Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Use of multi-transition-metal-ion-exchanged zeolite 13X catalysts in methane emissions abatement

Methane is a potent greenhouse gas. It has a global warming potential (GWP) 23 times greater than carbon dioxide. Reducing methane emissions would lead to substantial economic and environmental benefits. This study investigated the performance of multi-transition-metal-(Cu, Cr, Ni, and Co)-ion-exchanged zeolite 13X catalysts in methane emissions abatement. The catalytic activity in methane combustion using multi-ion-exchanged catalysts was studied with different parameters including the molar percentage of metal loading, the space velocity, and the inlet methane concentration under atmospheric pressure and at a relatively low reaction temperature of 500 C. The performance of the catalysts was determined in terms of the apparent activation energy, the number of active sites of the catalyst, and the BET surface area of the catalyst. This study showed that multi-ion-exchanged catalysts outperformed single-ion-exchanged and acidified 13X catalysts and that lengthening the residence time led to a higher methane conversion percentage. The enhanced catalytic activity in the multi-ion-exchanged catalysts was attributed to the presence of exchanged transition ions instead of acid sites in the catalyst. The catalytic activity of the catalysts was influenced by the metal loading amount, which played an important role in affecting the apparent activation energy for methane combustion, the active sites, and the BET surface area of the catalyst. Increasing the amount of metal loading in the catalyst decreased the apparent activation energy for methane combustion and also the BET surface area of the catalyst. An optimized metal loading amount at which the highest catalytic activity was observed due to the combined effects of the various factors was determined. (author)

36 MATERIALS SCIENCE↗

Superhydrophobic heat exchangers delay frost formation and enhance efficency of electric vehicle heat pumps

The number of electric vehicles has rapidly expanded as high-performance automotive lithium-ion batteries have become more affordable. However, the range of electric vehicles decreases in cold climates partly because of the additional thermal loads associated with cabin heating. One way to improve the efficiency of cabin heating is to replace resistive heating elements with an air-source heat pump system. However, to gain the full benefit of heat pumping, frost formation on the outdoor heat exchanger must be minimized. In this work, we modified the surface wettability of aluminum louvered-fin automotive heat pump evaporators and tested them under realistic operating conditions in a transcritical carbon dioxide (CO 2 ) heat pump. Each heat exchanger underwent several consecutive frosting and defrosting cycles to understand the cyclic performance of the system. The heat exchanger with a superhydrophobic outer surface was able to delay frost formation and maintain higher heat transfer rates when compared to heat exchangers with higher surface energies (hydrophilic). The delayed frost formation resulted in a system efficiency benefit in the first few frosting cycles but diminished in later cycles due to water retention and incomplete defrosting. However, for most automotive applications the superhydrophobic heat exchanger showed substantial benefits for normal driving trips. We report the scalable and optimized superhydrophobic heat exchangers developed here have the potential to increase the efficiency of automotive heat pumps and consequently increase the range and reduce energy consumption of electric vehicles.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Thermohydraulic experiments on a supercritical carbon dioxide–air microtube heat exchanger

Heat exchangers are critical components in supercritical CO 2 Brayton cycles and provide necessary heat input, recovery, and dissipation. Tubular heat exchangers with unconventionally small tube sizes (tube diameters less than 5 mm) are promising components for supercritical CO 2 cycles and potentially provide excellent structural stability with wide scope of application. This paper provides essential design and fabrication guidelines for a compact shell-and-tube heat exchanger with microtubes (with an inner diameter equal to 1.75 mm). A heat exchanger test rig is used to evaluate the thermohydraulic performance of this heat exchanger with supercritical CO 2 and air as working fluids. Thermohydraulic data are reported for more than forty sets of experiments with varying Reynolds numbers for shell and tube flows. Critical performance metrics are calculated from the data and compared with predictions from a previously described numerical model. The average deviations between the experimental and model results fall within 10% for all critical metrics. This excellent agreement validates the numerical model for supercritical CO 2 heat exchanger optimization and scale-up.

42 ENGINEERING↗

Experimental and numerical investigation of hydrate-guest molecule exchange kinetics

The 2012 Ignik Sikumi #1 Field Trial in Alaska was designed to test at field scale a methane hydrate production methodology that involves injecting carbon dioxide (CO 2 ) in situ to exchange with methane (CH 4 ) within a hydrate structure, thus releasing the methane for production. Since the completion of the field trial, experimental and numerical investigations have sought to better understand observations in terms of CH 4 production and changes to the hydrate bearing formation. Collectively, these insights may lead to more effective strategies for producing CH 4 from naturally occurring hydrates. This study presents results from a laboratory experiment performed at conditions experienced during the field trial (8.27 MPa and 275.15 K) to collect data relating to the CH 4 molecular exchange process. The experiment intentionally isolated the kinetic guest molecule exchange process from additional hydrate formation and mechanical changes to the hydrate bearing sand. Data were used to inform development of numerical models that were then used to fit key hydrate parameters (bound water saturation, kinetic formation constant, kinetic exchange constant, and preferential exchange weighting factors) and analyze experimental results. Results were in agreement with observations of preferential CO 2 /CH 4 guest molecule exchange at Ignik Sikumi #1 and from previous experimental studies while providing quantitative estimates of changing hydrate compositions. Additionally, simulations confirmed hydrate behavior and composition profiles otherwise indirectly evidenced by experimental results.

03 NATURAL GAS↗

Effect of charge and anisotropic diffusivity on ion exchange kinetics in nuclear waste form materials

Motifs of radionuclide absorption particles (absorbers or fillers) for the nuclear waste treatment usually have crystal structures with nano-sized tunnels for fast ion diffusion. On the other hand, the accumulation of ions generates an electric field which affects the ion diffusion. Therefore, the strong anisotropic kinetic properties and the electric field affect ion exchange kinetics, especially in an assembly of these particles which may block the fast diffusion tunnels for each other. In this work, we developed a mesoscale model to describe the effect of anisotropic kinetic properties and electric field on ion exchange kinetics. With the model we simulated the effect of anisotropic diffusivity, electrochemical potential, particle morphology, size and aggregation on ion exchange kinetics during batch experiments. Here, tt is found that 1) ion exchange results in charge accumulation inside the particle because different ions have different diffusivities and different diffusion driving forces. The electric neutrality is not preserved; 2) the electric field speeds up the slower diffusion ions (either uptake or release) and slows down the faster diffusion ions to reduce charge accumulation and maintains charge neutrality; 3) the ion exchange becomes very slow at the later stages because a) diffusion driving force (electrochemical gradient, Cs + concentration in the solution and Na + inside the particle) continuously decreases, as observed in batch experiments; and b) the diffusivity decreases due to the Cs + concentration dependence of ion diffusivity. This can explain the observed experimental phenomena that the radionuclide capacity usually cannot be reached; 4) for needle-like particle and their clusters, both surface area and diffusion distance along the direction with the fastest diffusivities have significant impact on the ion exchange kinetics.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surface oxygen exchange kinetics of mixed conducting oxides: Dilatometric vs electrical conductivity relaxation study

The surface oxygen exchange kinetics of mixed ionic-electronic conducting (MIEC) oxides play a crucial role in a variety of applications, including solid oxide fuel/electrolysis cells (SOFCs/SOECs), permeation membranes and sensors. To date, a variety of methods, including isotope exchange, electrical conductivity, optical absorptivity and thermogravimetry relaxation, and impedance spectroscopy have been used to measure the oxygen exchange coefficient of MIEC oxides. Each of these methods have their advantages and limitations, depending on the physical and chemical properties of the investigated materials and their sample dimensions and densities. Here, we demonstrate the ability to precisely measure the surface oxygen exchange coefficient (k chem ) of MIEC model material Pr 0.1 Ce 0.9 O 2-δ (PCO) by use of dilatometric relaxation measurements, particularly of interest for materials that exhibit larger chemical expansion coefficients. This is achieved by use of porous bulk specimens to ensure that the contribution of oxygen exchange to the overall kinetics is dominant. We demonstrate that k chem values extracted from chemical expansion relaxation measurements on PCO are nearly identical to those derived from electrical conductivity relaxation measurements. As a result, this provides the opportunity to precisely investigate the oxygen exchange and chemical expansion kinetics of a wide range of materials used in high-temperature applications, particularly where more conventional methods are difficult or inappropriate to apply.

(Pr,Ce)O2-x↗

Additive manufacturing and testing of a ceramic heat exchanger for high-temperature and high-pressure applications for concentrating solar power

Heat exchangers with excellent corrosion and oxidation resistances are essential for the next-generation concentrating solar power (CSP) plants using a molten salt heat transfer fluid and a supercritical CO 2 Brayton power cycle that can operate at temperatures > 700 °C for higher efficiencies. Techniques were developed for additively manufacturing ceramic materials for applications involving high temperature, high pressure, and high corrosion resistance as needed for the CSP application. Based on a previous ceramic heat exchanger design with its cross-section geometry of the flow channels optimized for heat transfer and mechanical strength, lab-scale prototype heat exchangers, with integrated headers and incorporated flow channel dimensional compensations, were fabricated by using the binder jetting process. The printed prototype heat exchangers were successfully densified through the processes of liquid polymer infiltration and pyrolysis. In addition, thermophysical properties of the densified silicon carbide parts were measured to provide necessary design information. Experimental heat transfer testing of the lab-scale prototype heat exchanger was conducted, and the experimental data agreed reasonably well with the simulated results. Furthermore, this agreement provides validation of the simulation models for their applicability to the development of a full-scale ceramic heat exchanger.

14 SOLAR ENERGY↗

Observations of Ethylene-for-CO Ligand Exchanges on a Zeolite-Supported Single-Site Rh Catalyst by X-ray Absorption Spectroscopy

Quick-scanning X-ray absorption fine structure (QXAFS) measurements were used to characterize the exchanges of ethylene and CO ligands in a zeolite HY-supported single-site Rh complex at a sampling rate of 1.0 Hz. The two ligands were reversibly exchanged on the rhodium, with quantitative results determined for the C 2 H 4 -for-CO exchange that are consistent with a first-order process. The apparent rate constant for the exchange decreased with increasing temperature. Fourier-transform infrared spectra characterizing the C 2 H 4 sorbed in the zeolite showed that the amount decreased with increasing temperature, consistent with the decrease in the exchange rate with increasing temperature. Here the results, illustrating the dynamics of ligand exchanges on a single-site supported metal catalyst, demonstrate the broad emerging applicability of the QXAFS technique for characterizing the dynamics of reactive intermediates on catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precise determination of water exchanges on a mineral surface

Solvent exchanges on solid surfaces and dissolved ions are a fundamental property important for understanding chemical reactions, but the rates of fast exchanges are poorly constrained. In this paper, we probed the diffusional motions of water adsorbed onto nanoparticles of the mineral barite (BaSO 4 ) using quasi-elastic neutron scattering (QENS) and classical molecular dynamics (MD) to reveal the complex dynamics of water exchange along mineral surfaces. QENS data as a function of temperature and momentum transfer (Q) were fit using scattering functions derived from MD trajectories. The simulations reproduce the dynamics measured in the experiments at ambient temperatures, but as temperature is lowered the simulations overestimate slower motions. Decomposition of the MD-computed QENS intensity into contributions from adsorbed and unbound water shows that the majority of the signal arises from adsorbed species, although the dynamics of unbound water cannot be dismissed. The mean residence times of water on each of the four surface sites present on the barite {001} were calculated using MD: at room temperature the low barium site is 194 ps, whereas the high barium site contains two distributions of motions at 84 and 2.5 ps. These contrast to 13 ps residence time on both sulfate sites, with an additional surface diffusion exchange of 66 ps. Surface exchanges are similar to those of the aqueous ions calculated using the same force field: Ba aq 2+ is 208 ps and SO 4aq 2- is 5.8 ps. Finally, this work demonstrates how MD can be a reliable method to deconvolute solvent exchange reactions when quantitatively validated by QENS measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct exchange interaction of localized spins associated with unpaired sp electrons in Be-doped low-temperature-grown GaAs layers

Beryllium-doped GaAs layers grown at low temperatures by molecular-beam epitaxy contain localized spins associated with unpaired sp electrons of As{sub Ga}{sup +} ions. Interactions of these localized spins are investigated by measuring the magnetization with a superconducting quantum interference device and the peak-to-peak width of electron paramagnetic resonance (EPR) spectra for samples with different spin concentrations ranging from 3 x 10{sup 18} to 2.0 x 10{sup 19} cm{sup -3}. The results show that localized spins in this material antiferromagnetically interact on each other via direct exchange. From the analysis of the temperature dependence and field dependence of the magnetization on the basis of the Curie-Weiss law and the molecular-field approximation, exchange energy of each sample was derived. The dependence of the exchange energy on the concentration of localized spins is reasonably explained by a model of direct exchange, which results from the overlapping of wave functions of unpaired electrons at As{sub Ga}{sup +} ions. The peak-to-peak width of EPR spectra increases with an increase in the spin concentration at low temperatures, whereas it decreases with an increase in the temperature for samples with high spin concentrations. These EPR results also show that significant exchange interactions indeed occur between localized spins in this material. These effects of direct exchange interactions between localized spins can clearly be observed at their average distances of around 4 nm, which implies a considerably large spatial extension of the wave function of an unpaired sp electron around an As{sub Ga}{sup +} ion.

36 MATERIALS SCIENCE↗

Broken symmetry approach to density functional calculation of zero field splittings including anisotropic exchange interactions

The broken symmetry approach to the calculation of zero field splittings (or magnetic anisotropies) of multinuclear transition metal complexes is further developed. A procedure is suggested how to extract spin Hamiltonian parameters for anisotropic exchange from a set of broken symmetry density functional calculations. For isotropic exchange coupling constants J{sub ij}, the established procedure is retrieved, and anisotropic (or pseudodipolar) exchange coupling tensors D{sub ij} are obtained analogously. This procedure only yields the sum of the individual single-ion zero field splitting tensors D{sub i}. Therefore, a procedure based on localized orbitals has been developed to extract the individual single-ion contributions. With spin Hamiltonian parameters at hand, the zero field splittings of the individual spin multiplets are calculated by an exact diagonalization of the isotropic part, followed by a spin projection done numerically. The method is applied to the binuclear cation [LCr(OH){sub 3}CrL]{sup 3+} (L = 1,4,7-trimethyl-1,4,7-triazanonane) for which experimental zero field splittings for all low-energy spin states are known, and to the single-molecule magnet [Fe{sub 4}(CH{sub 3}C(CH{sub 2}O){sub 3}){sub 2}(dpm){sub 6}] (Hdpm = 2,2,6,6-tetramethylheptane-3,5-dione). In both these 3d compounds, the single-ion tensors mainly come from the spin-orbit interaction. Anisotropic exchange is dominated by the spin-dipolar interaction only for the chromium compound. Despite the rather small isotropic exchange couplings in the iron compound, spin-orbit and spin-dipolar contributions to anisotropic exchange are of similar size here.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanism of dilute-spin-exchange in solid-state NMR

In the stationary, aligned samples used in oriented sample (OS) solid-state NMR, {sup 1}H-{sup 1}H homonuclear dipolar couplings are not attenuated as they are in magic angle spinning solid-state NMR; consequently, they are available for participation in dipolar coupling-based spin-exchange processes. Here we describe analytically the pathways of {sup 15}N-{sup 15}N spin-exchange mediated by {sup 1}H-{sup 1}H homonuclear dipolar couplings. The mixed-order proton-relay mechanism can be differentiated from the third spin assisted recoupling mechanism by setting the {sup 1}H to an off-resonance frequency so that it is at the “magic angle” during the spin-exchange interval in the experiment, since the “magic angle” irradiation nearly quenches the former but only slightly attenuates the latter. Experimental spectra from a single crystal of N-acetyl leucine confirm that this proton-relay mechanism plays the dominant role in {sup 15}N-{sup 15}N dilute-spin-exchange in OS solid-state NMR in crystalline samples. Remarkably, the “forbidden” spin-exchange condition under “magic angle” irradiation results in {sup 15}N-{sup 15}N cross-peaks intensities that are comparable to those observed with on-resonance irradiation in applications to proteins. The mechanism of the proton relay in dilute-spin-exchange is crucial for the design of polarization transfer experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optically tunable spin-exchange energy at donor:acceptor interfaces in organic solar cells

Spin-exchange energy is a critical parameter in controlling spin-dependent optic, electronic, and magnetic properties in organic materials. This article reports optically tunable spin-exchange energy by studying the line-shape characteristics in magnetic field effect of photocurrent developed from intermolecular charge-transfer states based on donor:acceptor (P3HT:PCBM) system. Specifically, we divide magnetic field effect of photocurrent into hyperfine (at low field < 10 mT) and spin-exchange (at high field > 10 mT) regimes. We observe that increasing photoexcitation intensity can lead to a significant line-shape narrowing in magnetic field effect of photocurrent occurring at the spin-exchange regime. We analyze that the line-shape characteristics is essentially determined by the changing rate of magnetic field-dependent singlet/triplet ratio when a magnetic field perturbs the singlet-triplet transition through spin mixing. Based on our analysis, the line-shape narrowing results indicate that the spin-exchange energy at D:A interfaces can be optically changed by changing photoexcitation intensity through the interactions between intermolecular charge-transfer states. Therefore, our experimental results demonstrate an optical approach to change the spin-exchange energy through the interactions between intermolecular charge-transfer states at donor:acceptor interface in organic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exchange bias in zinc ferrite-FeNiMoB based metallic glass composite thin films

The Exchange bias phenomenon and methods to manipulate the bias field in a controlled manner are thrust areas in magnetism due to its sophisticated theoretical concepts as well as advanced technological utility in the field of spintronics. The Exchange bias effect is observed as a result of ferromagnetic-antiferromagnetic (FM-AFM) exchange interaction, usually observed as a loop shift on field cooling below the Neel temperature of AFM. In the present study, we have chosen zinc ferrite which is a well known antiferromagnet, and FeNiMoB based metallic glass as the ferromagnet. The films were prepared by RF sputtering technique. The thickness and composition was obtained by RBS. The magnetic studies using SQUID VSM indicate exchange bias effect in the system. The effect of thermal annealing on exchange bias effect was studied. The observed exchange bias in the zinc ferrite-FeNiMoB system is not due to FM-AFM coupling but due to spin glass-ferromagnetic interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Karpman-Washimi magnetization with electron-exchange effects in quantum plasmas

The influence of quantum electron-exchange on the Karpman-Washimi ponderomotive magnetization is investigated in quantum plasmas. The ponderomotive magnetization and the total radiation power due to the non-stationary Karpman-Washimi interaction related to the time-varying field intensity are obtained as functions of the de Broglie wave length, Debye length, and electron-exchange parameter. The result shows that the electron-exchange effect enhances the cyclotron frequency due to the ponderomotive interactions in quantum plasmas. It is also shown that the electron-exchange effect on the Karpman-Washimi magnetization increases with increasing wave number. In addition, the Karpman-Washimi magnetization and the total radiation power increase with an increase in the ratio of the Debye length to the de Broglie wave length. In streaming quantum plasmas, it is shown that the electron-exchange effect enhances the ponderomotive magnetization below the resonant wave number and, however, suppresses the ponderomotive magnetization above the resonant wave number. The variation of the Karpman-Washimi magnetization and the radiation power due to the variation of the electron-exchange effect and plasma parameters is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface waves on quantum plasma half-space with electron exchange-correlation effects

The propagation of surface waves on a quantum plasma half-space is investigated, taking into account the electron exchange-correlation effect. Using the modified quantum hydrodynamic model in conjunction with the Poisson equation, the dispersion relation of surface waves is obtained. It is found that due to the presence of electron exchange-correlation effect the wave frequency is shifted to lower frequencies. For different ranges of Brueckner parameter r{sub s}, the effect of electron exchange-correlation is investigated. It is indicated that for weak coupling region with r{sub s} < 0.1, the wave frequency remains unchanged and in this region the effect of electron exchange-correlation is negligible. For moderate coupling region, i.e., (0.1 < r{sub s} < 1), the influence of electron exchange-correlation is important and as r{sub s} increases, the electron exchange-correlation effect also increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystal structure and cation exchanging properties of a novel open framework phosphate of Ce (IV)

Herein we report preparation, crystal structure and ion exchanging properties of a new phosphate of tetravalent cerium, K{sub 2}Ce(PO{sub 4}){sub 2}. A monoclinic structure having framework type arrangement of Ce(PO{sub 4}){sub 6} units formed by C2O{sub 8} square-antiprism and PO{sub 4} tetrahedra is assigned for K{sub C}e(PO{sub 4}){sub 2}. The K{sup +} ions are occupied in the channels formed by the Ce(PO{sub 4})6 and provide overall charge neutrality. The unique channel type arrangements of the K+ make them exchangeable with other cations. The ion exchanging properties of K2Ce(PO4)2 has been investigated by equilibrating with solution of 90Sr followed by radiometric analysis. In optimum conditions, significant exchange of K+ with Sr2+ with Kd ~ 8000 mL/g is observed. The details of crystal structure and ion exchange properties are explained and a plausible mechanism for ion exchange is presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fouling reduction characteristics of a no-distributor-fluidized-bed heat exchanger for flue gas heat recovery

In conventional flue gas heat recovery systems, the fouling by fly ashes and the related problems such as corrosion and cleaning are known to be major drawbacks. To overcome these problems, a single-riser no-distributor-fluidized-bed heat exchanger is devised and studied. Fouling and cleaning tests are performed for a uniquely designed fluidized bed-type heat exchanger to demonstrate the effect of particles on the fouling reduction and heat transfer enhancement. The tested heat exchanger model (1 m high and 54 mm internal diameter) is a gas-to-water type and composed of a main vertical tube and four auxiliary tubes through which particles circulate and transfer heat. Through the present study, the fouling on the heat transfer surface could successfully be simulated by controlling air-to-fuel ratios rather than introducing particles through an external feeder, which produced soft deposit layers with 1 to 1.5 mm thickness on the inside pipe wall. Flue gas temperature at the inlet of heat exchanger was maintained at 450{sup o}C at the gas volume rate of 0.738 to 0.768 CMM (0.0123 to 0.0128 m{sup 3}/sec). From the analyses of the measured data, heat transfer performances of the heat exchanger before and after fouling and with and without particles were evaluated. Results showed that soft deposits were easily removed by introducing glass bead particles, and also heat transfer performance increased two times by the particle circulation. In addition, it was found that this type of heat exchanger had high potential to recover heat of waste gases from furnaces, boilers, and incinerators effectively and to reduce fouling related problems.

20 FOSSIL-FUELED POWER PLANTS↗