Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Discrete sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Some aspects of high-order numerical solutions of the linear convection equation with forced boundary conditions

A six-stage low-storage Runge-Kutta time-marching method is presented and shown to be an efficient method for use with high-accuracy spatial difference operators for wave propagation problems. The accuracy of the method for inhomogeneous ordinary differential equations is demonstrated through numerical solutions of the linear convection equation with forced boundary conditions. Numerical experiments are presented simulating a sine wave and a Gaussian pulse propagating into and through the domain. For practical levels of mesh refinement corresponding to roughly ten points per wavelength, the six-stage Runge-Kutta method is more accurate than the popular fourth-order Runge-Kutta method. Further numerical experiments are presented which show that the numerical boundary scheme at an inflow boundary can be a significant source of error when high-accuracy spatial discretizations are used.

Zingg, D. W.↗

The X-ray emission of galaxies

Results from several satellite observations are used to discuss the discrete emission component of galaxies, including bright binary sources, supernova and supernova remnants. Through X-ray observations, direct evidence of the chemical and dynamical interactions between galaxies and the surrounding medium can be obtained. Although the X-ray emission represents only a small fraction of the bolometric emission of a normal galaxy, it allows the study of the system's component to be performed. The results on low luminosity active galactic nuclei are also discussed.

Fabbiano, G.↗

Portable laser synthesizer for high-speed multi-dimensional spectroscopy

Portable, field-deployable laser synthesizer devices designed for multi-dimensional spectrometry and time-resolved and/or hyperspectral imaging include a coherent light source which simultaneously produces a very broad, energetic, discrete spectrum spanning through or within the ultraviolet, visible, and near infrared wavelengths. The light output is spectrally resolved and each wavelength is delayed with respect to each other. A probe enables light delivery to a target. For multidimensional spectroscopy applications, the probe can collect the resulting emission and deliver this radiation to a time gated spectrometer for temporal and spectral analysis.

47 OTHER INSTRUMENTATION↗

Improved mesh based photon sampling techniques for neutron activation analysis

The design of fusion power systems requires analysis of neutron activation of large, complex volumes, and the resulting particles emitted from these volumes. Structured mesh-based discretization of these problems allows for improved modeling in these activation analysis problems. Finer discretization of these problems results in large computational costs, which drives the investigation of more efficient methods. Within an ad hoc subroutine of the Monte Carlo transport code MCNP, we implement sampling of voxels and photon energies for volumetric sources using the alias method. The alias method enables efficient sampling of a discrete probability distribution, and operates in 0(1) time, whereas the simpler direct discrete method requires 0(log(n)) time. By using the alias method, voxel sampling becomes a viable alternative to sampling space with the 0(1) approach of uniformly sampling the problem volume. Additionally, with voxel sampling it is straightforward to introduce biasing of volumetric sources, and we implement this biasing of voxels as an additional variance reduction technique that can be applied. We verify our implementation and compare the alias method, with and without biasing, to direct discrete sampling of voxels, and to uniform sampling. We study the behavior of source biasing in a second set of tests and find trends between improvements and source shape, material, and material density. Overall, however, the magnitude of improvements from source biasing appears to be limited. Future work will benefit from the implementation of efficient voxel sampling - particularly with conformal unstructured meshes where the uniform sampling approach cannot be applied. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A generalized method for optimization of active noise controllers in three-dimensional spaces

In this investigation, the formulation of an optimal active noise controller for harmonic, enclosed sound fields is derived using an indirect boundary element method. The optimal active noise controller is defined as the volume velocity secondary source strengths which minimize the sound pressure level at a number of discrete interior locations. In addition, the formulation of an optimal active noise controller which minimizes the free field power radiated from a generalized, distributed noise source is presented. Representative results are provided for each formulation. For the enclosure problem, results are given for global control, local control, and passive wall treatments using a rectangular cavity. For the free field radiation problem, the effects of secondary source location and quantity on active noise controller performance are investigated. The relative merits of each formulation are discussed.

Mollo, C. G.↗

KEPLER OBSERVATIONS OF THE SEYFERT 1 GALAXY II ZW 229.015

The Seyfert 1 galaxy II ZW 229.015 has been observed with the Kepler spacecraft since quarter 4 of Kepler science operations. The results of the quarters 4-7 (1 year) Kepler observations are presented in this paper. We find the source to be highly variable on multiple timescales, with discrete variations occurring on timescales as short as tens of hours with amplitudes as small as 0.5%. Such small amplitude, rapid variability has never before been detected in active galactic nuclei. The presence of a strong galaxy component dilutes the variability determined from the photometric aperture used in the standard Kepler PDC analysis. Using the tools provided by the Kepler Guest Observer Office and simultaneous V-band photometry found in the literature, we determine an optimal customized aperture for photometry of this source with Kepler. The results of a PSRESP analysis reveal tentative evidence of a characteristic variability timescale in the power spectrum. Using this timescale, we estimate the mass of the central supermassive black hole and this estimate is consistent with the virial mass estimate from reverberation mapping studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Acoustic positioning for space processing experiments

An acoustic positioning system is described that is adaptable to a range of processing chambers and furnace systems. Operation at temperatures exceeding 1000 C is demonstrated in experiments involving the levitation of liquid and solid glass materials up to several ounces in weight. The system consists of a single source of sound that is beamed at a reflecting surface placed a distance away. Stable levitation is achieved at a succession of discrete energy minima contained throughout the volume between the reflector and the sound source. Several specimens can be handled at one time. Metal discs up to 3 inches in diameter can be levitated, solid spheres of dense material up to 0.75 inches diameter, and liquids can be freely suspended in l-g in the form of near-spherical droplets up to 0.25 inch diameter, or flattened liquid discs up to 0.6 inches diameter. Larger specimens may be handled by increasing the size of the sound source or by reducing the sound frequency.

Whymark, R. R.↗

Optical Properties of Copper-Doped Lithium Niobate Crystals

We have studied the optical properties of copper-doped lithium niobate crystals using semiconductor light-emitting diodes and lasers emitting in the visible and ultraviolet spectral regions as excitation sources. The results demonstrate that, at an excitation frequency approaching the frequency of electronic absorption in copper ions, there is discrete resonance Raman scattering in the form of a frequency comb. The observed Raman satellites of discrete light scattering are due to polar longitudinal A{sub 1} optical modes of the lithium niobate single crystal. Under excitation by a light-emitting diode with a wavelength of 520 nm, we observe a sharp increase in discrete light scattering intensity in comparison with the photoluminescence excited by shorter wavelength excitation sources.

36 MATERIALS SCIENCE↗

A Test Problem for Codes Solving the Discretized Diffusion Equation in Cartesian Geometry Derived Via Discrete Green’s Functions

We obtain here a solution to a zone-centered discretization of the one dimensional time-dependent diffusion equation with arbitrary initial conditions and source, constant absorption and scattering opacity, and constant zone size and time step. The solution is obtained using the discrete Green’s functions of the discretized equation. The solution of the discretized equation is useful in the testing of computer codes, because the code can be expected to agree with the solution to the discrete equation, to within small errors caused by roundoff. This is in contrast to solutions of the differential equation, with which the code results only approximately agree. Finally, the usefulness of the solution for tests of an inertial confinement fusion code is demonstrated.

97 MATHEMATICS AND COMPUTING↗

Construction of a Fluid Flowfield from Discrete Point Data using Machine Learning

Many verification and validation procedures in aerospace engineering involve the comparison of computational fluid dynamics (CFD) data to experimental results from sources like wind tunnel tests. However, an incongruity exists between the data available from these sources: flow visualization is available by default in computational data, whereas in most experimental setups the available data is far more discrete and far more limited: integrated forces and moments, discrete pressure and temperature probes, etc. When differences exist between quantities of interest like lift and drag coefficients, the lack of full-field flow data from the experiments complicates most attempts to reconcile why the different data sources disagree. To this end, a shallow neural network, constrained by certain fluid flow properties, was trained to approximate flow field snapshots given only discrete data like that available in a wind tunnel test. The constructed snapshots, even for complex incompressible fluid flows, were found to agree at the large scales with the true flow fields. With this tool, researchers can more readily and easily understand why quantities of interest differ between their experimental and computational datasets. This in turn improves the resulting data's uncertainty measures.

Yury Lebedev↗

Construction of a Fluid Flowfield from Discrete Point Data using Machine Learning

Many verification and validation procedures in aerospace engineering involve the comparison of computational fluid dynamics (CFD) data to experimental results from sources like wind tunnel tests. However, an incongruity exists between the data available from these sources: flow visualization is available by default in computational data, whereas in most experimental setups the available data is far more discrete and far more limited: integrated forces and moments, discrete pressure and temperature probes, etc. When differences exist between quantities of interest like lift and drag coefficients, the lack of full-field flow data from the experiments complicates most attempts to reconcile why the different data sources disagree. To this end, a shallow neural network, constrained by certain fluid flow properties, was trained to approximate flow field snapshots given only discrete data like that available in a wind tunnel test. The constructed snapshots, even for complex incompressible fluid flows, were found to agree at the large scales with the true flow fields. With this tool, researchers can more readily and easily understand why quantities of interest differ between their experimental and computational datasets. This in turn improves the resulting data's uncertainty measures.

Yury Lebedev↗

Priority for empirical methods development

Several noise sources combine to make up the total helicopter noise spectrum. The sources that are most important to community annoyance are the tail rotor (discrete), main rotor (unsteady), and engine (unsteady). The periodic and broadband noise components of the helicopter rotor were enumerated, and an approach to rotorcraft noise prediction was discussed. Helicopter noise sources were prioritized, and design improvements to reduce noise were reviewed. Main rotor noise is believed to be the key to quieter helicopters since there are proven and relatively inexpensive ways to handle the tail rotor. Blade Vortex Interaction (BVI) noise is a problem to some extent with all helicopters, particularly in the descent mode. Methodology must be developed to allow forecast and control of this type of noise. Additional means of controlling it, such as reduced rotor speeds for terminal operations should also be pursued because they may be the most effective means of control and they apply to all helicopter models. Main rotor broadband noise is the limiting factor in overall helicopter noise generation. Development of semi-empirical methods to predict its behavior is necessary if results are to be achieved in the short time period available.

King, R. J.↗

On the large scale structure of X-ray background sources

The large scale clustering of the sources responsible for the X-ray background is discussed, under the assumption of a discrete origin. The formalism necessary for calculating the X-ray spatial fluctuations in the most general case where the source density contrast in structures varies with redshift is developed. A comparison of this with observational limits is useful for obtaining information concerning various galaxy formation scenarios. The calculations presented show that a varying density contrast has a small impact on the expected X-ray fluctuations. This strengthens and extends previous conclusions concerning the size and comoving density of large scale structures at redshifts 0.5 between 4.0.

Bi, H. G.↗

Learning Hidden Structure in Multi-Fidelity Information Sources for Efficient Uncertainty Quantification (LDRD 218317)

This report summarizes the work done under the Laboratory Directed Research and Development (LDRD) project entitled "Learning Hidden Structure in Multi-Fidelity Information Sources for Efficient Uncertainty Quantification". In this project we investigated multi-fidelity strategies for fusing data from information sources of varying cost and accuracy. Most existing strategies exploit hierarchical relationships between models, for example that occur when different models are generated by refining a numerical discretization parameter. In this work we focused on encoding the relationships between information sources using directed acyclic graphs. The multi-fidelity networks can have general structure and represent a significantly greater variety of modeling relationships than recursive networks used in the current state literature. Numerical results show that a non-hierarchical multi-fidelity Monte Carlo strategy can reduce the cost of estimating uncertainty in predictions of a model of plasma expanding in a vacuum by almost two orders of magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Verification & Validation of High-Order Short-Characteristics-Based Deterministic Transport Methodology on Unstructured Grids

The research team has developed a practical, high-order, discrete-ordinates, short characteristics neutron transport code for three-dimensional configurations represented on unstructured tetrahedral grids that can be used for realistic reactor physics applications at both the assembly and core levels. This project will perform a comprehensive verification and validation of this new computational tool against both a continuous-energy Monte Carlo simulation (e.g. MCNP) and experimentally measured data, an essential prerequisite for its deployment in reactor core modeling. Verification is divided into three phases. The team will first conduct spatial mesh and expansion order refinement studies to monitor convergence of the numerical solution to reference solutions. This is quantified by convergence rates that are based on integral error norms computed from the cell-by-cell difference between the code’s numerical solution and its reference counterpart. The latter is either analytic or very fine- mesh numerical solutions from independent computational tools. For the second phase, the team will create a suite of code-independent benchmark configurations to enable testing the theoretical order of accuracy of any particular discretization of the discrete ordinates approximation of the transport equation. For each tested case (i.e. mesh and spatial approximation order), researchers will execute the code and compare the resulting numerical solution to the exact solution on a per cell basis to determine the distribution of the numerical error. The final activity comprises a comparison to continuous-energy Monte Carlo solutions for zero-power critical configuration measurements at Idaho National Laboratory’s Advanced Test Reactor (ATR). Results of this comparison will allow the investigators to distinguish between modeling errors and the above-listed discretization errors introduced by the deterministic method, and to separate the sources of uncertainty.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Deterministic absorbed dose estimation in computed tomography using a discrete ordinates method

Purpose: Organ dose estimation for a patient undergoing computed tomography (CT) scanning is very important. Although Monte Carlo methods are considered gold-standard in patient dose estimation, the computation time required is formidable for routine clinical calculations. Here, the authors instigate a deterministic method for estimating an absorbed dose more efficiently. Methods: Compared with current Monte Carlo methods, a more efficient approach to estimating the absorbed dose is to solve the linear Boltzmann equation numerically. In this study, an axial CT scan was modeled with a software package, Denovo, which solved the linear Boltzmann equation using the discrete ordinates method. The CT scanning configuration included 16 x-ray source positions, beam collimators, flat filters, and bowtie filters. The phantom was the standard 32 cm CT dose index (CTDI) phantom. Four different Denovo simulations were performed with different simulation parameters, including the number of quadrature sets and the order of Legendre polynomial expansions. A Monte Carlo simulation was also performed for benchmarking the Denovo simulations. A quantitative comparison was made of the simulation results obtained by the Denovo and the Monte Carlo methods. Results: The difference in the simulation results of the discrete ordinates method and those of the Monte Carlo methods was found to be small, with a root-mean-square difference of around 2.4%. It was found that the discrete ordinates method, with a higher order of Legendre polynomial expansions, underestimated the absorbed dose near the center of the phantom (i.e., low dose region). Simulations of the quadrature set 8 and the first order of the Legendre polynomial expansions proved to be the most efficient computation method in the authors’ study. The single-thread computation time of the deterministic simulation of the quadrature set 8 and the first order of the Legendre polynomial expansions was 21 min on a personal computer. Conclusions: The simulation results showed that the deterministic method can be effectively used to estimate the absorbed dose in a CTDI phantom. The accuracy of the discrete ordinates method was close to that of a Monte Carlo simulation, and the primary benefit of the discrete ordinates method lies in its rapid computation speed. It is expected that further optimization of this method in routine clinical CT dose estimation will improve its accuracy and speed.

07 ISOTOPE AND RADIATION SOURCES↗