Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffractive production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Decomposition of W(CO)[subscript 6] at high pressures and temperatures

The decomposition of hexacarbonyltungsten, W(CO){sub 6}, has been studied. The decomposition was induced by heating W(CO){sub 6} in an autoclave at 523 K and pressures up to 1.8 MPa, and by laser heating in a diamond anvil cell at pressures between 5 and 18 GPa. The products have been characterized using synchrotron X-ray diffraction, pair distribution function analysis, Raman spectroscopy and scanning electron microscopy. Decomposition in the autoclave at the lower pressures resulted in the formation of a metastable tungsten carbide, W{sub 2}C, with an average particle size of 1-2 nm, and an unidentified nanocrystalline tungsten oxide and nanocrystalline graphite with average particle sizes of 1-2 and 11 nm, respectively. The existence of nanocrystalline graphite was deduced from micro-Raman spectra and the graphite particle size was extracted from the intensities of the Raman modes. The high-pressure decomposition products obtained in the diamond anvil cell are the monoclinic tungsten oxide phase WO{sub 2} and the high-pressure phase W{sub 3}O{sub 8}(I). The approximate average size of the graphite particles formed here was 6-8 nm. The bulk modulus of W(CO){sub 6} is B{sub 0} {approx_equal} 13 GPa.

36 MATERIALS SCIENCE↗

Ordered Mesoporous Silicon Through Magnesium Reduction of Polymer Templated Silica Thin Films

This paper describes the process of making ordered mesoporous silicon (Si) thin films. The process begins with mesoporous silica (SiO{sub 2}) thin films that are produced via evaporation induced self-assembly (EISA) using sol-gel silica precursors with a diblock copolymer template. This results in a film with a cubic lattice of 15 nm diameter pores and 10 nm thick walls. The silicon is produced through reduction of the silica thin films in a magnesium (Mg) vapor at 675 {sup o}C. Magnesium reduction preserves the ordered pore-solid architecture but replaces the dense silica walls with 10--17 nm silicon crystallites. The resulting porous silicon films are characterized by a combination of low and high angle X-ray diffraction, combined with direct SEM imaging. The result is a straightforward route to the production of ordered nanoporous silicon.

36 MATERIALS SCIENCE↗

Primary Objective Grating Astronomical Telescope

It has been 370 years since a seventeenth century French mathematician, Mersenne, presciently sketched out an astronomical telescope based on dual parabolic reflectors. Since that time the concept of the primary objective has been virtually unchanged. Now a new class of astronomical telescope with a primary objective grating (POG) has been studied as an alternative. The POG competes with mirrors, in part, because diffraction gratings provide the very chromatic dispersion that mirrors defeat. The resulting telescope deals effectively with long-standing restrictions on multiple object spectroscopy (MOS). Other potential benefits include unprecedented apertures and collection areas. The new design also favors space deployment as a gossamer membrane. The inventor, Tom Ditto, first discovered that higher-order diffraction images contain hidden depth cues, for which he was granted a seminal range finding patent in 1987. Subsequently, he invented and patented 3D localizers, profilometers and microscopes using POGs. The POG telescope was placed in the public domain to expedite research. The function of a telescopes primary objective is to collect flux and to deliver images. Both functions dictate that size matters, and bigger is better. For that reason, there has been a steady push over the past century to ramp up the size of the primary mirror. However, for every doubling of mirror diameter, the elapsed time between initial effort and first light has also doubled. Meanwhile, costs escalated beyond the mirror alone, because larger instruments required larger enclosures and better pointing mechanisms. One key catalog of observation, spectrographic data, is far more difficult to amass than two-dimensional imagery. While the number of observable objects has increased with mirror size, the capacity to take spectra has not increased proportionately. In the best of circumstances, spectrograms are available for one per cent of the all objects surveyed. Spectroscopy was a historical afterthought introduced in the nineteenth century shortly after the invention of the diffraction grating and over a century after Newtons 1670 telescope. Spectroscopy is generally accomplished using a diffraction grating as the disperser in the secondary. The light being delivered to the spectrograph is first captured by a primary mirror which provides no chromatic magnification by itself. Sizeable spectrographs could not be deployed while diffraction gratings were rare commodities scribed using mechanical ruling engines that produced one grating line at a time. Today diffraction gratings are commonplace. Their recent availability is a product of both the invention of holography and the mass replication of surface microstructures. Holography permits all lines in a grating to be made simultaneously in a single photographic exposure. Holograms can then be reproduced by embossing processes. The improvement in replication is analogous to how Gutenberg changed the availability of books. The masters may be expensive, but the copies are not. Computer science is another technology that emerged in the second half of the twentieth century without which our proposed spectrographic instrument could not function due to the complexity of image processing required in data reduction. The employment of very large diffraction gratings as primary objectives for astronomical telescopes requires a novel

spectroscopy↗

Improved microstructure of cement-based composites through the addition of rock wool particles

Rock wool is an inorganic fibrous substance produced by steam blasting and cooling molten glass. As with other industrial by-products, rock wool particles can be used as cementitious materials or ultra fine fillers in cement-based composites. This study investigated the microstructure of mortar specimens produced with cement-based composites that include various forms of rock wool particles. It conducted compressive strength testing, rapid chloride penetration tests, X-ray diffraction analysis, thermo-gravimetric analysis, and scanning electronic microscopy to evaluate the macro- and micro-properties of the cement-based composites. Test results indicate that inclusion of rock wool particles in composites improved compressive strength and reduced chloride ion penetration at the age of 91 days due to the reduction of calcium hydroxide content. Microscopic analysis confirms that the use of rock wool particles contributed to the formation of a denser, more compact microstructure within the hardened paste. In addition, X-ray diffraction analysis shows few changes in formation of pozzolanic reaction products and no new hydrations are formed with incorporating rock wool particles. - Highlights: • We report the microstructural characterization of cement-based composites. • Different mixes produced with various rock wool particles have been tested. • The influence of different mixes on macro and micro properties has been discussed. • The macro properties are included compressive strength and permeability. • XRD and SEM observations confirm the pozzolanic reaction in the resulting pastes.

36 MATERIALS SCIENCE↗

Tapioca starch: An efficient fuel in gel-combustion synthesis of photocatalytically and anti-microbially active ZnO nanoparticles

Zinc oxide nanoparticles were synthesized by gel-combustion method using novel bio-fuel tapioca starch pearls, derived from the tubers of Manihotesculenta. The product is characterized using various techniques. The X-ray diffraction pattern correspond to a hexagonal zincite structure. Fourier transform infrared spectrum showed main absorption peaks at 394 and 508 cm{sup −} {sup 1} due to stretching vibration of Zn–O. Ultravoilet–visible spectrum of zinc oxide nanoparticles showed absorption maximum at 373 nm whereas the maximum of the bulk zinc oxide was 377 nm. The morphology of the product was studied using scanning electron microscopy and transmission electron microscopy. The scanning electron microscopic images showed that the products are agglomerated and porous in nature. The transmission electron microscopic images revealed spherical particles of 40–50 nm in diameter. The photocatalytic degradation of methylene blue was examined using zinc oxide nanoparticles and found more efficient in sunlight than ultra-violet light due to reduced band gap. The antibacterial properties of zinc oxide nanoparticles were investigated against four bacterial strains Klebsiella aerogenes, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aereus, where Pseudomonas aeruginosa and Staphylococcus aereus exhibited significant antibacterial activity in agar well diffusion method when compared to positive control. - Highlights: • ZnO nanoparticles have been prepared from a new bio-fuel, tapioca starch by gel combustion method. • XRD pattern revealed hexagonal zincite crystal structure with crystallite size 33 nm. • ZnO nanoparticles exhibited a band gap of 2.70 eV. • The ZnO nanoparticles exhibited superior degradation in sunlight in comparison with UV light. • The product showed a good anti-bacterial activity against two bacterial strains.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

New Pt(II)(dithiolate) Compounds Possessing an Energetically Accessible Diphosphine-Based LUMO: Syntheses, Redox Properties, and Solid-State Structures of PtCl2(pbpcd), Pt(tdt)(pbpcd), and Pt(tdt)(bpcd)

The new ligand 2-(pyren-1-ylidene)-4,5-bis- (diphenylphosphino)-4-cyclopenten-1,3-dione (pbpcd) has been synthesized from the Knoevenagel condensation using 1-pyrenecarboxaldehyde with 4,5-bis(diphenylphosphino)- 4-cyclopenten-1,3-dione (bpcd). Displacement of the cod ligand in PtCl2(cod) by pbpcd furnishes PtCl2 (pbpcd) (2) in near quantitative yield. Treatment of 2 with the dipotassium salt of toluene-3,4-dithiol (K2tdt) affords the dithiolate compound Pt(tdt)(pbpcd) (3) as a 1:1 mixture of diastereomers. An alternative synthesis of 3 from Pt(tdt)(bpcd) (5) and 1-pyrenecarboxaldehyde also affords 3 in 23% yield. The pbpcd ligand and all new diphosphinesubstituted compounds have been isolated and fully characterized in solution by IR and NMR spectroscopies, and the solid-state structures of 2_CH2Cl2, 3_toluene, and 5_CH2Cl2 established by X-ray diffraction analyses. The solid-state structure of each product exhibits a square-planar architecture at the metal center. The redox properties of the pbpcd ligand and the tdt-substituted compound 3 have been explored by cyclic and differential-pulse voltammetry, and these data are discussed with respect to extended Huckel MO calculations and the nature of the HOMO and LUMO levels in each compound.

36 MATERIALS SCIENCE↗

The chemical instability of Na{sub 2}IrO{sub 3} in air

Highlights: • Na{sub 2}IrO{sub 3} decomposes rapidly in laboratory air. • The decomposition requires the simultaneous presence of CO{sub 2} and H{sub 2}O. • Decomposition results in a dramatic change in the magnetic properties. • Second 5 K feature in magnetic susceptibility not previously reported. - Abstract: We report that Na{sub 2}IrO{sub 3}, which has a layered honeycomb iridium oxide sublattice interleaved by Na planes, decomposes in laboratory air while maintaining the same basic crystal structure. The decomposition reaction was monitored by time-dependent powder X-ray diffraction under different ambient atmospheres, through which it was determined that it occurs only in the simultaneous presence of both CO{sub 2} and H{sub 2}O. A hydrated sodium carbonate is the primary decomposition product along with altered Na{sub 2}IrO{sub 3}. The diffraction signature of the altered Na{sub 2}IrO{sub 3} is quite similar to that of the pristine material, which makes the detection of decomposition difficult in a sample handled under ordinary laboratory conditions. The decomposed samples show a significantly decreased magnetic susceptibility and the disappearance of the low temperature antiferromagnetic transition considered to be characteristic of the phase. Samples that have never been exposed to air after synthesis display a previously unreported magnetic transition at 5 K.

36 MATERIALS SCIENCE↗

Effect of reductant and PVP on morphology and magnetic property of ultrafine Ni powders prepared via hydrothermal route

Graphical abstract: The ultrafine Ni powders with the shapes including sphere, pearl-string, leaf, fish-bone, hexagonal sheet and silknet were prepared through one-step hydrothermal reduction using different reductants. Their saturation magnetization, remanent magnetization and coercivity sequentially increase, and the coercivity of hexagonal sheet-like Ni powders increases by 25% compared with the Ni bulk counterpart. - Highlights: • The ultrafine Ni powders with various shapes of sphere, fish-bone, hexagonal sheet, etc. • Facile and one-step hydrothermal reduction using three reductants and PVP additive was developed. • Magnetic properties of the ultrafine Ni powders with different shapes were measured. • Compared with bulk Ni material, coercivity of hexagonal sheet Ni increases by 25%. • The formation mechanism of the shapes was suggested. - Abstract: The ultrafine nickel particles with different shapes including sphere, pearl-string, leaf, fish-bone, hexagonal sheet and silknet were prepared through one-step hydrothermal reduction using hydrazine hydrate, sodium hypophosphite and ethylene glycol as reductants, polyvinylpyrrolidone as structure-directing agent. It has been verified with the characterization of X-ray powder diffraction and transmission/scanning electronic microscopy that as-prepared products belong to face-centered cubic structure of nickel microcrystals with high purity and fine dispersity. The magnetic hysteresis loops measured at room temperature reveal that the values of saturation magnetization, remanent magnetization and coercivity rise sequentially from silknet, sphere to hexagonal sheet. In comparison with nickel bulk counterpart, the coercivity of the hexagonal sheet nickel powders increases by 25%.

36 MATERIALS SCIENCE↗

Synthesis and characterization of a series of Group 4 phenoxy-thiol derivatives

In this study, a series of Group 4 phenoxy-thiols were developed from the reaction products of a series of metal tert -butoxides ([M(OBu t ) 4 ]) with four equivalents of 4-mercaptophenol (H-4MP). The products were found by single crystal X-ray diffraction to adopt the general structure [(HOBu t )(4MP) 3 M(μ-4MP)] 2 [where M = Ti (1), Zr (2), Hf (3)] from toluene and [(py) 2 M(4MP)] where M = Ti (4), Zr (5) and [(py)(4MP) 3 Hf(μ-4MP)] 2 (6) from pyridine (py). Varying the [Ti(OR) 4 ] precursors (OR = iso -propoxide (OPr i ) or neo-pentoxide (ONep)) in toluene led to [(HOR)(4MP) 3 Ti(μ-4MP)] 2 (OR = OPr i (7), ONep (8)), which were structurally similar to 1. Lower stoichiometric reactions in toluene led to partial substitution by the 4MP ligands yielding [H][Ti(μ-4MP)(4MP)(ONep) 3 ] 2 (9). Independent of the stoichiometry, all of the Ti derivatives were found to be red in color, whereas the heavier congeners were colorless. Attempts to understand this phenomenon led to investigation with a series of varied –SH substituted phenols. From the reaction of H-2MP and H-3MP (2-mercaptophenol and 3-mercaptophenol, respectively), the isolated products had identical arrangements: [(ONep) 2 (2MP)Ti(μ,η2-2MP)] 2 (10) and [(HOR)(3MP)M(μ-3MP)] 2 (M/OR = Ti/ONep (11); Zr/OBu t (12)) with a similar red color. Based on the simulated and observed UV–Vis spectra, it was reasoned that the color was generated due to a ligand-to-metal charge transfer for Ti that was not available for the larger congeners.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile synthesis, spectral properties and formation mechanism of sulfur nanorods in PEG-200

Graphical abstract: Homogeneous rod-like structure of sulfur with a typical diameter of about 80 nm and an average aspect ratio of about 6–8 was obtained. The sulfur nanoparticles could self-assemble from spherical particles to nanorods in PEG-200. During the self-assembling process, the absorption band showed a red shift which was due to the production of nanorods. Highlights: ► A novel, facile and greener method to synthesize sulfur nanorods by the solubilizing and templating effect of PEG-200 was reported. ► S{sup 0} nanoparticles could self assemble in PEG-200 and finally form monodisperse and homogeneous rod-like structure with an average diameter of about 80 nm, the length ca. 600 nm. ► The absorption band showed a red shift and the RRS intensity enhanced continuously during the self-assembling process. ► PEG-200 induced the oriented attachment of sulfur nanoparticles by the terminal hydroxyl groups. -- Abstract: The synthesis of nano-sulfur sol by dissolving sublimed sulfur in a green solvent-PEG-200 was studied. Homogeneous rod-like structure of sulfur with a typical diameter of about 80 nm and an average aspect ratio of 6–8 was obtained. The structure, morphology, size, and stability of the products were investigated by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering (DLS) measurements. The spectral properties of the products were investigated by ultraviolet-visible (UV–vis) absorption and resonance Rayleigh scattering spectroscopy (RRS). The results showed that the spherical sulfur nanoparticles could self-assemble into nanorods in PEG-200. During the self-assembling process, the absorption band showed a red shift and the RRS intensity enhanced continuously. There was physical cross-linking between PEG and sulfur nanoparticles. PEG-200 induced the oriented attachment of sulfur nanoparticles by the terminal hydroxyl groups. This research provides a greener and more environment-friendly synthetic method for the production of sulfur nanorods.

36 MATERIALS SCIENCE↗

Advanced electron microscopic techniques applied to the characterization of irradiation effects and fission product identification of irradiated TRISO coated particles from the AGR-1 experiment

Preliminary electron microscopy of coated fuel particles from the AGR-1 experiment was conducted using characterization techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), and wavelength dispersive spectroscopy (WDS). Microscopic quantification of fission-product precipitates was performed. Although numerous micro- and nano-sized precipitates observed in the coating layers during initial SEM characterization of the cross-sections, and in subsequent TEM diffraction patterns, were indexed as UPd{sub 2}Si{sub 2}, no Ag was conclusively found. Additionally, characterization of these precipitates highlighted the difficulty of measuring low concentrations of Ag in precipitates in the presence of significantly higher concentrations of Pd and U. The electron microscopy team followed a multi-directional and phased approach in the identification of fission products in irradiated TRISO fuel. The advanced electron microscopy techniques discussed in this paper, not only demonstrate the usefulness of the equipment (methods) as relevant research tools, but also provide relevant scientific results which increase the knowledge about TRISO fuel particles microstructure and fission products transport.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigations into the Polymorphs and Hydration Products of UO3

This work focuses on progress in gaining a better understanding of the polymorphic nature of the UO{sub 3} and UO{sub 3}-water system; one of several important materials associated with the nuclear fuel cycle. The UO{sub 3}-water system is complex and has not been fully characterized, even though these species are common throughout the fuel cycle. For example, most production schemes for UO{sub 3} result in a mixture of up to six different polymorphic phases, and small differences in these conditions will affect phase genesis that ultimately results in measureable changes to the end product. Here we summarize our efforts to better characterize the UO{sub 3}-water system with optical techniques for the purpose of developing some predictive capability of estimating process history and utility, e.g. for polymorphic phases of unknown origin. Specifically, we have investigated three industrially relevant production pathways of UO{sub 3} and discovered a previously unknown low temperature route to {beta}-UO{sub 3}. Powder x-ray diffraction and optical spectroscopies were utilized in our characterization of the UO{sub 3}-water system. Pure phases of UO{sub 3}, its hydrolysis products and starting materials were used to establish optical spectroscopic signatures for these compounds. Preliminary aging studies were conducted on the {alpha}- and {gamma}-phases of UO{sub 3}.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Revealing the atomic and electronic mechanism of human manganese superoxide dismutase product inhibition

Human manganese superoxide dismutase (MnSOD) is a crucial oxidoreductase that maintains the vitality of mitochondria by converting superoxide (O 2 •– ) to molecular oxygen (O 2 ) and hydrogen peroxide (H 2 O 2 ) with proton-coupled electron transfers (PCETs). Human MnSOD has evolved to be highly product inhibited to limit the formation of H 2 O 2 , a freely diffusible oxidant and signaling molecule. The product-inhibited complex is thought to be composed of a peroxide (O 2 2– ) or hydroperoxide (HO 2 – ) species bound to Mn ion and formed from an unknown PCET mechanism. PCET mechanisms of proteins are typically not known due to difficulties in detecting the protonation states of specific residues that coincide with the electronic state of the redox center. To shed light on the mechanism, we combine neutron diffraction and X-ray absorption spectroscopy of the product-bound, trivalent, and divalent states of the enzyme to reveal the positions of all the atoms, including hydrogen, and the electronic configuration of the metal ion. The data identifies the product-inhibited complex, and a PCET mechanism of inhibition is constructed.

59 BASIC BIOLOGICAL SCIENCES↗

Special fractal growth of dendrite copper using a hydrothermal method

Special fractal dendrite Cu nanostructures have been synthesized through a simple hydrothermal method, and the effects of the volume ratio between glycerol and water and the concentration of H{sub 3}PO{sub 3} on the morphologies of dendrite Cu have been studied in detail. The Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM) and X-ray diffraction (XRD) have been used to characterize these Cu products. The results indicate that rhombic diamond and different morphologies of fractal dendrite were prepared because of the accumulation of Cu nuclei based on the diffusion-limited aggregation (DLA) and the nucleation-limited aggregation (NLA) model. Fortunately, symmetrical leaf-like dendrite Cu nanostructures different from Cu dendrites reported before have been obtained. Additionally, an explanation for the growth of fractal dendrite Cu has been discussed carefully. - Graphical abstract: Uniform dendritic Cu are grown through controlling V{sub glycerol/water} in range of 0.6-1.2 and the concentration of H{sub 3}PO{sub 3} in range of 0.06-0.3 M. The rhombic cluster Cu are obtained by decreasing the amount of glycerol. Highlights: > Volume ratio of glycerol/water and concentration of H{sub 3}PO{sub 3} were varied, respectively. > Morphologies of dendritic Cu have some changes. > Leaf-like and rhombic cluster Cu were obtained. > The concentration changes affect the aggregation of Cu crystallites. > The aggregation and crystallographic orientation cause leaf-like Cu nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis Properties and Electron Spin Resonance Properties of Titanic Materials

Titanic materials were synthesized by hydrothermal method of TiO{sub 2} anatase in 10M LiOH, 10M NaOH, and 14M KOH at 130 deg. C for 30 hours. Alkaline media were removed from the synthesized products using 0.1N HCl aqueous solution. The as-prepared samples were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, Brunauer-Emmett-Teller isotherm, and electron spin resonance. Different shapes of synthesized products were observed through the typical electron microscope and indicated that the formation of the different morphologies depends on the treatment conditions of highly alkaline media. Many micropores were observed in the cubic or octahedral type of TiO{sub 2} samples through the typical electron microscope and Langmuir adsorption-desorption isotherm of liquid nitrogen at 77 deg. K. Electron spin resonance studies have also been carried out to verify the existence of paramagnetic sites such as oxygen vacancies on the titania samples. The effect of alkali metal ions on the morphologies and physicochemical properties of nanoscale titania are discussed.

36 MATERIALS SCIENCE↗

Crystallization of a fungal lytic polysaccharide monooxygenase expressed from glycoengineered Pichia pastoris for X-ray and neutron diffraction

Lytic polysaccharide monooxygenases (LPMOs) are carbohydrate-disrupting enzymes secreted by bacteria and fungi that break glycosidic bonds via an oxidative mechanism. Fungal LPMOs typically act on cellulose and can enhance the efficiency of cellulose-hydrolyzing enzymes that release soluble sugars for bioethanol production or other industrial uses. The enzyme PMO-2 from Neurospora crassa ( Nc PMO-2) was heterologously expressed in Pichia pastoris to facilitate crystallographic studies of the fungal LPMO mechanism. Diffraction resolution and crystal morphology were improved by expressing Nc PMO-2 from a glycoengineered strain of P. pastoris and by the use of crystal seeding methods, respectively. These improvements resulted in high-resolution (1.20 Å) X-ray diffraction data collection at 100 K and the production of a large Nc PMO-2 crystal suitable for room-temperature neutron diffraction data collection to 2.12 Å resolution.

59 BASIC BIOLOGICAL SCIENCES↗

Intercalation of organic molecules into SnS{sub 2} single crystals

SnS{sub 2} is a layered semiconductor with a van der Waals gap separating the covalently bonded layers. In this study, post-synthesis intercalation of donor organic amine molecules, such as ethylenediamine (en), into tin disulfide and secondary intercalation of p-phenylenediamine (PPD) and 1, 5-naphthalenediamine (NDA) into SnS{sub 2e}n have been verified with X-ray diffraction. PPD and NDA did not intercalate directly even during prolonged annealing but replaced en readily if en was already present in the van der Waals gap. The c-lattice dilation is proportional to the intercalant size. Unit cell lattices of intercalated products were determined from the positions of the X-ray diffraction peaks. Optical images taken during the intercalation showed that intercalation progressed from the periphery towards the interior of the crystal. TEM diffraction patterns in the [0 0 1] direction of SnS{sub 2} after intercalation revealed defects and stacking mismatches among the SnS{sub 2} layers caused by the intercalation. UV-Vis absorption studies showed a red shift in the band edge of the SnS{sub 2} material after intercalation. The band edge was 2.2 eV for pristine SnS{sub 2}; after intercalation with en or PPD, the absorbance spectra band edges shifted to approximately 0.7 eV or 0.5 eV, respectively. - Graphical Abstract: SnS{sub 2} single crystals were intercalated with organic amine molecules such as ethylenediamine, phenylenediamine and naphthalenediamine. Absorption studies showed red shift of band edge after intercalation, which was consistent with optical observations. X-ray diffraction indicated lattice dilation in the c-lattice of SnS{sub 2} after intercalation. Highlights: Black-Right-Pointing-Pointer Organic molecules intercalated inhomogenously between covalently bonded SnS{sub 2} layers. Black-Right-Pointing-Pointer Ethylenediamine (en) intercalate directly into SnS{sub 2}. Black-Right-Pointing-Pointer Phenylenediamine (PPD) and naphthalenediamine (NDA) can be intercalated into SnS{sub 2} secondary. Black-Right-Pointing-Pointer In a secondary intercalation the bonds between layers are weakened by direct intercalation of (en). Black-Right-Pointing-Pointer The optical band gap of SnS{sub 2} is reduced due to intercalation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗