Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXACT SOLUTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A regression technique for evaluation and quantification for water quality parameters from remote sensing data

The objective of this paper is to define optical physics and/or environmental conditions under which the linear multiple-regression should be applicable. An investigation of the signal-response equations is conducted and the concept is tested by application to actual remote sensing data from a laboratory experiment performed under controlled conditions. Investigation of the signal-response equations shows that the exact solution for a number of optical physics conditions is of the same form as a linearized multiple-regression equation, even if nonlinear contributions from surface reflections, atmospheric constituents, or other water pollutants are included. Limitations on achieving this type of solution are defined.

Whitlock, C. H.↗
NASA NTRS1978

A critical evaluation of the minimization techniques as applied to nonlinear structural analyses

This paper identifies the potential for unconstrained minimization algorithms of mathematical programming to be cost-effective with other conventional techniques of transient nonlinear structural analysis. With this in mind the authors have attempted to critically evaluate a few of the most commonly used algorithms for their effectiveness in solving structural problems involving geometric and material nonlinearities. The algorithms have been categorized as being zeroth order, first order and second order depending upon the order of the derivative of the function called for by the algorithm. The sensitivity of these algorithms to the accuracy of derivatives derived on the basis of finite difference operations clearly suggest using analytically derived derivatives to obtain better control on the number of minimizations required for convergence to the exact solution.

Kamat, M. P.↗
NASA NTRS1978

Lifting-line theory of oblique wings

The study extends Prandtl's lifting-line theory to planar wings involving swept and curved centerlines. Attention is focused on distinct features of such a theory, with special emphasis on an oblique wing in a steady incompressible potential flow. The analysis presented is compared with exact solutions derived from an inverse method and with results from a panel method.

Cheng, H. K.↗
NASA NTRS1979

Comptonization of X-rays by low-temperature electrons

A method is described for calculating the spectrum that results from the Compton scattering of a monochromatic source of X-rays by low-temperature electrons, both for initial-value relaxation problems and for steady-state spatial diffusion problems. The method gives an exact solution of the inital-value problem for evolution of the spectrum in an infinite homogeneous medium if Klein-Nishina corrections to the Thomson cross section are neglected. This, together with approximate solutions for problems in which Klein-Nishina corrections are significant and/or spatial diffusion occurs, shows spectral structure near the original photon wavelength that may be used to infer physical conditions in cosmic X-ray sources. Explicit results, shown for examples of time relaxation in an infinite medium and spatial diffusion through a uniform sphere, are compared with results obtained by Monte Carlo calculations and by solving the appropriate Fokker-Planck equation.

Illarionov, A.↗
NASA NTRS1979

Theory of the large-amplitude plane magnetoacoustic wave propagating transverse to the magnetic field in a hot collisionless plasma

An exact solution of the kinetic and electromagnetic equations for a large-amplitude plane magnetoacoustic wave propagating transverse to the magnetic field in a hot collisionless plasma is presented. The solution gives simple relations among the magnetic-field strength, density, stress tensor, and plasma velocity, all of which are measurable in the interplanetary plasma. These relations are independent of the electron and ion velocity distributions, subject to certain restrictions on 'high-velocity tails.' The magnetic field of the wave is linearly polarized. The wave steepens to form a shock much as the analogous waves of MHD theory do.

Barnes, A.↗
NASA NTRS1979

Some calculations bearing on the heating and cooling of quiescent prominences

The evolution of heat along and perpendicular to magnetic fields threading quiescent prominences is discussed. It was shown that while heating of prominence material can occur on a time scale of the order of 1000's, individual flux tubes are effectively thermally insulated from neighboring tubes, since the transverse heat conduction time scale is of the order of 10000 per year. The exact solution to the one-dimensional parallel heat conduction problem is shown to differ significantly from the approximate solution of Ioshpa (1965). It was suggested that uneven heating of a quiescent prominence by the surrounding solar corona may contribute to surges and/or the 'winking' phenomenon recorded in many quiescent prominences. The signature of such a temperature pulse would be a sharp brightening of continuum radiation with a correlated decrease in the free-bound emission, followed by a slow recovery of both to their pre-heat pulse levels.

Lerche, I.↗
NASA NTRS1979

Surface wave diffraction by a truncated dielectric slab recessed in a perfectly conducting surface

The diffraction of a TM sub 0 surface wave by a terminated dielectric slab which is flush mounted in a perfectly conducting surface is studied. The incident surface wave gives rise to waves reflected and diffracted by the termination; these reflected and diffracted fields may be expressed in terms of the geometrical theory of diffraction by introducing surface wave reflection and diffraction coefficients which are associated with the termination. In this investigation the surface wave reflection and diffraction coefficients have been deduced from a formally exact solution to this canonical problem. The solution is obtained via a combination of the generalized scattering matrix technique and the Wiener-Hopf procedure. Expressions for the reflection and diffraction coefficients contain integrals which can be evaluated numerically.

Pathak, P. H.↗
NASA NTRS1979

Analysis of the interaction of an electron beam with a solar cell. III - The effect of spacial variations of the number density of recombination centers on SEM measurements

By means of an exactly soluble model the short circuit current generated by a scanning electron microscope in a P-N junction has been determined in cases where the trap density is inhomogeneous. The diffusion length for minority carriers becomes then dependent on the spacial coordinates. It is shown that in this case the dependence of the Isc on characteristic parameters as cell thickness, distance of the beam excitation spot from ohmic contacts, etc., becomes very intricate. This fact precludes the determination of the local diffusion length in the usual manner. Although the model is somewhat simplified in order to make it amenable to exact solutions, it is nevertheless realistic enough to lead to the conclusion that SEM measurements of bulk transport parameters in inhomogeneous semiconductor material are impractical since they may lead to serious errors in the interpretation of the data by customary means.

Von Roos, O.↗
NASA NTRS1979

Aircraft control by propeller cyclic blades

A theory is developed for aircraft control obtained from the propeller forces and moments generated by blade angle variation during a blade revolution. The propeller blade is pitched harmonically one cycle per propeller revolution which results in vehicle control forces and moments, termed cyclic-control. Using a power series respresentation of an arbitrary function of cyclic-blade angle, cyclic-control theory is developed which leads to exact solutions in terms of derivatives of steady-state thrust and power with respect to blade angle. An alternative solution, when the cyclic-blade angle function is limited to a sinusoidal cycle, is in terms of Bessel functions. An estimate of non-steady azimuth angle change or lag is presented. Cyclic-control analysis applied to the counter-rotating propeller shows that control forces or moments can be uniquely isolated from each other. Thus the dual rotor, in hovering mode, has propulsion without rotor tilt or moments, or, when in propeller mode at the tail of an air ship or submarine, vehicle control with no vehicle movement. Control isolation is also attainable from three or more propellers in-line.

Deyoung, J.↗
NASA NTRS1979

The Inertia Coefficients of an Airship in a Frictionless Fluid

The apparent inertia of an airship hull is examined. The exact solution of the aerodynamical problem is studied for hulls of various shapes with special attention given to the case of an ellipsoidal hull. So that the results for the ellipsoidal hull may be readily adapted to other cases, they are expressed in terms of the area and perimeter of the largest cross section perpendicular to the direction of motion by means of a formula involving a coefficient kappa which varies only slowly when the shape of the hull is changed, being 0.637 for a circular or elliptic disk, 0.5 for a sphere, and about 0.25 for a spheroid of fineness ratio. The case of rotation of an airship hull is investigated and a coefficient is defined with the same advantages as the corresponding coefficient for rectilinear motion.

Bateman, H.↗
NASA NTRS1980

Further investigation of a finite difference procedure for analyzing the transonic flow about harmonically oscillating airfoils and wings

Analytical and empirical studies of a finite difference method for the solution of the transonic flow about harmonically oscillating wings and airfoils are presented. The procedure is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady equations for small disturbances. The steady velocity potential is obtained first from the well-known nonlinear equation for steady transonic flow. The unsteady velocity potential is then obtained from a linear differential equation in complex form with spatially varying coefficients. Since sinusoidal motion is assumed, the unsteady equation is independent of time. An out-of-core direct solution procedure was developed and applied to two-dimensional sections. Results are presented for a section of vanishing thickness in subsonic flow and an NACA 64A006 airfoil in supersonic flow. Good correlation is obtained in the first case at values of Mach number and reduced frequency of direct interest in flutter analyses. Reasonable results are obtained in the second case. Comparisons of two-dimensional finite difference solutions with exact analytic solutions indicate that the accuracy of the difference solution is dependent on the boundary conditions used on the outer boundaries. Homogeneous boundary conditions on the mesh edges that yield complex eigenvalues give the most accurate finite difference solutions. The plane outgoing wave boundary conditions meet these requirements.

Weatherill, W. H.↗
NASA NTRS1979

Analysis of beam-like lattice trusses

A simple procedure is presented for predicting the thermoelastic and free vibration responses of large repetitive beam-like trusses. The procedure is based on replacing the original lattice structure by an equivalent continuum beam model and obtaining closed-form (exact) solutions for the beam model. The equivalent beam model accounts for warping and shear deformation in the plane of the cross-section and is characterized by its thermoelastic strain and kinetic energies, from which the equations of motion and constitutive relations can be derived. The high accuracy of the results obtained by the proposed approach is demonstrated by means of numerical examples.

Noor, K.↗
NASA NTRS1979

A regression technique for evaluation and quantification for water quality parameters from remote sensing data

The paper attempts to define optical physics and/or environmental conditions under which the linear multiple-regression should be applicable. It is reported that investigation of the signal response shows that the exact solution for a number of optical physics conditions is of the same form as a linearized multiple-regression equation, even if nonlinear contributions from surface reflections, atmospheric constituents, or other water pollutants are included. Limitations on achieving this type of solution are defined. Laboratory data are used to demonstrate that the technique is applicable to water mixtures which contain constituents with both linear and nonlinear radiance gradients. Finally, it is concluded that instrument noise, ground-truth placement, and time lapse between remote sensor overpass and water sample operations are serious barriers to successful use of the technique.

Whitlock, C. H.↗
NASA NTRS1980

Characterization of acoustic disturbances in linearly sheared flows

Inviscid fluctuations in a compressible linearly sheared, but otherwise homogeneous, parallel two-dimensional flow are considered. The equation describing the plane wave propagation (PWP), the stability, or the rectangular duct mode characteristics in such a flow is shown to be reducible to Whittaker's equation. The exact solutions are applied to problems of PWP and stability in linearly sheared flows as limiting cases in which the speed of sound goes to infinity (incompressible limit) or the shear layer thickness, or wave number, goes to zero (vortex sheet limit). With respect to the PWP it is shown that the shear layer possesses no resonances and no Brewster angles, while with regard to the problem of the stability of a finite thickness shear layer with a linear velocity profile, it is shown that the thin layer is unstable to long wavelength disturbances for all Mach numbers.

Koutsoyannis, S. P.↗
NASA NTRS1980

Buckling of periodic structures

Equations are developed for the buckling of a general lattice structure that has repetitive geometry. Equilibrium at a typical node is expressed using finite element techniques, and the only assumption is that the response is periodic. By basing the stiffness matrix on the exact solution of the beam column equation, accurate results are obtained for complex buckling behavior that would require a very large system of equations using conventional techniques. The present method requires the eigenvalues of only a 6x6 determinant. The results are used to study the buckling of isogrid cylinders, three-element truss columns and polygonal rings. Details of the analysis including expressions for all terms in the governing stability determinant are given.

Anderson, M. S.↗
NASA NTRS1980

Higher order farfield drag minimization for a subcritical wing design code

A higher order Trefftz plane model of the undistorted interacting wing wakes of two symmetric subsonic planforms has been developed and integrated with an existing vortex lattice wing design code. The Trefftz plane calculation provides continuous, piecewise quadratically varying bound circulations, which are then interpolated in the nearfield vortex lattice representation of the wing. Integration of the surface slopes for a specified chord loading function provides the design wing camber surfaces. This paper outlines the theoretical development and presents comparisons between results obtained using the present theory and (1) previous exact solutions for minimum induced drag and (2) previous wing designs obtained using a discrete vortex wake moded.

Kuhlman, J. M.↗
NASA NTRS1980

The heating of a thermally conducting stratified medium. I - Self-gravitating gas threaded by magnetic fields

Two theoretical problems are presented to illustrate the equilibrium structure of a gravitating gas threaded by magnetic fields. The gas is heated everywhere at a rate proportional to the local density and cooled by thermal conduction channeled along the magnetic field. Emphasis is placed on the influence of anisotropic thermal conduction on the distribution of the gas. In the first problem, the magnetic field has straight field lines that are nearly parallel. The simple field line geometry allows us to calculate, in closed form, the equilibria configurations of a gas slab which is cooled nonuniformly by thermal conduction along field lines which leave the gas slab at varying angles. The problem involves the gas having a free boundary, which is one of the unknowns to be determined. A discussion is given of the set of all possible equilibria so constructed. In the second problem there is no electric current flowing in the gas but there is a potential magnetic field having curved field lines. Exact solutions of equilibriums are presented to illustrate the heating of stellar and galactic coronas.

Lerche, I.↗
NASA NTRS1980

A new look at numerical analyses of free-edge stresses in composite laminates

The edge stress problem for a + or - 45 deg graphite/epoxy laminate was examined. The reliability of the displacement formulated finite element method in analyzing the edge stress problem was investigated. Analyses of two well known elasticity problems, one involving a stress discontinuity and one a singularity, showed that the finite element analysis yields accurate stress distributions everywhere except in two elements closest to the stress discontinuity of singularity. Stress distributions for a + or - 45 deg laminate showed the same behavior near the singularity found in the well known problems with exact solutions. The displacement formulated finite element method appears to be a highly accurate technique for calculating interlaminar stress in composite laminates. The disagreement among the numerical methods was attributed to the unsymmetric stress tensor at the singularity.

Raju, I. S.↗