Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Failure Rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Sensory redundancy management: The development of a design methodology for determining threshold values through a statistical analysis of sensor output data

Sensor redundancy management (SRM) requires a system which will detect failures and reconstruct avionics accordingly. A probability density function to determine false alarm rates, using an algorithmic approach was generated. Microcomputer software was developed which will print out tables of values for the cummulative probability of being in the domain of failure; system reliability; and false alarm probability, given a signal is in the domain of failure. The microcomputer software was applied to the sensor output data for various AFT1 F-16 flights and sensor parameters. Practical recommendations for further research were made.

Scalzo, F.↗
NASA NTRS2023

Effects of Strain Rate and Surface Finish on Tensile Properties in High Pressure Hydrogen — A Case Study for LP-DED NASA HR-1

NASA has advanced NASA HR-1 as a solution for liquid rocket engine components that operate in hydrogen rich environments using various AM techniques. The NASA HR-1 for AM applications was specifically formulated for high ductility in high pressure gaseous hydrogen environment in addition to high strength and low cycle fatigue (LCF) resistance. NASA HR-1 meets materials requirements for liquid rocket engine components, including good hydrogen resistance, high conductivity, good LCF performance, and high elongation and strength for components in medium heat flux environments. NASA has completed fabrication of several subscale and full-scale channel wall nozzles in LP-DED NASA HR-1 and completed hot-fire testing. This includes refinement of the process to produce thin-walls and various channel geometries to meet the requirements for channel wall nozzle applications. The main objective of this investigation is to better understand the effects of tensile test strain rate and specimen surface finish on the amount of tensile ductility degradation in high pressure gaseous hydrogen environments. Performing smooth tensile tests in high pressure hydrogen and nitrogen environments can serve as a rapid and economical screening method to determine the relative susceptibility of materials to HEE. This paper presents the tensile test results for LP-DED NASA HR-1 in hydrogen and details the material evaluation on the effects of strain rate and surface finish condition on surface cracking behavior and fracture characteristics. The resistance to HEE for LP-DED NASA HR-1 and the wrought alloy is compared under the same testing conditions. Loss of tensile ductility is quantified in terms of changes in elongation at failure in hydrogen to compare HEE susceptibility. The most suitable strain rate and specimen surface finish condition for future HEE screening testing at MSFC are recommended.

Additive manufacturing↗
NASA NTRS1984

Elevated temperature compressive steady state deformation and failure in the oxide dispersion strengthened alloy MA 6000E

The compressive flow strength-strain rate behavior of the oxide-dispersion-strengthened alloy MA 6000E has been studied in the temperature range 1144-1366 K, with strain rates ranging from 2.1 x 10 to the -5th to 2.1 x 10 to the -7th per s. It is found that the inherent strength of the alloy is essentially the same in all test directions and that the low strength observed in tensile tests results from the inability of grain boundaries to support high tensile stresses. The failure of MA 6000E under high-temperature, slow plastic flow conditions is shown to be the result of concentrated slip. Slow plastic deformation in MA 6000E can be described by a threshold stress model of creep where threshold stresses are calculated from relatively fast testing procedures and the effective stress exponent for creep is assumed to be 3.5.

Whittenberger, J. D.↗
NASA NTRS2018

Evaluating Expected Performance and Graceful Degradation in Distributed Spacecraft Missions

Distributed Spacecraft Missions (DSMs) have largely garnered interest due to lower cost and new technical capabilities. However, another important attribute in DSMs is the potential of graceful degradation where a failure of one or more spacecraft (or instruments) in the DSM can reduce total performance, but the remaining functional spacecraft can maintain a limited science return. The potential for retaining some mission value in the event of partial failures leads to enhanced lifetime value. Here, an approach is developed to analyze graceful degradation and performance of DSM used for Earth observation. The system performance is defined through metrics of coverage and average revisit time of points of interest. Graceful degradation is quantified through total change and rate of change in performance metrics with increasing sub-system failures over the lifetime of a mission. An Expected Performance measure is formulated for conducting comparison of DSM architectures for early stage conceptual mission design and trade studies.

Distributed Spacecraft Missions↗
NASA NTRS2018

Evaluating Expected Performance and Graceful Degradation in Distributed Spacecraft Missions

Distributed Spacecraft Missions (DSMs) have largely garnered interest due to lower cost and new technical capabilities. However, another important attribute in DSMs is the potential of graceful degradation where a failure of one or more spacecraft (or instruments) in the DSM can reduce total performance, but the remaining functional spacecraft can maintain a limited science return. The potential for retaining some mission value in the event of partial failures leads to enhanced lifetime value. Here, an approach is developed to analyze graceful degradation and performance of DSM used for Earth observation. The system performance is defined through metrics of coverage and average revisit time of points of interest. Graceful degradation is quantified through total change and rate of change in performance metrics with increasing sub-system failures over the lifetime of a mission. An Expected Performance measure is formulated for conducting comparison of DSM architectures for early stage conceptual mission design and trade studies.

Distributed Spacecraft Missions; constellations; p↗
NASA NTRS2013

Destructive Single-Event Failures in Diodes

In this summary, we have shown that diodes are susceptible to destructive single-event effects, and that these failures occur along the guard ring. By determining the last passing voltages, a safe operating area can be derived. By derating off of those values, rather than by the rated voltage, like what is currently done with power MOSFETs, we can work to ensure the safety of future missions. However, there are still open questions about these failures. Are they limited to a single manufacturer, a small number, or all of them? Is there a threshold rated voltage that must be exceeded to see these failures? With future work, we hope to answer these questions. In the full paper, laser results will also be presented to verify that failures only occur along the guard ring.

Casey, Megan C.↗
NASA NTRS1972

Analyses of flight model spacecraft performance during thermal-vacuum tests

Malfunction data from the thermal-vacuum tests of 39 flight-model spacecraft were analyzed. The results are interpreted in terms of the test variables, and in terms of the spacecraft performance. The malfunction data are correlated with the test time as a single variable, and also with the composite variable of time plus temperature. The improvement in spacecraft performance is examined by means of malfunction rates, malfunctions per spacecraft, and the probability of no failure related to test time. The minimum thermal-vacuum test profile required for Goddard Space Flight Center spacecraft is verified, and the probability of a defect remaining undetected is estimated.

Timmins, A. R.↗
NASA NTRS1973

Analyses of flight model spacecraft performance during thermal-vacuum tests

Malfunction data from the thermal-vacuum tests of 39 flight-model spacecraft have been analyzed. The results are interpreted in terms of the test variables and the spacecraft performance. The malfunction data are correlated with the test time as a single variable, and also with the composite variable of time plus temperature. The improvement in spacecraft performance is examined by means of malfunction rates, malfunctions per spacecraft, and the probability of no failure related to test time. The minimum thermal-vacuum test profile required for Goddard Space Flight Center spacecraft is verified, and the probability of a defect remaining undetected is estimated.

Timmins, A. R.↗
NASA NTRS1976

Water vapor diffusion membranes, 2

Transport mechanisms were investigated for the three different types of water vapor diffusion membranes. Membranes representing porous wetting and porous nonwetting structures as well as dense diffusive membrane structures were investigated for water permeation rate as a function of: (1) temperature, (2) solids composition in solution, and (3) such hydrodynamic parameters as sweep gas flow rate, solution flow rate and cell geometry. These properties were measured using nitrogen sweep gas to collect the effluent. In addition, the chemical stability to chromic acid-stabilized urine was measured for several of each type of membrane. A technology based on the mechanism of vapor transport was developed, whereby the vapor diffusion rates and relative susceptibility of membranes to fouling and failure could be projected for long-term vapor recovery trials using natural chromic acid-stabilized urine.

Holland, F. F.↗
NASA NTRS1972

Longitudinal handling qualities during approach and landing of a powered lift STOL aircraft

Longitudinal handling qualities evaluations were conducted on the Ames Research Center Flight Simulator for Advanced Aircraft (FSAA) for the approach and landing tasks of a powered lift STOL research aircraft. The test vehicle was a C-8A aircraft modified with a new wing incorporating internal blowing over an augmentor flap. The investigation included: (1) use of various flight path and airspeed control techniques for the basic vehicle; (2) assessment of stability and command augmentation schemes for pitch attitude and airspeed control; (3) determination of the influence of longitudinal and vertical force coupling for the power control; (4) determination of the influence of pitch axis coupling with the thrust vector control; and (5) evaluations of the contribution of stability and command augmentation to recovery from a single engine failure. Results are presented in the form of pilot ratings and commentary substantiated by landing approach time histories.

Franklin, J. A.↗
NASA NTRS1981

Photometric and CCD direct image observation of comet Encke

Attempted detection of periodic variations in brightness of the comet Encke is described. Viewing problems due to the position, faintness, and rate of motion of the comet are discussed. The failure of attempts to perform photoelectric photometry and CCD imaging is described. Photometric observations of the prototype Earth crosser, (1862) Apollo, are described and a photoelectric light curve of observations made during a four-hour period is presented.

Mccrosky, R. E.↗
NASA NTRS1979

Flocculation of colloidal sols: Diffusion-controlled vs agitation-induced flocculation

A proposal for carrying out flocculation experiments in microgravity is presented. These experiments might allow a correlation between theory and experiment. First, all particles, whether single primary particles or aggregates of primary particles would not settle or cream at any agitation rate, or even in the absence of agitation. This failure to separate would keep all aggregates active, still serving as centers for diffusion-controlled flocculation. Keeping all particles suspended would allow the possibility of determining the total number of particles as a function of time from beginning to end of flocculation. Finally, the experiments would allow a definite separation diffusion-controlled and agitation-induced flocculation by studying diffusion-controlled flocculation with and without agitation.

Source record↗
NASA NTRS1984

Estimating the Lifetimes of Nickel/Cadmium Cells

Equation based on model of flaw growth. Model assumes cell fails by growth of preexisting flaws. Flaws described by three important quantities: total number of flaws, distribution of flaw sizes and rate of flaw growth. When flaw reaches critical size failure occurs. Flaw concept, in addition to providing ready explanation for reduced lifetime, predicts two important charateristics: statistical variability of lifetime data and dependence of lifetime on volume of sample.

Fedors, R. F.↗
NASA NTRS1985

Technology research for strapdown inertial experiment and digital flight control and guidance

A helicopter flight-test program to evaluate the performance of Honeywell's Tetrad - a strapdown, laser gyro, inertial navitation system is discussed. The results of 34 flights showed a mean final navigational velocity error of 5.06 knots, with a standard deviation of 3.84 knots; a corresponding mean final position error of 2.66 n.mi., with a standard deviation of 1.48 n.m.; and a modeled mean-position-error growth rate for the 34 tests of 1.96 knots, with a standard deviation of 1.09 knots. Tetrad's four-ring laser gyros provided reliable and accurate angular rate sensing during the test program and on sensor failures were detected during the evaluation. Criteria suitable for investigating cockpit systems in rotorcraft were developed. This criteria led to the development of two basic simulators. The first was a standard simulator which could be used to obtain baseline information for studying pilot workload and interactions. The second was an advanced simulator which integrated the RODAAS developed by Honeywell into this simulator. The second area also included surveying the aerospace industry to determine the level of use and impact of microcomputers and related components on avionics systems.

Carestia, R. A.↗
NASA NTRS1986

Engineering Voyager 2's encounter with Uranus

Changes made by radio control from the ground in the Voyager 2 spacecraft as it approached Uranus are described. Reduced power required that subsystems and heaters had to be switched on and off in carefully synchronized fashion. Low light levels required increased exposure times, so the jiggling of the spacecraft had to be minimized. Coding changes were made and image data were compressed to cope with the reduced bit rate at larger distances. Successful efforts to cope with failures in the primary radio receiver and in the computer instructions for image compression are described, as are changes made on the ground in the spacecraft navigation.

Laeser, Richard P.↗
NASA NTRS1989

Effect Of Solidification Speed On Fatigue Properties

Fast solidification increases fatigue life, but failure distribution becomes less predictable. Report describes effects of rate of solidification on nickel-based super-alloy MAR-M246(Hf) used in turbine blades. Based on experiments in which specimens directionally solidified at 5 cm/h and 30 cm/h, then tested for high cycle fatigue. Specimens also inspected by energy-dispersive x-ray (EDX) analysis and optical and electron microscopy.

Mccay, M. H.↗
NASA NTRS1996

RAID Disk Arrays for High Bandwidth Applications

High bandwidth applications require large amounts of data transferred to/from storage devices at extremely high data rates. Further, these applications often are 'real time' in which access to the storage device must take place on the schedule of the data source, not the storage. A good example is a satellite downlink - the volume of data is quite large and the data rates quite high (dozens of MB/sec). Further, a telemetry downlink must take place while the satellite is overhead. A storage technology which is ideally suited to these types of applications is redundant arrays of independent discs (RAID). Raid storage technology, while offering differing methodologies for a variety of applications, supports the performance and redundancy required in real-time applications. Of the various RAID levels, RAID-3 is the only one which provides high data transfer rates under all operating conditions, including after a drive failure.

Moren, Bill↗
NASA NTRS1995

Quantification of scaling exponents and crossover phenomena in nonstationary heartbeat time series

The healthy heartbeat is traditionally thought to be regulated according to the classical principle of homeostasis whereby physiologic systems operate to reduce variability and achieve an equilibrium-like state [Physiol. Rev. 9, 399-431 (1929)]. However, recent studies [Phys. Rev. Lett. 70, 1343-1346 (1993); Fractals in Biology and Medicine (Birkhauser-Verlag, Basel, 1994), pp. 55-65] reveal that under normal conditions, beat-to-beat fluctuations in heart rate display the kind of long-range correlations typically exhibited by dynamical systems far from equilibrium [Phys. Rev. Lett. 59, 381-384 (1987)]. In contrast, heart rate time series from patients with severe congestive heart failure show a breakdown of this long-range correlation behavior. We describe a new method--detrended fluctuation analysis (DFA)--for quantifying this correlation property in non-stationary physiological time series. Application of this technique shows evidence for a crossover phenomenon associated with a change in short and long-range scaling exponents. This method may be of use in distinguishing healthy from pathologic data sets based on differences in these scaling properties.

NASA Discipline Number 14-10↗