Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Extrapolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

A Numerical Simulation and Statistical Modeling of High Intensity Radiated Fields Experiment Data

Tests are conducted on a quad-redundant fault tolerant flight control computer to establish upset characteristics of an avionics system in an electromagnetic field. A numerical simulation and statistical model are described in this work to analyze the open loop experiment data collected in the reverberation chamber at NASA LaRC as a part of an effort to examine the effects of electromagnetic interference on fly-by-wire aircraft control systems. By comparing thousands of simulation and model outputs, the models that best describe the data are first identified and then a systematic statistical analysis is performed on the data. All of these efforts are combined which culminate in an extrapolation of values that are in turn used to support previous efforts used in evaluating the data.

Smith, Laura J.↗
NASA NTRS1991

Euler/experiment correlations of sonic boom pressure signatures

The ability of inviscid computational fluid dynamics (CFD) codes to compute sonic boom pressure signatures is examined using three different codes that solve the Euler equations of fluid flow on structured hexahedral and unstructured tetrahedral grids. The results of these Euler codes were evaluated by comparing the computed pressure signatures with near-field experimental data. The computational pressure signatures were determined at distances of one body length or less below the configuration in the plane of symmetry and extrapolated to experimental distances. The extrapolated CFD pressure signatures gave acceptable correlations with experimental data, provided that fine grids were used near the surface and downstream of the configuration.

Cliff, Susan E.↗
NASA NTRS1996

Chlorine Deactivation in the Lower Stratospheric Polar Regions during late Winter: Results from UARS

Recovery from enhanced chlorine conditions in the lower stratospheric polar regions of both hemispheres is investigated using data from the Upper Atmosphere Research Satellite (UARS). Microwave Limb Sounder (MLS) measurements of ClO within the polar vortices are used to infer ClO(sub x) (ClO + 2Cl202) abundances that are then correlated with simultaneous Cryogenic Limb Array Etalon Spectrometer (CLAES) measurements of ClON02 and Halogen Occultation Experiment (HALOE) measurements of HCl obtained starting within 5 days of the end of the MLS and CLAES high-latitude observing periods in each hemisphere. Time series of vortex-averaged mixing ratios are calculated on two potential temperature surfaces (585 K and 465 K) in the lower stratosphere for approximately month-long intervals during late winter: August 17 - September 17, 1992, in the southern hemisphere and February 12 - March 16, 1993, in the northern hemisphere. The observed mixing ratios are adjusted for the effects of vertical transport using diabatic vertical velocities estimated from CLAES tracer data. In the northern hemisphere, the decrease in ClO, is balanced on both surfaces by an increase in ClON02- In the southern hemisphere, continuing polar stratospheric cloud activity prevents ClO from undergoing sustained decline until about September 3. In contrast to the northern hemisphere, there is no significant chemical change in vortex-averaged ClON02 at 465 K, and there is an apparent decrease in ClON02 at 585 K, even after the enhanced ClO abundances have started to recede. Results from the SLIMCAT chemical transport model initialized with UARS data and run with OH + ClO yields HCl + 02 as an 8% channel suggest that the primary recovery product in the south during this time period is not ClON02, but HCl. HALOE HCl mixing ratios are extrapolated back to the time of the MLS and CLAES data. At 585 K, the chlorine budget can be made to balance by extrapolating HCl back to a value of 0.6 parts per billion by volume (ppbv) at the beginning of the study period; at 465 K, the contribution from extrapolated HCl is not sufficient to offset the loss in ClOx, and there is a slight imbalance between the decrease in reactive chlorine and the change in chlorine reservoirs. The difficulty in closing the chlorine budget in the southern hemisphere may arise from complications caused by ongoing activation, incomplete photochemical assumptions, and/or inadequate data quality.

Santee, M. L.↗
DOE OSTI2023

Disruption Mitigation Solutions for Long Pulse Tokamaks (Final Technical Report)

The project "Disruption Mitigation Solutions for Long Pulse Tokamaks" was a collaborative effort between ORNL, GA, and UCSD. The main goal of the project was to study the injection of shattered cryogenic pellets (SPI) as a method of reducing wall damage from global tokamak plasma instabilities called disruptions. This work was primarily carried out in the JET tokamak in the UK. The team already had extensive experience studying PSI in the medium sized DIII-D tokamak in the US, but adding data from the larger JET tokamak enabled more confident extrapolation to the even larger planned ITER tokamak in France. Each of the collaborating institutions focused on different aspects of SPI disruption mitigation. The UCSD collaboration focused on the volume recombination of post-disruption runaway electron (RE) beams by massive hydrogen injection. Disruptions can sometimes result in the formation of toroidal (ring shaped) beams of highly energetic (relativistic) electron beams, which can cause serious local wall damage, even in present-day tokamaks. A promising method to reduce wall damage from the RE beams is to inject massive amounts of H 2 or D 2 into the beams using SPI. although the precise method by which the injected H 2 reducses RE wall damage is still being investigated, it seems clear that a necessary and required step for the reduction to occur is for the H 2 injection to cause volume recombination (free electron density reduction) of the background cold plasma surrounding the fast electron beam. The UCSD collaboration focused on answering the question of if this recombination could be achievable in the future reactor-size tokamak ITER using realistic levels of H 2 injection. A model capturing the most essential physics was developed and was constrained using both DIII-D and JET data. This model was then used to extrapolate to ITER. It was predicted that RE beam recombination should be achievable in ITER, although in the worst-case scenari (a 10 MA Re beam in ITER), recombination is barely achieved within the maximum allowed levels of H 2 injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Surface soil temperature and water content from warming experiment located at the Rocky Mountain Biological Laboratory, Colorado, 2015 to 2019

This data package consists of soil temperature and soil water content sensor data from the warming experiment near the Rocky Mountain Biological Laboratory. Data range is from summer 2015 to summer 2019, when the warming manipulation was terminated. The location of the warming experiment is in the upper montane life zone and consists of meadow vegetation with a mixture of sagebrush (Artemisia tridentata), forb species (Erigeron speciosus, Helianthella quinquenervis, Lathyrus lanszwertii), and graminoid species (Festuca thurberi, Carex spps). Early studies showed that the heating treatment led to earlier snowmelt as well as warmer and drier surface soils, and changes in the functional composition of aboveground biomass favoring sagebrush over forb species (Harte and Shaw, 1995). These changes were mainly observed in the upper, naturally drier zone for the experimental plots. More recent observations of aboveground biomass, soil carbon, and microbial composition require concurrent information about the abiotic environment for interpretation and extrapolation to process-based models. This data package provides the plot- and zone-level abiotic context for the final years of the experiment and consists of csv files with hourly soil temperature (WM_ST.csv) and soil water content (WM_SWC.csv).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Dose Response, Dosimetric, and Metabolic Evaluations of Replacement PFAS Perfluoro-(2,5,8-trimethyl-3,6,9-trioxadodecanoic) Acid (HFPO-TeA)

Few studies are available on the environmental and toxicological effects of perfluoroalkyl ether carboxylic acids (PFECAs), such as GenX, which are replacing legacy PFAS in manufacturing processes. To collect initial data on the toxicity and toxicokinetics of a longer-chain PFECA, male and female Sprague Dawley rats were exposed to perfluoro-(2,5,8-trimethyl-3,6,9-trioxadodecanoic) acid (HFPO-TeA) by oral gavage for five days over multiple dose levels (0.3–335.2 mg/kg/day). Clinically, we observed mortality at doses >17 mg/kg/day and body weight changes at doses ≤ 17 mg/kg/day. For the 17 mg/kg/day dose level, T3 and T4 thyroid hormone concentrations were significantly decreased (p < 0.05) from controls and HFPO-TeA plasma concentrations were significantly different between sexes. Non-targeted analysis of plasma and in vitro hepatocyte assay extractions revealed the presence of another GenX oligomer, perfluoro-(2,5-dimethyl-3,6-dioxanonanoic) acid (HFPO-TA). In vitro to in vivo extrapolation (IVIVE) parameterized with in vitro toxicokinetic data predicted steady-state blood concentrations that were within seven-fold of those observed in the in vivo study, demonstrating reasonable predictivity. The evidence of thyroid hormone dysregulation, sex-based differences in clinical results and dosimetry, and IVIVE predictions presented here suggest that the replacement PFECA HFPO-TeA induces a complex and toxic exposure response in rodents.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

Ionospheric gravity wave measurements with the USU dynasonde

A method for the measurement of ionospheric Gravity Wave (GW) using the USU Dynasonde is outlined. This method consists of a series of individual procedures, which includes functions for data acquisition, adaptive scaling, polarization discrimination, interpolation and extrapolation, digital filtering, windowing, spectrum analysis, GW detection, and graphics display. Concepts of system theory are applied to treat the ionosphere as a system. An adaptive ionogram scaling method was developed for automatically extracting ionogram echo traces from noisy raw sounding data. The method uses the well known Least Mean Square (LMS) algorithm to form a stochastic optimal estimate of the echo trace which is then used to control a moving window. The window tracks the echo trace, simultaneously eliminating the noise and interference. Experimental results show that the proposed method functions as designed. Case studies which extract GW from ionosonde measurements were carried out using the techniques described. Geophysically significant events were detected and the resultant processed results are illustrated graphically. This method was also developed for real time implementation in mind.

Berkey, Frank T.↗
DOE OSTI2026

Large-momentum effective theory’s asymptotic extrapolation vs the inverse problem

Large-momentum effective theory is a physics-guided systematic expansion to calculate light-cone parton distributions, including collinear (PDFs) and transverse-momentum-dependent ones, at any fixed momentum fraction 𝑥 within a range of [𝑥 min , 𝑥 max ]. It theoretically solves the ill-posed inverse problem that afflicts other theoretical approaches to collinear PDFs, such as short-distance factorizations. Recently, Dutrieux et al. raised practical concerns about whether current or even future lattice data will have sufficient precision in the subasymptotic correlation region to support an error-controlled extrapolation—and if not, whether it becomes an inverse problem where the relevant uncertainties cannot be properly quantified. While we agree that not all current lattice data have the desired precision to qualify for an asymptotic extrapolation, some calculations do, and more are expected in the future. We comment on the analysis and results in Dutrieux et al. and argue that a physics-based systematic extrapolation still provides the most reliable error estimates, even when the data quality is not ideal. In contrast, reframing the long-distance asymptotic extrapolation as a data-driven-only inverse problem with ad hoc mathematical conditioning could lead to unnecessarily conservative errors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1993

Heat flux measurements on ceramics with thin film thermocouples

Two methods were devised to measure heat flux through a thick ceramic using thin film thermocouples. The thermocouples were deposited on the front and back face of a flat ceramic substrate. The heat flux was applied to the front surface of the ceramic using an arc lamp Heat Flux Calibration Facility. Silicon nitride and mullite ceramics were used; two thicknesses of each material was tested, with ceramic temperatures to 1500 C. Heat flux ranged from 0.05-2.5 MW/m2(sup 2). One method for heat flux determination used an approximation technique to calculate instantaneous values of heat flux vs time; the other method used an extrapolation technique to determine the steady state heat flux from a record of transient data. Neither method measures heat flux in real time but the techniques may easily be adapted for quasi-real time measurement. In cases where a significant portion of the transient heat flux data is available, the calculated transient heat flux is seen to approach the extrapolated steady state heat flux value as expected.

Holanda, Raymond↗
NASA NTRS1991

Dissociation of diatomic gases

The Landau-Zener theory of reactive cross sections has been applied to diatomic molecules dissociating from a ladder of rotational and vibrational states. Although the preexponential factor of the Arrhenius rate expression is shown to be a complex function of the dimensionless activation energy, the average over all states in the ladder is well represented by a single factor that varies about as T exp (-n), where the coefficient n is the order of unity. This relation agrees very well with experimental data for dissociation of O2 and N2, for example. The results validate previous empirical assignment of a single preexponential factor in the Arrhenius expression and justify the extrapolation of the expression well beyond the range of data. The theory is then used to calculate the effect of vibrational nonequilibrium on dissociation rate. For Morse oscillators the results are about the same as for harmonic oscillators, and the dissociation from a ladder of equilibrium rotational and nonequilibrium vibrational states is close to an analytic approximation provided by Hammerling, Kivel, and Teare for harmonic oscillators all dissociating from the ground rotational state.

Hansen, C. F.↗
NASA NTRS1992

Ejecta patterns of Meteor Crater, Arizona derived from the linear un-mixing of TIMS data and laboratory thermal emission spectra

Accurate interpretation of thermal infrared data depends upon the understanding and removal of complicating effects. These effects may include physical mixing of various mineralogies and particle sizes, atmospheric absorption and emission, surficial coatings, geometry effects, and differential surface temperatures. The focus is the examination of the linear spectral mixing of individual mineral or endmember spectra. Linear addition of spectra, for particles larger than the wavelength, allows for a straight-forward method of deconvolving the observed spectra, predicting a volume percent of each endmember. The 'forward analysis' of linear mixing (comparing the spectra of physical mixtures to numerical mixtures) has received much attention. The reverse approach of un-mixing thermal emission spectra was examined with remotely sensed data, but no laboratory verification exists. Understanding of the effects of spectral mixing on high resolution laboratory spectra allows for the extrapolation to lower resolution, and often more complicated, remotely gathered data. Thermal Infrared Multispectral Scanner (TIMS) data for Meteor Crater, Arizona were acquired in Sep. 1987. The spectral un-mixing of these data gives a unique test of the laboratory results. Meteor Crater (1.2 km in diameter and 180 m deep) is located in north-central Arizona, west of Canyon Diablo. The arid environment, paucity of vegetation, and low relief make the region ideal for remote data acquisition. Within the horizontal sedimentary sequence that forms the upper Colorado Plateau, the oldest unit sampled by the impact crater was the Permian Coconino Sandstone. A thin bed of the Toroweap Formation, also of Permian age, conformably overlays the Coconino. Above the Toroweap lies the Permian Kiabab Limestone which, in turn, is covered by a thin veneer of the Moenkopi Formation. The Moenkopi is Triassic in age and has two distinct sub-units in the vicinity of the crater. The lower Wupatki member is a fine-grained sandstone, while the upper Moqui member is a fissile siltstone. Ejecta from these units are preserved as inverted stratigraphy up to 2 crater radii from the rim. The mineralogical contrast between the units, relative lack of post-emplacement erosion and ejecta mixing provide a unique site to apply the un-mixing model. Selection of the aforementioned units as endmembers reveals distinct patterns in the ejecta of the crater.

Ramsey, Michael S.↗
NASA NTRS2003

Fractals and Spatial Methods for Mining Remote Sensing Imagery

The rapid increase in digital remote sensing and GIS data raises a critical problem -- how can such an enormous amount of data be handled and analyzed so that useful information can be derived quickly? Efficient handling and analysis of large spatial data sets is central to environmental research, particularly in global change studies that employ time series. Advances in large-scale environmental monitoring and modeling require not only high-quality data, but also reliable tools to analyze the various types of data. A major difficulty facing geographers and environmental scientists in environmental assessment and monitoring is that spatial analytical tools are not easily accessible. Although many spatial techniques have been described recently in the literature, they are typically presented in an analytical form and are difficult to transform to a numerical algorithm. Moreover, these spatial techniques are not necessarily designed for remote sensing and GIS applications, and research must be conducted to examine their applicability and effectiveness in different types of environmental applications. This poses a chicken-and-egg problem: on one hand we need more research to examine the usability of the newer techniques and tools, yet on the other hand, this type of research is difficult to conduct if the tools to be explored are not accessible. Another problem that is fundamental to environmental research are issues related to spatial scale. The scale issue is especially acute in the context of global change studies because of the need to integrate remote-sensing and other spatial data that are collected at different scales and resolutions. Extrapolation of results across broad spatial scales remains the most difficult problem in global environmental research. There is a need for basic characterization of the effects of scale on image data, and the techniques used to measure these effects must be developed and implemented to allow for a multiple scale assessment of the data before any useful process-oriented modeling involving scale-dependent data can be conducted. Through the support of research grants from NASA, we have developed a software module called ICAMS (Image Characterization And Modeling System) to address the need to develop innovative spatial techniques and make them available to the broader scientific communities. ICAMS provides new spatial techniques, such as fractal analysis, geostatistical functions, and multiscale analysis that are not easily available in commercial GIS/image processing software. By bundling newer spatial methods in a user-friendly software module, researchers can begin to test and experiment with the new spatial analysis methods and they can gauge scale effects using a variety of remote sensing imagery. In the following, we describe briefly the development of ICAMS and present application examples.

Lam, Nina↗
NASA NTRS1981

Sources of atmospheric methane - Measurements in rice paddies and a discussion

Field measurements of methane fluxes from rice paddies, fresh water lakes, and saltwater marshes have been made to infer estimates of the size of these sources of atmospheric methane. The rice-paddy measurements, the first of their kind, show that the principal means of methane escape is through the plants themselves as opposed to transport across the water-air interface via bubbles or molecular diffusion. Nitrogen-fertilized plants release much more methane than unfertilized plants but even these measured rates are only one fourth as large as those inferred earlier by Koyama (1963, 1964) and on which all global extrapolations have been based to date. Measured methane fluxes from lakes and marshes are also compared to similar earlier data and it is found that extant data and flux-measurement methods are insufficient for reliable global extrapolations.

Cicerone, R. J.↗
DOE OSTI2023

Validation of MFUEL Metal Fuel Performance Models of SAS4A/SASSYS-1

The fuel characterization models of SAS4A/SASSYS-1 (SAS) have recently been extended to include a new U-Pu-Zr metal fuel model, MFUEL. MFUEL is equipped with mechanistic physics based models to predict the pre-transient characterization and transient response of metal fuel, with emphasis on fuel melting, cladding failure, and the metal fuel’s impact on core reactivity. The MFUEL model will be available in the full version of SAS4A/SASSYS-1 5.7, which is scheduled to be released in June 2023. Fast reactor fuel pins that operated in EBR-II and FFTF with low smear density U-Zr and U-Pu-Zr metal fuels and irradiation resistant ferritic-martensitic cladding showed significant advantages in achieving high burnups and assuring inherent safety characteristics during anticipated transients, design basis events, and beyond design basis events. For safety analysis, a fuel performance model must be able to predict (1) Fuel pin mechanics and compositional and dimensional changes, (2) Clad failure, and (3) Fuel pin thermal resistance. Achieving these high level goals accurately is strongly related to the model performance of individual physical processes taking place within a fuel pin during its lifetime. Metal fuels typically operate above the mid-point temperature of melting during normal, as well as off-normal, conditions. At these elevated temperatures, the availability of thermal activation provides a driving force for various diffusional processes leading to complex phase transformations, micro-structure evolution, significant amounts of fuel swelling, interconnected porosity formation, excessive amounts of fission gas release, and fuel clad chemical interactions. Clad failure in fast reactors primarily occurs as a result of creep rupture augmented by clad wastage formation. The reaction is driven by thermal creep induced dislocation motion, grain boundary cavity nucleation, growth and breakup of grain boundaries. The high level complexity and limited available data requires introducing physics-based modeling approaches to gain extrapolation ability and sensitivity with respect to various conditions. The objective of this report is to perform validation of MFUEL using the experimental data for (1) Normal operation EBR-II fuel behavior, (2) Normal operation PHENIX fuel behavior, (3) HT9 Pressure tube ramp-and-hold creep rupture tests, (4) Whole Pin Furnace (WPF) creep strain, creep rupture and eutectic tests, (5) Fuel Behavior Test Apparatus (FBTA) eutectic tests, and (6) TREAT M5-7 OverPower tests up to clad failure. Section-2 includes a brief description of the MFUEL models. A detailed description of the MFUEL physics-based, semi-empirical models will be presented in the SAS V 5.7 theory manual. Section-3, 4, and 5 describes the validation effort for the pre-transient irradiation, furnace transients, and TREAT M-Series transients, respectively.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Linear two-pool models are insufficient to infer soil organic matter decomposition temperature sensitivity from incubations

Abstract Terrestrial carbon (C)-climate feedbacks depend strongly on how soil organic matter (SOM) decomposition responds to temperature. This dependency is often represented in land models by the parameter Q 10 , which quantifies the relative increase of microbial soil respiration per 10 °C temperature increase. Many studies have conducted paired laboratory soil incubations and inferred “active” and “slow” pool Q 10 values by fitting linear two-pool models to measured respiration time series. Using a recently published incubation study (Qin et al. in Sci Adv 5(7):eaau1218, 2019) as an example, here we first show that the very high parametric equifinality of the linear two-pool models may render such incubation-based Q 10 estimates unreliable. In particular, we show that, accompanied by the uncertain initial active pool size, the slow pool Q 10 can span a very wide range, including values as high as 100, although all parameter combinations are producing almost equally good model fit with respect to the observations. This result is robust whether or not interactions between the active and slow pools are considered (typically these interactions are not considered when interpreting incubation data, but are part of the predictive soil carbon models). This very large parametric equifinality in the context of interpreting incubation data is consistent with the poor temporal extrapolation capability of linear multi-pool models identified in recent studies. Next, using a microbe-explicit SOM model (RESOM), we show that the inferred two pools and their associated parameters (e.g., Q 10 ) could be artificial constructs and are therefore unreliable concepts for integration into predictive models. We finally discuss uncertainties in applying linear two-pool (or more generally multiple-pool) models to estimate SOM decomposition parameters such as temperature sensitivities from laboratory incubations. We also propose new observations and model structures that could enable better process understanding and more robust predictive capabilities of soil carbon dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Hydrothermal solubility of Dy hydroxide as a function of pH and stability of Dy hydroxyl aqueous complexes from 25 to 250 °C

The rare earth elements (REE) have important applications in green energy technologies. The formation of mineral deposits in geologic systems commonly involves hydrothermal fluids which can mobilize the REE. However, the REE speciation is not well known as a function of pH. The thermodynamic properties of REE hydroxyl complexes used in geochemical models are based on the Helgeson-Kirkham-Flowers (HKF) equation of state parameters which were derived by extrapolation of low temperature experimental and estimated data. In this study, Dy hydroxide solubility experiments are combined with available literature data to improve these models from 25 to 250 °C and optimize the thermodynamic properties of Dy 3+ and Dy hydroxyl complexes using GEMSFITS. Batch-type solubility experiments were conducted from 150 to 250 °C and at saturated water vapor pressure in perchloric acid solutions with initial pH values of 2 to 5 in 0.5 pH unit increments. The measured solubility of Dy hydroxide is retrograde with temperature and decreases with pH. The logarithm of total dissolved Dy molality ranges from –2.3 to –5.3 at 150 °C (pH 4.7–5.5), from –2.4 to –5.6 at 200 °C (pH 3.9–5.1), and from –3.7 to –6.9 at 250 °C (pH of 3.4 and 5.0). The optimized standard partial molal Gibbs energies of formation (Δ f G° T ) derived for Dy 3+ and DyOH 2+ display a close to linear relationship with temperature, fitting with previous optimizations based on DyPO 4 solubility data in the literature. A comparison of the optimized ΔfG°T values for aqueous Dy species with predictions from available HKF parameters indicates significant differences ranging from +11 to –26 kJ/mol between 25 and 250 °C. The experimental fits are used to derive the Dy hydroxide solubility products (K s0 ) and formation constants for the hydrolysis of Dy (β n with n = 1 to 3; Dy 3+ + nOH – = DyOH n 3-n ) as a function of temperature. The optimization method presented yields accurate thermodynamic properties for the Dy 3+ aqua ions and the DyOH 2+ species at the acidic to mildly acidic pH studied whereas more experimental work is needed at near-neutral and alkaline conditions to better constrain the other hydroxyl complexes. Furthermore, the optimized thermodynamic data have a significant impact on geochemical modeling of the mobility and solubility of REE minerals in acidic hydrothermal fluids.

58 GEOSCIENCES↗
DOE OSTI2019

Predicting the dissolution kinetics of silicate glasses by topology-informed machine learning

Machine learning (ML) regression methods are promising tools to develop models predicting the properties of materials by learning from existing databases. However, although ML models are usually good at interpolating data, they often do not offer reliable extrapolations and can violate the laws of physics. Here, to address the limitations of traditional ML, we introduce a “topology-informed ML” paradigm—wherein some features of the network topology (rather than traditional descriptors) are used as fingerprint for ML models—and apply this method to predict the forward (stage I) dissolution rate of a series of silicate glasses. We demonstrate that relying on a topological description of the atomic network (i) increases the accuracy of the predictions, (ii) enhances the simplicity and interpretability of the predictive models, (iii) reduces the need for large training sets, and (iv) improves the ability of the models to extrapolate predictions far from their training sets. As such, topology-informed ML can overcome the limitations facing traditional ML (e.g., accuracy vs. simplicity tradeoff) and offers a promising route to predict the properties of materials in a robust fashion.

36 MATERIALS SCIENCE↗
DOE OSTI2023

L-H transition studies in tritium and deuterium–tritium campaigns at JET with Be wall and W divertor

The recent deuterium–tritium campaign in JET-ILW (DTE2) has provided a unique opportunity to study the isotope dependence of the L-H power threshold in an ITER-like wall environment (Be wall and W divertor). Here we present results from dedicated L-H transition experiments at JET-ILW, documenting the power threshold in tritium and deuterium–tritium plasmas, comparing them with the matching deuterium and hydrogen datasets. From earlier experiments in JET-ILW it is known that as plasma isotopic composition changes from deuterium, through varying deuterium/hydrogen concentrations, to pure hydrogen, the value of the line averaged density at which the threshold is minimum, ${\bar n_{{\text{e}},{\text{min}}}}$, increases, leading us to expect that ${\bar n_{{\text{e}},{\text{min}}}}$(T) < ${\bar n_{{\text{e}},{\text{min}}}}$(DT) < ${\bar n_{{\text{e}},{\text{min}}}}$(D) < ${\bar n_{{\text{e}},{\text{min}}}}$(H). The new power threshold data confirms these expectations in most cases, with the corresponding ordering of the minimum power thresholds. We present a comparison of this data to power threshold scalings, used for extrapolation to future devices such as ITER and DEMO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗