Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Band structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Present growth technology of silicon germanium alloys and possible advantages of microgravity growth

The growth technology of Silicon-germanium (Si-Ge) alloys and the possible advantages of growth in microgravity is reviewed. The Si-Ge alloys have a continuous variation of bandgap energy from the germanium bandgap to the silicon bandgap. The unusual two slope behavior of Eg versus composition is due to the differences in the conduction band structure between Si and Ge. Below 17% (atomic), the germanium band structure dominates; and above it, the bands are "silicon like". It is found that the growth of Si-Ge alloys in microgravity is very attractive. In particular, the float zone method, in which a liquid zone of controlled starting composition, used to grow a large amount of useful alloy crystal. Large temperature gradients and relatively flat growth interfaces are necessary to obtain homogeneous crystal growth.

Stafsudd, O. M.↗

Altermagnetic Band Splitting in 10 nm Epitaxial CrSb Thin Films

Altermagnets are a newly identified family of collinear antiferromagnets with a momentum-dependent spin-split band structure of non-relativistic origin, derived from spin-group symmetry-protected crystal structures. Among candidate altermagnets, CrSb is attractive for potential applications because of a large spin-splitting near the Fermi level and a high Néel transition temperature of around 700 K. Molecular beam epitaxy is used to synthesize CrSb (0001) thin films with thicknesses ranging from 10 to 100 nm. Structural characterization, using reflection high energy electron diffraction, scanning transmission electron microscopy, and X-ray diffraction, demonstrates the growth of epitaxial films with good crystallinity. Polarized neutron reflectometry shows the absence of any net magnetization, consistent with antiferromagnetic order. In vacuo angle resolved photoemission spectroscopy (ARPES) measurements probe the band structure in a previously unexplored regime of film thickness, down to 10 nm. These ARPES measurements show a bulk-type, 3D momentum-dependent band splitting of up to 0.7 eV with g-wave symmetry, consistent with that seen in prior studies of bulk single crystals. The distinct altermagnetic band structure required for potential spin-transport applications survives down to the ∼10 nm thin film limit at room temperature.

Santhosh, Sandra↗

Revealing the electronic structure of van der Waals antiferromagnetic NiPS 3 through synchrotron-based 𝜇-ARPES and alkali metal dosing

Antiferromagnetic NiPS 3 has recently emerged as a quantum material of considerable interest, thanks to the discovery of multiple new couplings involving electrons, spins, orbitals, phonons, and magnons. However, controversies and open questions persist concerning the fundamental origins of these couplings. A critical piece of information required to advance the understanding is the precise electronic band structure of NiPS 3 . Angle-resolved photoemission spectroscopy (ARPES), combined with alkali metal dosing (AMD), can enable us to directly observe the subtle electronic states that appear around the Fermi surface, offering valuable insights into the intriguing quantum properties and interplays of the examined material. Here, in this study, we present a comprehensive characterization and analysis of the band structure of van der Waals layered antiferromagnet NiPS 3 , leveraging state-of-the-art μ-ARPES measurements supported by density functional theory (DFT) calculations. Theoretical DFT results identify the orbital contributions to the observed bands, providing a precise understanding of the experimental ARPES data. Crucially, AMD enables the observation of conduction band and defect-related states above the valence band maximum in NiPS 3 . Furthermore, temperature dependent ARPES results across the Néel transition temperature of NiPS 3 reveal that the paramagnetic and antiferromagnetic phases have nearly identical band structures, underlining the highly localized character of Ni d states. These findings substantially deepen our understanding of the electronic properties of NiPS 3 and lay a vital foundation for exploring the intriguing quantum phenomena it exhibits.

Cao, Yifeng [Boston Univ., MA (United States); Law↗

Quasiparticle self-consistent $GW$ energy band calculations for $\mathrm{Ge_3N_4}$ phases

Quasiparticle self-consistent GW (G Green's function, W screened Coulomb interaction) band structure calculations are presented for the α, β, and γ phases of Ge 3 N 4 . The GW corrections to the gap are substantial and the gaps are found to be 3.85, 3.86, and 3.56 eV for α, β, γ respectively, at the experimental lattice constants. Only the β phase has a direct gap. The α and β phases, which are closely related to each other in crystal structure, are consequently also found to have rather similar band structures. Nonetheless, some significant differences are found near the valence band maximum, which are related to the different interlayer interactions in the c direction. In the cubic spinel phase, the conduction band minima of s and p character are found close to each other. Effective masses are calculated for the relevant valence and conduction band edges and for the cubic case analyzed in terms of the Kohn-Luttinger effective Hamiltonian. Finally, the optical response functions from direct interband transitions are calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monte Carlo Simulation of Electron Thermalization in Scintillator Materials: Implications for Scintillator Nonproportionality

The lack of reliable quantitative estimates of the length and time scales associated with hot electron thermalization after a gamma-ray induced energy cascade obscures the interplay of various microscopic processes controlling scintillator performance and hampers the search for improved detector materials. We apply a detailed microscopic kinetic Monte Carlo model of the creation and subsequent thermalization of hot electrons produced by gamma irradiation of six important scintillating crystals to determine the spatial extent of the cloud of excitations produced by gamma rays and the time required for the cloud to thermalize with the host lattice. The main ingredients of the model are ensembles of microscopic track structures produced upon gamma excitation (including the energy distribution of the excited carriers), numerical estimates of electron-phonon scattering rates, and a calculated particle dispersion to relate the speed and energy of excited carriers. All these ingredients are based on first-principles density functional theory calculations of the electronic and phonon band structures of the materials. Details of the Monte Carlo model are presented along with results for thermalization time and distance distributions. These results are discussed in light of previous work. It is found that among the studied materials, calculated thermalization distances are positively correlated with measured nonproportionality. In the important class of halide scintillators, the particle dispersion is found to be more influential than the largest phonon energy in determining the thermalization distance.

Phonons, radiation detection, scintillators, thema↗

Effects of anisotropy and disorder on the superconducting properties of niobium

We report results for the superconducting transition temperature and anisotropic energy gap for pure niobium based on Eliashberg’s equations and electron and phonon band structures computed from density functional theory. The electronic band structure is used to construct the Fermi surface and calculate the Fermi velocity at each point on the Fermi surface. The phonon bands are in excellent agreement with inelastic neutron scattering data. The corresponding phonon density of states and electron–phonon coupling define the electron–phonon spectral function, α 2 F(p, p'; ω), and the corresponding electron–phonon pairing interaction, which is the basis for computing the superconducting properties. The electron–phonon spectral function is in good agreement with existing tunneling spectroscopy data except for the spectral weight of the longitudinal phonon peak at ℏω LO = 23 meV. We obtain an electron–phonon coupling constant of λ = 1.057, renormalized Coulomb interaction μ* = 0.218, and transition temperature T c = 9.33 K. The corresponding strong-coupling gap at T = 0 is modestly enhanced, Δ 0 = 1.55 meV, compared to the weak-coupling BCS value $Δ^{\text {wc}}_{0}$ = 1.78 k B T c = 1.43 meV. The superconducting gap function exhibits substantial anisotropy on the Fermi surface. We analyze the distribution of gap anisotropy and compute the suppression of the superconducting transition temperature using a self-consistent T-matrix theory for quasiparticle-impurity scattering to describe niobium doped with non-magnetic impurities. We compare these results with experimental results on niobium SRF cavities doped with nitrogen impurities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Doping of Semiconducting Atomic Chains

Due to the rapid progress in atom manipulation technology, atomic chain electronics would not be a dream, where foreign atoms are placed on a substrate to form a chain, and its electronic properties are designed by controlling the lattice constant d. It has been shown theoretically that a Si atomic chain is metallic regardless of d and that a Mg atomic chain is semiconducting or insulating with a band gap modified with d. For electronic applications, it is essential to establish a method to dope a semiconducting chain, which is to control the Fermi energy position without altering the original band structure. If we replace some of the chain atoms with dopant atoms randomly, the electrons will see random potential along the chain and will be localized strongly in space (Anderson localization). However, if we replace periodically, although the electrons can spread over the chain, there will generally appear new bands and band gaps reflecting the new periodicity of dopant atoms. This will change the original band structure significantly. In order to overcome this dilemma, we may place a dopant atom beside the chain at every N lattice periods (N > 1). Because of the periodic arrangement of dopant atoms, we can avoid the unwanted Anderson localization. Moreover, since the dopant atoms do not constitute the chain, the overlap interaction between them is minimized, and the band structure modification can be made smallest. Some tight-binding results will be discussed to demonstrate the present idea.

Toshishige, Yamada↗

Virtual node graph neural network for full phonon prediction

Understanding the structure-property relationship is crucial for designing materials with desired properties. The past few years have witnessed remarkable progress in machine-learning methods for this connection. However, substantial challenges remain, including the generalizability of models and prediction of properties with materials-dependent output dimensions. Here we present the virtual node graph neural network to address the challenges. By developing three virtual node approaches, we achieve Γ-phonon spectra and full phonon dispersion prediction from atomic coordinates. We show that, compared with the machine-learning interatomic potentials, our approach achieves orders-of-magnitude-higher efficiency with comparable to better accuracy. This allows us to generate databases for Γ-phonon containing over 146,000 materials and phonon band structures of zeolites. Additionally, our work provides an avenue for rapid and high-quality prediction of phonon band structures enabling materials design with desired phonon properties. The virtual node method also provides a generic method for machine-learning design with a high level of flexibility. In this study, the authors present a virtual node graph neural network to enable the prediction of material properties with variable output dimensions. This method offers fast and accurate predictions of phonon band structures in complex solids.

36 MATERIALS SCIENCE↗

More realistic band gaps from meta-generalized gradient approximations: Only in a generalized Kohn-Sham scheme

Unlike the local density approximation (LDA) and the generalized gradient approximation (GGA), calculations with meta-generalized gradient approximations (meta-GGA) are usually done according to the generalized Kohn-Sham (gKS) formalism. The exchange-correlation potential of the gKS equation is nonmultiplicative, which prevents systematic comparison of meta-GGA band structures to those of the LDA and the GGA. We implement the optimized effective potential (OEP) of the meta-GGA for periodic systems, which allows us to carry out meta-GGA calculations in the same KS manner as for the LDA and the GGA. We apply the OEP to several meta-GGAs, including the new SCAN functional [Phys. Rev. Lett. 115, 036402 (2015)]. Here, we find that the KS gaps and KS band structures of meta-GGAs are close to those of GGAs. They are smaller than the more realistic gKS gaps of meta-GGAs, but probably close to the less-realistic gaps in the band structure of the exact KS potential, as can be seen by comparing with the gaps of the EXX+RPA OEP potential. The well-known grid sensitivity of meta-GGAs is much more severe in OEP calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and Computational Investigation of Lanthanide Ion Doping on BiVO 4 Photoanodes for Solar Water Splitting

N-type bismuth vanadate (BiVO4) has emerged as one of the most promising photoanodes for use in water-splitting photoelectrochemical cells in recent years. However, its photoelectrochemical properties may be further enhanced by optimizing its band gap and its charge-transport properties. Doping at the V5+ and O2- sites of BiVO4 has proven to be an effective strategy to alter the oxide electronic band structure and/or charge-transport properties, but the effect of doping at the Bi3+ site is not nearly as well understood. In this study, we performed a combined experimental and theoretical study of BiVO4 doped with lanthanide (Ln) elements (La, Ce, Sm, and Yb) at the Bi3+ site, and we elucidated the effect of doping on the electronic band structure and charge-transport properties of BiVO4. Furthermore, we performed density functional theory calculations to investigate the combined effect of the Ln doping and oxygen vacancies, which are intrinsic defects in BiVO4. Our results showed that for some cases, the simultaneous consideration of Ln doping and O vacancy leads to changes that cannot be obtained by the sum of the changes caused by Ln doping alone and O vacancy alone, which was critical for understanding the experimental results. The various ways that the Ln dopants modified the electronic band structure and charge-transport properties of BiVO4 demonstrated in this study can provide useful guidelines for the tuning of the composition of oxide-based photoelectrodes.

Govindaraju, Gokul V.↗

The new barium zinc mercurides Ba{sub 3}ZnHg{sub 10} and BaZn{sub 0.6}Hg{sub 3.4} - Synthesis, crystal and electronic structure

The title compounds Ba{sub 3}ZnHg{sub 10} and BaZn{sub 0.6}Hg{sub 3.4} were synthesized from stoichiometric ratios of the elements in Ta crucibles. Their crystal structures, which both represent new structure types, have been determined using single crystal X-ray data. The structure of Ba{sub 3}ZnHg{sub 10} (orthorhombic, oP28, space group Pmmn, a=701.2(3), b=1706.9(8), c=627.3(3)pm, Z=2, R1=0.0657) contains folded 4{sup 4} Hg nets, where the meshes form the bases of flat rectangular pyramids resembling the structure of BaAl{sub 4}. The flat pyramids are connected via Hg-Zn/Hg bonds, leaving large channels at the folds, in which Ba(1) and Hg(2) atoms alternate. Whereas the remaining Hg/Zn atoms form a covalent 3D network of three- to five-bonded atoms with short M-M distances (273-301 pm; CN 9-11), the Hg(2) atoms in the channels adopt a comparatively large coordination number of 12 and increased distances (317-348 pm) to their Zn/Hg neighbours. In the structure of BaZn{sub 0.6}Hg{sub 3.4} (cubic, cI320, space group I4{sup Macron }3d, a=2025.50(7) pm, Z=64, R1=0.0440), with a chemical composition not much different from that of Ba{sub 3}ZnHg{sub 10}, the Zn/Hg atoms of the mixed positions M(1/2) are arranged in an slightly distorted primitive cubic lattice with a 4 Multiplication-Sign 4 Multiplication-Sign 4 subcell relation to the unit cell. The 24 of the originating 64 cubes contain planar cis tetramers Hg(5,6){sub 4} with Hg in a nearly trigonal planar or tetrahedral coordination. In another 24 of the small cubes, two opposing faces are decorated by Hg(3,4){sub 2} dumbbells, two by Ba(2) atoms respectively. The third type of small cubes are centered by Ba(1) atoms only. The complex 3D polyanionic Hg/Zn network thus formed is compared with the Hg partial structure in Rb{sub 3}Hg{sub 20} applying a group-subgroup relation. Despite their different overall structures, the connectivity of the negatively charged Hg atoms, the rather metallic Zn bonding characteristic (as obtained from FP-LAPW band structure calculations) and the coordination number of 16 for all Ba cations relate the two title compounds. - Graphical abstract: Six of the 64 small sub-cubes of three types (A, B, C) forming the unit cell of the Hg-rich mercuride BaZn{sub 0.6}Hg{sub 3.4}. Highlights: Black-Right-Pointing-Pointer Two new Hg-rich Ba mercurides, both synthesized from the elements in pure phase. Black-Right-Pointing-Pointer BaZn{sub 0.6}HgG{sub 3.4} and Ba{sub 3}ZnHg{sub 10} with new complex structure types. Black-Right-Pointing-Pointer Structure relation to other complex cubic intermetallics. Black-Right-Pointing-Pointer Discussion of covalent and metallic bonding aspects, as found by the structure features and band structure calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PyProcar: A Python library for electronic structure pre/post-processing

The PyProcar Python package plots the band structure and the Fermi surface as a function of site and/or s,p,d,f - projected wavefunctions obtained for each k-point in the Brillouin zone and band in an electronic structure calculation. This can be performed on top of any electronic structure code, as long as the band and projection information is written in the PROCAR format, as done by the VASP and ABINIT codes. PyProcar can be easily modified to read other formats as well. This package is particularly suitable for understanding atomic effects into the band structure, Fermi surface, spin texture, etc. PyProcar can be conveniently used in a command line mode, where each one of the parameters define a plot property. In the case of Fermi surfaces, the package is able to plot the surface with colors depending on other properties such as the electron velocity or spin projection. Furthermore, the mesh used to calculate the property does not need to be the same as the one used to obtain the Fermi surface. A file with a specific property evaluated for each k-point in a k-mesh and for each band can be used to project other properties such as electron–phonon mean path, Fermi velocity, electron effective mass, etc. Another existing feature refers to the band unfolding of supercell calculations into predefined unit cells.

97 MATHEMATICS AND COMPUTING↗

Generating Bright Emissive States by Modulating the Bandgap of Monolayer Tungsten Diselenide

Transition metal dichalcogenides (TMDs) are essential due to their fascinating electronic and optical properties, strong exciton binding energy, and layer-dependent bandgap. They can be tuned to function as a single-photon emitter, but the quantum yield of photoluminescence of single-layer WSe 2 is low. There is some evidence that a bright emissive state can be produced by introducing local defects through functionalization. In this paper we use spin-polarized periodic density functional theory (DFT) to study the effect of functionalization for the specific case of cyclic carbenes. We find that the simplest of these molecules, cyclopentadiene carbene (Cyc), binds to the surface by a covalent bond leading to a substantial change in the bandgap (1.24 eV compared to 1.64 eV for the pristine surface). Moreover, there are semiflat bands below the Fermi level that originate from σ bonding and the interaction between the lone-pair p orbitals on the carbon of Cyc that bonds with Se on the TMD. Cyc is found to form a Type IIa heterojunction before and after contact with the surface, where the “a” refers to ordering of the energy levels where the TMD levels have the larger splitting and “b” to the reverse. The effect of various electron-withdrawing and electron-donating groups on Cyc is investigated, and it is found that the direct bandgap and heterointerfaces can be chemically tuned with covalently bound functional groups. With an electron-withdrawing group (EWG) such as –CHO, –COCl, and –CN attached to Cyc, a Type III//Type IIa interface is formed, whereas all other EWGs used in this study form a Type IIa junction, before and after contact to the surface. The electron-donating groups (EDG) form Type Ib//Type Ia junctions, and in particular, we find that the system WSe 2 + Cyc-Me band structure consists of semiflat bands at valence band maxima localized on Cyc-Me and the conduction band minimum is coupled between the surface and functional group with a direct bandgap of 0.88 eV. Hence, we predict that the Cyc-Me-functionalized monolayer WSe 2 will produce a red-shifted bright emissive state. Furthermore, we also find that carbenes with the Cyc all-carbon ring have (1) a triplet ground state and (2) form covalent bonds to WSe 2 , while heterocyclic carbenes (1) have a singlet ground state and (2) do not form covalent bonds to WSe 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Floquet Engineering of Gapped 2D Materials

It is demonstrated theoretically that the interaction of gapped 2D materials (gapped graphene and transition metal dichalchogenide monolayers) with a strong high-frequency electromagnetic field (dressing field) crucially changes the band structure of the materials. As a consequence, the renormalized band structure of the materials drastically depends on the field polarization. Particularly, a linearly polarized dressing field always decreases band gaps, whereas a circularly polarized field breaks the equivalence of band valleys in different points of the Brillouin zone and can both increase and decrease corresponding band gaps. It is shown also that a dressing field can turn both the band gaps and the spin splitting of the bands into zero. As a result, the dressing field can serve as an effective tool to control spin and valley properties of the materials in various optoelectronic applications.

36 MATERIALS SCIENCE↗

Identifying Band Inversions in Topological Materials Using Diffusion Monte Carlo

Topological insulators are characterized by insulating bulk states and robust metallic surface states. Band inversion is a hallmark of topological insulators. At time-reversal invariant points in the Brillouin zone, spin–orbit coupling (SOC) induces a swapping of orbital character at the bulk band edges. Reliably detecting band inversion in solid-state systems with many-body methods would aid in identifying possible candidates for spintronics and quantum computing applications and improve our understanding of the physics behind topologically nontrivial systems. Density functional theory (DFT) methods are a well-established means of investigating these interesting materials due to their favorable balance of computational cost and accuracy but often struggle to accurately model the electron–electron correlations present in the many materials containing heavier elements. In this work, we develop a novel method to detect band inversion within continuum quantum Monte Carlo (QMC) methods that can accurately treat the electron correlation and spin–orbit coupling that are crucial to the physics of topological insulators. Our approach applies a momentum-space-resolved atomic population analysis throughout the first Brillouin zone utilizing the Löwdin method and the one-body reduced density matrix produced with diffusion Monte Carlo (DMC). We integrate this method into QMCPACK, an open source ab initio QMC package, so that these ground-state methods can be used to complement experimental studies and validate prior DFT work on predicting the band structures of correlated topological insulators. Here, we demonstrate this new technique on the topological insulator bismuth telluride, which displays band inversion between its Bi-p and Te-p states at the Γ-point. We show an increase in charge on the bismuth-p orbital and a decrease in charge on the tellurium-p orbital when comparing band structures with and without SOC. Additionally, we use our method to compare the degree of band inversion present in monolayer Bi 2 Te 3 , which has no interlayer van der Waals interactions, to that seen in the bilayer and bulk. The method presented here will enable future many-body studies of band inversion that can shed light on the delicate interplay between correlation and topology in correlated topological materials.

Band structure↗

Camel-back band-induced power factor enhancement of thermoelectric lead-tellurium from Boltzmann transport calculations

Band structures of PbTe can be abnormally bended via dual-doping on both the cationic and anionic sites to form camel-back multivalley energy band structures near the band edge. As a result, additional carrier pockets and strong intervalley scattering of carriers are introduced. Boltzmann transport calculations indicate that their contradictory effects yield remarkably enhanced power factor due to the improved thermopower and almost unchanged electrical conductivity in low temperature and high carrier concentration ranges. These findings prove dual-doping-induced band bending as an effective approach to improve the thermoelectric properties of PbTe and other similar materials.

36 MATERIALS SCIENCE↗

First principle investigation of electronic structure, chemical bonding and optical properties of tetrabarium gallium trinitride oxide single crystal

The electronic band structure, valence electron charge density and optical susceptibilities of tetrabarium gallium trinitride (TGT) were calculated via first principle study. The electronic band structure calculation describes TGT as semiconductor having direct band gap of 1.38 eV. The valence electronic charge density contour verified the non-polar covalent nature of the bond. The absorption edge and first peak of dielectric tensor components showed electrons transition from N-p state to Ba-d state. The calculated uniaxial anisotropy (0.4842) and birefringence (−0.0061) of present paper is prearranged as follow the spectral components of the dielectric tensor. The first peak in energy loss function (ELOS) shows the energy loss of fast traveling electrons in the material. The first sharp peak produced in ELOS around 10.5 eV show plasmon loss having plasma frequencies 0.1536, 0.004 and 0.066 of dielectric tensor components. This plasmon loss also cause decrease in reflectivity spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ba{sub 2}TeO as an optoelectronic material: First-principles study

The band structure, optical, and defects properties of Ba{sub 2}TeO are systematically investigated using density functional theory with a view to understanding its potential as an optoelectronic or transparent conducting material. Ba{sub 2}TeO crystallizes with tetragonal structure (space group P4/nmm) and with a 2.93 eV optical bandgap [Besara et al., J. Solid State Chem. 222, 60 (2015)]. We find relatively modest band masses for both electrons and holes suggesting applications. Optical properties show infrared-red absorption when doped. This could potentially be useful for combining wavelength filtering and transparent conducting functions. Furthermore, our defect calculations show that Ba{sub 2}TeO is intrinsically p-type conducting under Ba-poor condition. However, the spontaneous formation of the donor defects may constrain the p-type transport properties and would need to be addressed to enable applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗