Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Mucositis Versus Tumor Control: The Therapeutic Index of Adding Chemotherapy to Irradiation of Head and Neck Cancer

Purpose: To determine whether the addition of concurrent chemotherapy to radiation for head and neck cancer (HNSCC) improves the therapeutic ratio regarding tumor control vs. mucositis. Methods and Materials: Data were taken from 14 randomized trials of radiation with or without concurrent chemotherapy for HNSCC. Mucositis-bioequivalent dose (mBED) was computed for each study using mBED = D [1 + d/(alpha/beta)] - 0.693(T - Tk)/Tp. An 'S-value,' relating the increase in the rate of Grade 3 (confluent) mucositis to the increase in mBED with radiation alone, was determined using data from trials of radiation alone with altered fractionation. We then determined the difference in the rate of mucositis and used the S-value to estimate the apparent difference in mBED in the chemoradiation and radiation alone arms for each trial. After accounting for differences in the radiation schedules, we estimated the mBED attributable to adding chemotherapy and compared it with previously published estimates of increases in tumor BED. Results: Computed S-values ranged from 0.4 to 1.7. For S = 1, the mean increase in mBED attributable to chemotherapy was 8.3 Gy{sub 10} (SD = 6.4). The average difference between tumor-BED and mBED was 2.8 Gy{sub 10} (SD = 6.0). Increasing the S-value decreases the estimated increase in mBED due to chemotherapy. Conclusions: Concurrent chemotherapy improves the therapeutic index for radiation of HNSCC. Further refinements are needed in quantifying the therapeutic gain attributable to specific radiosensitizing agents in clinical trials, notably better and more consistent reporting of treatment sequelae.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Pro5 is not essential for the formation of ‘Ni-hook’ in nickel superoxide dismutase

The N-terminus of nickel-dependent superoxide dismutase (NiSOD) forms a structural motif known as the "Ni-hook," where the peptide wraps around the metal to bring cysteine-2 and cysteine-6 into spatial proximity, allowing these residues to coordinate in a cis-geometry. A highly conserved proline-5 residue in the Ni-hook adopts a cis-conformation that is widely considered important for its formation. Herein, we investigate this role by point mutation of Pro5 to alanine. The results obtained show that the variant exhibits wild-type-like redox catalysis and features a Ni(III) center very similar to that found in enzyme. Structural analysis using x-ray absorption spectroscopy of the nickel sites in as-isolated P5A-NiSOD reveals changes in the variant and are consistent with a six-coordinate Ni site with (N/O) 4 S 2 coordination. These changes are attributed to changes in the Ni(II) site structure. Nickel-binding studies using isothermal titration calorimetry reveal two binding events with K d = 25(20) nM, and 250(60) nM. These events are attributed to i) Ni(II) binding to a preformed Ni-hook containing cis-Pro5 and ii) the combination of trans- to cis- isomerization upon Ni(II) binding, respectively. Finally, the higher-affinity binding event is absent in P5A-NiSOD, an observation attributed to the low abundance of the cis-Ala5 isomer in the apo-protein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A DFT+U study of cerium solubility in La2Zr2O7

Density functional theory plus Hubbard U correction is employed to study the solubility of cerium in La2Zr2O7. The results show that La2Zr2O7 and Ce2Zr2O7 form a solid solution over the whole range of cerium content. The solubility of Ce in La2Zr2O7 can be partially attributed to the similar ionic radii of La3+ and Ce3+. Electronic structures of the La2-yCeyZr2O7 solid solution have been analyzed. The Ce 4f states are found to be partially occupied, and Ce in the La2-yCeyZr2O7 solid solution exhibits a reduced charge state.

36 MATERIALS SCIENCE↗

Performance of Lanthanum Strontium Manganite Electrodes at High Pressure

The high-pressure performance of lanthanum strontium manganite (LSM), LSM-zirconia, and LSM/ceria composite electrodes was studied by impedance spectroscopy and dc methods. Electrode resistances decreased in proportion to P(O2)1/2 for the LSM electrode in both cathodic and anodic directions to at least 100 atm, a decrease that was attributed to dissociative oxygen adsorption, surface diffusion, and related phenomena. For the LSM-20/zirconia composite electrode, resistances decreased in proportion to P(O2)1/4 across the entire pressure range considered. Two principal features appeared in the impedance spectra, one that showed a P(O2)1/4 dependence attributed to charge transfer reactions, and one that was nearly pressure-independent, possibly due to transport in the zirconia portion of the composite. For the LSM-20/ceria composite electrode, resistances decreased as P(O2)0.3-0.4 at high pressure, depending on temperature. Two features appeared in the impedance spectra: one at low to intermediate frequency having a P(O2)1/2 dependence and one at high frequency having a P(O2)1/4 dependence. These features are attributed to dissociative oxygen adsorption and to charge transfer reactions, respectively. Results suggest that cathodic losses can be substantially lowered by operation of solid oxide fuel cells at greater than ambient pressure.

lanthanum manganite, LSM, cathode, oxygen electrod↗

Electron microscopic studies of the antiferroelectric phase in Sr{sub 0.60}Ca{sub 0.40}TiO{sub 3} ceramic

The structural variants and their coexistence across the antiferroelectric phase transition in Sr{sub 0.60}Ca{sub 0.40}TiO{sub 3} ceramic has been studied through transmission electron microscopy (TEM) at room temperature and {approx}100 deg. C. A clear evidence of the presence of superlattice reflections, corresponding to the cell doubling along the c-axis of Pbnm (or b-axis along Pnma), occurring during paraelectric to antiferroelectric transition, has been obtained through selected area electron diffraction, convergent beam electron diffraction and lattice-resolution imaging. Coexistence of the Pbnm and Pbcm phases at room temperature has been observed and attributed to the strain/disorder-induced broadening of the first-order antiferroelectric phase transition. Drastic changes in the domain structure during Pbnm to Pbcm transformation have been observed. This clearly indicates that the antiferrodistortive transition responsible for the occurrence of the antiferroelectric phase is of completely different origin and it is not just an additional follow-up of the already-existing ordering due to a{sup -}a{sup -}c{sup +} tilt schemes in the Pbnm domain. Thermal cycling studies on microstructural changes indicate some kind of memory mechanism, which retains the memory of the original a{sup -}a{sup -}c{sup +} tilt schemes in the Pbnm phase. This has been attributed to the symmetry conforming short-range order (SC-SRO) of the point defects. - Graphical abstract: Selected area diffraction (SAD) and convergent beam electron diffraction (CBED) patterns taken along the (a,b) [001] and (c,d) [110] zones of the Pbcm phase from different domains. The occurrence of the FOLZ ring corresponding to 15.5 A and the superlattice spots as indicated by black arrows confirming the existence of the cell-doubled antiferroelectric phase. Coexistence of the Pbnm and Pbcm phases across the transition, i.e. at room temperature, has been observed and attributed to the strain/disorder-induced broadening of the first-order antiferroelectric phase transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation between optical constants and crystal chemical parameters of ZrW{sub 2}O{sub 8}

The refractive indices of ZrW{sub 2}O{sub 8}, measured at wavelengths of 435.8-643.8 nm, were used to calculate n{sub D} at lambda=589.3 nm and n{sub i}nfinity at lambda=infinity from a one-term Sellmeier equation. Refractive indices, n{sub D} and dispersion values, A, are, respectively, 1.8794 and 114x10{sup -16} m{sup 2}. The high dispersion, relative to other molybdates, tungstates and Zr-containing compounds, is attributed to the low value of E{sub o}=7.7 eV and mean cation coordination number. Total electronic polarizabilities, alpha{sub total}, were calculated from n{sub i}nfinity and the Lorenz-Lorentz equation. The unusually large difference between the observed polarizability of 20.087 A{sup 3} and the calculated total polarizability alpha{sub T} of 17.59 A{sup 3} (DELTA=+12.4%) is attributed to (1) a large M-O-W angle, (2) a high degree of W 5d-O{sub (terminal)} 2p and Zr nd-O 2p hybridization, and (3) unusually high oxygen displacement factors, B(O), normalized to B(W). - Graphical abstract: Refractive indices of ZrW{sub 2}O{sub 8}, measured at lambda=435.8-643.8 nm and a one-term Sellmeier equation allow the determination of n{sub D} (lambda=589.3 nm) of 1.8794 and a dispersion value, A, of 114x10{sup -16} m{sup 2}. The unusually large difference between the observed ZrW{sub 2}O{sub 8} polarizability of 20.087 A{sup 3} and the calculated total polarizability alpha{sub T} of 17.59 A{sup 3} (DELTA=+12.4%) is attributed to (1) a large M-O-W angle, (2) a high degree of W 5d-O{sub (terminal)} 2p and Zr nd-O 2p hybridization, and (3) unusually high oxygen displacement factors, B(O), normalized to B(W).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New nonlinear optical potassium iodate K[IO{sub 3}] and borates K{sub 3}[B{sub 6}O{sub 10}]Br, KTa[B{sub 4}O{sub 6}(OH){sub 4}](OH){sub 2}{center_dot}1.33H{sub 2}O-Synthesis, structures and relation to the properties

Three optically uniaxial non-centrosymmetric potassium compounds, iodate K[IO{sub 3}] and two borates K{sub 3}[B{sub 6}O{sub 10}]Br, KTa[B{sub 4}O{sub 6}(OH){sub 4}](OH){sub 2}{center_dot}1.33H{sub 2}O have been synthesized and characterized by single-crystal X-ray diffraction. The materials were synthesized through hydrothermal techniques using initial reagents and mineralizers. All the compounds are trigonal-hexagonal: the space groups are R3 (K[IO{sub 3}]), R3m (K[B{sub 6}O{sub 10}]Br) and P-62m (KTa[B{sub 4}O{sub 6}(OH){sub 4}](OH){sub 2}{center_dot}1.33H{sub 2}O). Powder second-harmonic generation (SHG) measurements on crystals, using 1064 nm Nd:YAG laser radiation, indicate the materials are all phase-matchable and have strong second-order nonlinearities. The correlation with the perovskite structure has been found and described for K,Br-borate and K-iodate. Structure-properties relation is discussed and attributed to stereo-active lone-pair on I{sup 5+} and asymmetrical bonds in the compounds. The role of K atoms is pronounced from crystal chemistry point of view, contributing optical nonlinearities. - Graphical abstract: Structure-properties relation is attributed to stereo-active lone-pair on I{sup 5+} and asymmetrical bonds in the compounds with the crucial role of K atoms, K[IO{sub 3}] structure along 3-fold axis with umbrella-like IO{sub 3}-group and with octahedral coordination-analog with perovskite. Highlights: Black-Right-Pointing-Pointer Syntheses in hydrothermal conditions trigonal KIO{sub 3}, K{sub 3}[B{sub 6}O{sub 10}]Br and KTa[B{sub 4}O{sub 6}(OH){sub 4}](OH){sub 2}. Black-Right-Pointing-Pointer Correlation with the perovskite, found for K-iodate and K,Br-borate. Black-Right-Pointing-Pointer Structure-properties relation, attributed to I{sup 5+} lone-pair and asymmetric bonds including K-atoms. Black-Right-Pointing-Pointer The compounds are phase matchable and strongly nonlinear from powder SHG measurements. Black-Right-Pointing-Pointer Averaged second-order nonlinear coefficients Left-Pointing-Angle-Bracket d Right-Pointing-Angle-Bracket are 24, 2.8 and 1.9 pm/V.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The interaction between cations and anionic groups inducing SHG enhancement in a series of apatite-like crystals: A first-principles study

It is an interesting topic to reveal the origin of the SHG intensity enhancement after substitution from alkali and alkali-earth metal atoms to cadmium in a series of apatite-like borates KSr{sub 4}(BO{sub 3}){sub 3}, Ca{sub 5}(BO{sub 3}){sub 3}F, Cd{sub 5}(BO{sub 3}){sub 3}F. Combined with the first-principles method, SHG-density method and real-space atom-cutting method, the electronic structure, the optical properties and the contribution of respective ion and ion groups have been investigated. Second harmonic generation (SHG) responses are mainly attributed to BO{sub 3} groups with π conjugated configuration and their alignment framework. The contributions of A site are more important in CaBOF and CdBOF compounds than in KSrBO. It is also demonstrated that the strong covalent interactions between the boron–oxygen groups and the cadmium atoms contribute the enhancement of SHG responses after substitution from alkali and alkali-earth metal atoms. - graphical abstract: Combined with the first-principles method, SHG-density method and real-space atom-cutting method, the enhancement of SHG response are attributed to the interaction between cadmium and BO{sub 3} groups. - Highlights: • SHG response on a series of apatite-like borates was studied by a SHG-density method. • SHG responses are mainly attributed to BO{sub 3} groups and their alignment framework. • The contributions of A site are more important in CaBOF and CdBOF than in KSrBO. • Covalent interaction between BO and Cd is responsible for SHG of CdBOF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One- and three-dimensional silver(I)-5-sulfosalicylate coordination polymers having ligand-supported and unsupported argentophilic interactions

Four new coordination polymers, namely, (Hemim·[Ag(Hssa)(H{sub 2}O)]){sub n} (1), ([Ag(ina){sub 2} Ag(Hssa)]·CH{sub 3}OH·H{sub 2}O){sub n} (2), ([Ag{sub 2}(Hssa)(dmp){sub 1.5}]·2H{sub 2}O){sub n} (3) and [Ag{sub 2}(Hssa)(daoc)]{sub n} (4) (Hssa: 5-Sulfosalicylate, emim: 2-ethyl-4-methylimidazole, ina: isonicotinamide, dmp: 2,5-dimethylpyrazine and daoc: 1,8-diaminooctane) were synthesized and characterized by IR spectroscopy, elemental analysis, single crystal X-ray diffraction, powder X-ray diffraction (PXRD) and thermal analysis techniques. Complexes 1 and 2 are one-dimensional (1D) coordination polymers while complexes 3 and 4 are three-dimensional (3D) coordination polymers. Complex 3 consists of three dimensional (3D) 3,3,6-c net with 3,3,6T37 topology. Complex 4 exhibits a 2-fold interpenetrating 3D framework with tfc topology. Complexes 1–4 contain ligand-supported (1–3) and unsupported (4) argentophilic Ag⋯Ag interactions. Photoluminescence spectra of the complexes demonstrate that photoluminescent properties may be attributed to intraligand transition of coordinated Hssa ligand. - Graphical abstract: In this study, four new Ag(I)-coordination polymers with 5-sulfosalicylate and some N-donor ligands were synthesized and characterized. Complexes 1 and 2 are one-dimensional (1D) coordination polymers while complexes 3 and 4 are three-dimensional (3D) coordination polymers. Complex 3 consists of three dimensional (3D) 3,3,6-c net with 3,3,6T37 topology. Complex 4 exhibits a 2-fold interpenetrating 3D framework with tfc topology. The complexes 1–4 contain ligand-supported (1–3) and unsupported (4) argentophilic Ag⋯Ag interactions. Photoluminescence spectra of the complexes demonstrated that photoluminescent properties may be attributed to intraligand transition of coordinated Hssa ligand. - Highlights: • Four novel Ag(I)-coordination polymers with 5-sulfosalicylate and N-donor ligands. • Complexes 1–4 contain ligand-supported (1–3) and unsupported (4) argentophilic Ag⋯Ag interactions. • Photoluminescent properties of the complexes may be attributed to intraligand transition of coordinated Hssa ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Sr, Ce and P on the microstructure and mechanical properties of rapidly solidified Al7Si alloys

Highlights: • Rapid solidification caused formation of nanoscaled Si particle chains. • Sr or Ce induced the columnar transition zone only at extremely high cooling rate. • Enhancement of hardness is attributed to fine dispersion of eutectic Si, grain refinement and the supersaturation of Si. • Sr or Ce caused further enhancement of hardness, attributing to Si modification. - Abstract: A series of Al7Si based alloys with trace addition of Sr, Ce or P were prepared using melt-spinning at two different high cooling rates, and the microstructure as well as the hardness of the ribbons was comprehensively studied. The results show that Sr or Ce induces the formation of columnar transition zone and modifies the morphology of eutectic Si phase from dispersed particle chains to fine fibers only at extremely high cooling rate. However, P has little effect on the microstructure of either α-Al or eutectic Si. Compared with conventional casting, the Al7Si ribbons exhibit extremely high hardness due to the fine dispersion of eutectic Si, the grain refinement and the supersaturation of Si. The hardness is further enhanced by Sr or Ce addition at extremely high cooling rate, especially for columnar and equiaxed zones, attributing to the modification effect on Si phase.

36 MATERIALS SCIENCE↗

Synthesis, characterization, and anomalous dielectric and conductivity performance of one-dimensional (bdaH)InSe{sub 2} (bda = 1,4-butanediamine)

Graphical abstract: Anomalous dielectric and conductivity performance have been observed in the organic-containing indium selenide (bdaH)InSe{sub 2}, which are attributed to the water molecules existing in the crystal boundary rather than phase transition. Highlights: {yields} The title compound is the first example of organic-containing one-dimensional indium selenide. {yields} The anomalous dielectric peak is attributed to water molecules in crystal boundary. {yields} The inorganic and organic components of the title compound are connected via hydrogen bonding to form a supramolecular three-dimensional network. -- Abstract: A new indium selenide, namely (bdaH)InSe{sub 2} (1) (bda = 1,4-butanediamine) has been solvothermally synthesized and structurally characterized. It belongs to the non-centrosymmetric space group Fdd2. Its structure features an infinite one-dimensional anionic chain of [InSe{sub 2}]{sub n}{sup n-} with monoprotonated [bdaH]{sup +} as charge compensating cation. The organic [bdaH]{sup +} cations are joined into a supramolecular one-dimensional chain via N-H...N hydrogen bonding, which further interacts with the inorganic chain via N-H...Se and C-H...Se hydrogen bonding, forming a supramolecular three-dimensional network. Based on such a well-defined structure, the thermal stability, optical, conductivity, and dielectric properties were systematically investigated, showing that dielectric constant, as well as conductivity, had a hump at about 95 {sup o}C, which could be attributed to water molecules in the crystal boundary.

36 MATERIALS SCIENCE↗

Novel synthesis of Zr{sub x}Ti{sub 1-x}O{sub n} mixed oxides using titanyl sulphate and pressurized hot and supercritical fluids, and their photocatalytic comparison with sol-gel prepared equivalents

Highlights: • Novel preparation of Zr{sub x}Ti{sub 1-x}O{sub n} mixed oxides by using titanyl sulphate and pressurized hot water and supercritical methanol. • Comparison of photoactivity of prepared mixed oxides with sol-gel-prepared equivalents in Acid orange 7 photodegradation. • The highest photoactivity of TiO{sub 2}-H is attributed to small anatase crystallite-size. • The highest photoactivity of Zr{sub 0.1}Ti{sub 0.9}O{sub n}-G is attributed to the existence of anatase-brookite phase mixture and small anatase crystallite-size. • The optimum Zr loading in TiO{sub 2} is below 10·mol%. - Abstract: Zr{sub x}Ti{sub 1-x}O{sub n} mixed oxides with five various molar ratios of Zr:Ti and their parent oxides were prepared, combining thermal hydrolysis (H) with pressurized hot water crystallization and supercritical methanol drying. Their photoactivity was compared to equivalent materials prepared by sol-gel (G) method. Zr{sub 0.1}Ti{sub 0.9}O{sub n}-G was the most photoactive mixed oxide, which showed significantly higher photoactivity than Zr{sub 0.1}Ti{sub 0.9}O{sub n}-H. Higher photoactivity of Zr{sub 0.1}Ti{sub 0.9}O{sub n}-G can be attributed to phase composition (anatase-brookite phase mixture) and smaller TiO{sub 2} anatase crystallite-size. The Zr dopation in TiO{sub 2} did not improve the photoactivity neither of sol-gel-synthetized, nor thermal hydrolysis-synthetized mixed oxides in AO7 photodegradation. Zr in higher loadings (>10 mol%) formed separate monoclinic and tetragonal ZrO{sub 2} and monoclinic zirconium titanates{sub .} Unlike Zr{sup 4+} ions in Zr doped TiO{sub 2} the separate monoclinic and tetragonal ZrO{sub 2} and monoclinic zirconium titanates did not serve as electron trapping centres but as electron-hole recombination centres. The Zr loading in TiO{sub 2} should be below 10 mol%.

36 MATERIALS SCIENCE↗

Hybrid polymer films based ZnS nanocomposites and its optical and morphological properties: Monitoring the role of the binding-site interaction

Highlights: • ZnS NPs were formed with adequate quantum confinement, leading to a blue shift. • The hybrid polymer films exhibited different optical behavior, which was attributed to the greater size of NPs. • The emission bands for the hybrid polymer films exhibited slight blue-shifts. • A slightly quenched emission band was observed after varying the length of the hydrophilic block. • AFM images also show changes in morphology, which may be attributed mainly to the hydrophilic domain. - Abstract: A series of hybrid polymer films were prepared using self-assembly block copolymers as nanoreactor of ZnS nanoparticles (NPs). The self-assembled poly(acrylic acid)-block-poly(N-phenylmaleimide) was prepared by Atom-Transfer Radical Polymerization (ATRP) in different block composition. Subsequently the fluorescent NPs were synthesized into the polymer matrices in order to modify its optical and thermal properties and to analyze its effect on the morphology properties (roughness and porosity). As results, significant effects on the properties of the hybrid materials were obtained under different percentages of the NPs. These materials exhibited blue- or red-shift emission bands depending on the length of hydrophilic domain. Additionally, a quenched emission band is seen, which may also be attributed primarily to the composition of the hydrophilic domain and to the greater percentage of ZnS NPs. The hybrid polymer films showed effects on the porosity and roughness of the surfaces, which was analyzed by AFM and SEM microscopic techniques.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Realization of strong violet and blue emissions from ZnO thin films by incorporation of Cu ions

Highlights: • A strong blue-violet co-emission occurs after Cu ions are doped into ZnO thin films.. • The violet emission centered at 430 nm is attributed to transitions of electrons from conduction band to Cu{sup +} acceptor levels. • The blue emission centered at 470 nm is attributed to transitions of electrons from Cu{sup 2+} donor levels to Cu{sup +} acceptor levels. • Both the violet and blue emissions decrease when Cu-doping concentration is higher than 2 at.%. - Abstract: In recent years, Cu-doped ZnO materials have attracted wide attention due to some unique properties, such as p-type conduction, room-temperature ferromagnetism and plentiful luminescence behavior. In this work, Cu-doped ZnO thin films with different doping levels were prepared by sol–gel method. The structural, morphological features and the composition of the samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDX), respectively. The optical properties were analyzed by the UV–visible transmittance spectra and fluorescence spectra. The Cu-doping in a low concentration does not influence the crystal phase of wurtzite ZnO and has a very small impact on c-axis preferred orientation of ZnO thin films. With the increase of Cu-doping concentration, the Cu ions are gradually changed from dominant Cu{sup +} ions to dominant Cu{sup 2+} ions. Cu-doping in a low concentration caused strong blue-violet emissions in ZnO thin films. The violet emission is attributed to the transition of electrons from the conduction band to Cu{sup +} acceptor levels, and the blue emission is ascribed to the transition of electrons from Cu{sup 2+} donor levels to Cu{sup +} acceptor levels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Subspace-based Inverse Uncertainty Quantification for Nuclear Data Assessment

Safety analysis and design optimization depend on the accurate prediction of various reactor attributes. Predictions can be enhanced by reducing the uncertainty associated with the attributes of interest. An inverse problem can be defined and solved to assess the sources of uncertainty, and experimental effort can be subsequently directed to further improve the uncertainty associated with these sources. In this work a subspace-based algorithm for inverse sensitivity/uncertainty quantification (IS/UQ) has been developed to enable analysts account for all sources of nuclear data uncertainties in support of target accuracy assessment-type analysis. An approximate analytical solution of the optimization problem is used to guide the search for the dominant uncertainty subspace. By limiting the search to a subspace, the degrees of freedom available for the optimization search are significantly reduced. A quarter PWR fuel assembly is modeled and the accuracy of the multiplication factor and the fission reaction rate are used as reactor attributes whose uncertainties are to be reduced. Numerical experiments are used to demonstrate the computational efficiency of the proposed algorithm. Our ongoing work is focusing on extending the proposed algorithm to account for various forms of feedback, e.g., thermal-hydraulics and depletion effects.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Competing effects of electronic and nuclear energy loss on microstructural evolution in ionic-covalent materials

Ever increasing energy needs have raised the demands for advanced fuels and cladding materials that withstand the extreme radiation environments with improved accident tolerance over a long period of time. Ceria (CeO2) is a well known ionic conductor that is isostructural with urania and plutonia-based nuclear fuels. In the context of nuclear fuels, immobilization and transmutation of actinides, CeO2 is a model system for radiation effect studies. Covalent silicon carbide (SiC) is a candidate for use as structural material in fusion, cladding material for fission reactors, and an inert matrix for the transmutation of plutonium and other radioactive actinides. Understanding microstructural change of these ionic-covalent materials to irradiation is important for advanced nuclear energy systems. While displacements from nuclear energy loss may be the primary contribution to damage accumulation in a crystalline matrix and a driving force for the grain boundary evolution in nanostructured materials, local non-equilibrium disorder and excitation through electronic energy loss may, however, produce additional damage or anneal pre-existing defects. At intermediate transit energies where electronic and nuclear energy losses are both significant, synergistic, additive or competitive processes may evolve that affect the dynamic response of materials to irradiation. The response of crystalline and nanostructured CeO2 and SiC to ion irradiation are studied under different nuclear and electronic stopping powers to describe some general material response in this transit energy regime. Although fast radiation-induced grain growth in CeO2 is evident with no phase transformation, different fluence and dose dependence on the growth rate is observed under Si and Au irradiations. While grain shrinkage and amorphization are observed in the nano-engineered 3C SiC with a high-density of stacking faults embedded in nanosize columnar grains, significantly enhanced radiation resistance is attributed to stacking faults that promote efficient point defect annihilation. Moreover, competing effects of electronic and nuclear energy loss on the damage accumulation and annihilation are observed in crystalline 4H-SiC. Systematic experiments and simulation effort are needed to understand the competitive or synergistic effects.

36 MATERIALS SCIENCE↗

Discrete element modeling of irregular-shaped soft pine particle flow in an FT4 powder rheometer

Pine residues are a commonly used biomass feedstock that consists of different anatomical fractions, each with distinct particle characteristics. Here, in this work, an experiment-informed discrete element model is developed to investigate the flowability of pine residues in an FT4 rheometer. Multi-sphere particles with distinct particle attributes are created to model each anatomical fraction type. A systematic analysis of specimens with varying particle characteristics (e.g., anatomical fraction type, particle shape, and size) is conducted to elucidate the relationship between particle attributes and flowability. The results show that stems recorded the highest axial force and torque and, correspondingly, the highest flow energy, which is attributed to their high stiffness and interlocking effect. Increasing their percentage in the mixture increases the flow energy while increasing needles tends to decrease flow energy. Knowledge gained in this study on the flow of anatomical fractions is important for the efficient and robust processing of pine residues.

09 BIOMASS FUELS↗

Suppression of NF-κB signaling and NLRP3 inflammasome activation in macrophages is responsible for the amelioration of experimental murine colitis by the natural compound fraxinellone

Inflammatory bowel disease (IBD) affects millions of people worldwide. Although the etiology of this disease is uncertain, accumulating evidence indicates a key role for the activated mucosal immune system. In the present study, we examined the effects of the natural compound fraxinellone on dextran sulfate sodium (DSS)-induced colitis in mice, an animal model that mimics IBD. Treatment with fraxinellone significantly reduced weight loss and diarrhea in mice and alleviated the macroscopic and microscopic signs of the disease. In addition, the activities of myeloperoxidase and alkaline phosphatase were markedly suppressed, while the levels of glutathione were increased in colitis tissues following fraxinellone treatment. This compound also decreased the colonic levels of interleukin (IL)-1β, IL-6, IL-18 and tumor necrosis factor (TNF)-α in a concentration-dependent manner. These effects of fraxinellone in mice with experimental colitis were attributed to its inhibition of CD11b{sup +} macrophage infiltration. The mRNA levels of macrophage-related molecules in the colon, including intercellular adhesion molecule 1 (ICAM1), vascular cell adhesion molecule 1 (VCAM1), inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX2), were also markedly inhibited following fraxinellone treatment. The results from in vitro assays showed that fraxinellone significantly reduced lipopolysaccharide (LPS)-induced production of nitric oxide (NO), IL-1β and IL-18 as well as the activity of iNOS in both THP-1 cells and mouse primary peritoneal macrophages. The mechanisms responsible for these effects were attributed to the inhibitory role of fraxinellone in NF-κB signaling and NLRP3 inflammasome activation. Overall, our results support fraxinellone as a novel drug candidate in the treatment of colonic inflammation. - Highlights: • Fraxinellone, a lactone compound, alleviated DSS induced colitis. • The effects of fraxinellone were attributed to its inhibition on infiltrated macrophages. • It regulated cytokine profiles in mice with experimental colitis. • It suppressed NF-κB signaling and NLRP3 inflammasome activation in macrophages.

60 APPLIED LIFE SCIENCES↗