SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This is the AmeriFlux version of the carbon flux data for the site US-Mi1 LTAR UCB (Upper Chesapeake Bay) Miscanthus 1. Site Description - This Farm was a privately owned farm in Ohio Leased to Aloterra Energy Corporation out of Texas, The crop was Miscanthus grown continually originally for alternative Ethanol production but eventually for fiber as absorbant material. Miscanthus grows upwards of 15 ft tall each year.
This is the AmeriFlux version of the carbon flux data for the site US-Mi2 LTAR UCB (Upper Chesapeake Bay) Miscanthus 2. Site Description - This Farm was a privately owned farm in Ohio Leased to Aloterra Energy Corporation out of Texas, The crop was Miscanthus grown continually originally for alternative Ethanol production but eventually for fiber as absorbant material. Miscanthus grows upwards of 15 ft tall each year.
This is the AmeriFlux version of the carbon flux data for the site US-Mi3 LTAR UCB (Upper Chesapeake Bay) Miscanthus 3. Site Description - This Farm was a privately owned farm in Ohio Leased to Aloterra Energy Corporation out of Texas, The crop was Miscanthus grown continually originally for alternative Ethanol production but eventually for fiber as absorbant material. Miscanthus grows upwards of 15 ft tall each year.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-CF2 CAF-LTAR Cook West. This is the FLUXNET version of the carbon flux data for the site US-CF2 CAF-LTAR Cook West produced by applying the standard ONEFlux (1F) software. Site Description - CF2 has operated since May 2017 at the R.J. Cook Agronomy Farm outside of Pullman, Washington, and monitors the conventionally tilled side of a paired-catchment study that is part of the Longterm Agroecosystem Research (LTAR) site common experiment. CF2 is located in “Cook West,” a field that has been in conventional tillage since prior to 1998 and constitutes the Prevalent treatment of the common experiment. In this case, conventional tillage involves chisel plowing after the winter wheat phase of rotations (approximately every 3-4 years) and occasional harrowing. CF2 is paired with the CF1 tower location in “Cook East,” which has been in no-till since 1998 and represents the Alternative treatment of the common experiment. Both fields are planted in the same crops every year. Cook Agronomy Farm is in the high precipitation agroecological zone of the Columbia Plateau’s dryland cropping region. Crop rotations are wheat-based and include winter wheat, spring wheat, chickpea, spring canola, and winter peas. Wheat is the principal cash crop, with other crops grown in rotation for diversity, nutrient, and pest management. Soils are predominantly silt loam texture Mollisols in the Palouse, Thatuna, Naff soil series. The CF2 tower replaced US-RC2, which operated 2012-2016 in a neighboring field that was also conventionally tilled. CF2 and RC2 have distinct footprints, aspects, and soil series compositions.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-Ro6 Rosemount I18_North. This is the FLUXNET version of the carbon flux data for the site US-Ro6 Rosemount I18_North produced by applying the standard ONEFlux (1F) software. Site Description - This tower is located in a farm field farmed in accordance with a conservation type agricultural practice in the region: a corn/soybean/clover (living mulch/cover crop) rotation with chisel plow tillage in the fall following corn harvest and in the spring following soybeans.
This is the AmeriFlux version of the carbon flux data for the site US-IAB Iowa State University NE tower. Site Description - This is a 4 ha (200 m x 200 m) crop rotation established at the Sustainable Advanced Bioeconomy Research (SABR) farm at Iowa State University. The site has a long history of conventional row-cropping, predominantly corn-soy rotations. In the immediately preceding growing season, soybeans were grown at the SABR farm.
This is the AmeriFlux version of the carbon flux data for the site US-IAM Iowa State University Miscanthus. Site Description - This is a 4 ha (200 m x 200 m) Miscanthus established at the Sustainable Advanced Bioeconomy Research (SABR) farm at Iowa State University. The site has a long history of conventional row-cropping, predominantly corn-soy rotations. In the immediately preceding growing season, soybeans were grown at the SABR farm.
This is the AmeriFlux version of the carbon flux data for the site US-IAC Iowa State University SE tower. Site Description - This is a 4 ha (200 m x 200 m) sorghum-corn-soybean rotation established at the Sustainable Advanced Bioeconomy Research (SABR) farm at Iowa State University. The site has a long history of conventional row-cropping, predominantly corn-soy rotations. In the immediately preceding growing season, soybeans were grown at the SABR farm.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-IAM Iowa State University Miscanthus. This is the FLUXNET version of the carbon flux data for the site US-IAM Iowa State University Miscanthus produced by applying the standard ONEFlux (1F) software. Site Description - This is a 4 ha (200 m x 200 m) Miscanthus established at the Sustainable Advanced Bioeconomy Research (SABR) farm at Iowa State University. The site has a long history of conventional row-cropping, predominantly corn-soy rotations. In the immediately preceding growing season, soybeans were grown at the SABR farm.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-IAB Iowa State University NE tower. This is the FLUXNET version of the carbon flux data for the site US-IAB Iowa State University NE tower produced by applying the standard ONEFlux (1F) software. Site Description - This is a 4 ha (200 m x 200 m) crop rotation established at the Sustainable Advanced Bioeconomy Research (SABR) farm at Iowa State University. The site has a long history of conventional row-cropping, predominantly corn-soy rotations. In the immediately preceding growing season, soybeans were grown at the SABR farm.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-IAC Iowa State University SE tower. This is the FLUXNET version of the carbon flux data for the site US-IAC Iowa State University SE tower produced by applying the standard ONEFlux (1F) software. Site Description - This is a 4 ha (200 m x 200 m) sorghum-corn-soybean rotation established at the Sustainable Advanced Bioeconomy Research (SABR) farm at Iowa State University. The site has a long history of conventional row-cropping, predominantly corn-soy rotations. In the immediately preceding growing season, soybeans were grown at the SABR farm.
This proposal will develop a new racking / mounting system combined with a new agriculture-tuned luminescent solar panel for low cost high tunnel implementation to produce both crops and electricity for small local farms. Crop trials performed under this specialized panel/racking system can be extended to open field agriculture with standard utility scale racking system in phase II. The US agricultural industry uses about 300 billion KW-hr of energy / year. Of this energy consumption, roughly 20% goes towards food production and 20% goes towards food processing. This proposal will allow farm land to simultaneously generate electricity, food AND provide jobs. Employment is one of the largest hurdles for the introduction of solar into rural areas. The ability to provide agricultural jobs in addition to solar energy from a plot of land will pave the way for greater adoption of photovoltaics in rural areas. A cost effective and highly durable hybrid power generating high tunnel greenhouse will be developed that generates electricity at less than $2.50/watt INSTALLED cost and can be used for crop production of high values crops. The high tunnel will use a new design of Soliculture greenhouse integrated luminescent solar panels to selectively absorb the green portion of the solar spectrum that is not used by plants and convert the light to red light with higher photosynthetic efficiency and to enhance power output of solar cells. Green light is selectively downshifted to red light using luminescent materials that match the photosythetically active region for plants and the efficiency maximum of Si photovoltaic cells. The color tuning associated with converting green light to red light has been shown to facilitate fruit production in commercial greenhouses growing cucumbers, lettuce and herbs.
The goal of the ExaWind project is to enable predictive simulations of wind farms comprised of many megawatt-scale turbines situated in complex terrain. Predictive simulations will require computational fluid dynamics (CFD) simulations for which the mesh resolves the geometry of the turbines and captures the rotation and large deflections of blades. Whereas such simulations for a single turbine are arguably petascale class, multi-turbine wind farm simulations will require exascale-class resources. The primary physics codes in the ExaWind project are Nalu-Wind, which is an unstructured-grid solver for the acoustically incompressible Navier-Stokes equations, and OpenFAST, which is a whole-turbine simulation code. The Nalu-Wind model consists of the mass-continuity Poisson-type equation for pressure and a momentum equation for the velocity. For such modeling approaches, simulation times are dominated by linear-system setup and solution for the continuity and momentum systems. For the ExaWind challenge problem, the moving meshes greatly affect overall solver costs as reinitialization of matrices and recomputation of preconditioners is required at every time step. In this report we evaluated GPU-performance baselines for the linear solvers in the Trilinos and hypre solver stacks using two representative Nalu-Wind simulations: an atmospheric boundary layer precursor simulation on a structured mesh, and a fixed-wing simulation using unstructured overset meshes. Both strong-scaling and weak-scaling experiments were conducted on the OLCF supercomputer Summit and similar proxy clusters. We focused on the performance of multi-threaded Gauss-Seidel and two-stage Gauss-Seidel that are extensions of classical Gauss-Seidel; of one-reduce GMRES, a communication-reducing variant of the Krylov GMRES; and algebraic multigrid methods that incorporate the afore-mentioned methods. The team has established that AMG methods are capable of solving linear systems arising from the fixed-wing overset meshes on CPU, a critical intermediate result for ExaWind FY20 Q3 and Q4 milestones. For the fixed-wing strong-scaling study (model with 3M grid-points), the team identified that Nalu-Wind simulations with the new Trilinos and hypre solvers scale to modest GPU counts, maintaining above 70% efficiency up to 6 GPUs. However, there still remain significant bottlenecks to performance: matrix assembly (hypre), AMG setup (hypre and Trilinos) In the weak-scaling experiments (going from 0.4M to 211M gridpoints), it's shown that the solver apply phases are faster on GPUs, but that Nalu-Wind simulation times grow, primarily due to the multigrid-setup process. Finally, based on the report outcomes, we propose a linear solver path-forward for the remainder of the ExaWind project. Near term, the NREL team will continue their work on GPU-based linear-system assembly. They will also investigate how the use of alternatives to the NVIDIA UVM (unified virtual memory) paradigm affects performance. Longer term, the NREL team will evaluate algorithmic performance on other types of accelerators and merge their improvements back to the main hypre repository branch. Near term, the Trilinos team will address performance bottlenecks identified in this milestone, such as implementing a GPU-based segregated momentum solve and reusing matrix graphs across linear-system assembly phases. Longer term, the Trilinos team will do detailed analysis and optimization of multigrid setup.
Washington River Protection Solutions (WRPS) conducted tests on two types of chemical cartridges for use in air purifying respirators (APR) to determine the period of time that the cartridges would provide adequate performance1 to protect workers when exposed to a mixture of Chemicals of Potential Concern (COPCs) from vapors emanating from the headspace of tank A-101 on the Hanford Site. The Occupational Safety and Health Administration (OSHA) identifies cartridge testing as a valid approach for establishing a cartridge change schedules.[3] Testing is commonly applied in situations where mixtures of COPCs exist, and where other approaches, such as manufacturer recommendations and modeling, are less reliable. The tests were designed and conducted to ensure measurement and/or control of the key variables OSHA identified as important to estimate cartridge service life, including temperature, humidity, COPC concentration, breathing rate, and cartridge adsorption capacity. Testing was conducted over a period from July 22-24, 2016, using headspace vapors from Hanford tank A-101 under static conditions2 fed to a respirator cartridge test stand developed by WRPS in collaboration with HiLine Engineering (Richland, Washington). Multipurpose respirator cartridges, SCOTT 7422-SD1 and 7422-SC1 (SCOTT Safety, Monroe, North Carolina) were assessed on separate days with A-101 headspace vapors. Sample media (sorbent tubes) were used to collect samples of the vapor stream entering and exiting the respirator cartridge, and were subsequently analyzed for COPC concentrations. Pacific Northwest National Laboratory was tasked with conducting an independent analysis of the analytical results and making recommendations based on the results for respiratory cartridge performance and service life. Key conclusions from the assessment of the 59 COPCs in this study are described below: • Based on d measured cartridge inlet vapor concentrations from tank A-101 headspace, both ammonia and N-Nitrosodimethylamine (NDMA) exceeded their Occupational Exposure Limits (OEL).3 These measurements were generally consistent with maximum A-101 headspace measurements previously obtained for these two compounds. • Ammonia had respirator cartridge outlet concentrations that exceeded 10% of the OEL for both cartridges tested, indicating breakthrough for each. For the SCOTT 7422-SD1 cartridge, ammonia appeared to breakthrough above 10% of its OEL after 2 hours. For the SCOTT 7422-SC1 cartridge, ammonia breakthrough appeared to occur after 8 hours. 1 “Adequate performance” refers to the breakthrough criteria used in this analysis—that is, sustained cartridge outlet concentrations above 10% of the OEL. For some COPCs, an alternate threshold has been applied when necessary due to higher detection limit (DL)/reporting limit (RL) values for specific compounds. Ultimately, Industrial Hygiene professionals will use these results along with specific hazard assessments to determine service life and cartridge use that provides the necessary performance. 2 These tests were conducted under static conditions absent waste-disturbing activities in the subject tank or tank farm. 3 Occupational Exposure Limits accepted for Hanford Tank Farm use are based on OELs established by a U.S. governmental agency or national professional organization (e.g., OSHA, National Institute for Occupational Safety and Health, American Conference of Governmental Industrial Hygienists), or if no U.S. OEL exists, standard toxicological practices are applied to develop OELs using non-U.S. exposure limits, other established OELs for chemical surrogates when available, or other standard procedures. The OEL for NDMA was established in 2005 based on the MAK (Maximale Arbeitsplatzkonzentration) Commission standard adopted in Europe. iv • Despite respirator inlet measurements for NDMA that were in excess of its OEL, all corresponding outlet measurements, from both respirator cartridges, were below analytical DL 1 for the
This project built on the success of Global Algae Innovations Algae Biomass Yield Phase 1 project to accelerate the commercialization of algal biofuels through development of an integrated, economical, photosynthetic, open raceway system to produce algal oil. Two parallel pathways to a biofuel were investigated. In the algal crude oil pathway, highlighted in blue, the dewatered algal biomass slurry is used as a feed to hydrothermal liquefaction to produce an algae crude oil and recycle aqueous stream. In the algal lipid oil pathway, highlighted in green, the algal biomass slurry is dried, and the oil is extracted to produce an algal lipid oil biofuel intermediate and a high protein algae meal co-product. Upgrading to drop-in fuels has been demonstrated for the biofuel intermediates in both pathways. Since the algal lipid oil pathway requires lipid accumulation, the productivity is generally lower than the algal crude oil pathway, but the required productivity for economical algal biofuel production is also lower because the coproduct value is greater. The outdoor cultivation was performed at the Kauai Algae Farm. The project team has expertise across the full breadth strain development, advanced algal cultivation, open raceway contamination control, CO 2 supply, harvesting, dewatering, extraction, hydrothermal liquefaction, technoeconomic analysis and life cycle analysis: Hildebrand laboratory at Scripps Institution of Oceanography – diatom strain development. Mayfield laboratory at UCSD - green algae strain development. TSD Management Associates- CO 2 supply, algal harvesting and dewatering, and algal drying and extraction. Qualitas - large-scale test site for algal harvesting technology. Texas A&M University - algal drying and extraction technology. Pacific Northwest National Laboratory - hydrothermal liquefaction technology. GE Water and Power - membrane technology. National Renewable Energy Laboratory - algal techno-economic analysis. Phase 1 of the project resulted in tremendous productivity and pre-processing improvements in an integrated, large-scale, low-cost cultivation and pre-processing process that moved algal technology closer to economic viability for biofuels than ever before. Phase 2 accomplishments further facilitate development of a commercial algal biofuel industry by adding: several top performing strains and strain development tools including breeding; open-pond cultivation innovations that achieved a 30% improvement in overall productivity, an 83% reduction in cost, and a 95% reduction in energy use relative to conventional technology; further improvements in harvesting that led to the Zobi harvester ® as a universal, economical, low energy, commercially available microalgae harvesting solution; breakthroughs in drying and extraction including a new low energy drying process and several new low energy extraction unit operations that together with the Zobi harvester ® achieve a 90% reduction in cost and 97% reduction in energy use relative to conventional technology. These improvements are sufficient to enable economical production of algae biofuel and protein meal co-product if the process were scaled up to a commercial-scale 5,000-acre algae farm.
SRS is proceeding with closure of the H-Area Tank Farm (HTF) and F-Area Tank Farm (FTF). Closure consists of removing the bulk waste, heel removal, and filling the tank with tailored grout formulations. The long-term performance of the concrete and steel materials of construction and the closure grout is an important consideration for Performance Assessment (PA) of closed tanks in FTF and HTF. Over PA timeframes of hundreds, thousands, to tens of thousands of years, the chemical and physical properties of the concrete and steel materials will slowly degrade due to environmental exposure and material aging. In the interim these materials will provide a barrier to the leaching of radionuclides into the soil. Savannah River Remediation (SRR) is updating relevant portions of these analysis inputs to support an imminent revision to the HTF PA and a future update to the FTF PA. This analysis provides an update to the previous PA inputs for steel corrosion. The Central Scenario for the PA analysis includes three postulated modeling cases: 1) Realistic Case, 2) Compliance Case, and 3) Pessimistic Case. This analysis also included a Fast Flow Path Case. This latter case considered the circumstance where the initial condition of the concrete was a completely degraded state and that grout shrinkage exposed the steel to the soil environment immediately. In effect, the steel was unprotected by the concrete and grout. The cases have various degrees of conservatism considered. Chemical, physical and tank configuration parameters were investigated to understand their effects on the predicted time to release of the contaminants. The assessment reviewed the initial tank and steel configuration, service life degradation of the steel, and potential corrosion mechanisms associated with degradation of the concrete materials.
The Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) processes radioactive High Level Waste (HLW) sludge solids from the Concentration, Storage, and Transfer Facilities (CSTF); which includes the SRS Tank Farm and Evaporator facilities, and a concentrated Cs-137 laden stream and a Monosodium Titanate (MST) and sludge solids stream from the SRS Salt Waste Processing Facility (SWPF). The waste is chemically adjusted with acids and reductant (currently with 50 wt.% nitric acid and ~90 wt.% formic acid, but eventually formic acid will be substituted with ~70 wt.% glycolic acid), and frit is added so that a durable, borosilicate glass waste form can be produced when the material is vitrified in the melter. As a result of the evaporation of water during both the melter feed preparation and the melter feed vitrification steps in DWPF, a recycle waste stream is generated, neutralized, and sent back to the CSTF. The recycle waste is a dilute aqueous stream originating from the collection of condensate liquids containing some minor sludge, MST, and frit solids and other waste components resulting from melter feed entrainment during foamover events and transfer of volatile species into the condensate. The recycle stream volume is significant and is expected to approach 3 million gallons per year once SWPF reaches full operation, requiring the use of multiple large CSTF tanks for storage. The recycle waste is currently collected in the SRS Tank Farm and periodically evaporated in the 242-16H (2H) Evaporator to conserve storage space.
Nitrate form anion exchange resins are specifically prohibited for disposal in TRU waste. At some DOE sites, spent resin was mixed with cement to immobilize the resin in a monolith with varying success. At SRS starting in the 1980s, spent anion resin has generally been converted to a more chemically stable form or it was digested with permanganate and transferred as a slurry to the HLW tank farm. In the early years of the site it is reported that over 20 metric tons of organic resin were transferred directly to the tank farm without any attempt to digest it. It appears that in the future conversion to a stable sulfate form could well be the favored disposal path for spent nitrate-form anion resin. This report will document the site history of converting between ionic forms (nitrate to sulfate) and will document process flowsheet conditions for performing that conversion.