Carbon Chlorine Bond Scission in Li-Doped Single-Walled Carbon Nanotubes: Reaction of CH3Cl and Lithium
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Tungsten diselenide (WSe 2 ) is a promising p-type semiconductor limited by high contact resistance (R C ) and the lack of a reliable doping strategy. Here, we demonstrate that exposing WSe 2 to chloroform provides simple and stable p-type doping. In monolayer WSe 2 transistors with Pd contacts, chloroform increases the maximum hole current by over 100× (>200 µA/µm), reduces R C to ~ 2.5 kΩ·μm, and retains an on/off ratio of 10 10 at room temperature. These improvements persist for over 8 months, survive a 150 °C thermal anneal, and remain effective down to 10 K, enabling a cryogenic R C of ~ 1 kΩ·μm. Density functional theory indicates that chloroform strongly physisorbs to WSe 2 , inducing hole doping with minimal impact on the electronic states between the valence band and conduction band edges. Auger electron spectroscopy and atomic force microscopy suggest that chloroform intercalates at the WSe 2 interface with the gate oxide, contributing to doping stability and mitigating interfacial dielectric disorder, though further studies are needed to conclusively confirm this mechanism. This robust, scalable approach enables high-yield WSe 2 transistors with good p-type performance.
Explore the source record for details and available documents.
Not provided.
Abstract The efficient methylation of a panel of five industrial and environmentally-relevant chlorophenols (CPs) employing trimethyloxonium tetrafluoroborate (TMO) for their qualitative detection and identification by electron impact gas chromatography–mass spectrometry (EI-GC–MS) is presented. The protocol’s execution is simple and smoothly converts the phenols into their O-methylated counterparts conveniently at ambient temperature. The efficiency of two versions of the protocol was successfully tested in their ability to simultaneously derivatize five CPs (2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, pentachlorophenol and triclosan) in six distinct, separate soil matrices (Nebraska EPA standard soil, Virginia Type A soil, Ottawa sand, Baker sand, Silt and Georgia EPA standard soil) when present at low levels (~ 10 μgg −1 ). The first version involves the direct derivatization of the spiked soils with the methylating salt while the second one involves an initial soil extraction step of the CPs followed by methylation. The MDL values for each methylated CP were determined and lower values were found (4.1–13.2 ng . mL −1 ) for both sand matrices (Ottawa and Baker) as well as for the Georgia EPA standard soil, while larger values (8.2–21.8 ng . mL −1 ) were found for the Virginia Type soil, Nebraska EPA standard soil and Silt. The presented protocol offers a safer and more practical alternative to the universally employed diazomethane method and can be readily applicable to matrices other than soils. Furthermore, the protocols described herein may find applicability to the methylation of other analytes bearing acidic protons.
X-ray Transient Absorption Spectroscopy (XTAS) is a powerful probe for ultrafast molecular dynamics. The evolution of XTAS signal is controlled by the shapes of potential energy surfaces of the associated core-excited states, which are difficult to directly measure. Here, we study the vibrational dynamics of Raman activated CCl 4 with XTAS targeting the C 1s and Cl 2p electrons. The totally symmetric stretching mode leads to concerted elongation or contraction in bond lengths, which in turn induce an experimentally measurable red or blue shift in the X-ray absorption energies associated with inner-shell electron excitations to the valence antibonding levels. The ratios between slopes of different core-excited potential energy surfaces (CEPESs) thereby extracted agree very well with Restricted Open-Shell Kohn-Sham calculations. The other, asymmetric, modes do not measurably contribute to the XTAS signal. The results highlight the ability of XTAS to reveal coherent nuclear dynamics involving < 0.01 Å atomic displacements and also provide direct measurement of forces on CEPESs.
Explore the source record for details and available documents.
The initial oxidation products of methyl butyrate (MB) and ethyl butyrate (EB) are studied using a time- and energy-resolved photoionization mass spectrometer. Reactions are initiated with Cl˙ radicals in an excess of oxygen at a temperature of 550 K and a pressure of 6 Torr. Ethyl crotonate is the sole isomeric product that is observed from concerted HO 2 -elimination from initial alkylperoxy radicals formed in the oxidation of EB. Analysis of the potential energy surface of each possible alkylperoxy radical shows that the CH 3 CH(OO)CH 2 C=O)OCH 2 CH 3 (RγO 2 ) and CH 3 CH 2 CH(OO)C(=O)OCH 2 CH 3 (R β O 2 ) radicals are the isomers that could undergo this concerted HO 2 -elimination. Two lower-mass products (formaldehyde and acetaldehyde) are observed in both methyl and ethyl butyrate reactions. Secondary reactions of alkylperoxy radicals with HO 2 radicals can decompose into the aforementioned products and smaller radicals. As a result, these pathways are the likely explanation for the formation of formaldehyde and acetaldehyde.
Atomic layer deposition of TiO 2 may be used to tune the catalytic activity of three metal oxide catalysts for two reactions.
We examined the reactive uptake of dinitrogen pentoxide (N2O5) to authentic biomass-burning aerosol (BBA) using a small chamber reservoir in combination with an entrained aerosol flow tube. BBA was generated from four different fuel types and the reactivity of N2O5 was probed from 30 to 70% relative humidity (RH). The N2O5 reactive uptake coefficient, ?(N2O5), depended upon RH, fuel type, and to a lesser degree on aerosol chloride mass fractions. The ?(N2O5) ranged from 2.0 (±0.4) x10-3 on black needlerush derived BBA at 30% RH to 6.0 (±0.6) x10-3 on wiregrass derived BBA at 65% RH. Major N2O5 reaction products were observed including gaseous ClNO2 and HNO3 and particulate nitrate, and used to create a reactive nitrogen budget. Black needlerush BBA had the most particulate chloride, and the only measured ClNO2 yield > 1%. The ClNO2 yield on black needlerush decayed from an initial value of ~100% to ~ 30% over the course of the burn experiment, suggesting a depletion of BBA chloride over time. Black needlerush was also the only fuel for which the reactive nitrogen budget indicated other N-containing products were generated. Generally, the results suggest limited chloride availability for heterogeneous reaction for BBA in the RH range probed here, including BBA with chloride mass fractions on the higher end of reported values (~17-34%)(1,2). though less than sea spray aerosol, ~50%(3). We use these measured quantities to discuss the implications for nocturnal aerosol nitrate formation, the chemical fate of N2O5 (g), and the availability of particulate chloride for activation in biomass burning plumes.
Here, the effects of halogen (F, Cl, Br, I, and At) doping in the direct-band-gap β-Fe 2 O 3 semiconductor on its band structures and electron–hole recombination have been investigated by density functional theory. Doping Br, I, and At in β-Fe 2 O 3 leads to transformation from a direct-band-gap semiconductor to an indirect-band-gap semiconductor because their atomic radii are too large; however, F- and Cl-doped β-Fe 2 O 3 remain as direct-band-gap semiconductors. Due to the deep impurity states of the F dopant, this study focuses on the effects of the Cl dopant on the band structures of β-Fe 2 O 3 . Two impurity levels are introduced when Cl is doped into β-Fe 2 O 3 , which narrows the band gap by approximately 0.3 eV. After doping Cl, the light-absorption edge of β-Fe 2 O 3 redshifts from 650 to 776 nm, indicating that its theoretical solar to hydrogen efficiency for solar water splitting increases from 20.6% to 31.4%. In addition, the effective mass of the holes in halogen-doped β-Fe 2 O 3 becomes significantly larger than that in undoped β-Fe 2 O 3 , which may suppress electron–hole recombination.
Dynamics of CCl 4 + prepared by 800 nm strong-field ionization, as studied with X-ray transient absorption spectroscopy (XTAS) and quantum chemical calculations.
Neutron-induced reactions on 35Cl have recently been measured and analyzed in a Hauser-Feshbach framework at Los Alamos National Laboratory. Particular focus has been applied to the “fast” energy range above 100 keV, where these reactions become important for applications like CLYC (Cs 2 LiYCl 6 :Ce) detector characterization and the development of molten chloride fast reactors. However, challenges to applying a purely statistical analysis to this mass range have presented themselves in the form of cross section fluctuations and deviations due to low-mass structure. In this paper, these challenges and their current solutions will be highlighted, as well as preliminary extensions of the analysis to neighboring isotopes and future plans to extend the measurements down to thermal energies.
CdTe-based solar cell efficiency has rapidly improved over the last few years. Some of the reasons have been a change to the absorber composition including the incorporation of selenium, and better front contact and emitter materials in CdTe photovoltaic devices. In addition to the increase in short-circuit current by reducing the bandgap, Se plays other important roles in passivation of defects thus improving the conversion efficiency of CdSeTe/CdTe graded absorber photovoltaic devices. Here, we combine structural and optical characterizations with first principles calculations to investigate the role of Se and Cl segregation in CdSeTe devices. We find that in the presence of Se and Cl, the minority carrier lifetime improves due to a reduction of midgap defect states. Here, we also correlate this effect with defect passivation in CdSeTe devices and suggest innovative ways to further improve CdTe-based photovoltaic efficiency.
Not Available
Not Available
Not Available