Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIRCULAR PLATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

On the mechanism of buckling of a circular cylindrical shell under axial compression

The present paper deals with the buckling of a circular cylindrical shell under axial compression from the viewpoint of energy and the characteristics of deformation. It is shown first, both theoretically and experimentally, that the reason why the buckling of a cylindrical shell is quite different from that of a flat plate is attributable to the existence of a nearly developable surface far apart from the original cylindrical surface. Based upon this result, the experimental fact that the buckling is really not general but local, that is, that the buckled region is limited axially to a range of 1.5 times the wave length of the lobe, is explained by the theoretical result that the minimum buckling load is smaller in the local buckling than in the general buckling case. The occurrence of local buckling is affirmed also from the viewpoint of the energy barrier to be jumped over during buckling, and from a comparison of the theoretical post-buckling state with the experimental results. Finally, the local buckling with the load applied by a spring is analyzed, and it is proved that the minimum buckling load increased with an increase of rigidity of the spring.

SHELLS, STRUCTURAL↗

Structural efficiencies of five compression panels with curved elements

Structural-efficiency analyses are used to determine the minimum-mass proportions of some panel configurations loaded in uniaxial compression. Five panel constructions, four of which incorporate circular-arc elements and the other a beaded-web corrugation, are shown to have improved structural efficiencies over conventional configurations. In addition to the structural-efficiency equations, which give the mass equivalent flat-plate thickness of the panel necessary to carry a given load, related design equations for calculating the cross-sectional dimensions of these minimum-mass panels are presented. The upper and lower limits of loading, where the design constraints of minimum gage or material yield strength become the dominant design conditions, are established and the corresponding design equations which are applicable outside these limits are also presented.

Giles, G. L.↗

Theoretical study of corrugated plates: Shearing of a corrugated plate with curvilinear corrugations

A theoretical elastic analysis is presented for the in-plane shear of a corrugated plate with curvilinear corrugations and with discrete attachments between the ends of the corrugations and the surrounding members. The purpose of the analysis is to obtain information about the effective shear stiffness of the plate and the flexural strains that develop in it during the shearing process as a result of the attendant cross-sectional deformations. The crests and troughs of the corrugation cross section are assumed to be identical circular arcs. The following four kinds of discrete attachment at the corrugation ends are considered in the analysis: (1) point attachments in the troughs, (2) point attachments at the crests and in the troughs, (3) point attachments at mid-height, and (4) point attachments at mid-height, at the crests, and in the troughs.

Wu, L.↗

An upwind differencing scheme for the time-accurate incompressible Navier-Stokes equations

The two-dimensional incompressible Navier-Stokes equations are solved in a time-accurate manner in using the method of pseudocompressibility. Using this method, subiterations in pseudotime are required to satisfy the continuity equation at each time step. An upwind differencing scheme based on flux-difference splitting is used to compute the convective terms. The upwind differencing is biased based on the sign of the local eigenvalue of the Jacobian matrix. Third-order or fifth-order spatial accuracy is maintained throughout the interior grid points. The equations are solved using an implicit line-relaxation scheme. This solution scheme is stable and is capable of running at large time steps in pseudotime, leading to fast convergence for each physical time step. A variety of computed results are presented to validate the present scheme. Results for the flow over an oscillating plate are compared with the exact analytic solution, good agreement is seen. Excellent comparison is obtained between the computed solution and the analytical results for inviscid channel flow with an oscillating back pressure. Flow solutions over a circular cylinder with vortex shedding are also presented. Finally, the flow past an airfoil at -90 deg angle-of-attack is also computed.

Rogers, Stuart E.↗

Tectonics and volcanism of Eastern Aphrodite Terra: No subduction, no spreading

Eastern Aphrodite Terra is approximately equal in size to the western North American Cordillera, from Mexico to Alaska. Its size and unique landforms make it an important area for understanding the tectonics of Venus, yet models for its formation are diametrically opposed. This region is part of the Equatorial Highlands, which was proposed as a region of lithospheric thinning, isostatic uplift, and attendant volcanism. Eastern Aphrodite Terra is dominated by circular structures within which deformation and volcanism are intimately related. These structures are marked by radial and concentric fractures, and volcanic flows that emanate from a central vent, as well as from concentric fracture sets. Cross-cutting relations between flows and concentric fracture sets indicate that outer concentric fracture sets are younger than inner fracture sets. The circular structures are joined by regional northeast- to east-trending fractures that dominantly postdate formation of the circular structures. We propose that the circular structures 'grow' outward with time. Although these structures probably represent addition of crust to the lithosphere, they do not represent significant lithospheric spreading or convergence, and the region does not mark the boundary between two distinct tectonic plates. This region is not easily explained by analogy with either terrestrial midocean rifts or subduction zones. It is perhaps best explained by upwelling of magma diapirs that blister the surface, but do not cause significant lithospheric spreading. Further study of the structural and volcanic evolution of this region using Magellan altimetry and SAR data should lead to better understanding of the tectonic evolution of this region.

Hansen, Vicki L.↗

Numerical thermal analyses of heat exchangers for the stirling engine application

The Regenerator, Cooler and Heater for the NASA Space Power Research Engine (SPRE) have been analyzed in detail for laminar, incompressible and oscillatory flow conditions. Each component has been analyzed independently and in detail with the regenerator being modeled as two-parallel-plates channel with a solid wall. The ends of the channel are exposed to two reservoir maintained at different temperature thus providing an axial temperature gradient along the channel. The cooler and heater components have been modeled as circular pipes with isothermal walls. Two different types of thermal boundary conditions have been investigated for the cooler and heater, namely, symmetric and asymmetric temperature inflow. In symmetric temperature inflow the flow enters the channel with the same temperature in throughout the velocity cycle whereas, in asymmetric temperature inflow the flow enters with a different temperature in each half cycle. The study was conducted over a wide range of Maximum Reynolds number (RE(max) varying from 75 to 60000, Valensi number (Va) from 2.5 to 800, and relative amplitude of fluid displacement (A(sub r) from 0.357 to 1.34. A two dimensional Finite volume method based on the SIMPLE algorithm was used to solve the governing partial differential equations. Post processing programs were developed to effectively describe the heat transfer mechanism under oscillatory flows. The computer code was validated by comparing with existing analytical solutions for oscillating flows. The thermal field have been studied with the help of temperature contour and three dimensional plots. The instantaneous friction factor, wall heat flux and heat transfer coefficient have been examined. It has been concluded that in general, the frictional factor and heat transfer coefficient are higher under oscillatory flow conditions when the Valensi number is high. Also, the thermal efficiency decreases for lower A(r) values. Further, the usual steady state definition for the heat transfer coefficient does not seem to be valid.

Kannapareddy, Mohan Raj↗

Large arcuate scars: A geological legacy of the Earth's accretionary past

Immediately following accretion, the surface of the Earth was densely patterned with circular scars which were the surface expressions of 3-D craterform structures. In the course of geological time these structures would have become less and less visible due to the workings of the Earth's atmosphere, surface waters, and plate tectonics regime but there is no compelling reason to assume that they have been entirely eradicated. Furthermore, a very imperfect analogy with the other inner planets suggests that geological processes may not in fact be capable of totally erasing such deep features. Some illustrative examples of arcuate scars are discussed.

Saul, J. M.↗

State-resolved ultrafast charge and spin dynamics in [Co/Pd] multilayers

We use transient absorption spectroscopy with circularly polarized x rays to detect laser-excited hole states below the Fermi level and compare their dynamics with that of unoccupied states above the Fermi level in ferromagnetic [Co/Pd] multilayers. While below the Fermi level, an instantaneous and significantly stronger demagnetization is observed, above the Fermi level, the demagnetization is delayed by 35 ± 10 fs. This provides a direct visualization of how ultrafast demagnetization proceeds via initial spin-flip scattering of laser-excited holes to the subsequent formation of spin waves.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Film and interstitial formation of metals in plasma-sprayed ceramics

A method is described to electrodeposit noble metals such as platinum and ordinary metals such as copper on and within plasma-sprayed ceramic materials and ceramic fiber materials. Low-density ceramic fiber bodies were vacuum impregnated with plating solution and attached to an electrode. Light micrographs illustrating the density and location of deposited materials are presented and discussed. Voids in the plasma-sprayed ceramic were filled with deposits that vary from spherical to lens-shaped circular and have particle size corresponding to the full range of void size. Multiple coatings of ceramic and metal can be sequenced.

Hendricks, R. C.↗

Film and interstitial formation of metals in plasma-sprayed ceramics

A method is described to electrodeposit noble metals such as platinum and ordinary metals such as copper on and within plasma-sprayed ceramic materials and ceramic fiber materials. Low-density ceramic fiber bodies were vacuum impregnated with plating solution and attached to an electrode. Light micrographs illustrating the density and location of deposited materials are presented and discussed. Voids in the plasma-sprayed ceramic were filled with deposits that vary from spherical to lens-shaped circular and have particle size corresponding to the full range of void size. Multiple coatings of ceramic and metal can be sequenced.

Hendricks, R. C.↗

The effect of laser spot shapes on polar-direct-drive implosions on the National Ignition Facility

Ongoing polar-direct-drive (PDD) implosions on the National Ignition Facility (NIF) [J. D. Lindl and E. I. Moses, Phys. Plasmas 18, 050901 (2011)] use existing NIF hardware, including indirect-drive phase plates. This limits the performance achievable in these implosions. Spot shapes are identified that significantly improve the uniformity of PDD NIF implosions; outer surface deviation is reduced by a factor of 7 at the end of the laser pulse and hot-spot distortion is reduced by a factor of 2 when the shell has converged by a factor of ∼10. As a result, the neutron yield increases by approximately a factor of 2. This set of laser spot shapes is a combination of circular and elliptical spots, along with elliptical spot shapes modulated by an additional higher-intensity ellipse offset from the center of the beam. This combination is motivated in this paper. It is also found that this improved implosion uniformity is obtained independent of the heat conduction model. This work indicates that significant improvement in performance can be obtained robustly with the proposed spot shapes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

LDEF attitude measurement using a pinhole camera with a silver/oxygen atom detector

A small device designed to measure the orbital attitude stability of the Long Duration Exposure Facility (LDEF) spacecraft is examined. The device used the reaction of Ag with O atoms, which convert the metal to a nonconducting black appearing oxide with high efficiency. The atmosphere at LDEF altitudes consists of more than 90 pct. atomic O. The device is a small hemispheric Ag surface facing a pinhole in a metal plate on the front surface of the satellite. It was expected that the stream of O atoms, travelling at a relatively velocity of 8 km/s would pass through the pinhole and strike the Ag surface at the geometric center, producing a circular black spot. In fact, the position of the spot has clearly shown that the LDEF was rotated by 8.0 + or - 0.4 deg from its nominal attitude, but that it was remarkably stable about this offset. The ellipticity of the recorded spot was attributed to a yaw oscillation of + or - 0.2 deg, however it was previously noted, that the co-rotation of the Earth's atmosphere should produce a sweeping of the atom beam vector of ca. + or - 1.5 deg about the surface normal. Such an effect was not visible in this experiment.

Gregory, John C.↗

Supercritical flow about a thick circular-arc airfoil

The supercritical flow about a biconvex circular-arc airfoil is being thoroughly documented at Ames Research Center in order to provide experimental test cases suitable for guiding and evaluating current and future computer codes. The effects of angle of attack, effects of leading and trailing-edge splitter plates, additional unsteady pressure fluctuation (buffeting) measurements and glow-field shadowgraphs, and application of an oil-film technique to display separated-wake streamlines were studied. Computed and measured pressure distributions for steady and unsteady flows, using a recent computer code representative of current methodology, are compared. It was found that the numerical solutions are often fundamentally incorrect in that only strong (shock-polar terminology) shocks are captured, whereas experimentally, both strong and weak shock waves appear.

Mcdevitt, J. B.↗

Computation of Static Shapes and Voltages for Micromachined Deformable Mirrors with Nonlinear Electrostatic Actuators

In modeling micromachined deformable mirrors with electrostatic actuators whose gap spacings are of the same order of magnitude as those of the surface deformations, it is necessary to use nonlinear models for the actuators. In this paper, we consider micromachined deformable mirrors modeled by a membrane or plate equation with nonlinear electrostatic actuator characteristics. Numerical methods for computing the mirror deformation due to given actuator voltages and the actuator voltages required for producing the desired deformations at the actuator locations are presented. The application of the proposed methods to circular deformable mirrors whose surfaces are modeled by elastic membranes is discussed in detail. Numerical results are obtained for a typical circular micromachined mirror with electrostatic actuators.

Wang, P. K. C.↗

Turbulent wall jet in a coflowing stream

A theoretical investigation was undertaken to develop a relatively simple model of a two-dimensional, turbulent wall jet in a coflowing stream. The incompressible jet flow was modeled by using an integral method which includes turbulent shear stress, entrainment, and heat transfer. The method solves the conservation equations for the average jet flow properties and uses the velocity profile suggested by Escudier and Nicoll to obtain detailed characteristics of the jet on a flat plate. The analytical results compare favorably with experimental data for a range of injection velocities, which demonstrates the usefulness of the theory for estimating jet growth, velocity decay, and wall skin friction. The theory, which was applied to a Coanda jet on a circular cylinder, provided estimates of suction pressures aft of the jet exit that were in close agreement with experimental values.

Campbell, J. F.↗

Study of abrasive wear rate of silicon using n-alcohols

The work carried out at the University of Illinois at Chicago for the Flat-Plate Solar Array Project under contract No. 956053 is summarized. The abrasion wear rate of silicon in a number of fluid environments and the parameters that influence the surface mechanical properties of silicon were determined. Three tests were carried out in this study: circular and linear multiple-scratch test, microhardness test and a three-point bend test. The pertinent parameters such as effect of surface orientation, dopant and fluid properties were sorted. A brief review and critique of previous work is presented.

Danyluk, S.↗

Performance studies on solar collector with grooved absorber tube configuration using aqueous ZnO–ethylene glycol nanofluids

Solar flat plate collector (SFPC) is regarded as one of the best renewable energy devices to acquire hot water for domestic usage. Though its theoretical efficiency is projected at higher scale, its conversion efficiency is observed to be low due to various collector losses. Hence, to achieve improved performance of collector different techniques for heat transfer augmentation in circular pipes can be adopted. Among passive and active techniques available, passive is preferred over active due to economics and saving in exergy. Hence, in the present study absorber tube configuration is modified with internal grooves in the collector setup to enhance the rate of heat transfer. Also, fluids dispersed with metal oxide particles provide an increase in thermal conductivity such that ZnO-based aqueous EG mixture nanofluid is used as working medium to analyze the performance of collector setup. Also, the change in heat transfer rate and temperature profile of grooved tubes under forced laminar conditions for different working fluids are compared and reported.

14 SOLAR ENERGY↗