Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Defects in Highly Anisotropic Transition-Metal Dichalcogenide PdSe 2

The atomic and electronic structures of the pristine PdSe 2 as well as various intrinsic vacancy defects in PdSe 2 are studied comprehensively by combining scanning tunneling microscopy, spectroscopy and density functional theory calculations. Other than the topmost Se atoms, sublayer Pd atoms, the intrinsic Pd and Se vacancy-defects are identified. Both V Se and V Pd defects induce defect states near Fermi level. As a result, the vacancy defects can be negatively charged by tip gating effect. At negative sample bias, the screened Coulomb interaction between STM tip and the charged vacancies creates disk-like protrusion around V Pd and crater-like features around V Se . The magnification effect of the long-range charge localization at the charged defect site makes sublayer defects as deep as 1nm visible even in STM images. In conclusion, this result proves that by gating the probe, scanning probe microscopy can be used as an easy tool for characterizing sublayer defects in a nondestructive way.

36 MATERIALS SCIENCE↗

New insights on P-related paramagnetic point defects in irradiated phosphate glasses: Impact of glass network type and irradiation dose

P-related paramagnetic point defects were studied in irradiated Yb-doped phosphate glasses by electron paramagnetic resonance spectroscopy (X and Q-bands). A strong impact of the glass network type on the defect nature is shown. In all glasses, r-POHC defects formation is in strong correlation with Q{sup 2} tetrahedra amount supporting the structure of r-POHC. Ultra-phosphate glasses contain the larger defect type: Peroxy radicals, P{sub 1}, P{sub 2}, and P{sub 4} defects whose formation is linked to Q{sup 3} tetrahedra presence. In meta-phosphate and poly-phosphate glasses, peroxy radicals appear with r-POHC thermal recovery. In meta-phosphate glasses, a combination of P{sub 1} and P{sub 3} defects was evidenced for the first time, whereas in poly-phosphate glasses, only P{sub 3} defects were identified. Dose effect as well as defect recovery were analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First principles calculations for defects in U

Uranium (U) exhibits a high temperature body-centered cubic (bcc) allotrope that is often stabilized by alloying with transition metals such as Zr, Mo, and Nb for technological applications. One such application involves U–Zr as nuclear fuel, where radiation damage and diffusion (processes heavily dependent on point defects) are of vital importance. Several systems of U are examined within a density functional theory framework utilizing projector augmented wave pseudopotentials. Two separate generalized gradient approximations of the exchange-correlation are used to calculate defect properties and are compared. The bulk modulus, the lattice constant, and the Birch–Murnaghan equation of state for the defect free bcc uranium allotrope are calculated. Defect parameters calculated include energies of formation of vacancies in the a and ? allotropes, as well as self-interstitials, Zr interstitials, and Zr substitutional defects for the ? allotrope. The results for vacancies agree very well with experimental and previous computational studies. The most probable self-interstitial site in ?-U is the 110 dumbbell, and the most probable defect location for dilute Zr in ?-U is the substitutional site. This is the first detailed study of self-defects in the bcc allotrope of U and also the first comprehensive study of dilute Zr defects in ?-U.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Critical Review of LPBF Metal Print Defects Detection: Roles of Selective Sensing Technology

The integrative potential of LPBF-printed parts for various innovative applications depends upon the robustness and infallibility of the part quality. Eliminating or sufficiently reducing factors contributing to the formation of defects is an integral step to achieving satisfiable part quality. Significant research efforts have been conducted to understand and quantify the triggers and origins of LPBF defects by investigating the material properties and process parameters for LPBF-printed geometries using various sensing technologies and techniques. Frequently, combinations of sensing techniques are applied to deepen the understanding of the investigated phenomena. The main objectives of this review are to cover the roles of selective sensing technologies by (1) providing a summary of LPBF metal print defects and their corresponding causes, (2) informing readers of the vast number and types of technologies and methodologies available to detect defects in LPBF-printed parts, and (3) equipping readers with publications geared towards defect detection using combinations of sensing technologies. Due to the large pool of developed sensing technology in the last few years for LPBF-printed parts that may be designed for targeting a specific defect in metal alloys, the article herein focuses on sensing technology that is common and applicable to most common defects and has been utilized in characterization for an extended period with proven efficiency and applicability to LPBF metal parts defect detection.

36 MATERIALS SCIENCE↗

The role of atomic structure on grain boundary-defect interactions in Cu

We investigate the role that the atomic structure of grain boundaries in Cu has in the interaction with point defects produced during irradiation. We focus on three aspects of defect-boundary interaction: how defects interact with pristine boundaries, how boundaries modify defect production during collision cascades, and how defects interact with damaged boundaries. We find that there are generic features common to most boundaries, including biased absorption of interstitials over vacancies during collision cascades and strong interactions with vacancies for interstitial-loaded boundaries. However, we find that the magnitude of these behaviors depends strongly on the atomic structure of the boundary. In particular, the biased absorption is much stronger for a high angle twist boundary and smallest for a more general twist-asymmetric tilt boundary. Further, the strength of defect-boundary interactions is also sensitive to the boundary structure. We conclude that the sink strength of grain boundaries for interacting with point defects is not an intrinsic property of the boundary but rather depends on the irradiation condition through the absorbed defect content at the boundary.

36 MATERIALS SCIENCE↗

Selective Antisite Defect Formation in WS 2 Monolayers via Reactive Growth on Dilute W-Au Alloy Substrates

Defects are ubiquitous in 2D materials and can affect the structure and properties of the materials and also introduce new functionalities. Methods to adjust the structure and density of defects during bottom-up synthesis are required to control the growth of 2D materials with tailored optical and electronic properties. In this study, the authors present an Au-assisted chemical vapor deposition approach to selectively form S W and S2 W antisite defects, whereby one or two sulfur atoms substitute for a tungsten atom in WS 2 monolayers. Guided by first-principles calculations, they describe a new method that can maintain tungsten-poor growth conditions relative to sulfur via the low solubility of W atoms in a gold/W alloy, thereby significantly reducing the formation energy of the antisite defects during the growth of WS 2 . The atomic structure and composition of the antisite defects are unambiguously identified by Z-contrast scanning transmission electron microscopy and electron energy-loss spectroscopy, and their total concentration is statistically determined, with levels up to ≈5.0%. Furthermore, scanning tunneling microscopy/spectroscopy measurements and first-principles calculations also verified these antisite defects and revealed the localized defect states in the bandgap of WS 2 monolayers. This bottom-up synthesis method to form antisite defects should apply in the synthesis of other 2D materials.

2D materials↗

Identification of Defects and the Origins of Surface Noise on Hydrogen–Terminated (100) Diamond

Near-surface nitrogen vacancy centres are critical to many diamond-based quantum technologies such as information processors and nanosensors. Surface defects play an important role in the design and performance of these devices. The targeted creation of defects is central to proposed bottom-up approaches to nanofabrication of quantum diamond processors, and uncontrolled surface defects may generate noise and charge trapping which degrade shallow NV device performance. Surface preparation protocols may be able to control the production of desired defects and eliminate unwanted defects, but only if their atomic structure can first be conclusively identified. This work uses a combination of scanning tunnelling microscopy (STM) imaging and first-principles simulations to identify several surface defects on H:C(100)—2 × 1 surfaces prepared using chemical vapour deposition (CVD). The atomic structure of these defects is elucidated, from which the microscopic origins of magnetic noise and charge trapping are determined based on the modeling of their paramagnetic properties and acceptor states. Rudimentary control of these deleterious properties is demonstrated through STM tip-induced manipulation of the defect structure. Furthermore, the results validate accepted models for CVD diamond growth by identifying key adsorbates responsible for the nucleation of new layers.

36 MATERIALS SCIENCE↗

Impact of Individual Structural Defects in GaAs Solar Cells: A Correlative and In Operando Investigation of Signatures, Structures, and Effects

Defects usually degrade device performance. Thus, many techniques and effort are devoted to studying semiconductor defects. However, it is rarely known: i) how individual defects affect device performance; ii) how the impact depends on the device operating conditions; iii) how the impact varies from one defect to another; and iv) how these variations are correlated to the microscopic-scale defect structure. To address these crucial questions, an array of correlative and spatially resolved techniques, including electroluminescence, photoluminescence, Raman, I–V characteristics, and high-resolution electron microscopy, are used to characterize dislocation defects in GaAs solar cells. Significantly, the study is carried out in a series mode and in operando. This approach provides quantitative and definitive correlation between the atomistic structure of defects and their explicit effects on device performance, thus giving unprecedented insight into defect physics.

dislocation defects↗

Defects, Entropy, and the Stabilization of Alternative Phase Boundary Orientations in Battery Electrode Particles

Using a novel statistical approach that efficiently explores the space of possible defect configurations, our present study investigates the chemomechanical coupling between interfacial structural defects and phase boundary alignments within phase-separating electrode particles. Applied to the battery cathode material Li X FePO 4 as an example, the theoretical analysis reveals that small, defect-induced deviations from an ideal interface can lead to dramatic shifts in the orientations of phase boundaries between Li-rich and Li-lean phases, stabilizing otherwise unfavorable orientations. Significantly, this stabilization arises predominantly from configurational entropic factors associated with the presence of the interfacial defects rather than from absolute energetic considerations. The specific entropic factors pertain to the diversity of defect configurations and their contributions to rotational/orientational rigidity of phase boundaries. Comparison of the predictions with experimental observations indicates that the additional entropy contributions indeed play a dominant role under actual cycling conditions, leading to the conclusion that interfacial defects must be considered when analyzing the stability and evolution kinetics of the internal phase microstructure of strongly phase-separating systems. Possible implications for tuning the kinetics of (de)lithiation based on selective defect incorporation are discussed. Ultimately, this understanding can be generalized to the chemomechanics of other defective solid phase boundaries.

25 ENERGY STORAGE↗

Simulation of Laser Ultrasonics for Detection of Surface-Connected Rail Defects

Laser ultrasonic produces frequencies in the MHz range, enabling high accuracy and a strong ability to detect rail surface defects. This paper mainly studied on the simulation of detecting surface-connected rail defects on 60 kg rails with laser ultrasonic, established the finite element model of laser-excited ultrasonic Rayleigh wave, carried out the simulation, and verified the effectiveness of the technology through experiments. To solve the problem that laser ultrasonic is insensitive to the width of defects in actual detection, and unable to make quantitative detection of defects, this paper established a new model on the basis of improving the original model that has been verified, exciting ultrasonic at the two sides at the same time of a rail with two staggered beams of laser separately to detect irregular scratch defects on rail surface, and two groups of signal data were received through two probes. Each group of data can present the half-profile information of defects, and further form two detection images of the defect. At last, the two detection images were combined into a complete image through image processing. The results of the experiment indicate that the technology studied offers a new method for the effective quantitative detection of surface-connected defects on rail.

42 ENGINEERING↗

Atomic-scale identification of defects in alite

Crystallographic defects play a crucial role in cement hydration, with initial dissolution being dominated by the formation of etch pits that rely on the intersection of defects on surfaces. However, the defects present in cement particles have remained a mystery due to the lack of detailed direct observation at the atomic scale. In this study, we used scanning transmission electron microscopy to unravel the defects in alite particles at the single-atom level. Our observations identified different types of defects, including vacancies, doping, dislocations, rough surfaces, and grain boundaries. Atomic ordering in the alite crystal was further examined based on our single-atom recognition method. Our findings indicate that defects in cement particles may serve as reactive sites during the early hydration stage, facilitating the initial dissolution and providing nucleation sites for hydration products. Finally, this work provides insights into cement defect formation at the single-atom level and offers new opportunities in tuning the hydration process through defect engineering of cement particles.

36 MATERIALS SCIENCE↗

Characterization of high-quality kerfless epitaxial silicon for solar cells: Defect sources and impact on minority-carrier lifetime

We investigate the types and origins of structural defects in thin (<100 μm) kerfless epitaxial single crystal silicon grown on top of reorganized porous silicon layers. Although the structural defect density is low (has average defect density < 10 4 cm -2 ), localized areas with a defect density > 10 5 cm -2 are observed. Cross-sectional and systematic plan-view defect etching and microscopy reveals that the majority of stacking faults and dislocations originate at the interface between the porous silicon layer and the epitaxial wafer. Localised dislocation clusters are observed in regions of collapsed/deformed porous silicon and at decorated stacking faults. In localized regions of high extended defect density, increased minority-carrier recombination activity is observed. Evidence for impurity segregation to the extended defects (internal gettering), which is known to exacerbate carrier recombination is demonstrated. In conclusion, the impact of the defects on material performance and substrate re-use is also discussed.

14 SOLAR ENERGY↗

Role of V-defect density on the performance of III-nitride green LEDs on sapphire substrates

In this paper, we experimentally investigated the role of V-defect density on the performance of green III-nitride LEDs grown on sapphire substrates by metalorganic chemical vapor deposition. We systematically varied the threading dislocation (TD) density from 4 × 10 8 to 1 × 10 9 cm -2 by changing the V/III ratio during initial high temperature GaN growth. A 30-period InGaN/GaN superlattice promoted V-defect formation and growth at TDs, where the density of V-defects was correlated to the TD density. By interrupting the LED growth and examining the surface of the active region, we quantified the average size and density of V-defects. In a series of LEDs, we measured a systematic decrease in forward voltage (V F ) with V-defect density. At a V-defect density of 5.0 × 10 8 cm -2 and TD density of 1 × 10 9 cm -2 , green LED devices were demonstrated with λ = 523 nm and V F = 2.94 V at 20 A cm -2 . These results highlight the potential of using V-defect engineering to achieve low V F long wavelength LEDs on sapphire substrates, where opening of remaining threading dislocations into V-defects presents an opportunity for further V F reduction.

36 MATERIALS SCIENCE↗

Incorporating point defect generation due to jog formation into the vector density-based continuum dislocation dynamics approach

During plastic deformation of crystalline materials, point defects such as vacancies and interstitials are generated by jogs on moving dislocations. A detailed model for jog formation and transport during plastic deformation was developed within the vector density-based continuum dislocation dynamics framework. Here as a part of this model, point defect generation associated with jog transport was formulated in terms of the volume change due to the non-conservative motion of jogs. Balance equations for the vacancies and interstitials including their rate of generation due to jog transport were also formulated. A two-way coupling between point defects and dislocation dynamics was then completed by including the stress contributed by the eigen-strain of point defects. A jog drag stress was further introduced into the mobility law of dislocations to account for the energy dissipation during point defects generation. A number of test problems and a fully coupled simulation of dislocation dynamics and point defects generation and diffusion were performed. The results show that there is an asymmetry of vacancy and interstitial generation due to the different formation energies of the two types of defects. The results also show that a higher hardening rate and a higher dislocation density are obtained when the point defect generation mechanism is coupled to dislocation dynamics.

36 MATERIALS SCIENCE↗

Point defects diagrams for pure and doped copper oxide Cu{sub 2{+-}{delta}}O in the temperature range of 873-1473 K

Point defects diagrams for the Cu{sub 2{+-}{delta}}O, both pure and doped with M{sup 2+} metal ions with all the types of defects in the cation sublattice considered are presented in this work. The calculations of the diagrams were performed by a novel method. The calculations were based on the data from the results of the studies of the deviation from stoichiometry and the electrical conductivity in the temperature range of 873-1473 K. The values of {Delta}G{sup o} of the formation of Frenkel-type defects, of copper vacancies, and of interstitial copper atoms were determined and their temperature dependence. It was shown that character of the dependence of the sum of concentrations of electronic defects ([h{sup Bullet }]+b[e Prime ]) on p{sub O{sub 2}} is fully consistent with its dependence of the electrical conductivity. Their mobility ({mu}{sub e}/{mu}{sub h}=b), vary from 1300 to 30. The dope M{sup 2+} increases the concentration of electrons and shifts the minimum of electrical conductivity toward higher oxygen pressures. - Graphical abstract: This work presents point defects diagrams for the Cu{sub 2{+-}{delta}}O, with all the types of defects in the cation sublattice considered. Highlights: Black-Right-Pointing-Pointer The point defects diagrams. Copper oxide Cu{sub 2{+-}{delta}}O, for pure and M{sup 2+} doped. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation of Frenkel-type defects were determined. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation QUOTE QUOTE of singly-ionized copper vacancies were determined. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation of electroneutral copper vacancies were determined. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation and of interstitial copper atoms were determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The native point defects of ternary C14 Laves phase Mg{sub 2}Cu{sub 3}Si: Ab initio investigation

Nine possible native point defects in ternary C14 Laves phase Mg{sub 2}Cu{sub 3}Si are investigated from ab initio calculation based on density function theory. The two-dimensional phase diagram of chemical potentials is determined, and then defect formation energy is calculated. The energetic results show that Cu{sub Si} and Cu{sub Mg} are more favorable over a broad range of chemical potentials. The formation enthalpies for defective Mg{sub 2}Cu{sub 3}Si also demonstrate the same stability. Local distortions around point defects increase from Si{sub Cu} to Si{sub Mg}, showing that the polyhedral symmetry and coordination number for constituent atoms will affect the structure of defects. The electronic structure shows the strong (Cu, Si)–Si covalent bonding, also indicates that the Cu{sub Mg} is favorable because the weak Mg-Cu bonding is replaced by the strong Cu–Cu bonding, whereas Mg{sub Cu} and Mg{sub Si} are unfavorable because the strong Cu–Si bonding is replaced by the weak Mg–(Cu, Si) bonding. - Graphical abstract: Defects formation energy of τ phase as a function of the chemical potential over the stable scopes A-B-C-O-D-A. Display Omitted - Highlights: • The two-dimensional phase diagram of chemical potentials is determined. • The defect Cu{sub Si} and Cu{sub Mg} is more favorable than other defects in Mg{sub 2}Cu{sub 3}Si. • Local distortions from Cu{sub Si} to Mg{sub Si} are similar to the trend of energetic results. • The Mg{sub Cu} and Mg{sub Si} are unfavorable because Cu (Si)–Mg bonding is weaker than Cu-Si. • Mg{sub 2}Cu{sub 3}Si phase has the strong Cu-Si and Si-Si covalent character.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D modeling of missing pellet surface defects in BWR fuel

One of the important roles of cladding in light water reactor fuel rods is to prevent the release of fission products. To that end, it is essential that the cladding maintain its integrity under a variety of thermal and mechanical loading conditions. Local geometric irregularities in fuel pellets caused by manufacturing defects known as missing pellet surfaces (MPS) can in some circumstances lead to elevated cladding stresses that are sufficiently high to cause cladding failure. Accurate modeling of these defects can help prevent these types of failures. The BISON nuclear fuel performance code developed at Idaho National Laboratory can be used to simulate the global thermo-mechanical fuel rod behavior, as well as the local response of regions of interest, in either 2D or 3D. In either case, a full set of models to represent the thermal and mechanical properties of the fuel, cladding and plenum gas is employed. A procedure for coupling 2D full-length fuel rod models to detailed 3D models of the region of the rod containing a MPS defect is detailed in this paper. The global and local model each contain appropriate physics and behavior models for nuclear fuel. This procedure is demonstrated on a simulation of a boiling water reactor (BWR) fuel rod containing a pellet with an MPS defect, subjected to a variety of transient events, including a control blade withdrawal and a ramp to high power. The importance of modeling the local defect using a 3D model is highlighted by comparing 3D and 2D representations of the defective pellet region. Finally, parametric studies demonstrate the effects of the choice of gaseous swelling model and of the depth and geometry of the MPS defect on the response of the cladding adjacent to the defect.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nanoscale friction of CVD single-layer MoS 2 with controlled defect formation

Two-dimensional (2D) layered nanomaterials such as graphene, molybdenum disulfide (MoS 2 ), or tungsten disulfide offer a promising solution in areas of solid-state lubrication, due to their excellent mechanical properties as well as low friction. However, defects can influence their friction and reduce their superior tribological properties. Thus, it is crucial to understand the effects of defects on sliding behavior in 2D nanomaterials, to foster a functional strategy for utilizing 2D nanomaterials as solid-state tribological films. In this study, frictional effects of defects, grain boundaries, and atomic-scale structural defects were explored on chemical vapor deposition (CVD) grown single layer MoS 2 . Selective patterning of defects into MoS 2 was accomplished via controlled irradiation of helium ions with varying ion doses. The friction of MoS 2 was characterized by friction force microscopy (FFM) and was found that friction depends on the defect formation controlled by helium ion irradiation. This approach offers a correlation between surface topography, defects and friction. Understanding the relative friction of MoS 2 in the presence of different levels of defects is foundational to studying tribological properties of a single layer MoS 2 at both nanoscales and macroscales.

36 MATERIALS SCIENCE↗