Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Alternative Relativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Heterothermic Migration Strategies in Flying Vertebrates

Migration is a widespread and highly variable trait among animals. Population-level patterns arise from individual-level decisions, including physiological and energetic constraints. Many aspects of migration are influenced by behaviors and strategies employed during periods of stopover, where migrants may encounter variable or unpredictable conditions. Thermoregulation can be a major cost for homeotherms which largely encounter ambient temperatures below the lower critical temperature during migration, especially during the rest phase of the daily cycle. In this review we describe the empirical evidence, theoretical models, and potential implications of bats and birds that use heterothermy to reduce thermoregulatory costs during migration. Torpor-assisted migration is a strategy described for migrating temperate insectivorous bats, whereby torpor can be used during periods of inactivity to drastically reduce thermoregulatory costs and increase net refueling rate, leading to shorter stopover duration, reduced fuel load requirement, and potential consequences for broad-scale movement patterns and survival. Hummingbirds can adopt a similar strategy, but most birds are not capable of torpor. However, there is an increasing recognition of the use of more shallow heterothermic strategies by diverse bird species during migration, with similarly important implications for migration energetics. A growing body of published literature and preliminary data from ongoing research indicate that heterothermic migration strategies in birds may be more common than traditionally appreciated. We further take a broad evolutionary perspective to consider heterothermy as an alternative to migration in some species, or as a conceptual link to consider alternatives to seasonal resource limitations. There is a growing body of evidence related to heterothermic migration strategies in bats and birds, but many important questions related to the broader implications of this strategy remain.

bats↗

Average-atom model with Siegert states

In plasmas, electronic states can be well-localized bound states or itinerant free states, or something in between. In self-consistent treatments of plasma electronic structure such as the average-atom model, all states must be accurately resolved in order to achieve a converged numerical solution. Furthermore, this is a challenging numerical and algorithmic problem in large part due to the continuum of free states which is relatively expensive and difficult to resolve accurately. Siegert states are an appealing alternative. They form a complete eigenbasis with a purely discrete spectrum while still being equivalent to a representation in terms of the usual bound states and free states. However, many of their properties are unintuitive, and it is not obvious that they are suitable for self-consistent plasma electronic structure calculations. Here it is demonstrated that Siegert states can be used to accurately solve an average-atom model and offer advantages over the traditional finite-difference approach, including a concrete physical picture of pressure ionization and continuum resonances.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Viscosities of the Baryon-Rich Quark-Gluon Plasma from Beam Energy Scan Data

Here, this work presents the first Bayesian inference study of the (3 + 1)D dynamics of relativistic heavy-ion collisions and quark-gluon plasma viscosities using an event-by-event (3 + 1)D hydrodynamics + hadronic transport theoretical framework and data from the Relativistic Heavy Ion Collider Beam energy scan program. Robust constraints on initial state nuclear stopping and the baryon chemical potential-dependent shear viscosity of the produced quantum chromodynamic (QCD) matter are obtained. The specific bulk viscosity of the QCD matter is found to exhibit a preferred maximum around $\sqrt{s_{NN}}$ = 19.6 GeV . This result allows for the alternative interpretation of a reduction (and/or increase) of the speed of sound relative to that of the employed lattice-QCD based equation of state for net baryon chemical potential μ B ~0.2(0.4) GeV .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Efficient Monte Carlo event generation for neutrino-nucleus exclusive cross sections

Modern neutrino-nucleus cross section computations need to incorporate sophisticated nuclear models to achieve greater predictive precision. However, the computational complexity of these advanced models often limits their practicality for experimental analyses. To address this challenge, we introduce a new Monte Carlo method utilizing normalizing flows to generate surrogate cross sections that closely approximate those of the original model while significantly reducing computational overhead. As a case study, we built a Monte Carlo event generator for the neutrino-nucleus cross section model developed by the Ghent group. This model employs a Hartree-Fock procedure to establish a quantum mechanical framework in which both the bound and scattering nucleon states are solutions to the mean-field nuclear potential. The surrogate cross sections generated by our method demonstrate excellent accuracy with a relative effective sample size of more than 98.4%, providing a computationally efficient alternative to traditional Monte Carlo sampling methods for differential cross sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

What Shapes Transportation Charging Infrastructure Availability? Evidence from Tennessee

This study examines how community, travel, and freight characteristics relate to public charging infrastructure availability across Tennessee ZIP codes. We link Alternative Fuels Data Center station locations with traffic, socioeconomic, demographic, commuting, and freight employment data to build a ZIP code-level dataset. Ordinary least squares regression captures variation in chargers per 10,000 residents (R2=0.311). Quantile regressions at the 25th, 50th, and 75th percentiles, with pseudo R2 values up to 0.099, show that the determinants of infrastructure availability differ across low-, medium-, and high-availability areas. Percent female, percent car commuters, average household size, and median age are negatively associated with charging availability across much of the distribution. Truck traffic is positively associated only in lower-availability ZIP codes, while vehicle miles traveled shifts from a negative association at the lower end of the distribution to a positive association at the upper end. The results provide insight into how public charging deployment aligns with community characteristics, mobility demand, and freight activity across Tennessee. Future work can distinguish charger types and power levels, incorporate land-use and temporal rollout patterns, and examine how charging infrastructure needs differ across urban and rural contexts.

Calderón, Oriana [University of Tennessee, Knoxvil↗

AmeriFlux US-Wgr Willamette Grass

This is the AmeriFlux version of the carbon flux data for the site US-Wgr Willamette Grass. Site Description - he site was established in summer 2014 and is part of the Oregon eddy covariance flux tower network . Meteorological variables such as temperature, humidity, solar irradiance and wind are measured at this site. Turbulent fluxes of water vapor, carbon dioxide and heat are observed and stored as 30 minute averages. The crop changes periodically and rye grass and fescue is grown alternately at this site located in Oregon's Willamette Valley with its relatively mild climate. The grass site is also part of the PhenoCam network operated by Harvard University and the University of New Hampshire.

Schmidt, Andres↗

AmeriFlux US-Wwt Willamette Wheat

This is the AmeriFlux version of the carbon flux data for the site US-Wwt Willamette Wheat. Site Description - The site was established in summer 2014 and is part of the Oregon eddy covariance flux tower network . Meteorological variables such as temperature, humidity, solar irradiance and wind are measured at this site. Turbulent fluxes of water vapor, carbon dioxide and heat are observed and stored as 30 minute averages. The crop changes periodically and rye grass and fescue is grown alternately at this site located in Oregon's Willamette Valley with its relatively mild climate. The Wheat site is also part of the PhenoCam network operated by Harvard University and the University of New Hampshire.

Law, Bev↗

The Kinetic Monte Carlo Algorithm in Materials Science: Study of Radiation-Induced Segregation in Fe-Cr alloys [Slides]

KMC is a flexible tool applicable to many fields in Material Science. Continuum models need free energies and transport coefficients. Atomistic KMC: an efficient tool to study RIS especially when coupled with ab initio calculations. AKMC generates crucial data to incorporate in Phase Field methods. AKMC shows that RIS profiles depend strongly on the interface spacing. Drawbacks include that it is time consuming and limited to relatively short times. Self-Consistent Mean-Field (SCMF) is an alternative approach to calculate phenomenological coefficients that avoids the KMC caveats.

36 MATERIALS SCIENCE↗

Evolving Grid Services, Products, and Market Opportunities for Regulated Electric Utilities

This report and policy brief focus on the more recent changes and evolutions in grid services, products, and market opportunities regulated electric utilities are offering to their customers, both traditional end-use electric customers as well as third-party party businesses. Drawing on a database of more than 50 recent examples, the most prevalent and significant evolutions are occurring in: residential retail rate design shifts toward voluntary and default time-of-use (TOU); changes to distributed generation (DG) compensation methodologies; utilization of customer and non-utility assets as non-wires alternatives (NWAs); and utility investments in electric vehicle (EV) infrastructure. Important and related themes emerge from this assessment of recent trends suggesting regulators and policymakers should formulate clear and consistent policy goals around the following two issues: 1. Opportunities increasing competition to serve the electricity needs of retail customers. Reforms that drive increases in NWAs and DG pit utility investments against customer investments and may erode the exclusivity of the utility franchise. In contrast, reforms to DG compensation, that may reduce the financial benefits of a customer’s investment, may maintain or strengthen the firmness of the utility franchise boundaries. 2.Opportunities driving greater innovation within and outside the electric industry. Electric utilities are innovating by developing novel NWA opportunities that can provide financial support for the broader adoption of DERs. There are also electric utility efforts to enable broader innovation in other industries, where utility investment in EV charging infrastructure could promote greater EV ownership and enable utility control of these resources to provide grid services.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Preliminary 235 U(n,f)/ 6 Li(n,t)a Cross Section Ratio Data & Update on the 239 Pu(n,f)/ 235 U(n,f) Cross Section Ratio (FissionTPC FY2019 Report)

The primary motivation for the fissionTPC experiment is to provide precise, accurate data for evaluation of the 239 Pu(n,f) cross section. Neutron induced fission cross sections are typically measured as ratios, with a well known standard cross section being in the denominator. Measuring a ratio removes the need to quantify the neutron beam flux which is difficult to determine accurately. Any cross section ratio measurement is ultimately limited by the accuracy of the standard used. While the 235 U(n,f) standard is well measured some light particle reactions are known as well or better. Light particle reactions also remove some of the shared systematic uncertainties that are present in an actinide-only ratio measurement. To this end the NIFFTE collaboration originally proposed to measure the 239 Pu(n,f)/ 1 H(n,el) cross section ratio. The 1 H(n,el) reaction is well measured, smoothly varying as a function of energy and has good theoretical support, making it an ideal candidate for a cross section standard. Through simulation-based study and initial data collection with the fissionTPC of a 235 U(n,f)/ 1 H(n,el) cross section ratio it was determined that the measurement uncertainties could not be reduced sufficently to take full advantage of the high accuracy of the 1 H(n,el) reaction. The primary difficulties faced were the low energy of the scattered protons which do not provide enough signal to measure the neutron time-of-flight (nToF) with the fissionTPC fast cathode amplifier, and the the background (n,p) signals induced by the high energy component of the WNR beam. It should be noted that these challenges would be greatly reduced if we were to make such a measurement at a monoenergetic neutron facility. In light of these challenges other reactions were investigated. The 6 Li(n,t)a reaction was identified as a good alternative. The 4.8 MeV Q-value of the reaction provides a relatively large signal for nToF determination and the two charged particles (t & a) released in the reaction provide a signal well suited for background suppression in the fissionTPC. The 6 Li(n,t) reaction is considered a standard up to 1 MeV and is currently evaluated up to 3 MeV incident neutron energy. While this is a narrower energy range than the 1 H(n,el) reaction it overlaps well with the fission neutron spectrum. A mock evaluation was performed and it was estimated that a measurement of 239 Pu(n,f)/ 6 Li(n,t) would have an impact on the 239 Pu(n,f) evaluation comparable to a measurement using a the 1 H(n,el) reaction. While the 6 Li(n,t) reaction is not as well measured as the 1 H(n,el) reaction, the lack of previous measurements in the GMA database means that a new measurement of 239 Pu(n,f)/ 6 Li(n,t) will have a greater weighting and therefore a large impact on a future evaluation. In addition to providing a reduction in the 239 Pu(n,f) cross section evaluation uncertainties, a measurement of 6 Li(n,t) in the fissionTPC will provide data to resolve a discrepancy in previous measurements of the reaction above 1 MeV. Furthermore, the 6 Li data collected in the fissionTPC can also be analyzed to measure the 6 Li(n,nd) reaction for which there is limited discrepant data in the GMA database. This report will focus on: the motivation for making a 239 Pu(n,f)/ 6 Li(n,t) cross section ratio measurement; a preliminary look at 235 U(n,f)/ 6 Li(n,t) data collected which will emphasize the capability of the fissionTPC to make an nToF measurement with the fast cathode amplifier; and finally will provide a brief update on the 239 Pu(n,f)/ 235 U(n,f) cross section analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Review of Amendment Delivery and Distribution Methods, and Relevance to Potential In Situ Source Area Treatment at the Hanford Site

The U.S. Department of Energy’s Hanford Site in southeastern Washington State is a complex of multiple facilities where historical release events in the Central Plateau area have resulted in subsurface contamination of the vadose zone, a perched-water zone, and underlying aquifer. Although some contaminants have already migrated through the vadose zone into the groundwater, contaminants remaining in the unsaturated zone are a potential long-term risk as a source for further groundwater contamination. Moreover, a perched-water zone located in the 200-DV-1 Operable Unit at Hanford creates further remediation difficulties. Remediation options are limited for contaminants located in the vadose and perched-water zones within the Central Plateau due to considerable depth, co-located contaminants, and complexities associated with physical and biogeochemical heterogeneities. Existing comprehensive reviews discuss potential remedial technologies relevant to Hanford Site conditions (e.g., deep vadose zone and perched water) and provide treatment technology recommendations. Many of the recommended in situ remediation technologies rely on introduction of amendments into the subsurface to achieve remedial goals. However, there are currently few review or guidance documents that provide a comprehensive look at mechanisms and considerations related to amendment delivery and distribution. This document summarizes amendment types, delivery techniques, subsurface access methods, and the applicability of delivery methods and amendments for specific subsurface target zones, including in the context of Hanford Central Plateau applications. Guidance on the appropriateness of a remedial technology for a specific site and contaminant is not included within this document. Rather, this document is intended to be used when considering remediation technologies and the associated amendments. An overview of amendment types (i.e., liquid, gas, and solids) and access/distribution methods used in subsurface remediation is provided, along with discussion of the maturity level (low, medium, or high), advantages, and limitations that relate to the potential effectiveness of each approach in the context of site-specific factors (subsurface geology, geochemistry, contaminant properties, etc.). There are many Hanford Site-specific factors that influence the suitability and appropriateness of amendment delivery strategies. Excluding amendment delivery approaches that are unsuitable for the Hanford context, each approach was assessed for applicability to the following target zones: unsaturated high permeability, unsaturated low permeability, perched water, saturated high permeability, and saturated low permeability zones. This compilation and discussion related to amendment delivery mechanisms provides a useful resource for evaluating remedial alternatives for source area contamination in the Hanford Central Plateau.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Summer 2021 Co-op Report: X-Ray Scintillation Detector (A Co-op Work Experience Report)

The M-3 team was in need of a detector that could be used properly characterize their X-Ray machines. It can also be used to diagnose the X-ray in the case that problems arise before or during an experiment. They put me in charge of designing, ordering, and constructing said detector. After doing research, I found that scintillation-based detectors would be the best diagnostic tool for this purpose. It will allow the team to collect a full photon count of the X-ray pulse as well as provide spectroscopy functions with which we can view photon counts at different energy levels. This will also allow them to calculate an accurate dose given from the machine. Due to lead times, the crystals are still in manufacturing, thus the detector could not be completed. Although the designs and calculations needed to construct and operate the scintillator have been completed which is what I will be presenting in this document. Compared to the detectors being used before, my design offers a cheaper and far more efficient alternative.

42 ENGINEERING↗

Diaphragm spring gives clutch over-center toggle effect

Diaphragm spring clutch mechanism is used in testing the relative merits of eddy-current and hysteresis dampers. The dampers are alternately coupled to a single damping boom shaft. The floating clutch mechanism enables the inoperative damper to remain completely isolated from the damping boom shaft during test of the other damper.

Rosenberg, H. W.↗

Investigation of L-band shipboard antennas for maritime satellite applications

A basic conceptual investigation of low cost L-band antenna subsystems for shipboard use was conducted by identifying the various pertinent design trade-offs and related performance characteristics peculiar to the civilian maritime application, and by comparing alternate approaches for their simplicity and general suitability. The study was not directed at a single specific proposal, but was intended to be parametric in nature. Antenna system concepts were to be investigated for a range of gain of 3 to 18 dB, with a value of about 10 dB considered as a baseline reference. As the primary source of potential complexity in shipboard antennas, which have beamwidths less than hemispherical as the beam pointing or selecting mechanism, major emphasis was directed at this aspect. Three categories of antenna system concepts were identified: (1) mechanically pointed, single-beam antennas; (2) fixed antennas with switched-beams; and (3) electronically-steered phased arrays. It is recommended that an L-band short backfire antenna subsystem, including a two-axis motor driven gimbal mount, and necessary single channel monopulse tracking receiver portions be developed for demonstration of performance and subsystem simplicity.

Heckert, G. P.↗

Cost/benefit trade-offs for reducing the energy consumption of commercial air transportation (RECAT)

A study has been performed to evaluate the opportunities for reducing the energy requirements of the U.S. domestic air passenger transport system through improved operational techniques, modified in-service aircraft, derivatives of current production models, or new aircraft using either current or advanced technology. Each of the fuel-conserving alternatives has been investigated individually to test its potential for fuel conservation relative to a hypothetical baseline case in which current, in-production aircraft types are assumed to operate, without modification and with current operational techniques, into the future out to the year 2000.

Gobetz, F. W.↗

Numerical methods for inviscid/viscous flows

A study of numerical schemes for solving viscous fluid flow problems with sizable regions of predominantly inviscid flow is presented. Difficulties associated with the familiar central difference approach for such problems were analyzed and alternative finite difference approaches employing windward concepts are presented. In addition, difference relations based on exponential operators were developed. All such schemes were demonstrated and evaluated through application to the case of Falkner Skan flow with blowing - a problem in which a sizable region of predominantly inviscid flow develops near the injection surface that traditionally causes numerical difficulty.

El-Mistikawy, T. M.↗

Development of a fire test facility for graphite fiber-reinforced composites

A number of modifications were added to the Model 25 facility to make it specifically applicable for composite material screening tests. Most significant was the development of hardware for trapping fibers released during test and isolating them for quantitative measurement. Capability was added for increasing test section velocities and increasing the range of air/fuel ratios available from very rich to very lean. A provision was added for agitation of the test specimen and the combustion gases by a pulsating gas supply. A variety of specimen configurations was evaluated by an extensive series of tests on a graphite-epoxy reference composite which is representative of material currently used in advanced aircraft. A standard test technique and specimen configuration were established which was satisfactory for the reference composite. A test program was then performed on several alternate composite materials to verify the validity of the test method for relative evaluation of a variety of composite materials.

Alexander, J. G.↗