Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vertical velocities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Turbulence measurements using tethered balloon instrumentation during FIRE 1987

As part of the surface-based observations conducted on San Nicolas Island, the U.K. Meteorological Office operated a set of turbulence probes attached to a balloon tether cable. Typically six probes were used, each capable of measuring momentum, heat, and humidity fluxes. Two probes were fitted with net radiometers, one positioned above cloud and the other below; a third probe carried a Lyman-alpha hygrometer fitted with a pre-heater for the measurement of total water content. Some preliminary results are presented from the 14th July describing the variation in structure of the cloudy boundary layer during the daytime. This day was characterized by a complete cloud cover, an inversion height of approximately 600 m. and north-westerly winds of approximately 6 m.s(-1). As an illustration the equivalent potential temperature derived from a profile ascent made between approximately 0830 and 0930 (PDT) is shown. The data has been smoothed to a height resolution of about 4 metres. At this time the cloud base was approximately 200 m. and very light drizzle was reaching the surface. The vertical velocity variance and potential temperature flux for two periods are shown; the first (shown by full lines) immediately follows the profile and the second (shown by dashed lines) is central around 1400 (PDT). The data have been normalized by their maximum values in the first period. Cloud base has now risen to approximately 300 m. There is a marked variation during the morning, particularly in sigma w. The net radiative flux above cloud top has by now reached its maximum value.

Hignett, Phillip↗

An overview of UK C130 observations from the FIRE marine stratocumulus IFO

An overview of the characteristics of the ten flights made by the C130 during the Intensive Field Observations (IFO) are presented. An indication of data quality is given. Comparisons of the carbon dioxide radiation thermometer and the Rosemount suggest there may be potentially serious wetting problems with the latter, especially close to cloud base. The main features of the cloud layers sampled by the C130 are summarized, including microphysical parameters. Many of the results shown are derived from a first order analysis of turbulence quantities. The gross vertical variation of heat, vapor, and liquid water fluxes from case to case, together with the observed vertical velocity variance, a good indicator of convective activity, are discussed. Preliminary results suggest that the different cases can be usefully categorized using these data. The relationship between these and the measured boundary conditions is mentioned. Similarities and differences between the various cases are highlighted, and interpreted in terms of the researchers' current understanding of stratocumulus. Attention is given to particular features of the various flights which may deserve more intensive study.

Nicholls, S.↗

Research on diabatic initialization

The objective of this research project is to contribute to improvement in the synoptic analyses in the tropics for numerical weather prediction and climate research. In addition to a prediction model, four dimensional data assimilation systems have two principal components. One is objective analysis and the other is initialization. Various methods of objective analysis are designed primarily to analyze the mass and rotational wind fields. Methods of initialization are developed to obtain the irrotational wind and its associated vertical velocity field which are balanced with the mass field and free from meteorological noise. There are essentially three approaches to the problem of initialization: quasi-geostrophic theory, bounded derivative method and nonlinear normal mode method. In the midlatitudes, these approaches generally produce satisfactory results even without diabatic effects for large-scale motions. In the tropics, the situation is quite different from that in the midlatitudes. Because of a small magnitude of the Coriolis parameter and a weak horizontal temperature gradient in the tropics, any method of initialization must incorporate diabatic effects. In fact, it can be said that understanding the problem of diabatic initialization is the key to improving the analysis and weather forecasting in the tropics.

Kasahara, Akira↗

Calibration of the ER-2 meteorological measurement system

The Meteorological Measurement System (MMS) on the high altitude ER-2 aircraft was developed specifically for atmospheric research. The MMS provides accurate measurements of pressure, temperature, wind vector, position (longitude, latitude, altitude), pitch, roll, heading, angle of attack, angle of sideslip, true airspeed, aircraft eastward velocity, northward velocity, vertical acceleration, and time, at a sample rate of 5/s. MMS data products are presented in the form of either 5 or 1 Hz time series. The 1 Hz data stream, generally used by ER-2 investigators, is obtained from the 5 Hz data stream by filtering and desampling. The method of measurement of the meteorological parameters is given and the results of their analyses are discussed.

Bowen, Stuart W.↗

Evaluation of cloudiness parameterizations using a cumulus ensemble model

Diagnostic cloudiness parameterizations in large-scale models are evaluated by using a two-dimensional numerical cumulus ensemble model. The model covers a large horizontal domain (512 km) but resolves individual clouds. This study explores the dependence of diagnostic relations (between cloud amount and a large-scale variable) on cloud regime, horizontal averaging distance, and cloud type for tropical convective cloud regimes. Large-scale variables, including relative humidity, cumulus mass flux, large-scale vertical velocity and surface precipitation rate, are examined. It is shown that the total cloud amount can be better estimated as the sum of separate estimates of stratiform and convective cloud amounts using different large-scale variables than by an estimate of the total cloud amount using any single large-scale variable. The stratiform cloud amount can best be estimated by using relative humidity. The convective cloud amount can be diagnosed by using cumulus mass flux. Neither set of diagnostic relations depends significantly on the stimulated cloud regime or horizontal averaging distance, but other diagnostic relations do show some such dependence. These results are interpreted and their implications for cloudiness parameterization are discussed.

Xu, Kuan-Man↗

Study of Ardmore, Oklahoma storm clouds. I - Convective storm cloud initiation and development based on the remote sensing gravity-wave-induced convection. II - Satellite infrared remote sensing and numerical simulation

The role of gravity waves is discussed with respect to the vertical velocity of convection. Specific attention is given to wave-induced convection which contributes to the fractions of formation and the development of severe convective storms. Large-amplitude gravity waves and convective instability were investigated in storm clouds above Ardmore, Oklahoma. Rapid-scan satellite imagery and radar summaries provide evidence of water-vapor condensation related to convection which is introduced by gravity waves. Gravity wave periods of 35 minutes are found to initiate weak convection, which can be intensified by gravity waves with periods of 20 minutes. The convective motion reaches a maximum about one hour before funnel clouds develop. Other mechanisms which contribute to convective motion are considered, but gravity waves are the major contributor to the initiation, formation, and development of mesoscale storm clouds. Cloud modeling based on satellite imagery and sounding data showed that by overshooting cloud tops that penetrated the tropopause, storm clouds mature; that these clouds collapse about 9 minutes before the touchdown of tornadoes; and that cloud tops collapse at a high rate about 6 minutes before tornadoes lift off.

Hung, R. J.↗

Similarity scaling applied to sodar observations of the convective boundary layer above an irregular hill

Doppler sodar measurements made during the First ISLSCP Field Experiment of the temperature structure parameter C(T)2 and the standard deviation of vertical velocity fluctuations sigma-w in the convective boundary layer were analyzed. Results indicate that estimates of the surface heat flux H(0) inferred from the profiles of C(T)2 near the surface are smaller than values of H(0) measured by eddy correlation at a tower. The measured values of sigma-w were slightly smaller than estimates based on available parameterizations.

Sorbjan, Zbigniew↗

Impact decapitation from laboratory to basin scales

Although vertical hypervelocity impacts result in the annihilation (melting/vaporization) of the projectile, oblique impacts (less than 15 deg) fundamentally change the partitioning of energy with fragments as large as 10 percent of the original projectile surviving. Laboratory experiments reveal that both ductile and brittle projectiles produce very similar results where limiting disruption depends on stresses proportional to the vertical velocity component. Failure of the projectile at laboratory impact velocities (6 km/s) is largely controlled by stresses established before the projectile has penetrated a significant distance into the target. The planetary surface record exhibits numerous examples of oblique impacts with evidence fir projectile failure and downrange sibling collisions.

Schultz, P. H.↗

Optimal aircraft performance during microburst encounter

The effects of microburst characteristics on the optimal penetration performance of jet transport and general aviation aircraft are presented. The purpose is to determine the best possible performance that can be achieved in a broad range of microbursts. A secondary goal is to illustrate good strategies for dealing with a range of microbursts during takeoff and landing. Over 1100 optimal trajectories were computed for two aircraft types flying through idealized microbursts using a Successive Quadratic Programs trajectory optimization algorithm. Contours of safety metrics are plotted as functions of the length scales, magnitudes, and locations of horizontal wind shears and vertical downdrafts. These performance contours show three length-scale regimes for optimal microburst penetration. At short length scales, hazards usually associated with gustiness predominate (e.g., high normal load factor, rotational upset). At intermediate length scales, a degraded ability to maintain flight path and/or vertical velocity poses the most serious threat. At very long microburst length scales, excessive touchdown velocities may result. The ability to transit a microburst successfully also varies strongly with microburst location. The results show that both aircraft types could penetrate some very severe microbursts if optimal control histories were followed. Nevertheless, these control strategies assume perfect prior knowledge of the wind, and practical limits to successful encounter with real-time control capabilities would be lower. The optimally controlled jet transport can successfully penetrate higher intensity microbursts than can the general aviation aircraft.

Psiaki, Mark L.↗

A Comparison Between Raman Lidar and Conventional Contact Measurements of Atmospheric Temperature

Described here are the results of comparison between lidar and conventional contact measurements of the vertical temperature profile of the atmosphere. The lidar measurements are based on the method of temperature dependence of pure rotational Raman scattering of nitrogen and oxygen molecules. The presented results show that, as a whole, the motion of the lidar and conventional profiles coincide in the confidence intervals. Still there are districts in which the differences lay out of the confidence intervals. In analysis and estimation of the coincidence and the distinction in moving the profiles, we must take into account the differences between the methods for measuring the temperature profiles by lidar and contact methods, i.e. the next additional factors. The tied balloon meter gives the momentary values of the temperature in particular points of the profile, as these momentary values are the results of consequent, but not simultaneous measurements. In the case of free flying balloon, the time of measuring the lower several hundred meters is little because of high vertical velocity (about 300 m/min). This leads to an indefinite increase of the measuring error. The complete space coincidence between the lidar's and conventional profiles isn't possible. The contribution of the factors mentioned above about the error of comparison could increase because of nonstable layers in the planetary boundary layer of the atmosphere as well as by the influence of the mountains and the city situated nearby.

Mitev, V. M.↗

Evaluation of a technique to quantify microburst windshear hazard potential to aircraft

A wind shear hazard index, known as the F-factor, is investigated for application with look-ahead sensors. Based on data from microburst simulations with the NASA windshear model, the downdraft results in a significant contribution to the wind shear hazard, especially at altitudes above 150 meters. Since most look-ahead wind shear sensors can only detect horizontal shear and cannot measure vertical velocity, a relationship is developed for approximating the total F-factor using information based solely on the horizontal wind shear and altitude. This relationship is then tested using data from several microburst cases.

Byrd, G. P.↗

Aircraft control in a downburst on takeoff and landing

Aircraft takeoff and landing in the presence of downbursts are addressed. Dynamic optimization and feedback control system design techniques are used to determine proper guidance laws for aircraft in the presence of downbursts, and insensitivity to downburst structures is emphasized. Avoidance is the best policy. If an inadvertent encounter occurs when the aircraft is already close to or even in the downburst, the pilot should concentrate on vertical flight, unless he is sure which direction to turn for winds of less intensity. If such an encounter happens on takeoff, maximum thrust should be used aggressively and a lower climb rate or even descending flight is recommended. Similar strategy is applicable for abort landing. If an encounter happens on landing and encounter height is low, landing should proceed. It is recommended that the nominal horizontal and vertical velocities w.r.t the ground should be maintained, subject to a minimum airspeed constraint. A landing control logic is designed to accomplish this.

Zhao, Yiyuan↗

Flux estimation of the FIFE planetary boundary layer (PBL) with 10.6 micron Doppler lidar

A method is devised for calculating wind, momentum, and other flux parameters that characterize the planetary boundary layer (PBL) and thereby facilitate the calibration of spaceborne vs. in situ flux estimates. Single Doppler lidar data are used to estimate the variance of the mean wind and the covariance related to the vertically pointing fluxes of horizontal momentum. The skewness of the vertical velocity and the range of kinetic energy dissipation are also estimated, and the surface heat flux is determined by means of a statistical Navier-Stokes equation. The conclusion shows that the PBL structure combines both 'bottom-up' and 'top-down' processes suggesting that the relevant parameters for the atmospheric boundary layer be revised. The conclusions are of significant interest to the modeling techniques used in General Circulation Models as well as to flux estimation.

Gal-Chen, Tzvi↗

Response of a stably stratified atmosphere to low-level heating - An application to the heat island problem

Two-dimensional airflow characteristics past a heat island are investigated using both a linear analytic model and a nonlinear numerical model in the context of the response of a stably stratified atmosphere to specified low-level heating in a constant shear flow. Results from the steady-state, linear, analytic solutions exhibit typical flow response fields that gravity waves produce in response to the local heat source in the presence of environmental flow. The magnitude of the perturbation vertical velocity is shown to be much larger in the shear-flow case than in the uniform-flow case. Two distinct flow features are observed for larger heating amplitude (hence, larger nonlinearity factor): the gravity-wave-type response field on the upstream side of the heat island and the strong updraft circulation cell located on the downstream side. As the heating amplitude increases, the updraft circulation cell strengthens and shifts farther downwind. The strong updraft cell is believed to be partly responsible for precipitation enhancement observed on the downstream side of the heat island. It is found that the continuing downwind propagation of the updraft circulation cell is related to basic-state wind speed.

Baik, Jong-Jin↗

Optimal nadir scan angle for a space-based Doppler lidar wind sounder

A Laser Atmospheric Wind Sounder computer simulation model was used to conduct a series of trades between scan angle and accuracy/coverage to determine the optimal scan angle for a space-based Doppler lidar wind sounder. Attention is given to vertical backscatter profiles, advanced signal processing, pulse length, shot density, and vertical velocity variance. The LOS speed uncertainty (m/s) projected into the horizontal plane as a function of the nadir scan angle for a single laser shot into the upper troposphere and lowest 1 km of the earth's atmosphere for expected backscatter values is shown.

Emmitt, George D.↗

Tropical Pacific Ocean response to observed winds in a layered general circulation model

The effect of forcing by monthly wind-stress variability is assessed with respect to the behavior of an isopycnic coordinate general circulation model. The isopycnic model incorporates an embedded mixed layer, and the equations are given for the interior layers, the surface mixed layer, and the atmospheric forcing. The anomalous variability of several variables is examined in a simulation using data from 1970-1985 with specific attention given to the anomalous response related to the 1982-1983 ENSO. The model fields describing sea-surface temperature (SST), sea level, and currents are found to be comparable to those reported from observational campaigns. Anomalous values of SST compare best with observed data when averaged over large spatial regions, and the amplitudes of the mean horizontal currents and anomalous zonal currents are comparable except with respect to amplitude data. The present study permits the simulation of basin-scale tropical Pacific mixed-layer depth and the mean vertical velocity field.

Miller, Arthur J.↗

Observations of high-frequency and high-wavenumber solar oscillations

Doppler shift measurements of the Na D1 absorption line reveal solar oscillations in a new regime of frequency and wavenumber. Oscillations of vertical velocities in the temperature minimum and low chromosphere of the sun are observed with frequencies ranging up to 9.5 mHz. The fundamental modes appear with wavenumbers up to 5.33/Mm (equivalent spherical harmonic degree 3710). No evidence for chromospheric modes of 3-minute period is reported.

Fernandes, D. N.↗

The gabbro-eclogite phase transition and the elevation of mountain belts on Venus

Among the four mountain belts surrounding Lakshmi Planum, Maxwell Montes is the highest and stands up to 11 km above the mean planetary radius and 7 km above Lakshmi Planum. The bulk composition and radioactive heat production of the crust on Venus, where measured, are similar to those of terrestrial tholeiitic basalt. Because the thickness of the low-density crust may be limited by the gabbro-garnet granulite-eclogite phase transitions, the 7-11 km maximum elevation of Maxwell Montes is difficult to understand except in the unlikely situation that the crust contains a large volume of magma. A possible explanation is that the base of the crust is not in phase equilibrium. It has been suggested that under completely dry conditions, the gabbro-eclogite phase transition takes place by solid-state diffusion and may require a geologically significant time to run to completion. Solid-state diffusion is a strongly temperature-dependent process. In this paper we solve the thermal evolution of the mountain belt to attempt to constrain the depth of the gabbro-eclogite transition and thus to assess this hypothesis quantitatively. The one-dimensional heat equation is solved numerically by a finite difference approximation. The deformation of the horizontally shortening crustal and mantle portions of the thermal boundary layer is assumed to occur by pure shear, and therefore the vertical velocity is given by the product of the horizontal strain rate and depth.

Namiki, Noriyuki↗