Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FAIR data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Satellite Radar Interferometry for Monitoring Ice-Sheet Motion: Application to an Antarctic Ice Stream

As a new means of monitoring the flow velocities and grounding-line positions of ice streams, which are indicators of response of the Antarctic and Greenland ice sheets to climatic change or internal instability, the method of satellite radar interferometry (SRI) is here proposed and applied to the Rutford Ice Stream, Antarctica. The method uses phase comparison of the radar signal obtained for a pair of SAR images taken a few days apart to plot an interferogram which directly displays relative ground motions that have occurred in the time interval between images. The detection limit is about 1.5 mm for vertical motions and about 4 mm for horizontal motions in the radar beam direction. In the Rutford Ice Stream, SRI velocities agree fairly well with earlier ground-truth data over a longitudinal interval of 29 km; the comparison suggests a secular decrease in velocity of about 2 percent from 1978-80 to 1992...

Goldstein, R. M.↗

Measurement and Control of Oxygen Partial Pressure in an Electrostatic Levitator

Recently the NASA Marshall Space Flight Center electrostatic levitation (ESL) laboratory has been upgraded to include an oxygen control system. This system allows the oxygen partial pressure within the vacuum chamber to be measured and controlled, at elevated temperatures, theoretically in the range from 10(exp -36) to 10(exp 0) bar. The role of active surface agents in liquid metals is fairly well known; however, published surface tension data typically has large scatter, which has been hypothesized to be caused by the presence of oxygen. The surface tension of metals is affected by even a small amount of adsorption of oxygen. It has even been shown that oxygen partial pressures may need to be as low as 10(exp -24) bar to avoid oxidation. While electrostatic levitation is done under high vacuum, oxide films or dissolved oxygen may have significant effects on materials properties, such as surface tension and viscosity. Therefore, the ability to measure and control the oxygen partial pressure within the chamber is highly desirable. The oxygen control system installed at MSFC contains a potentiometric sensor, which measures the oxygen partial pressure, and an oxygen ion pump. In the pump, a pulse-width modulated electric current is applied to yttrium-stabilized zirconia, resulting in oxygen transfer into or out of the system. Also part of the system is a control unit, which consists of temperature controllers for the sensor and pump, PID-based current loop for the ion pump, and a control algorithm. This system can be used to study the effects of oxygen on the thermophysical properties of metals, ceramics, glasses, and alloys. It can also be used to provide more accurate measurements by processing the samples at very low oxygen partial pressures. The oxygen control system will be explained in more detail and an overview of its use and limitations in an electrostatic levitator will be described. Some preliminary measurements have been made, and the results to date will be provided.

SanSoucie, Michael P.↗

When the Sky Falls: Performing Initial Assessments of Bright Atmospheric Events

The 2013 Chelyabinsk super bolide was the first "significant" impact event to occur in the age of social media and 24 hour news. Scientists, used to taking many days or weeks to analyze fireball events, were hard pressed to meet the immediate demands (within hours) for answers from the media, general public, and government officials. Fulfilling these requests forced many researchers to exploit information available from various Internet sources - videos were downloaded from sites like Youtube, geolocated via Google Street View, and quickly analyzed with improvised software; Twitter and Facebook were scoured for eyewitness accounts of the fireball and reports of meteorites. These data, combined with infrasound analyses, enabled a fairly accurate description of the Chelyabinsk event to be formed within a few hours; in particular, any relationship to 2012 DA14 (which passed near Earth later that same day) was eliminated. Results of these analyses were quickly disseminated to members of the NEO community for press conferences and media interviews. Despite a few minor glitches, the rapid initial assessment of Chelyabinsk was a triumph, permitting the timely conveyance of accurate information to the public and the incorporation of social media into fireball analyses. Beginning in 2008, the NASA Meteoroid Environments Office, working in cooperation with Western's Meteor Physics Group, developed processes and software that permit quick characterization - mass, trajectory, and orbital properties - of fireball events. These tools include automated monitoring of Twitter to establish the time of events (the first tweet is usually no more than a few seconds after the fireball), mining of Youtube and all sky camera web archives to locate videos suitable for analyses, use of Google Earth and Street View to geolocate the video locations, and software to determine the fireball trajectory and object orbital parameters, including generation of animations suitable for popular media and presentations. This presentation will give a short description of the characterization procedure and show applications of the tools, which have become vital to answering the question of "What was that bright light in the sky?" in the post-Chelyabinsk, 24/7 news world.

Cooke, William J.↗

Incorporating Experience Curves in Appliance Standards Analysis

The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The NASA Open Science Data Repository: Biomedical Data, Analysis Tools, and Informatic Collaborations

Increased biomedical risks and challenges associated with deep space missions require knowledge discovery, health countermeasures, and biomedical support capabilities. Maximally open-access and reusable data is needed by developers, scientists, and engineers to develop these systems. The NASA Open Science Data Repository (OSDR) is a maximally open access and FAIR database (ie., findable, accessible, interoperable, and reusable), and meets various scientific, technical, and operational needs. It offers users and submitters the ability to upload, download, search, share, analyze, cite, and visualize data across ‘omics, physiological, phenotypic, payload, hardware, behavioral, bioimaging, video, and environmental monitoring telemetry datasets. OSDR is an expanded database, based upon the successes of NASA GeneLab. OSDR has >460 studies with datasets covering model organisms to non-NASA human astronauts. There are ~12 datasets from the Inspiration 4 (I4) mission, spanning metagenomics, comprehensive metabolic panels, clonal hematopoiesis, spatial transcriptomics, proteomics, and cytokine panels. In the interest of data privacy, two I4 datasets with raw files relating to the epitranscriptome, and a new request feature is live in OSDR (with a backend review process established) developed from industry norms. OSDR is collecting and curating biomedical human data from a new sub-orbital research flight and is open to more space life science/biomedical submissions from the international and commercial sectors. OSDR also recently began a collaboration with the European Space Agency (ESA) to collect and curate >200 terabytes of human and model organism data. The OSDR submission portal is designed to ingest and curate ~25 ‘omics and ~50 physiological-phenotypic-imaging assay data types. Tools available for OSDR users include: 1) an Environmental Data Application to compare radiation, CO2, relative humidity, temperature, and other telemetry across missions and subjects, 2) the RadLab database, a collaboration between NASA, ESA, the German and Italian Space Agencies, and the Bulgarian Academy of Sciences, and 3) a Multi-study visualization tool which enables users to look across and combine ‘omics datasets. There are ~600 volunteer OSDR Analysis Working Group (AWG) members providing feedback on scientific data/metadata standards and collaborating to mine-reuse OSDR in research. OSDR/GeneLab has enabled ~60 publications reusing data as of October 2023.

space biology↗

The application of noncoherent Doppler data types for Deep Space Navigation

Recent improvements in computational capability and DSN technology have renewed interest in examining the possibility of using one-way Doppler data alone to navigate interplanetary spacecraft. The one-way data can be formulated as the standard differenced-count Doppler or as phase measurements, and the data can be received at a single station or differenced if obtained simultaneously at two stations. A covariance analysis, which analyzes the accuracy obtainable by combinations of one-way Doppler data, is performed and compared with similar results using standard two-way Doppler and range. The sample interplanetary trajectory used was that of the Mars Pathfinder mission to Mars. It is shown that differenced one-way data are capable of determining the angular position of the spacecraft to fairly high accuracy, but have relatively poor sensitivity to the range. When combined with single-station data, the position dispersions are roughly an order of magnitude larger in range and comparable in angular position as compared to dispersions obtained with standard two-way data types. It was also found that the phase formulation is less sensitive to data weight variations and data coverage than the differenced-count Doppler formulation.

Bhaskaran, S.↗

Moisture transports and budgets of 'moisture bursts'

The paper discusses moisture fluxes and budgets associated with a pair of 'moisture bursts' in the eastern North Pacific Ocean area, described by Smith et al. (1985). The moisture fluxes were calculated using data obtained during the first Special Observing Period (SOP-1) of the FGGE. The area specifically examined extended from the equator to the latitude 20 deg N and from longitude 180 deg to 100 deg W, with concentration on the region south and southeast of the Hawaiian Islands. From the comparison of the calculations based on dropwindsonde and radiosonde data and reports from commercial and military aircraft, it is concluded that the calculations of water vapor flow across latitude lines probably provide a fair representation of reality, especially when based on the dropwindsonde data. However, water vapor flow out of small volumes is not well represented by the results from either data.

Thompson, A. H.↗

INCREASING THE TRANSPARENCY AND REPRODUCIBILITY OF SPACE RADIATION SCIENCE: THE RADIATION BIOLOGY ONTOLOGY

Among the primary objectives of the Open/Open-Source Science paradigm are making scientific investigation data transparent and results reproducible [1], objectives shared by the FAIR principles [2]. To accomplish this, the conceptual framework that includes all the investigation objects needs to be accurately captured and communicated to all data consumers. A large part of this requires using metadata standards to annotate data collected. These standards should be readily accessible, informed by scientific community consensus and sufficiently specific to encompass all of the important aspects of the investigation. Starting in 2020 we have been co-leading an open consortium to develop a new metadata standard, the Radiation Biology Ontology (RBO), through the Open Biological and Biomedical Ontologies (OBO) Foundry [3]. We began by transforming many of the terms from the National Council on Radiation Protection and Measurement into concepts that can be formally related to existing OBO Foundry classes or attributes. We then identified and imported into the RBO existing OBO Foundry classes that have obvious relevance for radiation biomedicine (for example, concepts from the Environment Ontology that describe radiative processes, and concepts from the Gene Ontology dealing with molecular and cellular responses to radiation). Finally, we scrutinized datasets from investigations of radiation effects held in NASA GeneLab and LSDA repositories and added additional classes, instances, and attributes into the RBO that should be used to annotate these data. We developed the RBO using the open-source tools of GitHub and publish the RBO periodically through the NIH/NCBI BioPortal website, so systems worldwide can leverage the knowledge it contains [4]. This initial phase of concept modeling has yielded an RBO that at present has more than 300 declared concepts, with more than 3500 additional concepts imported from other OBO Foundry ontologies. While this first phase has focused on concepts for annotating samples, environments, exposures, and measurements, the next phase will center on supporting annotation of results and findings, such as concept models of molecular, cellular and tissue effects. The value of the RBO will be determined in part by our ability to engage the community in its development, and we have established a Radiobiology Informatics Consortium with unrestricted membership as the owner of the RBO in order to encourage investigators, system owners and other to join in this effort. Anyone can report issues or request new concept modeling or other features directly on GitHub. By using the BioPortal application programming interface, systems can pose dynamic queries to the latest version of the RBO for information on individual classes or entire hierarchies; this design eliminates the need for systems to be updated in order to use newer versions of the RBO. We hope to contribute to the advancement of open radiobiological science through the continued, open development of the RBO, that will provide more precise, machine-interpretable descriptions of investigations, as well as support data meta-analysis through machine learning or other artificial intelligence methods.

knowledge↗

Mars atmospheric phenomena during major dust storms, as measured at surface

Meteorological instrumentation aboard the Viking Mars Landers measures wind, temperature, and pressure. Two global dust storms occurred during northern autumn and winter, observed both by the orbiters and by the landers. The meteorological data from the landers has been analyzed for the period just before first storm arrival to just after second storm arrival, with the objectives of defining the meteorological phenomena during the storm period, determining those associated with storm and dust arrival, and evaluating the effects on synoptic conditions and the general circulation. Times of dust arrival over the sites could be defined fairly closely from optical and pressure (solar tide) data, and dust arrival was also accompanied by changes in diurnal temperature range, temperature maxima, and temperature minima. The arrivals of the storms at Viking Lander 1 were accompanied by significant increases in wind speed and pressure. No such changes were observed at Viking Lander 2. It is possible that surface material could have been raised locally at Viking Lander 1. Throughout the period except for the time following the second dust storm the synoptic picture at Viking Lander 2 was one of eastward moving cyclonic and anticyclonic systems. These disappeared following the second storm, a phenomenon which may be related to the storm.

Ryan, J. A.↗

Elephants Sharing the Highway: Studying TCP Fairness in Large Transfers over High Throughput Links

Escalating bandwidth demand strains high-performance data networks, posing potential performance risks. TCP congestion control algorithms enhance reliability and optimize bandwidth usage. Network performance is influenced by factors such as AQM algorithms and router buffer size. In the context of constrained network resources, understanding how TCP flows share networks and the resulting performance impact is essential. This paper introduces insights into TCP fairness and performance involving a comparison of TCP CUBIC, Reno, Hamilton, and BBR versions 1 and 2 across real-world networks supporting high bandwidths of up to 25 Gbps. The research explores TCP behaviors with AQM algorithms like FIFO, FQ_CODEL, and RED, alongside diverse buffer sizes. Notably, findings reveal that manipulating buffers and queuing methods yields contrasting outcomes based on bandwidth. BBRv2 emerges as a superior fair algorithm, pivotal for swift transfers, particularly in scientific data scenarios. These results provide crucial guidance for future network design, ensuring equitable performance optimization.

Kiran, Mariam↗

A KBase Case Study on Genome-wide Transcriptomics and Plant Primary Metabolism in Sorghum

A better understanding of the genetic and metabolic mechanisms that confer stress resistance and tolerance in plants is key to engineering new crops through advanced breeding technologies. This requires a systems biology approach that builds on a genome-wide understanding of the regulation of gene expression, plant metabolism, physiology and growth. In this study, we examine the response to drought stress in Sorghum, as we leverage the tools for transcriptomics and plant metabolic modeling we have implemented at the U.S. Department of Energy Systems Biology Knowledgebase (KBase). KBase enables researchers worldwide to collaborate and advance research by allowing them to upload private or public data into the KBase Narrative Interface, empowering them to analyze this data using a rich, extensible array of computational and data-analytics tools, and allows them to securely share scientific workflows and conclusions. We demonstrate how to use the current RNA-seq tools in KBase, applicable to both plants and microbes, to assemble and quantify long transcripts and identify differentially expressed genes effectively. More specifically, we demonstrate the utility of the platform by identifying key genes that are differentially expressed during drought-stress in Sorghum bicolor, which is an important sustainable production crop plant. We then show how to use KBase tools to predict the membership of genes in metabolic pathways and examine expression data in the context of metabolic subsystems. We demonstrate the power of the platform by making the data analysis and interpretation available to the biologists in the reproducible, re-usable, point-and-click format of a KBase Narrative thus promoting FAIR (Findable, Accessible, Interoperable and Reusable) guiding principles for scientific data management and stewardship.

59 BASIC BIOLOGICAL SCIENCES↗

A comparison of fatigue life prediction methodologies for rotorcraft

Because of the current U.S. Army requirement that all new rotorcraft be designed to a 'six nines' reliability on fatigue life, this study was undertaken to assess the accuracy of the current safe life philosophy using the nominal stress Palmgrem-Miner linear cumulative damage rule to predict the fatigue life of rotorcraft dynamic components. It has been shown that this methodology can predict fatigue lives that differ from test lives by more than two orders of magnitude. A further objective of this work was to compare the accuracy of this methodology to another safe life method called the local strain approach as well as to a method which predicts fatigue life based solely on crack growth data. Spectrum fatigue tests were run on notched (k(sub t) = 3.2) specimens made of 4340 steel using the Felix/28 tests fairly well, being slightly on the unconservative side of the test data. The crack growth method, which is based on 'small crack' crack growth data and a crack-closure model, also predicted the fatigue lives very well with the predicted lives being slightly longer that the mean test lives but within the experimental scatter band. The crack growth model was also able to predict the change in test lives produced by the rainflow reconstructed spectra.

Everett, R. A., Jr.↗

Progress Towards Fuselage Drag Reduction via Active Flow Control: A Combined CFD and Experimental Effort

A combined computational and experimental effort has been undertaken to study fuselage drag reduction on a generic, non-proprietary rotorcraft fuselage by the application of active ow control. Fuselage drag reduction is an area of research interest to both the United States and France and this area is being worked collaboratively as a task under the United States/France Memorandum of Agreement on Helicopter Aeromechanics. In the first half of this task, emphasis is placed on the US generic fuselage, the ROBIN-mod7, with the experimental work being conducted on the US side and complementary US and French CFD analysis of the baseline and controlled cases. Fuselage simulations were made using Reynolds-averaged Navier-Stokes ow solvers and with multiple turbulence models. Comparisons were made to experimental data for numerical simulations of the isolated fuselage and for the fuselage as installed in the tunnel, which includes modeling of the tunnel contraction, walls, and support fairing. The numerical simulations show that comparisons to the experimental data are in good agreement when the tunnel and model support are included. The isolated fuselage simulations compare well to each other, however, there is a positive shift in the centerline pressure when compared to the experiment. The computed flow separation locations on the rear ramp region had only slight differences with and without the tunnel walls and model support. For the simulations, the flow control slots were placed at several locations around the flow separation lines as a series of eight slots that formed a nearly continuous U-shape. Results from the numerical simulations resulted in an estimated 35% fuselage drag reduction from a steady blowing flow control configuration and a 26% drag reduction for unsteady zero-net-mass flow control configuration. Simulations with steady blowing show a delayed flow separation at the rear ramp of the fuselage that increases the surface pressure acting on the ramp, thus decreasing the overall fuselage pressure drag.

Schaeffler, Norman W.↗

Optoacoustic measurements of water vapor absorption at selected CO laser wavelengths in the 5-micron region

Measurements of water vapor absorption were taken with a resonant optoacoustical detector (cylindrical pyrex detector, two BaF2 windows fitted into end plates at slight tilt to suppress Fabry-Perot resonances), for lack of confidence in existing spectral tabular data for the 5-7 micron region, as line shapes in the wing regions of water vapor lines are difficult to characterize. The measurements are required for air pollution studies using a CO laser, to find the differential absorption at the wavelengths in question due to atmospheric constituents other than water vapor. The design and performance of the optoacoustical detector are presented. Effects of absorption by ambient NO are considered, and the fixed-frequency discretely tunable CO laser is found suitable for monitoring urban NO concentrations in a fairly dry climate, using the water vapor absorption data obtained in the study.

Menzies, R. T.↗

Research on Supersonic Inlet Bleed

Phase I data results of the Fundamental Inlet Bleed Experiments project at NASA Glenn Research Center (GRC) are presented which include flow coefficient results for two single-hole boundary-layer bleed configurations. The bleed configurations tested are round holes at inclination angles of 90deg and 20deg both having length-to-diameter ratios of 2.0. Results were obtained at freestream Mach numbers of 1.33, 1.62, 1.98, 2.46, and 2.92 and unit Reynolds numbers of 0.984, 1.89, and 2.46 10(exp 7)/m. Approach boundary-layer data are presented for each flow condition and the flow coefficient results are compared to existing multi-hole data obtained under similar conditions. For the 90deg hole, the single and multi-hole distributions agree fairly well with the exception that under supercritical operation, the multi-hole data chokes at higher flow coefficient levels. This behavior is also observed for the 20deg hole but to a lesser extent. The 20deg hole also shows a markedly different characteristic at subcritical operation. Also presented are preliminary results of a Computational Fluid Dynamics (CFD) analysis of both configurations at the Mach 1.33 and a unit Reynolds number of 2.46 10(exp 7)/m. Comparison of the results shows the agreement to be very good.

Davis, David O.↗

Preliminary Tests in the Supersonic Sphere

This report presents preliminary data obtained in the Langley supersonic sphere. The supersonic sphere is essentially a whirling mechanism enclosed in a steel shell which can be filled with either air or Freon gas. The test models for two-dimensional study are of propeller form having the same plan form and diameter but varying only in the airfoil shape and thickness ratio. Torque coefficients for the 16-006, 65-110, and the 15 percent thick ellipse models are presented, as well as pressure distributions on a circular-arc supersonic airfoil section having a maximum thickness of 10 percent chord at the 1/3-chord position. Torque coefficients were measured in both Freon and air on the 15 percent thick ellipse, and the data obtained in air and Freon are found to be in close agreement. The torque coefficients for the three previously mentioned models showed large differences in magnitude at tip Mach numbers above 1, the model with the thickest airfoil section having the largest torque coefficient. Pressure distribution on the previously mentioned circular-arc airfoil section are presented at Mach numbers of 0.69, 1.26, and 1.42. At Mach numbers of 1.26 and 1.42 the test section is in the mixed flow region where both subsonic and supersonic speeds occur on the airfoil. No adequate theory has been developed for this condition of mixed flow, but the experimental data have been compared with values of pressure based on Ackeret's theory. The experimental data obtained at a Mach number of 1.26 on the rear portion of the airfoil section agree fairly well with the values calculated by Ackeret's theory. At a Mach number of 1.42 a larger percentage of the airfoil is in supersonic flow, and the experimental data for the entire airfoil agree fairly well with the values obtained using Ackeret's theory.

Baker, John E.↗

Calorimetric classification of track-like signatures in liquid argon TPCs using MicroBooNE data

The MicroBooNE liquid argon time projection chamber located at Fermilab is a neutrino experiment dedicated to the study of short-baseline oscillations, the measurements of neutrino cross sections in liquid argon, and to the research and development of this novel detector technology. Accurate and precise measurements of calorimetry are essential to the event reconstruction and are achieved by leveraging the TPC to measure deposited energy per unit length along the particle trajectory, with mm resolution. We describe the non-uniform calorimetric reconstruction performance in the detector, showing dependence on the angle of the particle trajectory. Such non-uniform reconstruction directly affects the performance of the particle identification algorithms which infer particle type from calorimetric measurements. This work presents a new particle identification method which accounts for and effectively addresses such non-uniformity. The newly developed method shows improved performance compared to previous algorithms, illustrated by a 93.7% proton selection efficiency and a 10% muon mis-identification rate, with a fairly loose selection of tracks performed on beam data. The performance is further demonstrated by identifying exclusive final states in ν μ CC interactions. While developed using MicroBooNE data and simulation, this method is easily applicable to future LArTPC experiments, such as SBND, ICARUS, and DUNE.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗