Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Influence of powder metallurgy route on precipitation processes in MgTbNd alloy

Solution treated MgTb3Nd2 alloy (nominal composition in wt.%) (ST) and the alloy prepared by hot extrusion of isostatically pressed powder (PM) were isochronally heat treated and studied by electrical resistivity and hardness measurements and by differential scanning calorimetry. Microstructure development was investigated in transmission electron microscopy. Successive precipitation of transient phases in the sequence β″ (D0{sub 19} plates) → β′(cbco) → β{sub 1} (Mg{sub 3}Gd type, fcc) → β (Mg{sub 5}Gd type, fcc) known from the ST alloy was identified also in the PM alloy. The early precipitation stage (D0{sub 19} clusters) revealed in the ST alloy as well as precipitation of equilibrium β{sub e} phase Mg{sub 41}(Tb,Nd){sub 5} manifest themselves only slightly in the PM alloy. Powder metallurgy route does not change the values of activation energies but shifts the temperature ranges of these processes. Vickers hardness of the as prepared state is higher in the PM alloy and is very resistant against the heat treatment up to 510 °C. Contrary to the ST alloy precipitation due to isochronal annealing does not lead to pronounced hardness changes in the PM alloy. - Highlights: • Powder metallurgy (PM) does not change precipitation sequence in MgTbNd alloy. • Temperature ranges of transient phase precipitations are shifted in PM alloy. • Hardness is resistant against isochronal heat treatment up to 510 °C in the PM alloy. • PM procedure does not change activation energies of precipitation.

36 MATERIALS SCIENCE↗

New Family of Argyrodite Thioantimonate Lithium Superionic Conductors

We report on a new family of argyrodite lithium superionic conductors, as solid solutions Li 6+x MxSb 1–x S 5 I (M = Si, Ge, Sn), that exhibit superionic conductivity. These represent the first antimony argyrodites to date. Exploration of the series using a combination of single crystal X-ray and synchrotron/neutron powder diffraction, combined with impedance spectroscopy, reveals that an optimal degree of substitution (x), and substituent induces slight S 2– /I – anion site disorder—but more importantly drives Li + cation site disorder. The additional, delocalized Li-ion density is located in new high energy lattice sites that provide intermediate interstitial positions (local minima) for Li + diffusion and activate concerted ion migration, leading to a low activation energy of 0.25 eV. Excellent room temperature ionic conductivity of 14.8 mS·cm –1 is exhibited for cold-pressed pellets—up to 24 mS·cm –1 for sintered pellets—among the highest values reported to date. This enables all-solid-state battery prototypes that exhibit promising properties. Furthermore, even at -78 °C, suitable bulk ionic conductivity of the electrolyte is retained (0.25 mS·cm –1 ). Selected thioantimonate iodides demonstrate good compatibility with Li metal, sustaining over 1000 h of Li stripping/plating at current densities up to 0.6 mA·cm –2 . The significantly enhanced Li ion conduction and lowered activation energy barrier with increasing site disorder reveals an important strategy toward the development of superionic conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Leaching Kinetics of Rare Earth Elements from Fire Clay Seam Coal

Recovery of rare earth elements (REEs) from coal samples collected from the Fire Clay coal seam using diluted mineral acid solutions was investigated. The initial processing step was coal recovery using conventional froth flotation which concentrated the REEs in tailing material resulting in an upgrade to values around 700 ppm on a dry whole mass basis. Leaching experiments were performed on the flotation tailings material using a 1.2 M sulfuric acid solution adjusted to a temperature of 75 °C to study the extractability of REEs from coal material. The effect of particle size, leaching time, leaching temperature, and solid concentration on REE leaching recovery were evaluated. The kinetic data obtained from leaching over a range of temperatures suggested that the leaching process follows the shrinking core model with possibly a mixed control mechanism that may be a result of several heterogenous materials leaching simultaneously. Leaching recovery increased rapidly at the beginning of the reaction then slowed as the system reached equilibrium. The apparent activation energy determined from test data obtained over a range of temperatures using 1 M sulfuric acid was 36 kJ/mol for the first 20 min of reaction time and 27 kJ/mol for the leaching period between 20 and 120 min. The leaching of light REEs during the initial stage was determined to be driven by a chemical reaction, followed by the formation of a product layer, which required lower activation energy in the later stage of leaching. In regards to the heavy REEs, the major mechanism for leaching is desorption and the product layer formation does not affect the heavy REEs significantly.

58 GEOSCIENCES↗

Review of Dynamic Recovery Effects on Ion Irradiation Damage in Ionic-Covalent Materials

Single crystalline samples of highly ionic Ca2La8(SiO4)6O2 and covalent 6H–SiC have been irradiated with different ions/energies to study the effects of dose, temperature, damage-energy density, and in-cascade ionization rate on the dynamics of irradiation-induced amorphization. Above temperatures of 100–150 K, the dose for complete amorphization, D, increases with temperature in a single stage and exhibits a strong dependence on the ratio of in-cascade recovery to displacement cross sections, σr/σd. A fit of a dynamic model for amorphization to these data indicates that irradiation-induced dynamicrecovery occurs with an activation energy of 0.15 ± 0.02 and 0.12 ± 0.01 eV for Ca2La8(SiO4)6O2 and 6H–SiC, respectively. Analysis of these data reveals that ionization processes are the dominant contributor to in-cascade recovery in Ca2La8(SiO4)6O2; while in 6H–SiC, ionization processes are less dominant.

Environmental Molecular Sciences Laboratory↗

Microstructure, strengthening mechanisms and hot deformation behavior of an oxide-dispersion strengthened UFG Al6063 alloy

An ultrafine-grained Al6063/Al{sub 2}O{sub 3} (0.8 vol.%, 25 nm) nanocomposite was prepared via powder metallurgy route through reactive mechanical alloying and hot powder extrusion. Scanning electron microcopy, transmission electron microscopy, and back scattered electron diffraction analysis showed that the grain structure of the nanocomposite is trimodal and composed of nano-size grains (< 0.1 {mu}m), ultrafine grains (0.1-1 {mu}m), and micron-size grains (> 1 {mu}m) with random orientations. Evaluation of the mechanical properties of the nanocomposite based on the strengthening-mechanism models revealed that the yield strength of the ultrafine-grained nanocomposite is mainly controlled by the high-angle grain boundaries rather than nanometric alumina particles. Hot deformation behavior of the material at different temperatures and strain rates was studied by compression test and compared to coarse-grained Al6063 alloy. The activation energy of the hot deformation process for the nanocomposite was determined to be 291 kJ mol{sup -1}, which is about 64% higher than that of the coarse-grained alloy. Detailed microstructural analysis revealed that dynamic recrystallization is responsible for the observed deformation softening in the ultrafine-grained nanocomposite. - Highlights: Black-Right-Pointing-Pointer The strengthening mechanisms of Al6063/Al{sub 2}O{sub 3} nanocomposite were evaluated. Black-Right-Pointing-Pointer Hot deformation behavior of the nanocomposite was studied. Black-Right-Pointing-Pointer The hot deformation activation energy was determined using consecutive models. Black-Right-Pointing-Pointer The restoration mechanisms and microstructural changes are presented.

36 MATERIALS SCIENCE↗

Effect of sintering in ball-milled K{sub 2}Bi{sub 8}Se{sub 13} thermoelectric nano-composites

K{sub 2}Bi{sub 8}Se{sub 13} has many attractive features for thermoelectric applications. Recently, K{sub 2}Bi{sub 8}Se{sub 13}-based nanocomposite materials, consisting of nano-crystalline, micro-crystalline and amorphous phases, have been fabricated based on powder technology techniques. The Seebeck coefficient has been enhanced while the thermal conductivity has been decreased presenting, thus, interesting behavior. The behavior of the materials under heat treatment conditions is now of interest, as the application of sintering process is necessary for the development of thermoelectric modules. In this work, the crystallization of the K{sub 2}Bi{sub 8}Se{sub 13}-based nano-composites is studied using Differential Scanning Calorimetry. The results show that crystallization follows a multiple-step process with different activation energies. The thermoelectric properties are also discussed in the range that crystallization occurs. - Graphical Abstract: {beta}-K{sub 2}Bi{sub 8}Se{sub 13}-based nanocomposites follow a multiple-step crystallization process. Highlights: Black-Right-Pointing-Pointer K{sub 2}Bi{sub 8}Se{sub 13}-based composites consisting of nanocrystalline and amorphous phases. Black-Right-Pointing-Pointer Sintering results multiple-step crystallization with variable activation energies. Black-Right-Pointing-Pointer Thermoelectric properties follow a step-like behavior during sintering. Black-Right-Pointing-Pointer Properties are attributed to the strain relaxation, nucleation and grain growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-temperature deformation behavior and microstructural characterization of high-Mn bearing titanium-based alloy

Highlights: • The hot deformation behavior of a biomedical low-cost Ti-10Mn alloys was studied. • The flow curves of the alloy display periodic serrations attributed to dynamic strain aging. • Mn alloying increases the activation energy to 243 kJ/mol compared to pure Ti. • The dynamic recovery is more effective than dynamic recrystallization at hot deformation. - Abstract: Ti-Mn alloys exhibit an excellent potential for biomedical applications as well as structural engineering applications, especially in the aerospace industry. In order to control and enhance grain structure during the manufacturing of Ti-Mn alloys and thereby help to enhance mechanical properties such as strength and toughness, we studied the hot-deformation behavior of βTi-10Mn alloys. Isothermal compression tests were conducted in the strain rate range of 0.01–10 s{sup −1} and temperatures in the range of 850–1000 °C using a Gleeble thermomechanical simulator. High-temperature flow stress curves exhibited discontinuous yielding and pronounced periodic serrations without any strain hardening during compression straining of these alloys. Such peculiar behavior of this alloy is due to active dynamic strain aging in its β-bcc structure. Metallographic observations by electron-backscattered diffraction (EBSD) analysis revealed that dynamic recovery (DRV) is more active than continuous dynamic recrystallization (CDRX) when the alloy is deformed at high strain rates, i.e. higher than 1 s{sup −1}. Furthermore, the constitutive behavior of the alloy was modeled and the apparent hot-deformation activation energy of the alloy was estimated to be 243 kJ/mol, which is ~60% higher than the self-diffusion energy in pure titanium.

36 MATERIALS SCIENCE↗

Re-Examination of the N 2 O + O Reaction

The reaction of N 2 O with O is a key step in consumption of nitrous oxide in thermal processes. It has two product channels, NO + NO (R2) and N 2 + O 2 (R3). The rate constant for R2 has been measured both in the forward and the reverse direction at elevated temperature and is well established. However, the rate constant for the N 2 + O 2 channel (R3) has been difficult to quantify and has significant error limits. Here, the direct reaction on the triplet surface has a barrier of around 40 kcal mol –1 , and it is too slow for the N 2 + O 2 channel to have any practical significance. Recently, Pham and Lin (2022) suggested an alternative low activation energy reaction path that involves intersystem crossing and reaction on the singlet surface. In the present work, we re-examined a wide range of experiments relevant for the N 2 O + O reaction through kinetic modeling, paying attention to the impact of artifacts such as impurities and surface reactions. Experimental results from shock tubes and batch reactors on the final NO yield in N 2 O decomposition, covering temperatures of 973–2200 K and pressures of 0.013–11.5 atm, support k 3 ~ 0, consistent with the high activation energy for reaction on the triplet surface and a low probability of ISC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanically Accelerated Depolymerization of Entangled Linear Polymer Melts

Mechanical forces can enhance the chemical depolymerization of synthetic polymers when shear flow accelerates chain scission. To quantify the extent of mechanically-accelerated scission, the effect of simple shear flow (duration and strength) with low Weissenberg and Deborah numbers was investigated by considering the impact of applied work in both simple shear and shear dominated mixed flows. Hydrogenated polyisoprene was chosen as a model linear, entangled system. The conditions (strain amplitude, frequency, and shearing time) necessary to increase chain scission were assessed in the rubbery melt. Shear flow accelerated chain scission at higher temperatures, suggesting an activated process. Isothermal scission versus work curves were superposed by applying shift factors a T,S , whose Arrhenius-like temperature dependence gave an apparent activation energy for chain scission of ~ 110 kJ/mol, which is likely a combination of the activation energy of viscosity and bond energy. This work provides a base for quantifying the impact of shear on depolymerization of polymer melts and highlight the connection between viscous dissipation and scission chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature Environment for 9975 Packages Stored in KAC

Plutonium materials are stored in the K Area Complex (KAC) in shipping packages, typically the 9975 shipping package. In order to estimate realistic degradation rates for components within the shipping package (i.e. the fiberboard overpack and O-ring seals), it is necessary to understand actual facility temperatures, which can vary daily and seasonally. Relevant facility temperature data available from several periods throughout its operating history have been reviewed. The annual average temperature within the Crane Maintenance Area has ranged from approximately 70 to 74 °F, although there is significant seasonal variation and lesser variation among different locations within the facility. The long-term average degradation rate for 9975 package components is very close to that expected if the component were to remain continually at the annual average temperature. This result remains valid for a wide range of activation energies (which describes the variation in degradation rate as the temperature changes), if the activation energy remains constant over the seasonal range of component temperatures. It is recommended that component degradation analyses and service life estimates incorporate these results. Specifically, it is proposed that future analyses assume an average facility ambient air temperature of 94 °F. This value is bounding for all packages, and includes margin for several factors such as increased temperatures within the storage arrays, the addition of more packages in the future, and future operational changes.

36 MATERIALS SCIENCE↗

Interdiffusion between the L1(2) trialuminides Al66Ti25Mn9 and Al67Ti25Cr8

Concentration-distance profiles obtained from Al66Ti25Mn9/Al67Ti25Cr8 diffusion couples are used to determine the interdiffusion coeffients in the temperature range 1373-1073 K. The couples are treated as pseudobinaries, and the diffusion coefficients are determined using the Matano approach. The results are then used to compute the activation energies for diffusion, and a comparison is made with some existing data for the activation energy for creep of Al22Ti8Fe3.

Kumar, K. S.↗

Kinetics Of Isomerisation Reaction Of Oriented Polyacetylene Induced By Laser

The impact of a laser's photons ({lambda} = 514.5 nm) on the surface of polyacetylene films (PA), composed of macromolecules PAcis and PAtrans produces simultaneously thermal and Raman diffusion [1]. The thermal effect initializes the isomerization of macromolecules PAcis to PAtrans [2]; this reaction is exothermic. Samples are polyacetylene oriented films synthesized horizontally or vertically in cis configuration and are subject to different laser powers during intervals of time which vary between 20 s and 250 s. The power (P ({lambda}), mW) of the laser is equivalent to the temperature T, of isomerization [3]. Isotherms are constructed and are characterized by the laser power applied. We have established theoretical models calculations with the aim of determining the kinetic parameters of the reaction of isomerization: the activation energy (Ea), the frequency factor of Arrhenius (A), and the rate constant (k). We concluded that even in the field of seconds, the isomerization is a complex process different from a reaction of order: 1, 7/10, 2/3, 3/5, 1/2, 2/5 and 1/4. The order 2/3 being the most suitable. The study determined, among others, the rate constants k 2/3 (T)(of the order 2/3 of the isomerization reaction)= 0.003337244, 0.0052149, 0.0209636, 0.043727 s-1 respectively for Laser powers 30, 120, 200 and 300 mW; activation energy 17.7844 kcal/mol and a factor of collision 19.066816 10{sup 6} s{sup -1}. These results are found to be close to the experimental results studied.

36 MATERIALS SCIENCE↗

Degradation of (InAlGa)N-based UV-B light emitting diodes stressed by current and temperature

The degradation of the electrical and optical properties of (InAlGa)N-based multiple quantum well light emitting diodes (LEDs) emitting near 308 nm under different stress conditions has been studied. LEDs with different emission areas were operated at room temperature and at constant current densities of 75 A/cm{sup 2}, 150 A/cm{sup 2}, and 225 A/cm{sup 2}. In addition, the heat sink temperature was varied between 15 °C and 80 °C. Two main modes for the reduction of the optical power were found, which dominate at different times of operation: (1) Within the first 100 h, a fast drop of the optical power is observed scaling exponentially with the temperature and having an activation energy of about 0.13 eV. The drop in optical power is accompanied by changes of the current-voltage (I-V) characteristic. (2) For operation times beyond 100 h, the optical power decreases slowly which can be reasonably described by a square root time dependence. Here, the degradation rate depends on the current density, rather than the current. Again, the rate of optical power reduction of the second mode depends exponentially on the temperature with an activation energy of about 0.21 eV. The drop in the optical power is accompanied by an increased reverse-bias leakage current.

36 MATERIALS SCIENCE↗

Neutron Spin–Echo Studies of the Structural Relaxation of Network Liquid ZnCl 2 at the Structure Factor Primary Peak and Prepeak

Using neutron spin-echo spectroscopy, we studied the microscopic structural relaxation of a prototypical network ionic liquid ZnCl 2 at the structure factor primary peak and pre-peak. The results show that the relaxation at the primary peak is faster than the pre-peak and the activation energy is ≈33% higher. Stretched exponential relaxation is observed even at temperatures well above the melting point T m . Surprisingly, the stretching exponent shows a rapid increase upon cooling, especially at the primary peak, where it changes from stretched exponential to simple exponential on approaching T m . Furthermore, these results suggest that the appearance of glassy dynamics typical of the supercooled state even in the equilibrium liquid state of ZnCl 2 as well as the difference of activation energy at the two investigated length scales are related to the formation of network structure on cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structural characterization and Li{sup +} ion conductivity of a new vanado-molybdate phase, LiMg{sub 3}VMo{sub 2}O{sub 12}

A new vanado-molybdate LiMg{sub 3}VMo{sub 2}O{sub 12} has been synthesized, the crystal structure determined an ionic conductivity measured. The solid solution Li{sub 2-z}Mg{sub 2+z}V{sub z}Mo{sub 3-z}O{sub 12} was investigated and the structures of the z=0.5 and 1.0 compositions were refined by Rietveld analysis of powder X-ray (XRD) and powder neutron diffraction (ND) data. The structures were refined in the orthorhombic space group Pnma with a{approx}5.10, b{approx}10.4 and c{approx}17.6 A, and are isostructural with the previously reported double molybdates Li{sub 2}M{sub 2}(MoO{sub 4}){sub 3} (M=M{sup 2+}, z=0). The structures comprise of two unique (Li/Mg)O{sub 6} octahedra, (Li/Mg)O{sub 6} trigonal prisms and two unique (Mo/V)O{sub 4} tetrahedra. A well-defined 1:3 ratio of Li{sup +}:Mg{sup 2+} is observed in octahedral chains for LiMg{sub 3}VMo{sub 2}O{sub 12}. Li{sup +} preferentially occupies trigonal prisms and Mg{sup 2+} favours octahedral sheets. Excess V{sup 5+} adjacent to the octahedral sheets may indicate short-range order. Ionic conductivity measured by impedance spectroscopy (IS) and differential scanning calorimetry (DSC) measurements show the presence of a phase transition, at 500-600 {sup o}C, depending on x. A decrease in activation energy for Li{sup +} ion conductivity occurs at the phase transition and the high temperature structure is a good Li{sup +} ion conductor, with {sigma}=1x10{sup -3}-4x10{sup -2} S cm{sup -1} and E{sub a}=0.6 to 0.8 eV. - Graphical abstract: A new vanado-molybdate LiMg{sub 3}VMo{sub 2}O{sub 12} has been synthesized and the crystal structure determined. Ionic conductivity measurements show the presence of a phase transition, at 500-600 {sup o}C. A large decrease in activation energy for Li{sup +} ion conductivity occurs at the phase transition and the high temperature structure is a good Li{sup +} ion conductor. Display Omitted

36 MATERIALS SCIENCE↗

The relationship between reorientational molecular motions and phase transitions in [Mg(H{sub 2}O){sub 6}](BF{sub 4}){sub 2}, studied with the use of {sup 1}H and {sup 19}F NMR and FT-MIR

A {sup 1}H and {sup 19}F nuclear magnetic resonance study of [Mg(H{sub 2}O){sub 6}](BF{sub 4}){sub 2} has confirmed the existence of two phase transitions at T{sub c1} ≈ 257 K and T{sub c2} ≈ 142 K, detected earlier by the DSC method. These transitions were reflected by changes in the temperature dependences of both proton and fluorine of second moments M{sub 2}{sup H} and M{sub 2}{sup F} and of spin-lattice relaxation times T{sub 1}{sup H} and T{sub 1}{sup F}. The study revealed anisotropic reorientations of whole [Mg(H{sub 2}O){sub 6}]{sup 2+} cations, reorientations by 180° jumps of H{sub 2}O ligands, and aniso- and isotropic reorientations of BF{sub 4}{sup −} anions. The activation parameters for these motions were obtained. It was found that the phase transition at T{sub c1} is associated with the reorientation of the cation as a whole unit around the C{sub 3} axis and that at T{sub c2} with isotropic reorientation of the BF{sub 4}{sup −} anions. The temperature dependence of the full width at half maximum value of the infrared band of ρ{sub t}(H{sub 2}O) mode (at ∼596 cm{sup −1}) indicated that in phases I and II, all H{sub 2}O ligands in [Mg(H{sub 2}O){sub 6}]{sup 2+} perform fast reorientational motions (180° jumps) with a mean value of activation energy equal to ca 10 kJ mole{sup −1}, what is fully consistent with NMR results. The phase transition at T{sub c1} is associated with a sudden change of speed of fast (τ{sub R} ≈ 10{sup −12} s) reorientational motions of H{sub 2}O ligands. Below T{sub c2} (in phase III), the reorientations of certain part of the H{sub 2}O ligands significantly slow down, while others continue their fast reorientation with an activation energy of ca 2 kJ mole{sup −1}. This fast reorientation cannot be evidenced in NMR relaxation experiments. Splitting of certain IR bands connected with H{sub 2}O ligands at the observed phase transitions suggests a reduction of the symmetry of the octahedral [Mg(H{sub 2}O){sub 6}]{sup 2+} complex cation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular models for creep in oriented polyethylene fibers

Highly oriented and crystalline polyetheylene (PE) fibers have a large failure stress under rapid tensile loading but exhibit significant creep at much smaller stresses that limits applications. A possible mechanism is slip of chains due to stress-enhanced, thermally activated nucleation of dislocations at chain ends in crystalline regions. Molecular dynamics simulations are used to parameterize a Frenkel–Kontorova model that provides analytic expressions for the limiting stress and activation energy for dislocation nucleation as a function of stress. Results from four commonly used hydrocarbon potentials are compared to show that the qualitative behavior is robust and estimate quantitative uncertainties. In all cases, the results can be described by an Eyring model with values of the zero-stress activation energy Ea0≈1.5 eV and activation volume V* ≈ 45 Å3 that are consistent with the experimental results for increasingly crystalline materials. The limiting yield stress is ∼8 GPa. These results suggest that activated dislocation nucleation at chain ends is an important mechanism for creep in highly oriented PE fibers.

O’Connor, Thomas C. (ORCID:0000000293930295)↗

Temperature dependent photoluminescence investigation of the effect of growth pause induced ripening in InAs/GaAs quantum dot heterostructures

Highlights: Black-Right-Pointing-Pointer Self-assembled InAs/GaAs quantum dots were subjected to growth ripening pause. Black-Right-Pointing-Pointer Samples are structurally and optically characterized. Black-Right-Pointing-Pointer Factors affecting the carrier activation energy have been investigated. -- Abstract: Self-assembled InAs/GaAs quantum dot (QD) heterostructures grown by solid state molecular beam epitaxy (MBE) were subjected to growth ripening pause of comparatively shorter durations (0-50 s) at the growth temperature (520 Degree-Sign C). The islands are found to increase in size with the growth pause and correspondingly their density decreases. Though the photoluminescence spectra of the islands subjected to growth pause is found to follow conventional QD systems, a contradiction is noticed in the calculated values of the activation energy of the dots. We ascribed this contradiction due to the poor crystalline quality of the ripened QDs as a result of desorption and sublimation of indium during the pause at high growth temperature.

36 MATERIALS SCIENCE↗