Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Earth surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Atomic Manipulation of Single Erbium on GaAs(110): From Adatom Motion to Creation and Control of Bistable Substitutions

We demonstrate atomic-scale control over the position and configuration of single erbium (Er) atoms at the GaAs(110) surface using scanning tunneling microscopy (STM). By applying voltage pulses from the STM tip, we drive Er adatoms to move sequentially among three distinct adsorption sites and controllably substitute into Ga lattice sites. The resulting substitutional Er atoms exhibit two isoelectronic configurations that differ by less than one angstrom in lateral position and can be reversibly switched by additional voltage pulses. Differential conductance spectroscopy shows differences in the unoccupied local electronic states for the two substitutional configurations, and an absence of mid-gap states. Preliminary density functional theory (DFT) calculations support these findings, identifying the most stable adsorption and substitutional sites, their relative binding energies, charge states, and local density of states (LDOS) characteristics. Together, the experimental and theoretical results establish a method for precise, reversible manipulation of rare-earth dopants at semiconductor surfaces, opening a pathway to engineer atomic-scale quantum and optoelectronic functionalities.

Poche, Steven [Ohio State University]↗

Spectral Fidelity of Earth's Terrestrial and Aquatic Ecosystems

The Surface Biology and Geology (SBG) investigation will create global maps of spectral surface reflectance and emissivity at a cadence of 16 days or better, with coverage to address global questions about Earth's geology, cryosphere and ecosystems. The revolutionary potential poses a commensurate challenge: creating contiguous maps free from regional biases induced by atmosphere, observation geometry, or inversion error. This will require an accurate calibration with precise knowledge of each channel's spectral response. In this work, we quantify the impact of spectral calibration on SBG's aquatic and terrestrial ecosystem objectives. We find that contemporary algorithms for ecosystem trait retrieval demand more accurate spectral calibration than historical missions. Errors due to drift or spatial nonuniformity in the wavelength calibration that have previously been considered acceptable can cause systematic errors larger than the instrument noise and of the same order as the variability SBG aims to measure. Moreover, their impact on atmospheric correction can induce climate-dependent systematic errors that thwart comparisons between ecosystems. These results underscore the importance of spectral response accuracy in SBG mission design.

54 ENVIRONMENTAL SCIENCES↗

Landscape-scale Characterization of Arctic Tundra Vegetation Composition, Structure, and Function with a Multi-sensor Unoccupied Aerial System: Supporting Data.

Airborne remote sensing data collected using the Brookhaven National Laboratory's (BNL) heavy-lift unoccupied aerial system (UAS) octocopter platform, the Osprey, operated by the Terrestrial Ecosystem Science and Technology (TEST) group (https://www.bnl.gov/testgroup). This package includes data from three flights flown over the NGEE-Arctic Council, Kougarok and Teller sites in July, 2018. The Osprey is a multi-sensor UAS platform that simultaneously measures very high spatial resolution optical red/green/blue (RGB) and thermal infrared (TIR) surface 'skin' temperature imagery, as well as surface reflectance at 1 nm intervals in the visible to near-infrared spectral range 350 - 1000 nm measured at regular intervals along each flight path. Derived image products include ortho-mosaiced RGB and TIR images, an RGB-based digital surface model (DSM) using the structure from motion (SfM) technique, digital terrain model (DTM), and a canopy height model (CHM). In addition, a VNIR surface reflectance file is provided for the trigger locations collected during each flight campaign. Ancillary aircraft data, flight mission parameters, and general flight conditions provided by the onboard flight and data collection computers are also included. Unprocessed and processed data products are included in this package (processing levels 0-3). Data and metadata are provided as text (*.txt, *.json, *.kml, *hdr, *.enp), tabular (*.dat, *.csv, *.waypoint, ENVI format (no extension)), point cloud (*.laz) and image (*.jpg, *.tif, *png) formats. This metadata document contains flight campaign, instrument and file metadata, along with a description of data processing levels, data products and file naming scheme.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy?s Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Integrating Reanalysis and Satellite Cloud Information to Estimate Surface Downward Long-Wave Radiation

The estimation of downward long-wave radiation (DLR) at the surface is very important for the understanding of the Earth’s radiative budget with implications in surface–atmosphere exchanges, climate variability, and global warming. Theoretical radiative transfer and observationally based studies identify the crucial role of clouds in modulating the temporal and spatial variability of DLR. In this study, a new machine learning algorithm that uses multivariate adaptive regression splines (MARS) and the combination of near-surface meteorological data with satellite cloud information is proposed. The new algorithm is compared with the current operational formulation used by the European Organization for the Exploitation of Meteorological Satellites (EUMETSAT) Satellite Application Facility on Land Surface Analysis (LSA-SAF). Both algorithms use near-surface temperature and dewpoint temperature along with total column water vapor from the latest European Centre for Medium-range Weather Forecasts (ECMWF) reanalysis ERA5 and satellite cloud information from the Meteosat Second Generation. The algorithms are trained and validated using both ECMWF-ERA5 and DLR acquired from 23 ground stations as part of the Baseline Surface Radiation Network (BSRN) and the Atmospheric Radiation Measurement (ARM) user facility. Results show that the MARS algorithm generally improves DLR estimation in comparison with other model estimates, particularly when trained with observations. When considering all the validation data, root mean square errors (RMSEs) of 18.76, 23.55, and 22.08 W·m –2 are obtained for MARS, operational LSA-SAF, and ERA5, respectively. The added value of using the satellite cloud information is accessed by comparing with estimates driven by ERA5 total cloud cover, showing an increase of 17% of the RMSE. The consistency of MARS estimate is also tested against an independent dataset of 52 ground stations (from FLUXNET2015), further supporting the good performance of the proposed model.

54 ENVIRONMENTAL SCIENCES↗

Total metal, carbon, anion, iron speciation, and sulfide concentrations; Slate River, East River, and Trail Creek surface water and floodplains, Crested Butte, CO; May 2023–August 2023

This data package comprises analytical results and metadata from stream and groundwater samples collected from the Slate River, East River, Trail Creek, and their respective floodplains. This dataset contains five files: (1) a samples file (2023_SFA_Field_samples.csv) that contains site information; (2) a chemical analysis data file (2023_FieldWaterSampleData_IC__ICPOES__ICPMS__TOC__Fe__S_chem_data.csv) that contains sample analysis values; (3) a file-level metadata file (flmd.csv) that lists each file contained in the dataset with associated metadata; (4) a data dictionary file (dd.csv) that contains column/row headers used throughout the files along with definitions, units, and data types; and (5) a methods file (methods.csv) that contains ID, type, description, instrument, and lab information for each method.The samples’ anion concentrations were measured using ion chromatography (IC), total metal concentrations using inductively coupled plasma emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS), non-purgeable organic carbon using total organic carbon (TOC) analysis, dissolved sulfide concentration using methylene blue spectrophotometry, and iron speciation using the ferrozine assay. To support bulk chemical analyses and colloid characterization, samples were collected from multiple depths ranging from the surface to 3.5 meters below ground.Update on 2024-10-18: Updates were made to the 2023_FieldWaterSampleData_IC__ICPOES__ICPMS__TOC__Fe__S_chem_data.csv and dd.csv files to correct units (ppb instead of ppm).

54 ENVIRONMENTAL SCIENCES↗

Integrating NDVI-Based Within-Wetland Vegetation Classification in a Land Surface Model Improves Methane Emission Estimations

Earth system models (ESMs) are a common tool for estimating local and global greenhouse gas emissions under current and projected future conditions. Efforts are underway to expand the representation of wetlands in the Energy Exascale Earth System Model (E3SM) Land Model (ELM) by resolving the simultaneous contributions to greenhouse gas fluxes from multiple, different, sub-grid-scale patch-types, representing different eco-hydrological patches within a wetland. However, for this effort to be effective, it should be coupled with the detection and mapping of within-wetland eco-hydrological patches in real-world wetlands, providing models with corresponding information about vegetation cover. In this short communication, we describe the application of a recently developed NDVI-based method for within-wetland vegetation classification on a coastal wetland in Louisiana and the use of the resulting yearly vegetation cover as input for ELM simulations. Processed Harmonized Landsat and Sentinel-2 (HLS) datasets were used to drive the sub-grid composition of simulated wetland vegetation each year, thus tracking the spatial heterogeneity of wetlands at sufficient spatial and temporal resolutions and providing necessary input for improving the estimation of methane emissions from wetlands. Our results show that including NDVI-based classification in an ELM reduced the uncertainty in predicted methane flux by decreasing the model’s RMSE when compared to Eddy Covariance measurements, while a minimal bias was introduced due to the resampling technique involved in processing HLS data. Our study shows promising results in integrating the remote sensing-based classification of within-wetland vegetation cover into earth system models, while improving their performances toward more accurate predictions of important greenhouse gas emissions.

54 ENVIRONMENTAL SCIENCES↗

Vegetation Warming Experiment: 15N Uptake Experiment Water-Extractable Soil Nutrients, Utqiagvik (Barrow), Alaska, 2018

This dataset consists of measured water-extractable carbon and nutrients measured on soils collected from warming experiment enclosures and paired control plots. Harvest types include both natural abundance and enriched soils. Vegetation warming chambers (Zero Power) were deployed on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. These chambers (Figure 1) consistently elevated air temperatures by approximately 4°C using a self-venting system described by Lewin et al (2017). Five chambers were deployed from June 17, 2018 to September 24, 2018 on the BEO within a 1 km2 area centered on 71.275N, -156.641W. Each chamber was co-located with an ambient plot where temperatures were not manipulated on patches of tundra containing the target species Arctagrostis latifolia. An intensive field campaign in late July investigated the impact of warming had on A. latifolia biomass, chemistry, and uptake of 15N labeled ammonia that was injected into the surface soils for one week. Initial measurements were taken on July 21, 2018. Harvest occurred on July 27, 2018. Water-extractable nutrients in soils were measured in July following harvests of A. latifolia plants and underlying soils. Availability of ammonia, nitrate, and phosphate throughout the growing season was measured by extracting nutrients bound to anion and cation binding resins deployed from July through September. Environmental variables (thaw depth, surface soil temperatures, surface soil moisture) were measured. Leaf traits and root traits of A. latifolia were also measured. The data package includes one *.csv data file and one *.pdf user guide. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

A Distributed Temperature Profiling System for Vertically and Laterally Dense Acquisition of Soil and Snow Temperature: Supporting Data

This dataset was used to assess the potential of a Distributed Temperature Profiling System developed and presented in the article named "A Distributed Temperature Profiling System for Vertically and Laterally Dense Acquisition of Soil and Snow Temperature" and submitted to Cryosphere. There are three comma-delimited data files (.csv). Each of them contains snow or soil temperature with times (UTC) in the first column and temperature at various vertical distance from the ground surface (positive means in air/snow) or below the ground surface (negative means in soil). The measurements were acquired every 15 minutes. Data collected at the East River, Colorado site with two probes: 1) measuring air/snow temperature from 1.1 m above the ground surface to the ground surface (with 5 or 10 cm spacing between sensors) and 2) measuring soil temperature from the ground surface to 0.7 m depth (with 5 or 10 cm spacing between sensors). Data collected at the Teller road (mile 27) site near Nome, Alaska with one probe: measuring soil temperature from 5 cm above the ground surface to 1.05 m depth (with 5 or 10 cm spacing between sensors). Additional metadata included in *.csv and *.pdf files. NGEE Arctic Project Summary: The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

ELM–Wet: Inclusion of a Wet–Landunit With Sub–Grid Representation of Eco–Hydrological Patches and Hydrological Forcing Improves Methane Emission Estimations in the E3SM Land Model (ELM)

Wetlands are the largest emitters of biogenic methane (CH 4 ) and represent the highest source of uncertainty in global CH 4 budgets. Here, we aim to improve the realism of wetland representation in the U.S. Department of Energy's Exascale Earth System Model land surface model, ELM, thereby reducing uncertainty of CH 4 flux predictions. We develop an updated version, ELM-Wet, where we activate a separate landunit for wetlands that handles multiple wetland-specific eco-hydrological patch functional types. We introduce more realistic hydrological forcing through prescribing site-level constraints on surface water elevation, which allows resolving different sustained inundation depth for different patches, and if data exists, prescribing inundation depth. We modified the calculation of aerenchyma transport diffusivity based on observed conductance per leaf area for different vegetation types. We use Bayesian Optimization to parameterize CO 2 and CH 4 fluxes in the developed wet-landunit. Site-level simulations of a coastal non-tidal freshwater wetland in Louisiana were performed with the updated model. Eddy covariance observations of CO 2 and CH 4 fluxes from 2012 to 2013 were used to train the model and data from 2021 were used for validation. Patch-specific chamber flux observations and observations of CH 4 concentration profiles in the soil porewater from 2021 were used for evaluation of the model performance. Our results show that ELM-Wet reduces the model's CH 4 emission root mean squared error by up to 33% and is able to represent inter-daily CO 2 and CH 4 flux variability across the wetland's eco-hydrological patches, including during periods of extreme dry or wet conditions.

54 ENVIRONMENTAL SCIENCES↗

Emission in closely packed Eu (TTA) 3 (DPT) and opportunities for magnetic dipole enhancement

Ultra-thin Langmuir-Blodgett films of amphiphilic complex EuTTA (DPT) with tri-valent Eu ions are highly luminescent even when deposited directly on metal. Emission kinetics obtained in bulk samples and Langmuir-Blodgett films are very different for dense and diluted systems. Here, the experiments indicate a collective emitter behavior in dense systems, which is also sensitive to metal or dielectric environments. In another experiment, using metal-emitter layer-metal structures with EuTTA(DPT) we observe significant modifications of the emission line shapes and a dramatic change in magnetic-to-electric dipole branching ratio with 10-fold relative enhancement of magnetic dipole emission.

Luminescence↗

Stream discharge and temperature data collected within the East and Taylor Watershed, Colorado for the Lawrence Berkeley National Laboratory Watershed Function Science Focus Area (water years 2019 to 2025)

This dataset contains stream discharge and temperature data for water years 2019 to 2025 from the East and Taylor Watersheds in Colorado, United States. This data was collected to understand hydrological processes occurring in the East River and Taylor River Watersheds, Colorado, which is part of the Lawrence Berkeley National Laboratory Watershed Function Scientific Focus Area. Data includes instantaneous observed discharge using salt dilution and acoustic doppler velocimeter techniques, raw pressure transducer downloaded data, sub-hourly temperature as well as corrected water level and associated stream discharge and mean daily values. Notes on water level corrections, rating curve development and metadata provided. A rating curve is the translation of depth to streamflow. The rating curve can be used as a quantitative measure of the “quality of the data.” Data within this dataset is formatted using ESS-DIVE’s Hydrological Monitoring Reporting Format. This data package contains (1) a zip file (Stream_Discharge_Data_WY19-WY25.zip) containing stream discharge and temperature data organized by location; (2) an InstallationMethods file (InstallationMethods.csv) describing metadata about the installation; (3) a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata; (4) a data dictionary (dd.csv) file that contains terms/column_headers used throughout the files along with a definition, units, and data type; (5) a locations metadata file (locations.csv); (6) and a sensor metadata file (sensors.csv). All data files are in non-proprietary formats (csv, png, or pdf formats). Please contact Rosemary Carroll, Curtis Beutler, or Austin Shirley for any support in accessing the files. Update on 2023-05-12: Additional data from WYs 2021 and 2022 were added. Additionally, the dataset was converted using ESS-DIVE’s Hydrological Monitoring Reporting Format. Data files were reformatted to match reporting format guidance, new metadata files were added, and files were converted from excel to CSV. Update on 2025-05-16: Additional data from WYs 2022 (for locations not previously included), 2023, and 2024 were added. An additional descriptive PDF (WFSFA_Streamflow_Hydrograph_Disclaimer.pdf) was added. Metadata files were updated to reflect the addition of new data and locations. Update on 2026-05-18: Additional data from WY 2025 were added, including a new location Upper Trail Creek (TR-TCG2). Metadata files were updated to reflect the addition of new data.

54 ENVIRONMENTAL SCIENCES↗

Meteorological Conditions and Atmospheric Components Concentration in Urban Sites in Knoxville, USA. 2024

This dataset, which contains five csv files, reports several meteorological conditions such as temperature, wind speed, solar radiation, and net radiation measured in Cumberland Estates Park (CEP) and Socially Equal Energy Efficient Development (SEEED) sites in Knoxville, Tennessee, USA. Also, hourly concentration of particulate matter (PM) with different aerodynamic diameter and inorganic gases such as ozone and nitrogen dioxide measured in the two are included in this dataset. The concentrations of PM and inorganic gases were monitored using the MODULAIR, a low-cost sensor equipped with a solar power module. The measurement of the concentration of biogenic and anthropogenic volatile organic compounds (VOCs) of the two sites was determined using a High-Resolution Proton Transfer Reaction Time of Flight Mass Spectrometer (PTR-ToF-MS). The VOCs were collected using miniature canister (400 mL) equipped with female RAVEqc valve to 1/4” male compression fitting and an integrated passive air sampling kit. This work is a part of a larger study which investigates the impact of soil moisture and plant evapotranspiration on ambient temperature and relative humidity in several city parks in Knoxville, Tennessee.

54 ENVIRONMENTAL SCIENCES↗

CROCUS 3-D wind data from Argonne Deployable Mast during Urban Canyon IOP July 2024

During the Community Research on Climate and Urban Science (CROCUS) Urban Integrated Field Laboratory (UIFL) project, led by Argonne National Laboratory, this dataset was collected by METEK uSonic-3 Class A MP sonic anemometer at 10 meter height of the Argonne Deployable Mast (ADM) from July 26 to July 28, 2024, .As part of the CROCUS 2024 Urban Canyon Intensive Observation Period (IOP), 3-D sonic anemometer on the ADM was set up to provide continuous measurements of wind and temperature in Chicago during July 2024. These measurements cover winds in X-, Y- and Z- direction and sonic temperature at 30-Hz resolution. The data are formatted as NetCDF (.nc) files, making them easily accessible using common software such as MATLAB, R, and Python.

54 ENVIRONMENTAL SCIENCES↗

Indicators of Global Climate Change 2023: annual update of key indicators of the state of the climate system and human influence

Intergovernmental Panel on Climate Change (IPCC) assessments are the trusted source of scientific evidence for climate negotiations taking place under the United Nations Framework Convention on Climate Change (UNFCCC). Evidence-based decision-making needs to be informed by up-to-date and timely information on key indicators of the state of the climate system and of the human influence on the global climate system. However, successive IPCC reports are published at intervals of 5–10 years, creating potential for an information gap between report cycles. We follow methods as close as possible to those used in the IPCC Sixth Assessment Report (AR6) Working Group One (WGI) report. We compile monitoring datasets to produce estimates for key climate indicators related to forcing of the climate system: emissions of greenhouse gases and short-lived climate forcers, greenhouse gas concentrations, radiative forcing, the Earth's energy imbalance, surface temperature changes, warming attributed to human activities, the remaining carbon budget, and estimates of global temperature extremes. The purpose of this effort, grounded in an open-data, open-science approach, is to make annually updated reliable global climate indicators available in the public domain. As they are traceable to IPCC report methods, they can be trusted by all parties involved in UNFCCC negotiations and help convey wider understanding of the latest knowledge of the climate system and its direction of travel. The indicators show that, for the 2014–2023 decade average, observed warming was 1.19 [1.06 to 1.30] °C, of which 1.19 [1.0 to 1.4] °C was human-induced. For the single-year average, human-induced warming reached 1.31 [1.1 to 1.7] °C in 2023 relative to 1850–1900. The best estimate is below the 2023-observed warming record of 1.43 [1.32 to 1.53] °C, indicating a substantial contribution of internal variability in the 2023 record. Human-induced warming has been increasing at a rate that is unprecedented in the instrumental record, reaching 0.26 [0.2–0.4] °C per decade over 2014–2023. This high rate of warming is caused by a combination of net greenhouse gas emissions being at a persistent high of 53±5.4 Gt CO 2 e yr -1 over the last decade, as well as reductions in the strength of aerosol cooling. Despite this, there is evidence that the rate of increase in CO 2 emissions over the last decade has slowed compared to the 2000s, and depending on societal choices, a continued series of these annual updates over the critical 2020s decade could track a change of direction for some of the indicators presented here.

54 ENVIRONMENTAL SCIENCES↗

The Importance of Freeze/Thaw Cycles on Lateral Transport in Ice-Wedge Polygons: Modeling Archive

This Modeling Archive is in support of an NGEE Arctic publication "The importance of freeze/thaw cycles on lateral transport in ice-wedge polygons". The dataset includes xml input/configuration files. These files are compatible with the ATS version 1.0 and higher. The mesh folder contains mesh files used for high-centered polygon (hcp) and low-centered polygon (lcp). The mesh files represent the transect of the polygonal tundra (Fig 1). Here we used two types of mesh with impermeable layer and without. The mesh with an impermeable layer corresponds to the synthetic permafrost (no freezeup case). The freeze up case uses mesh without impermeable layer to simulated frozen ground start at the same depth where the impermeable layer is for the no freezeup case. The meteorological data used drive the model saved in the "inputs" folder. The processed tracer flow rates are saved in the "tracer-flow-ratesCfolder. To plot figures 1 and 2, we used VisIt software. To plot all the flow rates, we used ipython notebook script. All required inputs are saved in "freezeup" and "no freezeup" folders. Each folder includes the corresponding "lcp" and "hcp" folders. The "freezeup" folder has also flat-centered polygon (fcp) case, low porosity "lpor", and low permeability "lper" cases. Included are *.xml, *.exo, *.h5, *pdf, *.ipynb, *.sh, *.py, and *.out files. NGEE Arctic Project Summary: The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Patch-level chamber-based CH4 and CO2 flux measurements in freshwater and salt marshes of coastal Louisiana

This dataset contains chamber-based carbon dioxide and methane flux measurements from ecohydrological patches in two coastal wetlands in Louisiana (within the footprint of AmeriFlux sites US-LA2 and US-LA3). Measurements span four patches, two per wetland. At the freshwater marsh (US-LA2), patches were dominated by Sagittaria lancifolia or co-dominated by Sagittaria lancifolia and Typha latifolia. At the salt marsh site (US-LA3), patches were dominated by Spartina alterniflora or Juncus roemerianus. Flux measurements included (i) wetland surface-level measurements encompassing the entire soil-water-vegetation column and (ii) soil-water surface chamber measurements that excluded emergent vegetation. At US-LA3, open-water pools were common and were also measured as a patch type. With this data we aimed to assess differences in gas flux pathways within ecohydrological patches across different wetland types. Files can be read in any program or code typical of processing .csv file types. "PatchChambers_LA2LA3.csv" covers flux data from patch level chambers which includes bulk CO2/CH4 flux encompassing water, soil, and vegetation within each chamber. "Water_Soil_SurfaceChamber_LA2LA3.csv" has CO2/CH4 flux data from chambers measuring only the water-soil surface without the effects of vegetation. Metadata can be found in the similarly named files for each data sheet ("xxxx_md.csv").

54 ENVIRONMENTAL SCIENCES↗

Hydrologic Model Data for the East Fork Poplar Creek Watershed Simulated with the Advanced Terrestrial Simulator (ATS): Streamflow and Network Expansion–Contraction Dynamics

This dataset supports hydrologic modeling and stream network expansion–contraction analysis for the East Fork Poplar Creek (EFPC) Watershed in Tennessee. It includes a Jupyter notebook for model setup, model configuration files, simulation outputs, and derived products used to evaluate model performance and investigate stream dynamics under varying hydrologic conditions. The dataset was generated using the Watershed Workflow Python package and the Advanced Terrestrial Simulator (ATS), enabling integrated surface–subsurface hydrologic simulations using a stream-aligned mesh. Outputs include high-resolution time series of streamflow, active network length, water table depth, and related hydrologic variables. Also included are spatially explicit stream persistency indices and classifications of reaches as perennial or non-perennial. These data facilitate reproducibility and support further research on stream intermittency and variability in network extent.The model data archive is organized in following directories:1) model_setup_inputsContains the Watershed Workflow Jupyter notebooks (accessed through any open source code editor), selected input datasets, and resulting ATS input files, including XML files (access through any open source code editor), computational mesh (.exo files can be viewed using Paraview), and meteorological forcing files (.h5 files can be accessed through h5py python package and HDFView open source software). 2) model_outputsIncludes ATS simulation outputs relevant to this study. Time series of spatially integrated or averaged variables (e.g., streamflow, water table depth) are provided as CSV files. Select spatial fields (e.g., ponded depth and water table depth) are saved as pickled Python objects to reduce file size, and can be accessed through pickle package in Python. Key geometry objects from Watershed Workflow—such as the surface mesh and river tree—are also included to support analysis of streamflow persistency and expansion–contraction dynamics. These files can also be accessed through Watershed Workflow Python package.3) model_evaluationProvides observed streamflow time series and field survey-based flow regime classifications used to evaluate model performance. Jupyter notebooks for processing ATS outputs and comparing model predictions with observations to build confidence in the model prior to scientific analysis are also included.4) Q_L_relationshipsContains workflows for generating time series of discharge, active network length, and related hydrologic variables used in the stream network expansion–contraction analysis. Includes routines for delineating baseflow-dominated periods. For each catchment, notebooks and processed data (as pickled DataFrames accessed through Pandas Python package) are provided. 5) figure_scriptsProvides the Jupyter notebooks used to generate the figures presented in the paper.

54 ENVIRONMENTAL SCIENCES↗

A Multi-Sensor Unoccupied Aerial System Improves Characterization of Vegetation Composition and Canopy Properties in the Arctic Tundra: Supporting Data

Remote sensing data collected from Brookhaven National Laboratory's (BNL) heavy-lift unoccupied aerial system (UAS) octocopter platform - the Osprey - operated by the Terrestrial Ecosystem Science and Technology (TEST) group. Data was collected from a single flight over the Kougarok hillslope site on 26 July, 2018. The Osprey is a multi-sensor UAS platform that simultaneously measures very high spatial resolution optical red/green/blue (RGB) and thermal infrared (TIR) surface "skin" temperature imagery, as well as surface reflectance at 1nm intervals in the visible to near-infrared spectral range from ~350-1000 nm measured at regular intervals along each flight path. Derived image products include ortho-mosaiced RGB and TIR images, an RGB-based digital surface model (DSM) using the structure from motion (SfM) technique, digital terrain model (DTM), and a canopy height model. Ancillary aircraft data, flight mission parameters, and general flight conditions are also included. This dataset includes *.pdf, *.txt, *.tif, *.dat, and *.csv with most zipped in *.tar.gz files. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗