Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy Transition Initiative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Synthesis of superconducting freestanding infinite-layer nickelate heterostructures on the millimetre scale

The development of superconductivity in infinite-layer nickelates through hole-doping relies on the controlled synthesis of Ni in a high oxidation state, followed by topotactic reduction to a very low oxidation state. So far, superconductivity has been realized only in epitaxial thin films. Here, in this work, we integrate these techniques with heterostructures that include an epitaxial soluble buffer layer, enabling the release of freestanding (Nd,Sr)NiO 2 heterostructures. The released heterostructures exhibit comparable structural and electronic properties to those of optimized thin films, with lateral dimensions ranging from millimetres to ~100 μm, depending on the degree of strain released with respect to the initial substrate. The changes in the superconducting transition temperature upon release of the heterostructure mirror those reported for variations in substrate and pressure, suggesting a common underlying response to strain in the infinite-layer nickelate superconductivity. These freestanding structures will facilitate a range of experimental studies without the constraints of substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spectral transition of multiscale turbulence in the tokamak pedestal

The transition in the turbulence spectrum from ion-scale dominated regimes to multiscale transport regimes that couple ion and electron scales is studied with gyrokinetic simulations of turbulent transport. The simulations are based on DIII-D high-confinement mode (H-mode) plasma parameters in the tokamak pedestal. The transition is initiated by varying the ion temperature gradient. To our knowledge, no full multiscale simulations of pedestal-like transport have been done previously. The experimental parameters lie in a bifurcation region between the two regimes. At long wavelengths, a complex, ion-direction hybrid mode is the dominant linearly unstable drift wave, while an electron temperature gradient-driven mode is unstable at short wavelengths. In the transition from the multiscale branch to the ion-scale branch, the magnitude of the ion-scale poloidal wavenumber spectrum of the nonlinear turbulent energy flux increases and the magnitude of the high-wavenumber spectrum decreases. Here, the decrease in the electron-scale transport is due to nonlinear mixing with ion-scale fluctuations and the ion-scale-driven zonal flows. A shift in the total energy associated with the fluctuating electrostatic potential intensity from dominantly drift kinetic energy in the multiscale regime to dominantly potential intensity in the ion-scale regime is well-correlated with the trend in the total energy flux.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Rotational excitation and de-excitation of magnesium mono-sulphide (MgS) by He collisions

ABSTRACT Magnesium mono-sulphide (MgS) plays a crucial role in astrochemical processes, particularly in the interstellar medium (ISM), where metal-sulphur chemistry influences molecular formation and evolution. This work presents a detailed study of the rotational excitation and de-excitation of MgS through collisions with helium (He) atoms, the second most abundant species in the ISM after hydrogen, which includes both atomic (H) and molecular forms (H2). The focus on MgS–He collisions arises from He's high abundance, chemical inertness, and simpler electronic structure, which make it well suited for quantum scattering calculations. These characteristics establish He as an ideal candidate for initial studies, providing fundamental data for future investigations involving H2. The study uses quantum scattering methods to calculate the collisional rate coefficients over a broad temperature range. These rates are critical for interpreting observational data on MgS and predicting its abundance in space. The interaction potential between MgS and He is calculated using the rigid rotor approximation and the Jacobi coordinate system, employing the CCSD(T)-F12a/aug-cc-pVTZ method for accurate two-dimensional potential energy surface. The study explores the anisotropic nature of the MgS–He interaction, which favours odd Δj rotational transitions at low collision energies. The inelastic cross-sections for rotational transitions involving up to 16 rotational levels of MgS were computed up to 1000 cm−1, enabling the calculation of rate coefficients up to 150 K for Δj = ±1, ±2, and ± 3 rotational transitions. The results show that Δj = 1 transitions dominate at low temperatures, while Δj = 2 transitions become more significant at higher temperatures. This study provides valuable data for interpreting future astrophysical observations of MgS. The findings also propose new rotational transitions for MgS detection in space, enhancing our ability to track and study this molecule in various cosmic environments.

Hendaoui, Hamza (ORCID:0000000218641872)↗
NASA NTRS2012

Free-Free Transitions of e-H System Inside a Dense Plasma Irradiated by a Laser Field at Very Low Incident Electron Energies

The free-free transition is studied for an electron-hydrogen in the ground state at low incident energies in the presence of an external homogenous, monochromatic, and linearly polarized laser-field inside a hot dense plasma.The effect of plasma screening is considered in the Debye-Huckel approximation. The calculations are performed in the soft photon limit, assuming that the plasma frequency is much higher than the laser frequency. The incident electron is considered to be dressed by the laser field in a nonperturbative manner by choosing the Volkov solutions in both the initial and final channels. The space part of the scattering wave function for the electron is solved numerically by taking into account the electron exchange. The laser-assisted differential and total cross sections are calculated for single-photon absorption /emission and no photon exchange in the soft photon limit, the laser intensity being much less than the atomic field intensity. The calculations have been carried out for various values of Debye parameter, ranging from 0.005 to 0.12. A strong suppression is noted in the laser-assisted cross sections as compared to the field-free situation. A significant difference is noted for the singlet and triplet cross sections. The suppression is much more in the triplet states.

Bhatia, A. K.↗
DOE OSTI2020

Elucidation of Active Oxygen Sites upon Delithiation of Li 3 IrO 4

Transformational increases in the storage capacity of battery cathodes could be achieved by tapping into the redox activity at oxide ligands in addition to conventional transition metal couples. However, the key signatures that govern such lattice oxygen redox (LOR) have not been ascertained. Li 3 IrO 4 has the largest reversible LOR, rendering it a unique model system. Here, X-ray spectroscopy and computational simulations reveal that LOR in Li 3 IrO 4 is selectively compensated via O sites with three lone pairs, which are activated by Li/Ir disorder. The two-electron LOR can be reversed to regenerate the initial state without unlocking competing bulk reactions observed in many other compounds. We uncover an intricate interplay between stoichiometry, O coordination, and nonbonding states in LOR and pinpoint spectroscopic signatures. This interplay is indispensable for designing materials with 3d metals that fulfill the promise of LOR to overcome the bottlenecks of current cathodes for future implementation in practical batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Growing neoclassical tearing modes seeded via transient-induced-multimode interactions

Nonlinear extended magnetohydrodynamics simulations demonstrating seeding of neoclassical tearing modes (NTMs) via magnetohydrodynamics-transient-induced multimode interactions are presented. Simulations of NTMs are enabled by two recent NIMROD code developments: the implementation of heuristic neoclassical stresses and the application of transient magnetic perturbations (MPs) at the boundary. NTMs are driven unstable by the inherently pressure driven kinetic bootstrap current, which arises due to collisional viscosity between passing and trapped electrons. These simulations use heuristic closures that model the neoclassical electron and ion stresses. NTM growth requires a seed island, which is generated by a transiently applied MP in simulations. The capability is demonstrated using kinetic-based reconstructions with flow of a DIII-D ITER Baseline Scenario discharge (La Haye et al., in Proceedings IAEA FEC, 2020). The applied MP seeds a 2/1 NTM that grows in two phases: a slow growth phase followed by a faster robust growth phase. Additionally, an evolving sequence of higher order core modes are excited at first. Power transfer analysis shows that nonlinear interactions between the core modes and the 2/1 helps drive the initial slow growth. Once the induced 2/1 magnetic island reaches a critical width, the NTM transitions to faster robust growth, which is well described by the nonlinear modified Rutherford equation. Furthermore, this work highlights the role of nonlinear mode coupling in seeding NTMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Stability analysis of WEST L-mode discharges with improved confinement from boron powder injection

WEST L-mode plasmas with dominant electron heating and no core torque source have observed improvements in confinement during boron (B) powder injection. These results are reminiscent of previous powder injection experiments on other devices and gaseous impurity seeding experiments on WEST. During powder injection, the stored energy increased up to 25% due to enhanced ion and electron heat and particle confinement. The improvements in confinement were not indicative of an L-H transition. To identify the dominant mechanisms and the causality chain behind these improvements in confinement, we employ interpretative modeling using METIS, predictive integrated modeling using a high-fidelity plasma simulator (HFPS), and stand-alone gyrokinetic simulations using quasi-linear gyrokinetic code. Interpretative modeling with METIS allowed for the estimation of missing data while maintaining good overall consistency with experiment. These results provided the initial conditions for fully predictive flux driven simulations using the HFPS. From these simulations, quasi-linear gyrokinetic analysis was performed at ρ = 0.5 and ρ = 0.65. Collisionality was found to be a strong candidate for the turbulence suppression mechanism at ρ = 0.5, while a combination of collisionality and the T e /T i ratio was found to be the likely mechanism at ρ = 0.65. The results additionally suggested that increased Z eff (through main ion dilution) could play a role in the improved confinement, but this could not be confirmed due to a lack of experimental measurements. The modeling framework established here can now be used to evaluate and exploit a variety of future powder injection experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Characterizing the Geothermal Lithium Resource at the Salton Sea

The energy transition towards a more sustainable and renewable future is a pivotal global endeavor. Central to this shift for the United States is the critical role of domestically sourced lithium, a key mineral in the production of high-performance batteries essential for electric vehicles and renewable energy storage systems. This has driven the United States to invest heavily in a domestic supply chain for batterygrade lithium to enhance energy security, reduce supply chain vulnerabilities, and foster economic growth by tapping into local resources. A notable example is the Biden Administration’s “American Battery Materials Initiative,” which was included in the $2.8-billion Bipartisan Infrastructure Law (The White House, 2022).

25 ENERGY STORAGE↗
NASA NTRS1976

Flare build-up study; Proceedings of the Workshop, Falmouth, Mass., September 8-11, 1975

The papers deal with problems which might be common to solar flares and earth's magnetosphere, problems associated with the initial phases of the flare phenomenon, the acceleration processes that seem to occur in flares and the magnetosphere, as well as the buildup and storage of flare energy in magnetic-field structures. Topics include the active role of magnetic fields in providing flare energy, current-sheet models of solar flares, the role of plasma turbulence in flare development, similarities and differences between magnetospheric substorms and solar flares, observations of magnetic merging in earth's magnetotail during magnetospheric substorms, evidence for magnetic-energy storage in coronal active regions, the possible role of transition-zone instabilities in preflare energy buildup, and flare energy storage and deposition. Other papers discuss energy release through the interaction of coronal magnetic fields, photospheric electric currents as a source of flare energy, magnetic-energy buildup in the solar atmosphere, magnetic and velocity fields in an active region, flare onset at meter wavelengths, laboratory experiments on field-line reconnection, key problems in auroral flare processes, and the solar-physics Shuttle/Spacelab program. Individual items are announced in this issue.

Svestka, Z.↗
DOE OSTI2026

Atomic-scale vacancy engineering unlocks basal-plane catalytic activity in metallic WSe 2 for reversible oxygen electrocatalysis

Two-dimensional metallic transition metal dichalcogenides offer high electrical conductivity and large surface areas for electrocatalysis, yet their inherent basal planes are catalytically inert. Here, we present an atomic-scale vacancy engineering strategy to activate the basal surfaces of metallic WSe 2 for reversible oxygen electrocatalysis. This approach, based on intentionally designed substitutional metal doping, promotes the spontaneous formation of selenium vacancies while preserving the metallic 1 T′ phase, thereby creating highly reactive and oxygen-affinitive sites. Density functional theory calculations reveal that these vacancy-mediated metal complexes dramatically lower the energy barriers for initial oxygen adsorption, enabling dissociative oxygen adsorption. Operando and ex-situ spectroscopic analyses confirm that vacancy-mediated metal complexes transform into dynamic Se/W-oxide intermediates under operating conditions. Se/W-oxides on the surface experimentally and theoretically prove electrocatalytic activity and reversibility. Applying this strategy in lithium–oxygen batteries, the basal-plane activated WSe 2 shows high discharge capacities (9868 mA h g −1 , corresponding to 3947 mA h g$^{-1}_{cathode}$), impressive cycle retention over 550 cycles at 1000 mA h g −1 , and outstanding rate–capability over a wide current–density range (100–3000 mA g −1 ) during 256 cycles.

2D materials↗
DOE OSTI2020

Chemical short-range order in derivative Cr–Ta–Ti–V–W high entropy alloys from the first-principles thermodynamic study

The development of high-entropy alloys (HEAs) focuses on exploring compositional regions in multi-component systems with all alloy elements in equal or near-equal atomic concentrations. Initially it was based on the main idea that high mixing configurational entropy contributions to the alloy free energy could promote the formation of a single solid solution phase. By using the ab-initio based Cluster Expansion (CE) Hamiltonian model constructed for the quinary bcc Cr–Ta–Ti–V–W system in combination with Monte Carlo (MC) simulations, we show that the phase stability and chemical short-range order (SRO) of the equiatomic quinary and five sub-quaternary systems, as well as their derivative alloys, can dramatically change the order–disorder transition temperatures (ODTT) as a function of alloy compositions. In particular, it has been found, that the equiatomic quaternary Ta–Ti–V–W and Cr–Ta–Ti–W alloys had the lowest order–disorder transition temperature (500 K) among all the analysed equiatomic compositions. In all investigated alloy systems, the strongest chemical ordering has been observed between Cr and V, which led to the conclusion that decreasing the concentration of either Cr or V might be beneficial in terms of decreasing the ODTT. It also predicts that increasing concentration of Ti significantly decreases the ODTT. Our analysis of chemical SRO as a function of alloy composition allows to understand the microstructure evolution of HEAs as a function of temperature in excellent agreement with available experimental observations. Importantly, our free energy of mixing and SRO calculations predict that the origin of precipitates formed by Cr- and V-rich in the sub-quaternary Cr–Ta–V–W system is driven by the thermodynamics. The modelling results are in an excellent agreement with experimental observation of Cr and V segregation in the W 0.38 Ta 0.36 Cr 0.15 V 0.11 alloy which in turns shows an exceptional radiation resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Simulation of Continental Shallow Cumulus Populations Using an Observation-Constrained Cloud-System Resolving Model

Continental shallow cumulus (ShCu) clouds observed on 30 August 2016 during the Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems (HI-SCALE) field campaign are simulated by using an observation-constrained cloud-system resolving model. On this day, ShCu forms over Oklahoma and southern Kansas and some of these clouds transition to deeper, precipitating convection during the afternoon. We apply a four-dimensional ensemble-variational (4DEnVar) hybrid technique in the Community Gridpoint Statistical Interpolation (GSI) system to assimilate operational data sets and unique boundary layer measurements including a Raman lidar, radar wind profilers, radiosondes, and surface stations collected by the U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) atmospheric observatory into the Weather Research and Forecasting (WRF) model to ascertain how improved environmental conditions can influence forecasts of ShCu populations and the transition to deeper convection. Independent observations from aircraft, satellite, as well as ARM's remote sensors are used to evaluate model performance in different aspects. Several model experiments are conducted to identify the impact of data assimilation (DA) on the prediction of clouds evolution. The analyses indicate that ShCu populations are more accurately reproduced after DA in terms of cloud initiation time and cloud base height, which can be attributed to an improved representation of the ambient meteorological conditions and the convective boundary layer. Extending the assimilation to 18 UTC (local noon) also improved the simulation of shallow-to-deep transitions of convective clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Non-linear MHD modelling of edge localized modes suppression by resonant magnetic perturbations in ITER

Edge localized modes (ELMs) suppression by resonant magnetic perturbations (RMPs) was studied with the non-linear magneto-hydro-dynamic (MHD) code JOREK for the ITER H-mode scenarios at 15 MA, 12.5 MA, 10 MA/5.3 T. In this study, the main aim was to demonstrate that ELMs can be suppressed by RMPs while the divertor 3D footprints of heat and particle fluxes remain within divertor material limits. The unstable peeling–ballooning modes responsible for ELMs without RMPs were modelled first for each scenario using numerically accessible parameters for ITER. Then the stabilization of ELMs by RMPs was modelled with the same parameters. RMP spectra, optimized by the linear MHD MARS-F code, with main toroidal harmonics N = 2, N = 3, N = 4 have been used as boundary conditions of the computational domain of JOREK, including realistic RMP coils, main plasma, scrape off layer (SOL) divertor and realistic first wall. The model includes all relevant plasma flows: toroidal rotation, two fluid diamagnetic effects and neoclassical poloidal friction. With RMPs, the main toroidal harmonic and the non-linearly coupled harmonics remain dominant at the plasma edge, producing saturated modes and a continuous MHD turbulent transport thereby avoiding ELM crashes in all scenarios considered here. The threshold for ELM suppression was found at a maximum RMP coils current of 45 kAt–60 kAt compared to the coils maximum capability of 90 kAt. In the high beta poloidal steady-state 10 MA/5.3 T scenario, a rotating QH-mode without ELMs was observed even without RMPs. In this scenario with RMPs N = 3, N = 4 at 20 kAt maximum current in RMP coils, similar QH-mode behaviour was observed however with dominant edge harmonic corresponding to the main toroidal number of RMPs. The present MHD modelling was limited in time by few tens of ms after RMPs were switched on until the magnetic energy of the modes saturates. As a consequence the thermal energy was still evolving on this time scale, far from the ITER confinement time scale and hence only the form of 3D footprints on the divertor targets can be indicated within this set-up. Also note, that the divertor physics was missing in this model, so realistic values of fluxes are out of reach in this modelling. However the stationary 3D divertor and particle fluxes could be simply extrapolated from these results to the stationary situation considering that a large power fraction should be radiated in the core and SOL and only about 50 MW power is going to the divertor, which is an arbitrary, but reasonable number used here. The 3D footprints with RMPs show the characteristic splitting with the main RMP toroidal symmetry. The maximum radial extension of the footprints typically was ~20 cm in inner divertor and ~40 cm in outer divertor with stationary heat fluxes decreasing further out from the initial strike point from ~5 MW m ₋2 to ~1 MW m ₋2 assuming a total power in the divertor and walls is 50 MW. The heat fluxes remain within the divertor target and baffle areas, however with rather small margin in the outer divertor which could be an issue for the first wall especially in transient regimes when part of the plasma thermal energy is released due to switching on the RMP coils. This fact should be considered when RMPs are applied with a more favorable application before or soon after the L–H transition, although optimization is required to avoid increasing the L–H power threshold with RMPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1999

Disturbance Dynamics in Transitional and Turbulent Flows

In order to expand the predictive capability of single-point turbulence closure models to account for the early-stage transition regime, a methodology for the formulation and calibration of model equations for the ensemble-averaged disturbance kinetic energy and energy dissipation rate is presented. First the decay of laminar disturbances and turbulence in mean shear-free flows is studied. In laminar flows, such disturbances are linear superpositions of modes governed by the Orr-Sommerfeld equation. In turbulent flows, disturbances are described through transport equations for representative mean quantities. The link between a description based on a deterministic evolution equation and a probability based mean transport equation is established. Because an uncertainty in initial conditions exists in the laminar as well as the turbulent regime, a probability distribution must be defined even in the laminar case. Using this probability distribution, it is shown that the exponential decay of the linear modes in the laminar regime can be related to a power law decay of both the (ensemble) mean disturbance kinetic energy and the dissipation rate. The evolution of these mean disturbance quantities is then described by transport equations similar to those for the corresponding turbulent decaying flow. Second, homogeneous shear flow, where disturbances can be described by rapid distortion theory (RDT), is studied. The relationship between RDT and linear stability theory is exploited in order to obtain a closed set of modeled equations. The linear disturbance equations are solved directly so that the numerical simulation yields a database from which the closure coefficients in the ensemble-averaged disturbance equations can be determined.

Grosch, Chester E.↗
NASA NTRS2000

SUMI: The Solar Ultraviolet Magnetograph Investigation

A major focus of solar physics is the measurement of the temporal and spatial variability of solar magnetic fields from the photosphere into the lower corona, together with the study of how their behavior produces the dynamic phenomena in this region such as flares and Coronal Mass Injection (CMEs). Considerable success has been achieved in the characterization of the full vector field in the photosphere, where P, the ratio of the gas pressure to the magnetic pressure, is greater than or equal to 1. At higher levels in the atmosphere where beta is less than 1, the magnetic field (through the Lorentz force) controls the structure and dynamics of the solar atmosphere, and rapid changes in structure with release of energy become possible. However, observations of the field at these higher levels have proven to be difficult, placing a serious limitation on our understanding of the physical processes occurring there. This poster will discuss the Solar Ultraviolet Magnetograph Investigation (SUMI), a hardware development study for an instrument capable of measuring the polarization in ultraviolet lines of C IV and Mg II formed in the transition region and upper chromosphere. We are currently developing optical technologies necessary to build an instrument that will achieve a major advance in performance over that of earlier attempts (e.g., SMM/UVSP). Initially configured as a sounding rocket payload, such a UV magnetograph would allow us to make exploratory measurements extending the observation of solar magnetic fields into new and dynamic regimes. This work is supported by NASA through the SEC Program in Solar Physics and the program for Technology Development for Explorer Missions and Sofia.

Davis, John M.↗
NASA NTRS2020

Over-Winter Persistence of Supraglacial Lakes on the Greenland Ice Sheet: Results and Insights From a New Model

We present a newly developed 1-D numerical energy-balance and phase transition supraglacial lake model: Glacier Lake. Glacier Lake incorporates snowfall, in situ snow and ice melt, incoming water from the surrounding catchment, ice lid formation, basal freeze-up and thermal stratification. Snow cover and temperature are varied to test lake development through winter and the maximum lid thickness is recorded. Average wintertime temperatures of −2 to −30◦C and total snowfall of 0 to 3.45 m lead to a range of the maximum lid thickness from 1.2 to 2.8 m after ~250 days, with snow cover exerting the dominant control. An initial ice temperature of −15◦C with simulated advection of cold ice from upstream results in 0.6 m of basal freeze-up. This suggests that lakes with water depths above 1.3 to 3.4 m (dependent on winter snowfall and temperature) upon lid formation will persist through winter. These buried lakes can provide a sizeable water store at the start of the melt season, expedite future lake formation and warm underlying ice even in winter.

glacier hydrology↗
DOE OSTI2020

Overview of research completed with funding from the SciDAC CSPM project (Final Technical Report)

The Center for the Study of Plasma Microturbulence was a SciDAC project managed by the Office of Fusion Energy Sciences in the US Department of Energy. Funding for the University of Maryland was initially modest (40k/year) for the first two years. The remaining four years were funded at 201k/year, with a single $50k supplemental in 2015, and a no-cost extension that ran through March, 2018. The CSPM involved several institutions whose efforts are documented separately. At UMD, the CSPM supported two graduate students (Kanekar and Wilkie), two post-doctoral fellows (Landreman and TenBarge), and summer salary for the UMD PI (Dorland). The supplemental in 2015 provided additional salary for a sabbatical by Dorland in 2015/16. Landreman and TenBarge both transitioned to separately funded research staff positions at Maryland at the ends of their post-doctoral, CSPM-supported, positions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2001

Microcalorimetry: The First Two Decades

Our group at GSFC began experimental and theoretical work on microcalorimetry almost twenty years ago, in August of 1982. Over the next 10 months, we completed the initial demonstration of a Si impurity thermometer-based calorimeter as an X-ray spectrometer. This successful demonstration resulted in the development by many investigators of scientific applications for microcalorimeters, ranging from optical spectroscopy to dark matter detection to particle physics applications. Many new technical approaches for cryogenic detectors were proposed by investigators and have been developed. In this presentation, I will describe the early development of microcalorimeters at GSFC and University of Wisconsin and the subsequent rapid growth of this work around the world The key milestones in the early development were the initial spectroscopy demonstrations and the selection of XRS, our microlcalorimeter-based instrument for the Advanced X-ray Astrophysics Facility (AXAF) and ultimately for ASTRO-E. An additional key event was the development of the direct detection of dark matter experiment and the formation of the Center for Particle Astrophysics. Both of these programs provided long term support for this technology in its precarious early days. A major additional technical step in the development of detectors was the demonstration of devices based on superconducting transition edge sensors (TES). These detectors promised (and have delivered) improved energy resolution and higher event rate capabilities. They couple naturally to SQUIDS, which operate well at the low temperatures where the detectors must operate. The past two decades have taken microcalorimeters from their infancy to applications in real experiments. I will provide an overview of the early development of the devices and review the breadth of the present technology and applications.

Moseley, Harvey↗