Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coordinate transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Which electromagnetic equations apply in rotating coordinates

It was discovered some years ago by Schiff that two equations for fields in vacuum do not carry over without change from an inertial frame to a frame with rotating axes of space coordinates, even for a region with all velocities much lower than the speed of light. However, the belief that all four of the field equations are invariant under such conditions is still prevalent and causes misconceptions in physical applications, including astrophysical and geophysical ones. The purpose of the present paper is therefore to call attention to Schiff's discovery, discussing its basis and its extension to fields in material media, and to interpret the additional terms that must be added to the equations in order to obtain valid transformations to rotating axes of coordinates.

Webster, D. L.↗
NASA NTRS1988

The evolution of AAOE observed constituents with the polar vortex

One of the difficulties in determining constituent trends from the ER-2 flight data is the large amount of day to day variability generated by the motion of the polar vortex. To reduce this variability, the observations have been transformed into the conservative (Lagrangian) reference frames consisting of the coordinate pairs, potential temperature (PT) and potential vorticity (PV), or PT and N2O. The requirement of only two independent coordinates rests on the assumption that constituent distributions and their chemical processes are nearly zonal in that coordinate system. Flight data is used everywhere for these transformation except for potential vorticity. Potential vorticity is determined from level flight segments, and NMC PV values during flight dives and takeoffs are combined with flight data in a smooth fashion.

Schoeberl, Mark R.↗
NASA NTRS1994

Growth-phase thinning of the near-Earth current sheet during the CDAW 6 substorm

The thinning of the near-Earth current sheet during the growth phase of the Coordinated Data Analysis Workshop (CDAW) 6 magnetospheric substorm is studied. The expansion onset of the substorm occurred at 1054 UT, March 22, 1979. During the growth phase, two spacecraft, International Sun Earth Explorer (ISEE) 1 and ISEE 2, were within the current sheet approximately 13 R(sub E) from the Earth and obtained simultaneous high-resolution magnetic data at two points in the current sheet. Plasma data were also provided by the ISEE spacecraft and solar wind data by IMP 8. To facilitate the analysis, the GSM magnetic field data are transformed to a 'neutral sheet coordinate system' in which the new x axis is parallel to the average magnetic field above and below the neutral sheet and the new y axis lies in the GSM equatorial plane. A model based on the assumption that the current sheet is a time-invariant structure fails to predict neutral sheet crossing times. Consequently, the Harris sheet model, which allows one to remove the restriction of time invariancy, is used instead. It is found that during the growth phase, a model parameter corresponding to the thickness of the current sheet decreased exponentially from about 5 R(sub E) to 1 R(sub E) with a time constant of about 14 min. In addition, the ISEE 1 and ISEE 2 neutral sheet crossings after expansion onset indicate that the neutral sheet was moving upward at 7 km/s relative to the spacecraft. Since both crossings occurred in approximately 80 s, the current sheet thickness is estimated to be about 500 km. These results demonstrate that the near-Earth current sheet undergoes dramatic thinning during the substorm growth phase and expansion onset.

Sanny, Jeff↗
DOE OSTI2021

Compartmentalization and Photo-Regulating Pathways for Incompatible Tandem Catalysis

This contribution describes an advanced compartmentalized micellar nanoreactor that possesses a reversible photoresponsive feature and its application towards photo-regulating reaction pathways for incompatible tandem catalysis under aqueous conditions. The smart nanoreactor is based on multi-functional amphiphilic poly(2-oxazoline)s and covalently crosslinked with spiropyran upon micelle formation in water. It responds to light irradiation in a wavelength-selective manner switching its morphology as confirmed by dynamic light scattering and cryo-transition electron microscopy. The compartmental structure renders distinct nanoconfinements for two incompatible enantioselective transformations: a rhodium-diene complex-catalyzed asymmetric 1,4-addition occurs in the hydrophilic corona while a Rh-TsDPEN-catalyzed asymmetric transfer hydrogenation proceeds in the hydrophobic core. Control experiments and kinetic studies showed that the gated behavior induced by the photo-triggered reversible spiropyran to merocyanine transition in the cross-linking layer is key to discriminate among substrates/reagents during the catalysis. Here, the smart nanoreactor realized photo-regulation to direct the reaction pathway to give a multi-chiral product with high conversions and perfect enantioselectivities in aqueous media. Our SCM catalytic system, on a basic level, mimics the concepts of compartmentalization and responsiveness Nature uses to coordinate thousands of incompatible chemical transformations into streamlined metabolic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sulfated Zirconium Metal–Organic Frameworks as Well-Defined Supports for Enhancing Organometallic Catalysis

Understanding heterogeneous catalysts is a challenging pursuit due to surface site nonuniformity and aperiodicity in traditionally-used materials. One example is sulfated metal oxides, which function as highly-active catalysts and as supports for organometallic complexes. These applications are due to traits such as acidity, ability to act as a weakly coordinating ligand, and aptitude for promoting transformations via radical cation intermediates. Research is ongoing about the structural features of sulfated metal oxides that imbue the aforementioned properties, such as sulfate geometry and coordination. To better understand these materials, metal–organic frameworks (MOFs) have been targeted as structurally-defined analogs. Composed of inorganic nodes and organic linkers, MOFs possess features such as high porosity and crystallinity, which make them attractive for mechanistic studies of heterogeneous catalysts. In this work, a Zr 6 -based MOF NU-1000 is sulfated and characterized using atomically-precise techniques such as single crystal X-ray diffraction (SCXRD) in addition to diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Here, the dynamic nature of the sulfate binding motif is found to transition from monodentate, to bidentate, to tridentate depending on the degree of hydration, as supported by density functional theory (DFT) calculations. Heightened Brønsted acidity compared to the parent MOF was observed upon sulfation, and probed through trimethylphosphine oxide (TMPO) physisorption, ammonia sorption, in-situ ammonia DRIFTS, and DFT studies. With the support structure benchmarked, an organoiridium complex was chemisorbed onto the sulfated MOF node and the efficacy of this supported catalyst was demonstrated for stoichiometric and catalytic activation of benzene-d6 and toluene with structure-activity relationships derived.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

Solution of viscous internal flows on curvilinear grids generated by the Schwarz-Christoffel transformation

The combination of an orthogonal, curvilinear coordinate generation procedure with a stable forward marching viscous flow solution technique is presently employed in the solution of flow fields for arbitrary, axisymmetric ducts. Coordinate generation is accomplished by means of both potential lines and plane potential flow streamlines. Since the coordinate streamlines approximate actual ones, the equations of motion for viscous compressible flow can be parabolized in order to solve for both the boundary layer and the core flow in a single streamwise pass. The method's versatility is demonstrated by two examples of viscous compressible swirling flow through complex radial gas turbine passages.

Anderson, O. L.↗
DOE OSTI2025

Bundling measures for food systems transformation: a global, multimodel assessment

Background Current food systems leave one in ten individuals at risk of hunger while driving unsustainable environmental impacts. Inaction risks further exacerbating negative impacts on both human and planetary health. These challenges emerge from complex system interactions, requiring approaches that engage with this complexity and consider how transformation measures interact across food systems. We aimed to quantify the magnitude and uncertainty of the impacts of key food systems transformation measures both individually and in a bundle using an ensemble of global economic models. Methods In this global multimodel assessment, we applied an ensemble of ten state-of-the-art global economic models to evaluate the potential of four key measures in transforming food systems: increasing agricultural productivity, halving food loss and waste, shifting towards healthier diets, and economy-wide climate mitigation policies aligned with limiting warming to 1·5°C. The scenarios used a middle-of-the-road shared socioeconomic pathway for population and gross domestic product growth, climate impact data from Jägermeyr and colleagues, Thornton and colleagues, and Nelson and colleagues, and dietary targets based on the EAT–Lancet healthy reference diet, with model simulations conducted from 2020 to 2050. We then assessed the effect of these measures in isolation and in combination in a bundled scenario. To further understand the interactions between these measures, we conducted a decomposition analysis that distinguishes between the individual effects of a measure (effect when implemented alone), total effects (its contribution within the bundle), and interaction effects (the difference between total and individual effects). This approach aimed to show complementarities and trade-offs that emerge when multiple measures are implemented simultaneously. Findings Our analysis showed that individual measures in isolation are insufficient to achieve high-level environmental objectives and might generate unintended consequences. In contrast, bundling measures produces co-benefits: avoiding 50% of projected agricultural greenhouse gas emissions by 2050 and almost 20% of anticipated land conversion, while moderating food price increases associated with ambitious climate change mitigation policies. Our decomposition analysis further shows that measures can have varying effects across different dimensions. Although dietary shifts and climate mitigation policies are the largest drivers of environmental benefits (each contributing to a median decline of >10 percentage points in non-CO 2 emissions and 5 percentage points in agricultural land use globally), productivity improvements and reducing food loss and waste play essential roles in moderating price increases (each contributing to a median decline of >5 percentage points in average prices). Interpretation This study highlights the importance of implementing coordinated approaches to food system transformation and climate change mitigation rather than relying on isolated interventions. Comprehensive transformation requires understanding how supply-side and demand-side changes can interact with climate mitigation policies, enabling policy makers to design intervention packages that maximise benefits while minimising trade-offs across environmental, economic, and social dimensions.

Sundiang, Marina [Cornell Univ., Ithaca, NY (Unite↗
NASA NTRS1990

Dynamic substructuring by the boundary flexibility vector method of component mode synthesis

Component mode synthesis (CMS) is a method of dynamic analysis, for structures having a large number of degrees of freedom (DOF). These structures often required lengthy computer CPU time and large computer memory resources, if solved directly by the finite-element method (FEM). In CMS, the structure is divided into independent components in which the DOF are defined by a set of generalized coordinates defined by displacement shapes. The number of the generalized coordinates are much less than the original number of physical DOF, in the component. The displacement shapes are used to transform the component property matrices and any applied external loads, to a reduced system of coordinates. Reduced system property matrices are assembled, and any type of dynamic analysis is carried out in the reduced coordinate system. Any obtained results are back transformed to the original component coordinate systems. In all conventional methods of CMS, the mode shapes used for components are dynamic mode shapes, supplemented by static deflected shapes. Historically, all the dynamic mode shapes used in conventional CMS are the natural modes (eigenvectors) of components. A new method of CMS, namely the boundary flexibility vector method of CMS, is presented. The method provides for the incorporation of a set of static Ritz vectors, referred to as boundary flexibility vectors, as a replacement and/or supplement to conventional eigenvectors, as displacement shapes for components. The generation of these vectors does not require the solution of a costly eigenvalue problem, as in the case of natural modes in conventional CMS, and hence a substantial saving in CPU time can be achieved. The boundary flexibility vectors are generated from flexibility (or stiffness) properties of components. The formulation presented is for both free and fixed-interface components, and for both the free and forced vibration problems. Free and forced vibration numerical examples are presented to verify the accuracy of the method and the saving in CPU time. Compared to conventional methods of CMS, the results indicate that by using the new method, more accurate results can be obtained with a substantial saving in CPU time.

Abdallah, Ayman Ahmed↗
NASA NTRS1996

Wing Twist Measurements at the National Transonic Facility

A technique for measuring wing twist currently in use at the National Transonic Facility is described. The technique is based upon a single camera photogrammetric determination of two dimensional coordinates with a fixed (and known) third dimensional coordinate. The wing twist is found from a conformal transformation between wind-on and wind-off 2-D coordinates in the plane of rotation. The advantages and limitations of the technique as well as the rationale for selection of this particular technique are discussed. Examples are presented to illustrate run-to-run and test-to-test repeatability of the technique in air mode. Examples of wing twist in cryogenic nitrogen mode are also presented.

Burner, Alpheus W.↗
NASA NTRS2000

Extension of Efficient Low Dissipative High Order Schemes for 3-D Curvilinear Moving Grids

The efficient low dissipative high order schemes proposed by Yee et al. is formulated for 3-D curvilinear moving grids. These schemes consists of a high order base schemes combined with nonlinear characteristic filters. The amount of numerical dissipation is minimized by applying the schemes to the entropy splitting form of the inviscid flux derivatives. The analysis is given for a thermally perfect gas. The main difficulty in the extension of higher order schemes that were formulated in Cartesian coordinates to curvilinear moving grids is the higher order transformed metric evaluations. The higher order numerical evaluation of the transformed metric terms to insure freestream preservation is done in a coordinate invariant manner. The formulation is an improvement over existing formulation of high order scheme in curvilinear moving grids.

Vinokur, Marcel↗
DOE OSTI2026

Hollow-structured Ni-N-C catalysts for highly selective CO 2 electroreduction

Atomically dispersed single-atom catalysts have emerged as promising non-precious catalyst alternatives to expensive Ag and Au catalysts for electrochemical CO 2 reduction reaction (CO 2 RR). In particular, nickel-nitrogen-carbon (Ni-N-C) catalysts have demonstrated a high faradaic efficiency (FE) toward CO formation at low overpotentials. Nonetheless, the exact nature of Ni active sites under CO 2 RR remains elusive and conventional Ni-N-C catalysts are limited by microporosity and low density of Ni single atoms, hindering performance in CO 2 electrolyzers. Here, we report the synthesis of hollow-structured Ni-N-C ( hs -Ni-N-C) catalysts via a post-synthesis modification (PSM) strategy using partial ligand exchange of 2-methylimidazole with 3-amino-1,2,4-triazole. This approach enables the formation of a hollow structure, resulting in more than a twofold increase in Ni atom density compared to regular Ni-N-C (r-Ni-N-C). In a zero-gap CO 2 electrolyzer, the optimized hs -Ni-N-C allows for achieving an FE CO of 97% at a current density of > 100 mA cm⁻ 2 , while maintaining high CO selectivity with stable performance over 100 h at 2.5 V. hs-Ni-N-C shows a more than sevenfold increase in the CO partial current density relative to r-Ni-N-C resulting from the combined effects of a higher density of Ni single-atom sites, improved kinetics, and lower transport resistance under the operating conditions, as indicated by electrochemical impedance spectra and distribution of relaxation times analysis. Operando high energy-resolution X-ray absorption spectroscopy (XAS) reveals that atop-bonded CO on Ni single sites induces dynamic transformations of the Ni–N coordination environment, leading to a symmetric coordination structure of hs -Ni-N-C. Under CO 2 RR, the catalysts undergo a more pronounced structural change and form a minor fraction of Ni nanoparticles. Density functional theory calculations are consistent with the XAS results and provide molecular insights showing that the interplay between protonation and CO adsorption leads to adsorbate-induced restructuring of the Ni single atom. This work demonstrates the synergistic role of hollow structure and high-density Ni atoms in governing CO 2 RR selectivity and provides mechanistic insights into the structural dynamics of single-atom catalysts under operating conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Solution of the linear wave-particle kinetic equation for global modes of arbitrary frequency in a tokamak

The linear response of a plasma to perturbations of arbitrary frequency and wavelength is derived for any axisymmetric magnetized toroidal plasma. An explicit transformation to action-angle coordinates is achieved using orthogonal magnetic coordinates and the Littlejohn Lagrangian, establishing the validity of this result to arbitrary order in normalized Larmor radius. The global resonance condition for compressional modes is clarified in more detail than in previous works, confirming that the poloidal orbit-average of the cyclotron frequency gives the desired result at lowest order in Larmor radius. The global plasma response to the perturbation at each resonance is captured by a poloidal and gyroaverage of the perturbing potential. A “global gyroaveraging” of the potential is a natural by-product of this analysis which takes into account the changing of the magnetic field over an orbit. The resonance condition depends on two arbitrary integers which completely separately capture the effects poloidal non-uniformity and finite Larmor radius in generating sidebands. We learn that poloidal sidebands generated for compressional modes are dominated by the change in gyrofrequency over the orbit, which is very different to shear modes where the gyrofrequency only contributes via a finite Larmor radius effect. This increases the number of bounce harmonics required to compute the linear drive, giving a more complicated resonance map. An example calculation is given comparing resonance of shear and compressional modes in a published DIII-D case.

Compressional↗
DOE OSTI2020

Comparing light-front quantization with instant-time quantization

Here in this paper we compare light-front quantization and instant-time quantization both at the level of operators and at the level of their Feynman diagram matrix elements. At the level of operators light-front quantization and instant-time quantization lead to equal light-front time commutation (or anticommutation) relations that appear to be quite different from equal instant-time commutation (or anticommutation) relations. Despite this we show that at unequal times instant-time and light-front commutation (or anticommutation) relations actually can be transformed into each other, with it only being the restriction to equal times that makes the commutation (or anticommutation) relations appear to be so different. While our results are valid for both bosons and fermions, for fermions there are subtleties associated with tip of the light cone contributions that need to be taken care of. At the level of Feynman diagrams we show for non-vacuum Feynman diagrams that the pole terms in four-dimensional light-front Feynman diagrams reproduce the widely used three-dimensional light-front on-shell Hamiltonian Fock space formulation in which the light-front energy and light-front momentum are on shell. Moreover, we show that the contributions of pole terms in non-vacuum instant-time and non-vacuum light-front Feynman diagrams are equal. However, because of circle at infinity contributions we show that this equivalence of pole terms fails for four-dimensional light-front vacuum tadpole diagrams. Then, and precisely because of these circle at infinity contributions, we show that light-front vacuum tadpole diagrams are not only nonzero, they quite remarkably are actually equal to the pure pole term instant-time vacuum tadpole diagrams. Light-front vacuum diagrams are not correctly describable by the on-shell Hamiltonian formalism, and thus not by the closely related infinite momentum frame prescription either. Thus for the light-front vacuum sector we must use the off-shell Feynman formalism as it contains information that is not accessible in the on-shell Hamiltonian Fock space approach. We show that light-front quantization is intrinsically nonlocal, and that for fermions this nonlocality is present in Ward identities. One can project fermion spinors into so-called good and bad components, and both of these components contribute in Ward identities. Central to our analysis is that the transformation from instant-time coordinates and fields to light-front coordinates and fields is a unitary, spacetime-dependent translation. Consequently, not only are instant-time quantization and light-front quantization equivalent, because of general coordinate invariance they are unitarily equivalent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Pressure-Induced Multidimensional Assembly and Sintering of CuInS 2 Nanoparticles into Lamellar Nanosheets with Band Gap Narrowing

Two-dimensional (2D) nanomaterials have fascinating structural, electrical, and optical properties, especially strong excitonic effects due to decreased dielectric screening. However, constructing 2D ultrathin nanomaterials, with the exception of layered materials, remains a challenge. In this work, we successfully realize oriented attachment on guiding one-dimensional chalcopyrite CuInS 2 nanocrystal (NC) formation and 2D assembly into lamellar nanosheets by applying pressure-driven sintering of zero-dimensional CuInS2 nanoparticles (NPs). We discuss the atomic-level mechanism of such phenomena and illustrate a pressure-driven processing diagram that reveals the sintering process of NPs coordinated by pressure and structural transformation. Optical measurements exhibit that the band gap has a narrowing by 0.21 eV compared with the initial 2.03 eV upon decompression to ambient conditions. Our findings represent a significant step forward in gaining an in-depth understanding of the pressure-driven morphology engineering of nanomaterials and provide a promising strategy to prepare 2D NCs, thereby greatly increasing the choice of materials for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The magnetic structure of long-wavelength magnetohydrodynamic modes in current-carrying stellarator plasmas

Magnetic field fluctuations are observed in current-carrying stellarator plasmas when the rotational transform is close to a rational value at the edge of the plasma. At low plasma pressure, these fluctuations are associated with perturbed currents parallel to the equilibrium magnetic field lines. A model for these magnetohydrodynamic modes in a low-β, three-dimensional stellarator equilibria has been developed. A set of helical current filaments are constrained to mimic the structure of magnetic field lines on rational surfaces derived from three-dimensional (3D) equilibrium reconstructions. Transformation to straight field line coordinates then allows fitting of the poloidal magnetic sensor data to a single harmonic function, which fixes the modeled toroidal mode structure via the field line flow geometry. The developed procedure accurately captures phase and amplitude variation for m/n = 3/2, 3/1, and 4/1 modes in the 3D equilibria of the compact toroidal hybrid experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Novel angular velocity estimation technique for plasma filaments

Magnetic field aligned filaments such as blobs and edge localized mode filaments carry significant amounts of heat and particles to the plasma facing components and they decrease their lifetime. The dynamics of these filaments determine at least a part of the heat and particle loads. These dynamics can be characterized by their translation and rotation. In this paper, we present an analysis method novel for fusion plasmas, which can estimate the angular velocity of the filaments on frame-by-frame time resolution. After pre-processing, the frames are two-dimensional (2D) Fourier-transformed, then the resulting 2D Fourier magnitude spectra are transformed to log-polar coordinates, and finally the 2D cross-correlation coefficient function (CCCF) is calculated between the consecutive frames. The displacement of the CCCF’s peak along the angular coordinate estimates the angle of rotation of the most intense structure in the frame. Further, the proposed angular velocity estimation method is tested and validated for its accuracy and robustness by applying it to rotating Gaussian-structures. The method is also applied to gas-puff imaging measurements of filaments in National Spherical Torus Experiment plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1975

Acoustic eigenmodes of corrugated ducts

Acoustic propagation in two-dimensional corrugated ducts is analyzed. A transform is made to a coordinate system that matches the duct walls. The resulting wave equation separates in space and time. The spatial differential equation is then solved by expanding in the eigenfunctions of a flat-walled duct. The prescription for this expansion is given by the appropriate application of time-independent perturbation theory. Calculations of first-order corrections for a periodic duct of both finite and infinite length are presented.

Succi, G. P.↗