Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Carbide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Engineering the formation of spin-defects from first principles

The full realization of spin qubits for quantum technologies relies on the ability to control and design the formation processes of spin defects in semiconductors and insulators. We present a computational protocol to investigate the synthesis of point-defects at the atomistic level, and we apply it to the study of a promising spin-qubit in silicon carbide, the divacancy (VV). Our strategy combines electronic structure calculations based on density functional theory and enhanced sampling techniques coupled with first principles molecular dynamics. We predict the optimal annealing temperatures for the formation of VVs at high temperature and show how to engineer the Fermi level of the material to optimize the defect’s yield for several polytypes of silicon carbide. Our results are in excellent agreement with available experimental data and provide novel atomistic insights into point defect formation and annihilation processes as a function of temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Atomically thin half-van der Waals metals enabled by confinement heteroepitaxy

Atomically thin two-dimensional (2D) metals may be key ingredients in next-generation quantum and optoelectronic devices. However, 2D metals must be stabilized against environmental degradation and integrated into heterostructure devices at the wafer scale. The high-energy interface between silicon carbide and epitaxial graphene provides an intriguing framework for stabilizing a diverse range of 2D metals. In this paper we demonstrate large-area, environmentally stable, single-crystal 2D gallium, indium and tin that are stabilized at the interface of epitaxial graphene and silicon carbide. The 2D metals are covalently bonded to SiC below but present a non-bonded interface to the graphene overlayer; that is, they are ‘half van der Waals’ metals with strong internal gradients in bonding character. These non-centrosymmetric 2D metals offer compelling opportunities for superconducting devices, topological phenomena and advanced optoelectronic properties. For example, the reported 2D Ga is a superconductor that combines six strongly coupled Ga-derived electron pockets with a large nearly free-electron Fermi surface that closely approaches the Dirac points of the graphene overlayer.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Grain boundary zirconia-modified garnet solid-state electrolyte

Here, we report a method for promoting electrochemical stability in garnet Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 solid-state electrolyte based on a composite two-phase oxide–oxide microstructure. Grain boundary precipitation of the controlled distribution of amorphous zirconium oxide microparticles is achieved through the addition of reactive tantalum carbide. During ambient-atmosphere sintering, the carbide decomposes through an in situ reaction, the ‘extra’ Ta substituting for Zr within the Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 lattice. Density functional theory (DFT) calculations identify a thermodynamically favourable reaction path and show how substituting Ta 5+ at Zr 4+ sites affects the crystal structure as well as bulk ionic and electronic conductivities. Quantitative stereology highlights that zirconia also acts as a sintering aid, reducing compact porosity. Cryogenic focused-ion-beam scanning electron microscopy and fractography analysis of cycled solid-state electrolytes illustrates that near-universally observed intergranular Li-metal dendrite propagation is suppressed by the two-phase microstructure, favouring transgranular dendrites instead. Importantly, DFT demonstrates that compared with the Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 surface, the zirconium oxide surface per se is less electronically conductive and does not trap excess electrons to reduce Li ions. This is a key reason for the substantial improvement in the electrochemical properties over the single-phase baseline.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evidence of a magnetic transition in atomically thin Cr 2 TiC 2 T x MXene

Two-dimensional (2D) transition metal carbides and nitrides known as MXenes have shown attractive functionalities such as high electronic conductivity, a wide range of optical properties, versatile transition metal and surface chemistry, and solution processability. Although extensively studied computationally, the magnetic properties of this large family of 2D materials await experimental exploration. 2D magnetic materials have recently attracted significant interest as model systems to understand low-dimensional magnetism and for potential spintronic applications. Here, we report on synthesis of Cr 2 TiC 2 T x MXene and a detailed study of its magnetic as well as electronic properties. Using a combination of magnetometry, synchrotron X-ray linear dichroism, and field- and angular-dependent magnetoresistance measurements, we find clear evidence of a magnetic transition in Cr 2 TiC 2 T x at approximately 30 K, which is not present in its bulk layered carbide counterpart (Cr 2 TiAlC 2 MAX phase). Overall, this work presents the first experimental evidence of a magnetic transition in a MXene material and provides an exciting opportunity to explore magnetism in this large family of 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tunable electrochromic behavior of titanium-based MXenes

Two-dimensional transition metal carbides, nitrides and carbonitrides, popular by the name MXenes, are a promising class of materials as they exhibit intriguing optical, optoelectronic and electrochemical properties. Taking advantage of their metallic conductivity and hydrophilicity, titanium carbide MXenes (Ti 3 C 2 T x and others) are used to fabricate solution processable transparent conducting electrodes (TCEs) for the design of three-electrode electrochromic cells. However, the tunable electrochromic behavior of various titanium-based MXene compositions across the entire visible spectrum has not yet been demonstrated. Here, we investigate the intrinsic electrochromic properties of titanium-based MXenes, Ti 3 C 2 T x , Ti 3 CNT x , Ti 2 CT x , and Ti 1.6 Nb 0.4 CT x , where individual MXenes serve as a transparent conducting, electrochromic, and plasmonic material layer. Plasmonic extinction bands for Ti 3 C 2 T x , Ti 2 CT x and Ti 1.6 Nb 0.4 CT x are centered at 800, 550 and 480 nm, which are electrochemically tunable to 630, 470 and 410 nm, respectively, whereas Ti 3 CNT x shows a reversible change in transmittance in the wide visible range. Additionally, the switching rates of MXene electrodes with no additional transparent conductor electrodes are estimated and correlated with the respective electrical figure of merit values. This work demonstrates that MXene-based electrochromic cells are tunable in the entire visible spectrum and suggests the potential of the MXene family of materials in optoelectronic, plasmonic, and photonic applications, such as tunable visible optical filters and modulators, to name a few.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic signature of negative electronic compressibility from the Ti core-level of titanium carbonitride MXene

Two-dimensional transition metal carbides, carbonitrides, and nitrides called MXenes exhibit high metallic conductivity, ion intercalation capability and reversible redox activity, prompting their applications in energy storage and conversion, electromagnetic interference (EMI) shielding, and electronics, among many other fields. It has been shown that replacement of about 50% of carbon atoms in the most popular MXene family member, titanium carbide (Ti 3 C 2 T x ), by nitrogen atoms, forming titanium carbonitride (Ti 3 CNT x ), leads to drastically different properties, such as very high negative charge in solution and extreme EMI shielding effectiveness, exceeding all known materials, even metals at comparable thicknesses. Here, by using ultraviolet photoemission spectroscopy (UPS), the electronic structures of Ti 3 CNT x and Ti 3 C 2 T x are systematically investigated and compared as a function of charge carrier density. We observe that, in contrast to Ti 3 C 2 T x , the Ti 3p core-level of Ti 3 CNT x exhibits a counterintuitive shift to a lower binding energy of up to approximately 250 meV upon increasing the electron density, which is a spectroscopic signature of negative electronic compressibility (NEC). These experimentally measured chemical potential shifts are well-captured by the density functional theory (DFT) calculation. The DFT results also further suggest that the hybridization of titanium-nitrogen bonding in Ti 3 CNT x helps promoting the available states of Ti atoms for receiving more electron above the Fermi level and leads to the observed NEC. Furthermore, our findings explain the differences in electronic properties between the two very important and widely studied MXenes and also suggest a new strategy to apply the NEC effect of Ti 3 CNT x in energy and charge storage applications.

2D materials↗
DOE OSTI2021

Characterization of injection and confinement improvement through impurity induced profile modifications on the Wendelstein 7-X stellarator

Pulsed injections of boron carbide granules into Wendelstein 7-X stellarator (W7-X) plasmas transiently increase the plasma stored energy and core ion temperatures above the reference W7-X experimental programs by up to 30%. In a series of 4 MW electron cyclotron resonance heating experiments, the PPPL Probe Mounted Powder Injector provided 50 ms bursts of 100 μm granules every 350 ms at estimated quantities ranging from approximately 1 mg/pulse to over 30 mg/pulse. For each injection, the stored energy was observed to initially drop and the radiated power transiently increased, while the radial electron density profile rose at the edge as material was assimilated. Once the injected boron carbide was fully absorbed, the density rise transitioned to the core while the stored energy increased above the previous baseline level by an amount linearly correlated with the injection quantity. During the injection, the ion temperature gradient steepened with peak core ion temperatures observed to increase from a nominal 1.7 keV to over 2.6 keV for the largest injection amounts. Enhanced performance is accompanied by a reversal of the radial electric field at ρ < 0.3, indicating that the core transport has switched to the ion root. These observations are suggestive of a change in transport and provide further evidence that externally induced profile modifications provide a possible path to enhanced W7-X performance metrics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Multiphysics Analyses of the Bottom Components of the 3D Printed Transformational Challenge Reactor

This research presents multi-physics analyses on the bottom components of the Transformational Challenge Reactor (TCR) facility. These components include the bottom axial reflector and the steel exit cone. The bottom axial reflector is made of pure silicon carbide elements hosting helium cooling channels These elements are 3D printed and therefore can host any arbitrary shape of the helium cooling channels. The design of the bottom reflector considers the neutronics and thermo-fluid dynamics performances as well as the manufacturing process optimization. More precisely, the best design of the bottom reflector reduces neutron leakage by avoiding straight cylindrical helium channels that facilitate neutron leakage, minimizes the helium flow pressure drop, and reduces the number of 3D printed silicon carbide pieces. The exit cone steel structure collects the hot helium from the bottom fuel assemblies and channels the cold helium to the top of the fuel assemblies. The steel simultaneous contact with hot and cold helium flows sets a large thermal gradient. Different designs of the exit cone are proposed to reduce the steel equivalent stress from the helium thermal load. The multi-physics analyses have been performed using Ansys Fluent, Ansys Mechanical, STAR-CCM+, and Serpent computer programs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Evaluation of Radiation Transport Through a Nuclear-Grade Sandwich Composite

The development and deployment of microreactors are often synonymous with their transportability; however, designing a shield which is appropriate for both transportation and operations is challenging. A recent approach is the use of composite style shield which combines the reactor pressure vessel and biological shielding into a single unit to enhance the shields effectiveness without degrading the structural properties. To assess the viability of a nuclear grade sandwich composite (NGSC), and understanding of how radiation transports through the shield needs to be understood to select the appropriate materials. This work examines a two-layered NGSC of varying thicknesses with two primary shielding materials (tungsten-tetraboride cermet and boron carbide). To assess the NGSC, quantities of interest including neutron attenuation, photon attenuation, energy deposition, displacements per atom, helium generation, and dose are examined. Altogether, it is found that a combination of both tungsten-tetraboride and boron carbide are necessary to act as an appropriate shield, where the order in which these materials are place in the composite are important to their effectiveness.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Microstructure and creep strength of simulated intercritical heat-affected zone of grade 91 steel

The intercritical heat affected zone (ICHAZ) has been reported as one of the most Type IV cracking susceptible regions in 9Cr creep-resistant steel weldments. However, creep degradation mechanisms within the ICHAZ itself need further clarifications. In this work, two ICHAZ specimens of Grade 91 steel, low-temperature ICHAZ (LT-ICHAZ) and high-temperature ICHAZ (HT-ICHAZ), were simulated using the Gleeble thermomechanical system by exposing to two peak temperatures (860 °C and 900 °C) between $A_{C1}$ and $A_{C3}$. Dramatically different creep strengths of two simulated ICHAZs were observed and studied. We report dilation curve analysis indicates a high fraction of newly transformed martensite formed in the HT-ICHAZ, which results in a much higher hardness (360 HV0.5) of the HT-ICHAZ than 266 HV0.5 of LT-ICHAZ. Precipitates, especially $M_{23}C_6$ carbides, were not fully dissolved in both ICHAZ specimens. After a typical postweld heat treatment (760 °C-2 hours), the faster recovery of low-carbon martensite and reduced precipitation strengthening due to $M_{23}C_6$ carbides coarsening in the HT-ICHAZ led to a significant hardness reduction. These microstructural degradations in the HT-ICHAZ made its creep lifetime about 36 times shorter than that of the LT-ICHAZ tested at 650 °C. The remaining tempered martensite from base metal in the LT-ICHAZ was the primary contributor to maintain its high creep resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Towards robust PICOSEC Micromegas precise timing detectors

The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector consisting of a Cherenkov radiator combined with a photocathode and a MM amplifying structure. A 100-channel PICOSEC MM prototype with 10 × 10 cm 2 active area equipped with a Cesium Iodide (CsI) photocathode demonstrated a time resolution below σ = 18 ps. The objective of this work is to improve the PICOSEC MM detector robustness aspects, i.e. integration of resistive MM and carbon-based photocathodes, while maintaining good time resolution. The PICOSEC MM prototypes have been tested in laboratory conditions and successfully characterised with 150 GeV/c muon beams at the CERN SPS H4 beam line. The excellent timing performance below σ = 20 ps for an individual pad obtained with the 10 × 10 cm 2 area resistive PICOSEC MM of 20 MΩ/$\square$ showed no significant time resolution degradation as a result of adding a resistive layer. A single-pad prototype equipped with a 12 nm thick Boron Carbide (B 4 C) photocathode presented a time resolution below σ = 35 ps, opening up new possibilities for detectors with robust photocathodes. The results made the concept more suitable for the experiments in need of robust detectors with good time resolution.

RETHGEM↗
DOE OSTI2024

Structural and Morphological Characteristics of Rare Earth Element-based MAX Phase and MXene

There has been a tremendous effort for the synthesis of crystalline MAX phases—a family of transition metal carbides and nitrides with a chemical formula of Mn+1AXn, where M is an early transition metal, A belongs to groups XIII – XVI in the periodic table, X is either C or N, and n can be in between 1 and 3. Furthermore, these materials have shown thermal and electrical conductance and have low density and high stiffness which open broad aspects of practical applications. Recently double transition metal MAX phases (M’ 2/3 M’’ 1/3 ) 2 AX - out-of-plane ordered, labeled as o-MAX and in-plane ordered, labeled as i-MAX, were reported. However, there are few reports on the synthesis and characterization of i-MAX and the corresponding MXenes. In this work, we synthesized Molybdenum-based rare earth containing i-MAX phase using arc melt technique. We then removed “A” element of i-MAX phase by acid treatment and sonication which resulted in two-dimensional (2D) transition metal carbides called MXenes. These MXenes offer high conductivity, hydrophilicity, magnetism, good dispersion ability in solvents, mechanical stability, and structural diversity with at least 100 stoichiometric MXene compositions and are recognized as multifunctional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

First-principles investigation of structure-property relationships in stable and metastable MXenes

Understanding the structure–property relationships in layered transition-metal carbides or nitrides, known as MXenes, is of critical importance for their rational design, synthesis, and application. However, the vast chemical and structural diversity of MXenes, stemming from their wide range of M and X elements, surface terminations, and different atomic coordination environments, makes it challenging to clearly understand these structure–property relationships. Here, in this work, we perform first-principles density functional theory (DFT) calculations and molecular dynamics (MD) simulations to comprehensively investigate the stability and a variety of physical properties of MXenes with different coordination environments. Using Ti- and Mo-based carbide MXenes as model systems, energetic calculations reveal that Ti-based MXenes are most stable in octahedral coordination, whereas Mo-based MXenes preferentially adopt prismatic coordination. This fundamental difference in preferred atomic coordination gives rise to markedly distinct properties between these two systems as a function of the fraction of octahedral and prismatic sites. For instance, the in-plane stiffness of Ti-based MXenes increases as octahedral coordination becomes dominant, but it decreases in the Mo-based MXenes under the same conditions. Additional stability analyses based on mechanical, lattice-dynamical, and temperature-dependent thermodynamic properties demonstrate that many metastable MXenes not only satisfy the strict stability criteria but can also undergo phase transitions among different structures and even become stabilized at elevated temperatures. Although surface terminations, such as F and O atoms, do not alter the energetic ordering or the overall stiffness trends among stable and metastable MXenes, they influence other material properties. For instance, O termination can induce semiconducting behavior in both stable and metastable Ti 2 ⁢CO 2 MXenes. This study significantly advances the fundamental understanding of structure–property relationships in MXenes and provides valuable guidance for developing coordination-based design principles to precisely engineer MXenes with improved properties.

Oyeniran, Noah [University of Alabama, Tuscaloosa,↗
DOE OSTI2021

Properties of SiC-Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration

In this work, we report the physical and mechanical properties of ceramic composite materials fabricated by binder jet 3D printing (BJ3DP) with silicon carbide (SiC) powders, followed by phenolic resin infiltration and pyrolysis (IP) to generate carbon, and a final reactive silicon melt infiltration step. After two phenolic resin infiltration and pyrolysis cycles; porosity was less than 2%, Young's modulus was close to 300 GPa, and the flexural strength was 517.6 ± 24.8 MPa. However, diminishing returns were obtained after more than two phenolic resin infiltration and pyrolysis cycles as surface pores in carbon were closed upon the formation of SiC, resulting in reaction choking and residual-free carbon and porosity. The instantaneous coefficient of thermal expansion of the composite was found to be independent of the number of phenolic IP cycles and had values of between 4.2 and 5.0 ppm/°C between 300 and 100°C, whereas the thermal conductivity was found to have a weak dependence on the number of phenolic IP cycles. While the manufacturing procedures described here yielded highly dense, gas impermeable, siliconized SiC composites with properties comparable to those of bulk siliconized silicon carbide processed according to conventional techniques, BJ3DP enables the manufacture of objects with complex shape, unlike conventional techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2022

DESIGN AND TESTING OF DIMES CARBON ABLATION RODS IN THE DIII-D TOKAMAK

We present the design of ATJ graphite rods developed for ablation experiments under high heat flux (up to 50 MW/m2) in the lower divertor of the DIII-D tokamak, a magnetic plasma confinement device. This work is motivated by the need to test ablation models relevant to carbon-based thermal shields used in high-speed spacecraft atmospheric entries, where the heat fluxes encountered can be comparable to those achieved in the DIII-D divertor plasma. Several different designs for the flowfacing side of the rod are analyzed, including "sharp nose," "blunt," and "concave". The last shape is studied for its potential to lower heat fluxes at the rod surface by increased radiation from trapped neutrals and reduced parallel plasma pressure. We also analyze the possibility of applying a thin (approximately 30 microns) layer of silicon carbide (SiC) to the exposed part of several carbon ablation rods to benchmark its erosion calculations and lifetime predictions. Such calculations are of interest as SiC represents a promising material for both thermal protection systems (TPS) and a fusion plasma-facing material (PFM). Preliminary results from the DIII-D rod ablation experiments are also discussed.

Orlov, Dmitri M.↗
DOE OSTI2020

In-Cu alloy substrates for low-temperature chemical vapor deposition of Mo2C

Two-dimensional transition metal carbides are promising materials because of their potential for combining the favorable properties of transition metal carbides with the high aspect ratio of two-dimensional materials. Though commonly produced by top-down wet-chemical synthesis methods, synthesis by chemical vapor deposition is being considered because of its ability to achieve large areas, controlled layer thickness, and reduced defect density. Typically, liquid Cu is used as a synthesis substrate, though the high melting temperature of Cu (1085 °C) requires high synthesis temperatures. Thus, alternative substrates have been studied in order to reduce the necessary melting temperature. This work systematically studies the impact of synthesis parameters and substrate composition on the growth of ultrathin Mo2C (∼4–120 nm thick) by chemical vapor deposition on an In-Cu alloy. Mo2C flake size increases, and graphene/Mo2C heterostructures form with an increase in the methane flow rates. Increasing the In composition slightly decreases surface coverage and coalescence but does not appreciably impact the Mo2C flake size. Increasing In content also decreases the alloy substrate melting temperature so that a lower temperature synthesis (800 °C) can be performed. However, the necessary high temperatures for pyrolysis of methane lead to a lower limit for the synthesis temperature, similar to graphene.

Young, Katherine T. (ORCID:0000000285845576)↗
DOE OSTI2021

Impact of carrier wafer on etch rate, selectivity, morphology, and passivation during GaN plasma etching

The choice of carrier wafer was found to significantly influence etch rates, selectivity, and morphology in GaN micropillar etching in a Cl 2 -Ar high-density inductively coupled plasma. 7 × 7 mm 2 GaN on sapphire chips with a plasma-enhanced chemical vapor deposition SiO 2 hard mask was etched on top of 4-in. fused silica, silicon carbide, silicon, sapphire, aluminum nitride, and high purity aluminum carriers. Silicon and silicon carbide carriers reduced GaN:SiO 2 selectivity because incidental SiCl x and CCl x etch products from the carriers attack the SiO 2 mask. Aluminum nitride and high-purity aluminum carriers yielded the highest GaN:SiO 2 selectivities due to the deposition of Al-based etched by-products, while the highest GaN etch rate was achieved using the sapphire carrier since it was the most inert carrier and did not sink any Cl 2 . Overall, results indicate that SiO 2 and Al may be used as passivation materials during GaN etching, as vertical profiles were achieved when SiO 2 or Al is redeposited from the fused silica and aluminum carriers, respectively. Floor pitting, trenching, sidewall roughness, and faceting were all influenced by carrier wafer type and will be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Irradiation Vehicles for Evaluating SiC/SiC Cladding Bowing Under Neutron Flux Gradients

Silicon carbide fiber–reinforced silicon carbide matrix (SiC/SiC) composites are among the most promising candidates for long term accident-tolerant nuclear fuel cladding. A key challenge related to their deployment is lateral bowing caused by differential radiation-induced swelling under dose or temperature gradients, which could obstruct coolant flow or interfere with control rod/blade movements. Although previous modeling efforts have predicted bowing behavior in light-water reactor (LWR) environments, experimental validation remains limited, especially at prototypic LWR temperatures. This study addresses that gap by irradiating six reduced-length SiC/SiC cladding tubes (~600 mm) in the High Flux Isotope Reactor (HFIR) at ~300°C, which is representative of LWR conditions. The tubes will be housed in a sealed vessel with an inert gas gap to maintain target temperatures and prevent direct coolant contact. Arranged in three pairs, each set will receive a different radiation dose (low, medium, high), with the central pair receiving ~0.1 displacements per atom (dpa)—the expected dose for peak bowing. The experiment will determine the dose-dependent bowing behavior and validate predictive finite element models. In this work, the tubes are freely suspended from pins to allow for unconstrained bowing; however, we present a concept for introducing localized constraints to represent grid spacer effects. Post-irradiation examination will include swelling measurements and profilometry to assess bowing and compare the results with model predictions. This work aims to confirm the conditions under which maximum bowing occurs so as to improve the reliability of SiC/SiC performance models in nuclear applications.

Russell, Nick [ORNL] (ORCID:0000000296099820)↗