow Battery to Support Fossil Fuel Assets

Low-temperature thermal energy, a largely untapped resource, holds significant promise for large-scale electrical power generation globally. Various stationary sources, including industrial entities and thermal power plants, emit considerable low-temperature heat that currently remains unutilized. This energy is often overlooked because its low temperature renders it unsuitable for efficient power generation using conventional methods. However, current research is exploring diverse technologies capable of converting low-temperature heat into grid-scale power, aiming to enhance grid efficiency, further decarbonization initiatives, and facilitate a shift toward more decentralized power systems. One such innovative technology is the thermally regenerative battery (TRB), noted for its high power and energy densities compared to similar technologies, positioning it as a potential game-changer in power generation. TRBs integrate two scalable and well-established unit operations: a redox flow battery and a distillation column. This integration suggests that once an effective TRB chemistry is established, the pathway to commercialization could be expedited. The copper-based thermally regenerative ammonia battery (Cu aq -TRAB) stands out as the first TRB that circumvents electrodeposition/dissolution reactions, stabilizing Cu(I) and Cu(II) within the electrolyte and maintaining stability of all electroactive species in an aqueous phase. This stabilization has led to improvements in coulombic efficiency, open circuit potential, and copper solubility, thereby enhancing power density, energy density, and overall energy efficiency. Preliminary tests were conducted to determine the effects of various electrolyte species on the performance metrics of the battery, both theoretically and experimentally. These tests revealed that the solubility of copper in the Cu aq -TRAB electrolyte was constrained by the Cu(I)-NH 3 complex. Adjusting the background electrolyte to 5 M NH4Br and the ligand concentration to 4 M NH 3 enabled the copper concentration to reach a maximum of 0.6 M. This modification led to an estimated theoretical maximum energy density of 9.5 Wh L -1 for the Cu aq -TRAB. Additionally, full cell testing indicated a tradeoff between peak power and energy density with varying copper and ammonia concentrations. Increasing the applied current density during discharge linearly raised the average power output, with a minimal reduction in energy density due to a balance between higher ohmic overpotential and reduced time for undesirable ammonia crossover. Furthermore, a comprehensive numerical sensitivity analysis of the complete Cu aq -TRAB system was performed. This analysis aimed to assess how the battery and the distillation column responded to changes in system input parameters, providing insights into optimal research directions for enhancing system performance. The analysis revealed that at room temperature, battery power was significantly more sensitive to ohmic losses than to mass transfer, with reaction rates having minimal impact. This trend continued even at higher temperatures. Also, the thermal energy required for ammonia separation was studied, showing that increased temperatures generally reduced energy requirements, except in low-pressure scenarios above 65 °C. An investigation into membrane performance in the Cu aq -TRAB was undertaken, given the significant impact of ammonia transport control and ohmic losses on system performance. Various membranes were evaluated to identify key performance metrics. Among the tested membranes, Selemion CMVN exhibited the highest performance, with a peak power density of 84 mW cm -2 and average values of 26 ± 6.8 mW cm -2 for power density and 2.9 Wh L -1 for energy density at an applied current density of 50 mA cm -2 . An economic assessment indicated a levelized cost of storage at $410 per MWh under optimal conditions, highlighting the commercial potential of the Cu aq -TRAB when utilizing cost-effective, readily available materials.

25 ENERGY STORAGE↗
DOE OSTI2021

SPRUCE Outflow Chemistry Data for Experimental Plots Beginning in 2016

This data set includes the chemistry of outflow waters in the SPRUCE experiment plots located in the S1 bog of the USDA Forest Service Marcell Experimental Forest (MEF) in northern Minnesota, 40 km north of Grand Rapids. These data are post-treatment data from the warming and elevated carbon dioxide (CO2) treatments associated with the SPRUCE experiment. There are ten experimental plots in SPRUCE: five temperature treatments (+0, +2.25, +4.5, +6.75, +9°C) at ambient CO2, and the same five temperature treatments at elevated CO2 (+500 ppm). Sample collection and analyses started in March of 2016 and will continue for the duration of the experiment. Samples were analyzed for pH, specific conductivity, anion concentrations (chloride, sulfate), cation concentrations (calcium, potassium, magnesium, sodium, aluminum, iron, manganese, silicon, strontium), nutrient concentrations (ammonium, nitrate, soluble reactive phosphorus, total nitrogen, total phosphorus), and total organic carbon (TOC) concentrations. Subsets of the samples have been analyzed for natural-abundance stable isotopes of water (δ18O-H2O and δD-H2O), dissolved carbon dioxide (δ13C-CO2), and dissolved methane (δ13C-CH4), and concentrations of total mercury (Thg), methylmercury (MeHg), ferrous iron (Fe2+), ferric iron (Fe3+), dissolved inorganic carbon (DIC), and dissolved methane (CH4).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1982

Effect of processing on Polymer/Composite structure and properties

Advances in the vitality and economic health of the field of polymer forecasting are discussed. A consistent and rational point of view which considers processing as a participant in the underlying triad of relationships which comprise materials science and engineering is outlined. This triad includes processing as it influences material structure, and ultimately properties. Methods in processing structure properties, polymer science and engineering, polymer chemistry and synthesis, structure and modification and optimization through processing, and methods of melt flow modeling in processing structure property relations of polymer were developed. Mechanical properties of composites are considered, and biomedical materials research to include polymer processing effects are studied. An analysis of the design technology of advances graphite/epoxy composites is also reported.

Source record↗
NASA NTRS1986

A kinetics study of the homogeneous and heterogeneous components of the HCl + ClONO2 reaction

The kinetics of the reaction HCl + ClONO2 to Cl2 + HNO3 were investigated at 298 K using a flow reactor with FTIR analysis to assess the importance of this reaction for stratospheric chemistry. The observed reaction was characteristic of a heterogeneous process; an upper limit of 5 x 10 to the -18th cu cm/molecule per s was obtained for the homogeneous gas phase rate constant. From calculations of the first order wall rate constant, estimates were made of the reaction rate on stratospheric aerosols. Because both HCl and ClONO2 need to be adsorbed on the particle surface, the reaction will be of negligible importance under most stratospheric conditions.

Friedl, Randall R.↗
NASA NTRS1987

Navier-Stokes and viscous shock-layer solutions for radiating hypersonic flows

Results are presented from the Navier-Stokes and viscous shock-layer (VSL) calculations with nonequilibrium and equilibrium chemistry, respectively. These calculations contain coupling to the Aerotherm radiation code RAD. A simplified form of the electron energy equation is used to obtain an electron temperature in the Navier-Stokes calculations. The radiation in the flowfield is calculated using this temperature. The Navier-Stokes code is used at high altitude only, whereas the VSL code is employed for the entire entry period to make estimates of the radiative and convective heating to the Fire II vehicle. Results from the Navier-Stokes code have also been compared with the predictions of Lee and Kawamura, who used gray-gas radiation model and thin-layer Navier-Stokes equations. Quite good agreement is obtained between the measured and computed values of radiative and convective heating from the VSL code in th medium-to-low altitude flight regime of the Fire II vehicle. At high altitudes, the Navier-Stokes calculations considerably overpredict the Fire II flight data for radiative intensity. This is attributed to the deficiencies in the Aerotherm radiation model when used for low-density flight conditions. This model contains the thermal equilibrium assumption and precludes accounting for the collision-limiting phenomenon at high altitudes. Present Navier-Stokes calculations highlight the effect of these assumptions on radiative heating calculations for such conditions.

Gupta, Roop N.↗
NASA NTRS1988

A study of numerical methods for hyperbolic conservation laws with stiff source terms

The proper modeling of nonequilibrium gas dynamics is required in certain regimes of hypersonic flow. For inviscid flow this gives a system of conservation laws coupled with source terms representing the chemistry. Often a wide range of time scales is present in the problem, leading to numerical difficulties as in stiff systems of ordinary differential equations. Stability can be achieved by using implicit methods, but other numerical difficulties are observed. The behavior of typical numerical methods on a simple advection equation with a parameter-dependent source term was studied. Two approaches to incorporate the source term were utilized: MacCormack type predictor-corrector methods with flux limiters, and splitting methods in which the fluid dynamics and chemistry are handled in separate steps. Various comparisons over a wide range of parameter values were made. In the stiff case where the solution contains discontinuities, incorrect numerical propagation speeds are observed with all of the methods considered. This phenomenon is studied and explained.

Leveque, R. J.↗
NASA NTRS1990

Tropospheric sounders

The Measurement of Air Pollution Satellites (MAPS) experiment is a nadir-viewing gas correlation filter radiometer that has flow on the space shuttle in 1981 and 1984. The Tropospheric Radiometer for Atmospheric Chemistry and Environment Research (TRACER) is a proposed multi-level gas correlation filter radiometer experiment proposed for the Earth Observing System (Eos) and has received phase 1 approval. Each experiment is discussed.

Wallio, H. A.↗
NASA NTRS1992

Numerical analysis of bipropellant combustion in liquid thrust chambers by an Eulerian-Eulerian approach

The liquid thrust chambers performance (LTCP) code is used for parametric studies of flow and combustion in liquid rocket engines. Multiphase flow equations are solved in an Eulerian-Eulerian framework, and multistep finite rate chemistry is incorporated. The discretization scheme is fully implicit and is based on the total variation diminishing (TVD) scheme, which is accurate, robust, very efficient and capable of handling steep gradients and stiff chemistry. Effects of injection velocity and chamber size have been considered, and the effect of group combustion on the evaporation rate has been studied for a dense spray.

Dang, A. L.↗
NASA NTRS1992

An investigation of a wall-injected scramjet using a shock tunnel

Experimental results are presented for several wall-injected, constant-area scramjet experiments, performed in the T4 free-piston-driven shock tunnel. Stagnation enthalpies range from 5.7 to 10.1 MJ/kg, corresponding to flight Mach numbers of Mach 9.7 to Mach 13. Hydrogen fuel is injected from the rear of a step into a supersonic air stream, with combustion-chamber Mach numbers of 3.6 and 4.4, and static pressures of 40 kPa. The experimental results are compared to numerical predictions obtained from a two-dimensional, parabolic Navier-Stokes code, which modeled turbulence with a compressibility modified k-epsilon model, and used multi-reaction, finite-rate chemistry. The numerical and experimental results show reasonable agreement and indicate that the scramjet flows studied are predominantly mixing limited.

Brescianini, C. P.↗