SEARCH · Engineering Papers

Results for “visible light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS2021

Preferential Loss of Yukon River Delta Colored Dissolved Organic Matter under Nutrient Replete Conditions

The Yukon River exports a large amount of dissolved organic carbon (DOC), much of which is colored, absorbing visible and ultraviolet light. Yukon River water typically has low total dissolved nitrogen (TDN), with an average DOC : TDN ratio of 21.1 (mol C mol N−1) ~ 200 km upstream from the coast at Pilot Station, Alaska. TDN has been correlated to the bioavailability of DOC, but a direct estimate of the dependence of DOC reactivity on nutrient availability has not been conducted in the Yukon River delta. The biodegradability of DOC and colored dissolved organic matter (CDOM) was assessed along a gradient within the Yukon River delta and into the coastal ocean. Samples were dark incubated at 20􀀀C and half of the incubations were amended with inorganic nutrients. At ﬁve time points through 27 d, CDOM absorption and DOC concentration were measured. Initial DOC concentration was 113–830 μmol C L−1 and CDOM absorption at 443 nm (a443) ranged from 0.16 to 7.8 m−1 from the ocean to a high CDOM lake. DOC was relatively unreactive, with 3–6% of DOC degrading in riverine samples and little difference between nutrient amended and control incubations. Control river delta a443 decreased 3–10%, while nutrient amended treatments saw a 6–22% decline over 27 d. In the nutrient amended riverine stations, CDOM absorption loss was greater at blue wavelengths and CDOM degradation was greater than total DOC loss. DOC was resistant to biodegradation in both nutrient amended and ambient conditions, while CDOM was preferentially degraded when nutrients were replete.

J Blake Clark↗

NASA NTRS2019

Characterization and Application of Artificial Light Sources for Nighttime Aerosol Optical Depth Retrievals using the Visible Infrared Imager Radiometer Suite Day/Night Band

Using nighttime observations from Visible Infrared Imager Radiometer Suite (VIIRS) Day/Night band (DNB), the characteristics of artificial light sources are evaluated as functions of observation conditions, and incremental improvements are documented on nighttime aerosol retrievals using VIIRS DNB data on a regional scale. We find that the standard deviation of instantaneous radiance for a given artificial light source is strongly dependent upon the satellite viewing angle but is weakly dependent on lunar fraction and lunar angle. Retrieval of nighttime aerosol optical thickness (AOT) based on the novel use of these artificial light sources is demonstrated for three selected regions (United States, Middle East and India) during 2015. Reason-able agreement is found between nighttime AOTs from the VIIRS DNB and temporally adjacent daytime AOTs from the AErosol RObotic NETwork (AERONET) as well as from coincident nighttime AOT retrievals from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), indicating the potential of this method to begin filling critical gaps in diurnal AOT information at both regional and global scales. Issues related to cloud, snow and ice contamination during the winter season, as well as data loss due to the misclassification of thick aerosol plumes as clouds, must be addressed to make the algorithm operationally robust.

Jianglong Zhang↗

NASA NTRS1993

Using APART for wall visibility calculations in the calibration channel of wide field planetary camera II

The cone visibility from the CCD detector array plane in the calibration channel of wide field planetary camera II (WFPC II) is analyzed, using APART, for three representative wavelengths as characterized by indices of refraction. The light pipe walls are visible from the corners of the equivalent CCD detector array when imaging with the smallest index of refraction, n = 1.375. Painting the inside of the light pipe walls will result in a decrease in their visibility.

Scholl, James W.↗

NASA NTRS1991

CCD photometry of 2060 Chiron, 1991 January

Observations of 2060 Chiron was performed on 7 to 8 Jan. 1991 with the Mt. Palomar 1.52 m telescope in the Gunn-R passband. On-chip field stars were used to perform differential reductions. The repeatability of the 5.9 hour light curve was excellent, both within a night and from night to night. No evidence for short-term secular variations similar to those seen last year by both Luu and Jewitt (1990) and Buratti and Dunbar (1991) is seen in the new light curve. Chiron's rotational light curve appears strikingly similar to that obtained a year earlier by Luu and Jewitt (1990), both in amplitude and shape. Both light curves show strongly correlated changes over a timescale of perhaps 15 minutes. These same features were marginally visible in the 1986 light curve. Such behavior is believed to be evidence that Chiron may be more aspherical than the 4 percent intensity variation might otherwise indicate, and favors a viewing geometry where the subearth latitude is rather low. Chiron was much fainter in 1985, when a partial light curve was obtained by Marcialis. Due to the lower sampling rate of these early data, no conclusions can be made regarding the high-frequency light curve structure back then. All three of these light curves differ significantly from that obtained by Buratti and Dunbar (1991), one week before the observations of Luu and Jewitt. The Chiron field was calibrated using Landolt standards on Ut 15 Mar. 1991. A mean R-magnitude of 15.6 + or - 0.1 was found. Variability of 2060 Chiron was demonstrated over timescales of minutes, hours, and years. An intense campaign was urged to monitor the photometric behavior of Chiron throughout the 1990s.

Buratti, B. J.↗

NASA NTRS1971

Variable X-ray sources.

The behavior of the quasi-periodic rapid variable Cyg X-1, the periodic variable Cen X-3, and the aperiodic variable Sco X-1 is described. Observations of Cyg X-1 were made by pointing the Uhuru satellite to a position where the object was in the band visible to the X-ray detectors; observations were also obtained by other methods. It appears that the X-ray emitting region is a few light sec in size, and some of the fast variations originate in a region as small as several earth radii in size. It is believed at present that a pulsating white dwarf could explain the X-ray behavior of Cen X-3. X-ray data from Sco X-1 reveal that it behaves in soft X rays much as it is well known to do in visible light.

Kellogg, E. M.↗

NASA NTRS2011

Volumetric 3D Display System with Static Screen

Current display technology has relied on flat, 2D screens that cannot truly convey the third dimension of visual information: depth. In contrast to conventional visualization that is primarily based on 2D flat screens, the volumetric 3D display possesses a true 3D display volume, and places physically each 3D voxel in displayed 3D images at the true 3D (x,y,z) spatial position. Each voxel, analogous to a pixel in a 2D image, emits light from that position to form a real 3D image in the eyes of the viewers. Such true volumetric 3D display technology provides both physiological (accommodation, convergence, binocular disparity, and motion parallax) and psychological (image size, linear perspective, shading, brightness, etc.) depth cues to human visual systems to help in the perception of 3D objects. In a volumetric 3D display, viewers can watch the displayed 3D images from a completely 360 view without using any special eyewear. The volumetric 3D display techniques may lead to a quantum leap in information display technology and can dramatically change the ways humans interact with computers, which can lead to significant improvements in the efficiency of learning and knowledge management processes. Within a block of glass, a large amount of tiny dots of voxels are created by using a recently available machining technique called laser subsurface engraving (LSE). The LSE is able to produce tiny physical crack points (as small as 0.05 mm in diameter) at any (x,y,z) location within the cube of transparent material. The crack dots, when illuminated by a light source, scatter the light around and form visible voxels within the 3D volume. The locations of these tiny voxels are strategically determined such that each can be illuminated by a light ray from a high-resolution digital mirror device (DMD) light engine. The distribution of these voxels occupies the full display volume within the static 3D glass screen. This design eliminates any moving screen seen in previous approaches, so there is no image jitter, and has an inherent parallel mechanism for 3D voxel addressing. High spatial resolution is possible with a full color display being easy to implement. The system is low-cost and low-maintenance.

Geng, Jason↗

NASA NTRS1975

Investigation of laser dynamics, modulation and control by means of intra-cavity time varying perturbation

The generation of tunable visible, infrared, and ultraviolet light is examined, along with the control of this light by means of novel mode-locking and modulation techniques. Transient mode-locking of the Nd:YAG laser and generation of short tunable pulses in the visible and the alkali metal inert gas excimer laser systems were investigated. Techniques for frequency conversion of high power and high energy laser radiation are discussed, along with high average power blue and UV laser light sources.

Harris, S. E.↗

NASA NTRS2000

Under the Weather: Space Weather. The Magnetic Field of the Heliosphere

Normally, only people in the far north can enjoy the dancing beauty of the aurora borealis; however, an intense collision of charged solar particles with the Earth's magnetic field can magnify the Northern Lights so much that they are visible in the southern United States. Behind the light show lies enough flux of energetic particles carried by solar wind to render our planet uninhabitable. The Earth's magnetic field, also known as the magnetosphere, is the only thing that shields us from the Sun. Even the magnetosphere cannot fully guard us from the wrath of the Sun. In March 1989, a powerful solar flare hit Earth with such energy that it burned out transformers in Quebec's electrical grid, plunging Quebec and the eastern United States into darkness for more than 9 hours. Northern lights and energy grid overloads are not the only ways that a solar wind can affect us. A solar storm in July 1999 interrupted radio broadcasts. Solar activity can disorient radars and satellite sensors, break up cell phone connections, and threaten the safety of astronauts. A large bombardment of solar particles can even reduce the amount of ozone in the upper atmosphere. Magnetohydrodynamics (MHD), the study of magnetic fields in magnetized plasmas, can help scientists predict, and therefore prepare for, the harmful side effects of solar weather in the magnetosphere.

Roberts, Aaron↗

NASA NTRS2021

Quantifying the Impacts of PM2.5 Constituents and Relative Humidity on Visibility Impairment in a Suburban Area of Eastern Asia Using Long-Term In-Situ Measurements.

The deterioration of visibility due to air pollutants and relative humidity has been a serious environmental problem in eastern Asia. In most previous studies, chemical compositions of atmospheric particles were provided using filter-based offline analyses, which were unable to provide long-term and in-situ measurements that resolve sufficient temporal variations of air pollution and meteorology, hindering the resolution of the relationship between air quality and visibility. Here, we present a year-long continuously measured data from a comprehensive suite of online instruments to investigate diurnal and seasonal impacts of the aerosol chemical compositions in PM2.5 on visibility seasonally and diurnally. The measured dry aerosol extinction at λ = 550 nm reached a closure with that predicted by aerosol compositions within 12%. However, the hygroscopic growth of particles under ambient RH could enhance the aerosol extinction by a factor of 2 – 6, matching the perceptive visibility of the public. Particulate ammonium nitrate was most sensitive to reducing visibility, while ammonium sulfate contributed the most to the light extinction. In spring and winter, the monsoon and stagnant air masses reduced the visibility and increased PM2.5 (> 35 μg m-3).The moisture was found to substantially enhance the light extinction under RH = 60 – 90%,reducing visibility by approximately 15 km, largely attributed to hygroscopic inorganic salts.This study serves as a metric to highlight the need to consider the influence of RH, and aqueous reactions in producing secondary inorganic aerosols on atmospheric visibility, underpinning the more accurate mitigation strategies of air pollution.

visibility↗

NASA NTRS1966

Fluorescent origin of the light from a supernova outburst.

Visible spectrum of radiation release from type I supernova outburst

SUPERNOVA↗

NASA NTRS2017

Upgrades and Modifications of the NASA Ames HFFAF Ballistic Range

The NASA Ames Hypervelocity Free Flight Aerodynamics Facility ballistic range is described. The various configurations of the shadowgraph stations are presented. This includes the original stations with film and configurations with two different types of digital cameras. Resolution tests for the 3 shadowgraph station configurations are described. The advantages of the digital cameras are discussed, including the immediate availability of the shadowgraphs. The final shadowgraph station configuration is a mix of 26 Nikon cameras and 6 PI-MAX2 cameras. Two types of trigger light sheet stations are described visible and IR. The two gunpowders used for the NASA Ames 6.251.50 light gas guns are presented. These are the Hercules HC-33-FS powder (no longer available) and the St. Marks Powder WC 886 powder. The results from eight proof shots for the two powders are presented. Both muzzle velocities and piston velocities are 5 9 lower for the new St. Marks WC 886 powder than for the old Hercules HC-33-FS powder (no longer available). The experimental and CFD (computational) piston and muzzle velocities are in good agreement. Shadowgraph-reading software that employs template-matching pattern recognition to locate the ballistic-range model is described. Templates are generated from a 3D solid model of the ballistic-range model. The accuracy of the approach is assessed using a set of computer-generated test images.

Ballistic Range↗

NASA NTRS2017

Upgrades and Modifications of the NASA Ames HFFAF Ballistic Range

Ballistic Range↗

NASA NTRS2012

Radio Frequency Plasma Discharge Lamps for Use as Stable Calibration Light Sources

Stable high radiance in visible and near-ultraviolet wavelengths is desirable for radiometric calibration sources. In this work, newly available electrodeless radio-frequency (RF) driven plasma light sources were combined with research grade, low-noise power supplies and coupled to an integrating sphere to produce a uniform radiance source. The stock light sources consist of a 28 VDC power supply, RF driver, and a resonant RF cavity. The RF cavity includes a small bulb with a fill gas that is ionized by the electric field and emits light. This assembly is known as the emitter. The RF driver supplies a source of RF energy to the emitter. In commercial form, embedded electronics within the RF driver perform a continual optimization routine to maximize energy transfer to the emitter. This optimization routine continually varies the light output sinusoidally by approximately 2% over a several-second period. Modifying to eliminate this optimization eliminates the sinusoidal variation but allows the output to slowly drift over time. This drift can be minimized by allowing sufficient warm-up time to achieve thermal equilibrium. It was also found that supplying the RF driver with a low-noise source of DC electrical power improves the stability of the lamp output. Finally, coupling the light into an integrating sphere reduces the effect of spatial fluctuations, and decreases noise at the output port of the sphere.

McAndrew, Brendan↗

NASA NTRS2006

Theodolite Ring Lights

Theodolite ring lights have been invented to ease a difficulty encountered in the well-established optical-metrology practice of using highly reflective spherical tooling balls as position references. A theodolite ring light produces a more easily visible reflection and eliminates the need for an autocollimating device. A theodolite ring light is a very bright light source that is well centered on the optical axis of the instrument. It can be fabricated, easily and inexpensively, for use on a theodolite or telescope of any diameter.

Clark, David↗

NASA NTRS1973

Remote measurement of water color in coastal waters

An investigation was conducted to develop procedure to obtain quantitative values for chlorophyll and turbidity in coastal waters by observing the changes in spectral radiance of the backscattered spectrum. The technique under consideration consists of Examining Exotech model 20-D spectral radiometer data and determining which radiance ratios best correlated with chlorophyll and turbidity measurements as obtained from analyses of water samples and sechi visibility readings. Preliminary results indicate that there is a correlation between backscattered light and chlorophyll concentration and secchi visibility. The tests were conducted with the spectrometer mounted in a light aircraft over the Mississippi Sound at altitudes of 2.5K, 2.8K and 10K feet.

Weldon, J. W.↗

NASA NTRSDate not supplied

Corrected Recursive Equations for Vane Aperture Sizes and Locations in One- and Two-Stage Stray Light Baffle Systems

Front-end stray light baffles for optical imaging systems are used to limit the amount of out-of-field light that reaches the entrance pupil of the optical system. From star tracker baffles to the outer barrel of the Hubble Space Telescope, it is vital to design the locations and apertures of baffle vanes so that the inner walls of the baffle are not simultaneously visible to both stray light sources and the optical entrance pupil. Various designs have been presented for arbitrary cylindrical baffle tubes and explicitly specified conical tubes, but no working generalized algorithm has been presented where the baffle tube can take an arbitrary conical form. Haghshenas and Johari presented what should be a working recursive algorithm, but the published equations have two errors that result in incorrect output. Corrections to their equations are presented here. Additionally, tolerancing in the field of baffle design has typically been accomplished by slightly increasing the field-of-view of the baffle system to avoid clipping the optical field due to mechanical tolerance errors. A new way of incorporating fabrication, alignment, and environmental tolerancing is presented that is more consistent with typical mechanical engineering practice. Furthermore, it is included in the recursive equations with some demonstration of their impact.

tolerance↗

NASA NTRSDate not supplied

Corrected Recursive Equations for Vane Aperture Sizes and Locations in One- and Two-Stage Stray Light Baffle Systems

Front-end stray light baffles for optical imaging systems are used to limit the amount of out-of-field light that reaches the entrance pupil of the optical system. From star tracker baffles to the outer barrel of the Hubble Space Telescope, it is vital to design the locations and apertures of baffle vanes so that the inner walls of the baffle are not simultaneously visible to both stray light sources and the optical entrance pupil. Various designs have been presented for arbitrary cylindrical baffle tubes and explicitly specified conical tubes, but no working generalized algorithm has been presented where the baffle tube can take an arbitrary conical form. Haghshenas and Johari presented what should be a working recursive algorithm, but the published equations have two errors that result in incorrect output. Corrections to their equations are presented here. Additionally, tolerancing in the field of baffle design has typically been accomplished by slightly increasing the fieldof-view of the baffle system to avoid clipping the optical field due to mechanical tolerance errors. A new way of incorporating fabrication, alignment, and environmental tolerancing is presented that is more consistent with typical mechanical engineering practice and margin against those fabrication errors is included in the recursive equations with demonstration of their benefit.

Stray light↗

NASA NTRS2005

Sol-Gel Glass Holographic Light-Shaping Diffusers

Holographic glass light-shaping diffusers (GLSDs) are optical components for use in special-purpose illumination systems (see figure). When properly positioned with respect to lamps and areas to be illuminated, holographic GLSDs efficiently channel light from the lamps onto specified areas with specified distributions of illumination for example, uniform or nearly uniform irradiance can be concentrated with intensity confined to a peak a few degrees wide about normal incidence, over a circular or elliptical area. Holographic light diffusers were developed during the 1990s. The development of the present holographic GLSDs extends the prior development to incorporate sol-gel optical glass. To fabricate a holographic GLSD, one records a hologram on a sol-gel silica film formulated specially for this purpose. The hologram is a quasi-random, micro-sculpted pattern of smoothly varying changes in the index of refraction of the glass. The structures in this pattern act as an array of numerous miniature lenses that refract light passing through the GLSD, such that the transmitted light beam exhibits a precisely tailored energy distribution. In comparison with other light diffusers, holographic GLSDs function with remarkably high efficiency: they typically transmit 90 percent or more of the incident lamp light onto the designated areas. In addition, they can withstand temperatures in excess of 1,000 C. These characteristics make holographic GLSDs attractive for use in diverse lighting applications that involve high temperatures and/or requirements for high transmission efficiency for ultraviolet, visible, and near-infrared light. Examples include projectors, automobile headlights, aircraft landing lights, high-power laser illuminators, and industrial and scientific illuminators.

Yu, Kevin↗