Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Adsorbent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Iron and iron-bound phosphate accumulate in surface soils of ice-wedge polygons in arctic tundra

Phosphorus (P) is a limiting or co-limiting nutrient to plants and microorganisms in diverse ecosystems that include the arctic tundra. Certain soil minerals can adsorb or co-precipitate with phosphate, and this mineral-bound P provides a potentially large P reservoir in soils. Iron (Fe) oxyhydroxides have a high capacity to adsorb phosphate; however, the ability of Fe oxyhydroxides to adsorb phosphate and limit P bioavailability in organic tundra soils is not known. In this study, we examined the depth distribution of soil Fe and P species in the active layer (<30 cm) of low-centered and high-centered ice-wedge polygons at the Barrow Environmental Observatory on the Alaska North Slope. Soil reservoirs of Fe and P in bulk horizons and in narrower depth increments were characterized using sequential chemical extractions and synchrotron-based X-ray absorption spectroscopy (XAS). Organic horizons across all polygon features ( e.g. , trough, ridge, and center) were enriched in extractable Fe and P relative to mineral horizons. Soil Fe was dominated by organic-bound Fe and short-range ordered Fe oxyhydroxides, while soil P was primarily associated with oxides and organic matter in organic horizons but apatite and/or calcareous minerals in mineral horizons. Iron oxyhydroxides and Fe-bound inorganic P (P i ) were most enriched at the soil surface and decreased gradually with depth, and Fe-bound P i was >4× greater than water-soluble P i . These results demonstrate that Fe-bound P i is a large and ecologically important reservoir of phosphate. We contend that Fe oxyhydroxides and other minerals may regulate P i solubility under fluctuating redox conditions in organic surface soils on the arctic tundra.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Effects of nanoconfinement and surface charge on iron adsorption on mesoporous silica

Here, we present a combined molecular dynamics (MD) simulation and X-ray absorption fine structure (XAFS) spectroscopic investigation of aqueous iron adsorption on nanoconfined amorphous silica surfaces. The simulation models examine the effects of pore size, pH (surface charge), iron valency, and counter-ion (chloride or hydroxide). The simulation methods were validated by comparing the coordination environment of adsorbed iron with coordination numbers and bond lengths derived from XAFS. In the MD models, nanoconfinement effects on local iron coordination were investigated by comparing results for unconfined silica surfaces and in confined domains within 2 nm, 4 nm, and 8 nm pores. Experimentally, coordination environments of iron adsorbed onto mesoporous silica with 4 nm and 8 nm pores at pH 7.5 were investigated. The effect of pH in the MD models was included by simulating Fe(II) adsorption onto negatively charged SiO 2 surfaces and Fe(III) adsorption on neutral surfaces. The simulation results show that iron adsorption depends significantly on silica surface charge, as expected based on electrostatic interactions. Adsorption on a negatively charged surface is an order of magnitude greater than on the neutral surface, and simulated surface coverages are consistent with experimental results. Pore size effects from the MD simulations were most notable in the adsorption of Fe(II) at deprotonated surface sites (SiO - ), but adsorption trends varied with concentration and aqueous Fe speciation. The coordination environment of adsorbed iron varied significantly with the type of anion. Considerable ion pairing with hydroxide anions led to the formation of oligomeric surface complexes and aqueous species, resulting in larger iron hydroxide clusters at higher surface loadings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Modelling drug adsorption in metal–organic frameworks: the role of solvent

Solvent plays a key role in biological functions, catalysis, and drug delivery. Metal–organic frameworks (MOFs) due to their tunable functionalities, porosities and surface areas have been recently used as drug delivery vehicles. To investigate the effect of solvent on drug adsorption in MOFs, we have performed integrated computational and experimental studies in selected biocompatible MOFs, specifically, UiO-AZB, HKUST-1 (or CuBTC) and NH 2 -MIL-53(Al). The adsorption of three drugs, namely, 5-fluorouracil (5-FU), ibuprofen (IBU), and hydroxyurea (HU) were performed in the presence and absence of the ethanol. Our computational predictions, at 1 atmospheric pressure, showed a reasonable agreement with experimental studies performed in the presence of ethanol. We find that in the presence of ethanol the drug molecules were adsorbed at the interface of solvent and MOFs. Moreover, the computationally calculated adsorption isotherms suggested that the drug adsorption was driven by electrostatic interactions at lower pressures (<10 –4 Pa). Our computational predictions in the absence of ethanol were higher compared to those in the presence of ethanol. The MOF–adsorbate interaction (U HA ) energy decreased with decrease in the size of a drug molecule in all three MOFs at all simulated pressures. At high pressure the interaction energy increases with increase in the MOFs pore size as the number of molecules adsorbed increases. Thus, our research shows the important role played by solvent in drug adsorption and suggests that it is critical to consider solvent while performing computational studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photocatalyzed electron exchange between organic chromophores and hematite nanoparticles and the role of solid-state charge transport

Understanding photocatalyzed redox interactions between Fe(III)–(oxyhydr)oxide mineral nanoparticles and adsorbed chromophoric organic matter is critical for accurately predicting bioavailable iron fluxes in the euphotic zone of natural aquatic systems, and for improving the effectiveness of nano-iron-based water purification systems. However, the electron transfer processes that underpin photoreductive dissolution at particle/organic/solution interfaces occur on ultrafast timescales and thus remain difficult to probe. In this work, we report an ultrafast transient absorption spectroscopy (TAS) study of suspensions of hematite nanoplatelets (HNPs) sensitized by adsorbed rhodamine B (RhB) dye as a function of solution media and pH. The TAS results indicate a substantially longer fluorescence lifetime of RhB adsorbed on HNPs across a wide range of pH conditions, consistent with transient photoinduced electron transfer to the oxide with recombination kinetics controlled by electron migration back to the interface via small polaron hopping. Normalization of the observed kinetics to the measured surface loading of RhB at different pH values shows that the recombination rates are insensitive to environmental variables, likely controlled instead by particle properties that determine small polaron diffusion behavior.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Solvation at metal/water interfaces: An ab initio molecular dynamics benchmark of common computational approaches

Determining the influence of the solvent on electrochemical reaction energetics is a central challenge in our understanding of electrochemical interfaces. To date, it is unclear how well existing methods predict solvation energies at solid/liquid interfaces, since they cannot be assessed experimentally. Ab initio molecular dynamics (AIMD) simulations present a physically highly accurate, but also a very costly approach. In this work, we employ extensive AIMD simulations to benchmark solvation at charge-neutral metal/water interfaces against commonly applied continuum solvent models. We consider a variety of adsorbates including *CO, *CHO, *COH, *OCCHO, *OH, and *OOH on Cu, Au, and Pt facets solvated by water. The surfaces and adsorbates considered are relevant, among other reactions, to electrochemical CO 2 reduction and the oxygen redox reactions. We determine directional hydrogen bonds and steric water competition to be critical for a correct description of solvation at the metal/water interfaces. As a consequence, we find that the most frequently applied continuum solvation methods, which do not yet capture these properties, do not presently provide more accurate energetics over simulations in vacuum. We find most of the computed benchmark solvation energies to linearly scale with hydrogen bonding or competitive water adsorption, which strongly differ across surfaces. Furthermore, we determine solvation energies of adsorbates to be non-transferable between metal surfaces, in contrast to standard practice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Comparing GGA, GGA+ U , and meta-GGA functionals for redox-dependent binding at open metal sites in metal–organic frameworks

Metal–organic frameworks (MOFs) with open metal sites have been widely investigated for the selective adsorption of small molecules via redox mechanisms where charge transfer can take place between the binding site and the adsorbate of interest. Quantum-chemical screening methods based on density functional theory have emerged as a promising route to accelerate the discovery of MOFs with enhanced binding affinities toward various adsorbates. However, the success of this approach is linked to the accuracy of the underlying density functional approximations (DFAs). In this work, we compare commonly used generalized gradient approximation (GGA), GGA+U, and meta-GGA exchange-correlation functionals in modeling redox-dependent binding at open metal sites in MOFs using O 2 and N 2 as representative small molecules. We find that the self-interaction error inherent to the widely used Perdew, Burke, and Ernzerhof (PBE) GGA predicts metal sites that are artificially redox-active, as evidenced by their strong binding affinities, short metal–adsorbate bond distances, and large degree of charge transfer. The incorporation of metal-specific, empirical Hubbard U corrections based on the transition metal oxide literature systematically reduces the redox activity of the open metal sites, often improving agreement with experiment. Additionally, the binding behavior shifts from strong chemisorption to weaker physisorption as a function of U. The M06-L meta-GGA typically predicts binding energies between those of PBE-D3(BJ) and PBE-D3(BJ)+U when using empirically derived U values from the transition metal oxide literature. Despite the strong sensitivity of the binding affinities toward a given DFA, the GGA, GGA+U, and meta-GGA approaches often yield the same qualitative trends and structure–property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Characterisation of nano-assemblies inside mesopores using neutron scattering

Adsorption of molecular and nanoscale matter in mesoporous materials is important in filtration and chromatography as well as membrane processes. However, the morphology and distribution of self-assembled structures of adsorbate formed within nanoconfined environments is largely unknown. Small Angle Neutron Scattering (SANS) with porous matrix matching the neutron scattering length density of the solvent has the potential to provide detailed information on the self-assemblies formed in pore spaces. However, analysis of such SANS profiles remains a challenge. In this study, we extend the SANS analysis method previously developed by Findenegg and co-workers to include interparticle correlations, providing a qualitative characterisation of the adsorption state of surfactants and nanoparticles in the cylindrical pores of silica nanomaterials. We find that the pore filling fraction and the self-assembled state of the adsorbate governs the scattering profile. We apply the model to two materials namely, triethyleneglycol monohexyl ether (C 6 E 3 ) surfactant and gold nanoparticles adsorbed in SBA-15 mesoporous silica. In contrast to the C 6 E 3 system, Bragg scattering dominates the diffuse scattering in gold nanoparticle system, which we attribute to the immobile internal structure of the nanoparticles. In conclusion, this new SANS analysis method has potential to elucidate structures of soft matter nanoassemblies inside mesopores.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Pilot testing of CO2 capture from a coal-fired power plant—Part 2: Results from 1-MWe pilot tests

Abstract Using a 1-MWe slipstream pilot plant, solid-sorbent-based post-combustion CO2 capture was tested at a coal-fired power plant. Results from pilot testing were used to develop a preliminary full-scale commercial design. The sorbent selected for pilot-scale evaluation during this project consisted of an ion-exchange resin that incorporated amines covalently bonded to the substrate. A unique temperature-swing-absorption (TSA) process was developed that incorporated a three-stage fluidized-bed adsorber integrated with a single-stage fluidized-bed regenerator. Overall, following start-up and commissioning challenges that are often associated with first-of-a-kind pilots, the pilot plant operated as designed and expected, with a few key exceptions. The two primary exceptions were associated with: (i) handling characteristics of the sorbent, which were sufficiently different at operating temperature than at ambient temperature when design specifications were established with lab-scale testing; and (ii) CO2 adsorption in the transport line between the regenerator and adsorber that preloaded the sorbent with CO2 prior to entering the adsorber. Results from the pilot programme demonstrate that solid-sorbent-based post-combustion capture can be utilized to achieve 90% CO2 capture from coal-fired power plants.

Sjostrom, Sharon↗
DOE OSTI2023

Dielectric screening at TMD:hBN interfaces: Monolayer-to-bulk transition, local-field effect, and spatial dependence

The dielectric effects of a substrate have been shown to be important for modulating the electronic properties of an adsorbate, especially in van der Waals heterostructures. Here, using the first-principles dielectric embedding GW approach within the framework of many-body perturbation theory, we perform a case study on the dielectric screening effects of hexagonal boron nitride (hBN) on various transition-metal dichalcogenides (TMDs). We consider three systems, monolayer MoS 2 , bilayer MoS 2 , and a mixed WS 2 /MoS 2 bilayer adsorbed on hBN, and examine three aspects of the substrate dielectric screening: (i) the thickness dependence and the monolayer-to-bulk transition, for which we consider the effects of one-, two-, three-, and four-layer hBN; (ii) the local-field effect, for which we numerically assess a common approximation of neglecting the in-plane local-field components of the substrate polarizability; and (iii) the spatial dependence, for which we consider the mixed WS 2 /MoS 2 bilayer adsorbed on hBN with either side facing the substrate. Finally, our results provide quantitative insight into how the substrate screening effects can be leveraged for band structure engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Impact of thermodynamic fluctuations and pattern size on the nucleation behavior during area selective deposition

In this work, the authors explore the impact that thermodynamic fluctuations have on the spontaneous appearance of defects during area selective deposition on patterned surfaces that are fully covered by adsorbates under local thermodynamic equilibrium, such as self-assembled monolayers. By using a simple lattice gas model for the adsorbed monolayer, the authors were able to track the spontaneous formation of defects in the monolayer as a function of the pattern width. The results indicate that, for pattern widths of the order of tens of nanometers, roughening effects at the pattern edge can be the leading source for the spontaneous appearance of nucleation defects. This leads to an enhancement of the density of defects that can be up to three orders of magnitude higher than those expected in uniform (not patterned) surfaces. The model also predicts a density of defects that is inversely proportional to the pattern width. Finally, if the dynamic nucleation of defects during area selective deposition is driven by thermodynamic fluctuations, the model predicts that the nucleation rate should be proportional to the total precursor fluency and independent of purge times. Moreover, a tight confinement of the monolayer through a high quality smooth interface in the patterned substrate and strong cohesive interactions between adsorbates should each contribute to a reduction of the overall defect density.

36 MATERIALS SCIENCE↗
DOE OSTI2022

BioSTEAMDevelopmentGroup/Bioindustrial-Park/TAL

Triacetic acid lactone (TAL) can be microbially produced and further chemically upgraded to several high-value chemicals. In this work, several acidic and basic ion-exchange resins and activated charcoal were evaluated for their ability to adsorb microbially produced TAL. Activated charcoal and a weak base resin, Dowex 66, showed similar TAL adsorption capacity of 0.18 ± 0.002 g/g. At 15% w/v activated charcoal, about 98% of TAL present in fermentation broth could be adsorbed. Further, ethanol washing allowed recovery of 72% of adsorbed TAL. A biorefinery producing TAL from sucrose was designed, simulated, and evaluated (through technoeconomic analysis) under uncertainty, for an estimated TAL minimum product selling price (MPSP) of $4.27/kg [$3.71−4.94/kg; 5th-95th percentiles] for the current state of technology and $2.83/kg [$2.46–3.29/kg] following potential near-term improvements to fermentation. Thus, this work provides an adsorptive process to recover microbially produced TAL that can be chemically upgraded to several industrial products.

Cortes-Peña, Yoel↗
DOE OSTI2023

X-ray absorption spectroscopy study of Mn reference compounds for Mn speciation in terrestrial surface environments

Abstract X-ray absorption spectroscopy (XAS) offers great potential to identify and quantify Mn species in surface environments by means of linear combination fit (LCF), fingerprint, and shell-fit analyses of bulk Mn XAS spectra. However, these approaches are complicated by the lack of a comprehensive and accessible spectrum library. Additionally, molecular-level information on Mn coordination in some potentially important Mn species occurring in soils and sediments is missing. Therefore, we investigated a suite of 32 natural and synthetic Mn reference compounds, including Mn oxide, oxyhydroxide, carbonate, phosphate, and silicate minerals, as well as organic and adsorbed Mn species, by Mn K-edge X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopy. The ability of XAS to infer the average oxidation state (AOS) of Mn was assessed by comparing XANES-derived AOS with the AOS obtained from redox titrations. All reference compounds were studied for their local (<5 Å) Mn coordination environment using EXAFS shell-fit analysis. Statistical analyses were employed to clarify how well and to what extent individual Mn species (groups) can be distinguished by XAS based on spectral uniqueness. Our results show that LCF analysis of normalized XANES spectra can reliably quantify the Mn AOS within ~0.1 v.u. in the range +2 to +4. These spectra are diagnostic for most Mn species investigated, but unsuitable to identify and quantify members of the manganate and Mn(III)-oxyhydroxide groups. First-derivative XANES fingerprinting allows the unique identification of pyrolusite, ramsdellite, and potentially lithiophorite within the manganate group. However, XANES spectra of individual Mn compounds can vary significantly depending on chemical composition and/or crystallinity, which limits the accuracy of XANES-based speciation analyses. In contrast, EXAFS spectra provide a much better discriminatory power to identify and quantify Mn species. Principal component and cluster analyses of k2-weighted EXAFS spectra of Mn reference compounds implied that EXAFS LCF analysis of environmental samples can identify and quantify at least the following primary Mn species groups: (1) Phyllo- and tectomanganates with large tunnel sizes (2 × 2 and larger; hollandite sensu stricto, romanèchite, todorokite); (2) tectomanganates with small tunnel sizes (2 × 2 and smaller; cryptomelane, pyrolusite, ramsdellite); (3) Mn(III)-dominated species (nesosilicates, oxyhydroxides, organic compounds, spinels); (4) Mn(II) species (carbonate, phosphate, and phyllosilicate minerals, adsorbed and organic species); and (5) manganosite. All Mn compounds, except for members of the manganate group (excluding pyrolusite) and adsorbed Mn(II) species, exhibit unique EXAFS spectra that would allow their identification and quantification in mixtures. Therefore, our results highlight the potential of Mn K-edge EXAFS spectroscopy to assess bulk Mn speciation in soils and sediments. A complete XAS-based speciation analysis of bulk Mn in environmental samples should preferably include the determination of Mn valences following the “Combo” method of Manceau et al. (2012), EXAFS LCF analyses based on principal component and target transformation results, as well as EXAFS shell-fit analyses for the validation of LCF results. For this purpose, all 32 XAS reference spectra are provided in the Online Materials1 for further use by the scientific community.

Geochemistry & Geophysics↗
DOE OSTI2020

Time-resolved measurement of electron beam neutralization

An intense relativistic electron beam (IREB) incident on a target generates positive ions by stimulated and thermal desorption of adsorbed gas, and subsequent electron impact ionization. These ions are accelerated upstream by the beam space-charge potential, thereby partially neutralizing the beam. If there is enough neutralization, the repulsive space-charge force can be overcome by the magnetic-pinch force due to the beam current. This so-called ion focusing is responsible for time dependent defocusing of the radiographic source spot. Since a single monolayer of adsorbed gas has a surface density of about 10 15 /cm 2 and is formed in about one second in a one micro-Torr vacuum, there is always enough adsorbed gas to make this a concern in our accelerators. Therefore, time-resolved measurements of the degree of neutralization are valuable for better understanding of this process with an eye to mitigation for improvement of our radiography. Moreover, these measurements would aid quantification of uncertainties due to these effects when using invasive beam diagnostics, such as OTR imaging targets.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Mechanistic Understanding of Silver Sorbent Aging Processes in Off-Gas Treatment

The effect of aging in various off-gas streams including dry air, humid air, 1% NO/N 2 , 2% NO 2 /air, and a gas mixture consisting of 99.25% humid air (dew point: -15 °C), 0.25% NO/N 2 , and 0.5% NO 2 /air in terms of concentration on reduced silver exchanged mordenite (Ag 0 Z) and silver functionalized silica aerogel (Ag 0 -aerogel) were studied in this project. Utilizing simple and sophisticated experimental information combined with molecular and macroscopic mechanistic modeling, this project has significantly advanced the current understanding of aging for silver bearing adsorbents in nuclear-fuel-reprocessing off-gas streams. In addition, this project has produced models that can be utilized to predict the influence of adsorbent aging on the uptake kinetics and capacity of aged adsorbents for iodine and iodine-containing organic compounds. The results of the study have been published in the open literature, and can be used to help DOE better predict the removal of radioactive gases from nuclear-fuel-reprocessing off-gas streams.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Initial Assessment of TeF 6 Adsorption

Research and development that supports the management of off-gases from nuclear fuel reprocessing has historically been focused on the off-gas streams that arise from aqueous reprocessing technology. However, as Gen-IV reactor development pathways move toward deployment, alternative spent nuclear fuel (SNF) processing and disposition pathways have been considered more actively. This work is focused upon aspects of fluoride volatility (FV) processing. The versatility of this method for deployment against multiple types of spent fuel encourages the continued advancement of both the primary separations processes and the secondary processes, including waste treatment, material control and accountability, and engineering designs. Recent work noted that TeF 6 , the most highly volatile fluorinated compound produced during FV processing, did not have a clear abatement technology recommended in the literature. Thus, this work performed scoping tests on activated alumina and copper shot to assess whether they could be used to remove TeF 6 from gas streams that bear F 2 . Previous work on this topic was not well described in the literature and was not performed with excess F 2 in the stream as would be typical of spent fuel processing via FV. To support an understanding of the concentration of TeF 6 contacting the adsorbent beds, a series of preliminary testing identified the TeF 6 production rate and the equilibrium concentration of TeF 6 in the gas stream contacting the adsorbent. Excess F 2 was determined to not affect the ability of activated alumina to remove TeF 6 from the gas stream quickly and completely. A determination of whether excess F 2 affected the distribution depth of Te in the sorbent bed is still pending analysis of the used sorbent. Literature suggests that when activated alumina is near saturation, TeF 6 could migrate from the sorbent bed. Future testing should investigate this possibility. Copper metal did not adsorb TeF 6 in the presence of F 2 across the sorbent temperature range of 50 to 335°C. F 2 was fully removed by the copper bed. Although preliminary thermodynamics would indicate adsorption to be energetically favorable, other factors that impact adsorption (e.g., slow kinetics, excess fluorine on the copper surface, an unfavorable transition state) are likely preventing the adsorption of TeF 6 at an easily measurable rate. The work also investigated TeF 6 production from multiple forms of Te in the temperature range of 100 to 250°C. No previous study had assessed the initial reaction rates for this process. A carefully designed study allowed determination of the activation energy for the production of TeF 6 from Te metal. The substantial amount of data collected during this study merits analysis beyond what is described here. A more in-depth kinetic analysis will be pursued. Additional analytical results will provide the ability to benchmark adsorption coefficients for TeF 6 , understand the distribution of TeF 6 within the alumina bed, and better understand the effect of F 2 partial pressure on Te fluorination. The data from this report, as supplemented by these additional analyses, will be submitted to a peer-reviewed journal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Laboratory Evaluation to Increase Effectiveness of Field-Scale Soil Flushing in the Hanford 100 Areas

This laboratory study was initiated to develop an improved technical understanding of the key controlling geochemical and physical processes of mobilizing residual Cr(VI) in Hanford sediments to provide increased effectiveness in soil flushing activities planned for Hanford 100 Areas. This was accomplished by (1) quantifying Cr mass, release rate, and surface phase changes as Cr is leached from different Hanford sediments; (2) maximizing Cr leaching during soil flushing by evaluating different leach solutions and leach strategies; and (3) minimizing leaching of remaining residual Cr after soil flushing ends. To quantify geochemical controls on Cr leaching from sediments, sequential liquid extractions were used to identify aqueous, adsorbed, and solid Cr surface phases (precipitates or Cr incorporated into other phases) before and after water-saturated and unsaturated leach experiments with pH 8 artificial groundwater and with other amendment solutions. Changes in the Cr release rate from sediments were also correlated to changes in Cr surface phases. During unsaturated infiltration, water advection occurs primarily through larger pores, with less movement through smaller grain layers leading to a slower release of Cr trapped in smaller pores next to smaller grains. To quantify these physical controls on Cr leaching from sediments, 10 ft high 1-D infiltration experiments were conducted at differing leach solution application rates, and Cr leaching during application and subsequent residual water flow was quantified. Qualitative 2-D experiments were also conducted to evaluate surfactant addition to increase flow in low-permeability zones. Cr-contaminated Hanford sediments from the 100-H, 100-K, 100-D, and 200 East Areas exhibited a wide variety of leach behavior from rapid release of a small amount of Cr to fast (i.e., minutes) and slow (i.e., hours or more) release of high Cr. Sediments with low labile Cr (< 0.2 µg/g) exhibited fast Cr release but less overall release, and most (>95%) leached from the sediments within a few pore volumes in water-saturated columns. With nearly no sorption of chromate, aqueous and sorbed Cr (as chromate) were released quickly from sediment within the first few pore volumes, resulting in high leach concentrations, fast initial Cr release rates, and changes in pre- and post-leach extractions. In contrast, sediments with high labile Cr (0.2 to 20 µg/g) exhibited a combination of fast and slow Cr release due to multiple Cr surface phases contributing to Cr release from the sediment at different rates with greater overall release. This resulted in elevated Cr effluent concentrations even after dozens of pore volumes were leached. In addition, the Cr release rate decreased with increasing time during leaching. A decrease in labile Cr (aqueous Cr, adsorbed Cr, pH 5 acetate dissolved precipitates) in post-leach extractions compared to pre-leach extractions showed initial aqueous and adsorbed Cr release, followed by dissolution of high-solubility precipitates such as CaCrO 4 (if present), then slow dissolution of calcite that may contain some chromate and possibly BaCrO 4 . The labile Cr in all sediments correlated well with the Cr release rate (r 2 = 0.81). Labile Cr also correlated well with the leached mass in water-saturated columns (r 2 = 0.98), and therefore can be used for prediction of potential removal with flushing applications.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗