Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Ab Initio Study of Electronic and Magnetic Properties in ZnO-Doped and Co-doped by Vanadium and Silver

Based upon the ab initio of spin density functional calculation, the electronic and magnetic properties of Zn{sub 1−x}M{sub x}O (M = Ag or V) and Zn{sub 1−x−y}A{sub x}B{sub y}O (A = V; B = Ag) are investigated, using the Korringa-Kohn-Rostoker (KKR) method coupled with the coherent potential approximation (CPA). The total and partial densities of state are calculated. The effect of concentration values in Zn{sub 1−x}V{sub x}O and Zn{sub 1−x−y}V{sub x}Ag{sub y}O are deduced. Moreover, the magnetic disorder local moment (DLM) and the total energy are obtained for different concentration values of doped and co-doped zinc oxide (ZnO).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Iron Alloying on the Properties of Vanadium Dioxide

Results of investigations of the x-ray structural parameters of the crystal lattice and their temperature dependences in the vicinities of the metal-dielectric phase transition for V{sub 1–x}Fe{sub x}O{sub 2} solid solutions are reported together with results of comparison of x-ray and pycnometric densities of these materials. The defect concentration in the materials under study is estimated at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling of Work Hardening During Hot Rolling of Vanadium and Niobium Microalloyed Steels in the Low Temperature Austenite Region

This work extends the application of the well-established Estrin and Mecking (EM) work-hardening model in unstable low temperature austenite region. The interaction between work hardening, recovery and softening attributed to recrystallization and transformation to ferrite under dynamic conditions is considered. Experimental parameters were varied to study the effects of strain, strain rate and temperature during hot rolling in the low temperature austenite region. Hot compression tests were performed two microalloyed steels—one containing V and the other Nb—at strain rates between 0.1 and 10 s{sup −1} over a temperature range of 750-1000 °C. A model is presented that describes the influence of dynamic recovery on flow behavior in the unstable austenite region. The modified work-hardening model incorporates an additional fitting parameter to the EM model and is dependent on the recovery and softening rates. The new model improved prediction in the unstable austenite region, while the original EM model gave better correlation at relatively higher temperatures when dynamic recrystallization is dominant or at relatively lower temperatures when only dynamic recrystallization to ferrite was the softening mechanism.

36 MATERIALS SCIENCE↗

Selective oxidation and oxidative dehydrogenation of hydrocarbons on bismuth vanadium molybdenum oxide

A systematic investigation of the oxidative dehydrogenation of propane to propene and 1- and 2-butene to 1,3-butadiene, and the selective oxidation of isobutene to methacrolein was carried out over Bi 1- x /3V 1- x Mo x O 4 ( x = 0-1) with the aim of defining the effects of catalyst and reactant composition on the reaction kinetics. This work has revealed that the reaction kinetics can differ significantly depending on the state of catalyst oxidation, which in turn depends on the catalyst composition and the reaction conditions. Under conditions where the catalyst is fully oxidized, the kinetics for the oxidation of propene to acrolein and isobutene to methacrolein, and the oxidative dehydrogenation of propane to propene, 1-butene and trans-2-butene to butadiene are very similar - first order in the partial pressure of the alkane or alkene and zero order in the partial pressure of oxygen. These observations, together with XANES and UV-Vis data, suggest that all these reactions proceed via a Mars van Krevelen mechanism involving oxygen atoms in the catalysts and that the rate-limiting step involves cleavage of the weakest C-H bond in the reactant. Consistent with these findings, the apparent activation energy and pre-exponential factor for both oxidative dehydrogenation and selective oxidation correlate with the dissociation energy of the weakest C-H bond in the reactant. As the reaction temperature is lowered, catalyst reoxidation can become rate-limiting, the transition to this regime depending on ease of catalyst reduction and effectiveness of the reacting hydrocarbons as a reducing agent. Here, a third regime is observed for isobutene oxidation at lower temperatures, in which the catalyst is more severely reduced and oxidation now proceeds via reaction of molecular oxygen, rather than catalyst lattice oxygen, with the reactant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of reactions between vanadium oxide and plasma-sprayed yttria-stabilized zirconia coatings

The phase evolution occurring during the reaction between corrosive V{sub 2}O{sub 5} (T{sub m} = 690 C) and a plasma-sprayed 7 wt.% Y{sub 2}O{sub 3}ZrO{sub 2} (YSZ) coating from 700 to 900 C has been investigated in situ by X-ray diffraction. The temperature and time of interaction between the V{sub 2}O{sub 5} and YSZ coating determines the phases observed. Between 700 and 750 C, reaction products of ZrV{sub 2}O{sub 7} and YVO{sub 4} were observed within minutes of reaching the test temperature. m-ZrO{sub 2} was observed after 220 and 60 min at 700 and 750 C, respectively. The simultaneous formation of both ZrV{sub 2}O{sub 7} and YVO{sub 4} at the beginning of the reaction along with the delay of the m-ZrO{sub 2} formation suggests similar reactivity between both Zr and Y with V{sub 2}O{sub 5}. The weight percent of the ZrV{sub 2}O{sub 7} phase began to diminish after 150 and 60 min at 700 and 750 C, respectively. For reaction temperatures of 800 and 900 C, there is a rapid decrease in the amount of t{prime}-ZrO{sub 2} and a rapid increase in the amount of m-ZrO{sub 2} with reaction time. YVO{sub 4} was also observed at these reaction temperatures. SEM and TEM microstructural observations confirmed the phases detected from the in situ XRD experiments. Reactions between YSZ and V{sub 2}O{sub 5} suggest that the formation of a liquid phase due to the high solubility of both zirconia and yttria in vanadia is the dominate mechanism that damages the coating. The thermal conductivity of a plasma-sprayed YSZ coating reacted with up to 1 wt.% V{sub 2}O{sub 5} did not significantly change due to the small volume affected.

36 MATERIALS SCIENCE↗

A hybrid analytical and numerical model for cross-over and performance decay in a unit cell vanadium redox flow battery

Developing an accurate and efficient model for cross-over is critical for improving the long-term performance of redox flow batteries (RFBs). Here, this work presents a hybrid analytical and numerical model that combines a two-dimensional analytical solution to the active species, a one-dimensional analytical model for cross-over mechanisms, and a zero-dimensional numerical model for outlet concentrations of reactants. By comparing with experiment over 41 cycles (ca. 144 h), the model reported a mean voltage difference of 0.0089 V, mean time difference of 14 s per cycle (of 3.5 h), maximum relative difference for capacity and energy of 1.34% and 1.63%, respectively. The predicted mean concentrations for V 2+ , V 3+ , and VO$_{2}^{+}$ in membrane are 65%~77% of measured values from the literature. Upon validation, the model reproduced behaviors in electrolyte imbalance similar to those observed in experiments and numerical models, and revealed the control of cross-over, self-discharge, stoichiometry of side reactions, and Coulombic efficiency on electrolyte imbalance. The model also demonstrates excellent computational efficiency for simulating 41 cycles (around 37,000 points) within 3~4 s. The demonstrated efficiency and accuracy for predicting cross-over and its impacts on voltage, capacity&energy decay, membrane concentrations, and electrolyte imbalance makes it a reliable tool for optimizing RFBs’ long-term performance.

25 ENERGY STORAGE↗

Vanadium-enhanced Na 2 FePO 4 F cathodes for high-performance sodium-ion batteries

Sodium fluorophosphate Na 2 FePO 4 F holds great potential for sodium-ion batteries due to its high theoretical capacity, excellent structural stability, abundant resources, and affordability. However, its poor electronic and ionic conductivities limit its practical applications. Therefore, ion doping and carbon coating have been employed as synergistic strategies in this study to overcome these limitations. A one-step, energy-efficient solid-state method using sucrose as a carbon coating source was used to synthesize Na 2 FePO 4 F/C (NFPF/C) and its doped variant, Na 2 Fe 0.85 V 0.1 PO 4 F/C (NFVPF/C). 23 Na-MAS-NMR spectra confirm the existence of two distinct sites for sodium (Na1/Na2). The ex-situ 23 Na-MAS-NMR performed at different states-of-charge reveals the activity of only one sodium. The scanning electron microscopy findings reveal a reduction in the particle size with V-introduction, enhancing the energetic performances. NFVPF/C delivers higher specific capacity of 122 mAh g −1 compared to 116 mAh g −1 for NFPF/C at 0.1C. It also demonstrates improved cycling stability, retaining 81 % of its initial capacity after 120 cycles, in contrast to 46 % for the pristine material. The doped phase outperforms the pristine at higher current rates, delivering specific capacities of 81 and 55 mAh g −1 at 2C and 3C, respectively, compared to 35 and 17 mAh g −1 for NFPF/C.

25 ENERGY STORAGE↗

A new series of pillared uranyl-vanadates based on uranophane-type sheets in the uranium-vanadium-linear alkyl diamine systems

A new family of three-dimensional (3D) uranyl vanadates (C{sub 3}N{sub 2}H{sub 12}){l_brace}[(UO{sub 2})(H{sub 2}O)][(UO{sub 2})(VO{sub 4})]{sub 4}{r_brace}.1H{sub 2}O (C3UV), (C{sub 4}N{sub 2}H{sub 14}){l_brace}[(UO{sub 2})(H{sub 2}O)][(UO{sub 2})(VO{sub 4})]{sub 4}{r_brace}.2H{sub 2}O (C4UV), (C{sub 5}N{sub 2}H{sub 16}) {l_brace}[(UO{sub 2})(H{sub 2}O)][(UO{sub 2})(VO{sub 4})]{sub 4}{r_brace} (C5UV), (C{sub 6}N{sub 2}H{sub 20}) {l_brace}[(UO{sub 2})(H{sub 2}O)][(UO{sub 2})(VO{sub 4})]{sub 4}{r_brace} (C6UV) and (C{sub 7}N{sub 2}H{sub 22}) {l_brace}[(UO{sub 2})(H{sub 2}O)][(UO{sub 2})(VO{sub 4})]{sub 4}{r_brace} (C7UV) was prepared from mild-hydrothermal reactions using 1,3-diaminopropane, 1,4-diaminobutane, 1,5-diaminopentane, 1,6-diaminohexane and 1,7-diaminoheptane as structure directing agents. The five compounds are orthorhombic, space group Cmc2{sub 1}, with a{approx}15.6, b{approx}14.1, c{approx}13.6 A. The structures were solved using single-crystal X-ray diffraction data. The compounds contain the same three-dimensional inorganic framework built from uranyl-vanadate layers of uranophane-type anion topology pillared by [UO{sub 6}(H{sub 2}O)] pentagonal bipyramids. The doubly protonated diamines reside in the cavities created by the inorganic framework and are linked to the inorganic framework through hydrogen bonds involving one nitrogen atom. The structure is compared with that of uranyl-phosphates and uranyl-arsenates containing alkaline metals. The use of alkaline metals for the synthesis of uranyl-vanadates leads to carnotite-type compounds. - Graphical abstract: The (C{sub 6}N{sub 2}H{sub 20}){l_brace}[(UO{sub 2})(H{sub 2}O)][(UO{sub 2})(VO{sub 4})]{sub 4}{r_brace} compound: projection in the (1 0 0) and in the (0 0 1) planes showing the amine position.

36 MATERIALS SCIENCE↗

Thermoelectric properties of fine-grained FeVSb half-Heusler alloys tuned to p-type by substituting vanadium with titanium

Fine-grained Ti-doped FeVSb half-Heusler alloys were synthesized by combining mechanical alloying and spark plasma sintering and their thermoelectric properties were investigated with an emphasis on the influences of Ti doping and phase purity. It was found that substituting V with Ti can change the electrical transport behavior from n-type to p-type due to one less valence electron of Ti than V, and the sample with nominal composition FeV{sub 0.8}Ti{sub 0.4}Sb exhibits the largest Seebeck coefficient and the maximum power factor. By optimizing the sintering temperature and applying annealing treatment, the power factor is significantly improved and the thermal conductivity is reduced simultaneously, resulting in a ZT value of 0.43 at 500 Degree-Sign C, which is relatively high as for p-type half-Heusler alloys containing earth-abundant elements. - Graphical abstract: Fine-grained Ti-doped FeVSb alloys were prepared by the MA-SPS method. The maximum ZT value reaches 0.43 at 500 Degree-Sign C, which is relatively high for p-type half-Heusler alloys. Highlights: Black-Right-Pointing-Pointer Ti-doped FeVSb half-Heusler alloys were synthesized by combining MA and SPS. Black-Right-Pointing-Pointer Substituting V with Ti changes the electrical behavior from n-type to p-type. Black-Right-Pointing-Pointer Thermoelectric properties are improved by optimizing sintering temperature. Black-Right-Pointing-Pointer Thermoelectric properties are further improved by applying annealing treatment. Black-Right-Pointing-Pointer A high ZT value of 0.43 is obtained at 500 Degree-Sign C for p-type Ti-doped FeVSb alloys.

36 MATERIALS SCIENCE↗

Templated vanadium tellurites: Identifying the effects of low density attractions on inorganic layer topology

Exploration of the NH 4 VO 3 /Na 2 TeO 3 /2,4,6-triaminopyrimidine/H 2 O system yielded the formation of two new phases, [C 4 H 8 N 5 ][VO 3 ] and [C 4 H 8 N 5 ] 2 [V 2 Te 2 O 10 ]. Phase selection in this system is largely dictated by the tellurium concentration during reaction. Differences in the [V 2 Te 2 O 10 ] n 2n- layer topologies in [C 4 H 8 N 5 ] 2 [V 2 Te 2 O 10 ] and two related phases, [C 6 H 16 N 2 ][V 2 Te 2 O 10 ] and [C 5 H 14 N 2 ][V 2 Te 2 O 10 ] were probed using noncovalent interaction energy ratios. These ratios allow for one to directly visualize and quantify differences in intermolecular interaction strengths between compounds. The presence or absence of π - π stacking interactions between organic ammonium cations in [C 4 H 8 N 5 ] 2 [V 2 Te 2 O 10 ] and two related phases, [C 6 H 16 N 2 ][V 2 Te 2 O 10 ] and [C 5 H 14 N 2 ][V 2 Te 2 O 10 ] is the source of layer connectivity differences. These π - π interactions between 2,4,6-triaminopyrimidinium cations in [C 4 H 8 N 5 ] 2 [V 2 Te 2 O 10 ] dictate their orientations between [V 2 Te 2 O 10 ] n 2n- layers, and direct the locations of hydrogen-bonding interactions. Effects associated with reactant concentrations, charge density matching and intermolecular interactions were probed using composition space analyses, Iterative Hirshfeld partial atomic charge, molecular surface area calculations and noncovalent interaction index calculations, respectively.

noncovalent interaction energy ratios↗

Extrinsic and intrinsic properties in metal–insulator transition of hydrothermally prepared vanadium dioxide crystals

The clear insulator (monoclinic-VO{sub 2}) to metal (rutile-VO{sub 2}) transition (IMT) was observed in electrical conductivity and differential scanning calorimeter (DSC) measurements at around 340 K, which is IMT temperature (T{sub H}), in the hydrothermally prepared VO{sub 2} crystals. The occurrence of metal to insulator transition (MIT) temperature (T{sub C}) was observed below 333 K during the first resistance measurement cycle in the most of cases. The sudden jump of the electrical resistance at IMT and MIT points was amplified several times than that of the first cycle during the repeated successive thermal cycles (heating and cooling across the IMT and MIT temperatures). T{sub C} and T{sub H} shifted to higher temperature by the repeated successive thermal cycles. This shift and the amplified jump might be related to the mechanical stress between the VO{sub 2} crystals, i.e. extrinsic properties. However, the starting point of MIT, T{sub CS} = ∼ 336 K, and the starting point of IMT, T{sub HS} = ∼ 338 K, kept almost constant during the repeated thermal cycles (< 10 times). These two temperatures may be related to the intrinsic properties of the VO{sub 2}: the phase transitions initiated at these temperatures regardless of the number of the repeated thermal cycles. The neat surface of the VO{sub 2} crystals was severely damaged and the average size of particles reduced from 110 nm to 70–90 nm after extensively repeated thermal cycles (> 70 times). The damaged surface and the smaller particles, which would be originated from the mechanical stress caused by crystal volume change during the first order transition of the VO{sub 2}, would weaken the electrical conduction path (loosen grain boundaries) between the VO{sub 2} single crystals and would result in the amplified jump at the following MIT. This report may boost the study for the improved stability and lifetime of the VO{sub 2} based electronic devices. - Highlights: • The sharp phase transition in cluster of VO{sub 2} crystals depends on repeated thermal cycles. • Two intrinsic and two extrinsic temperatures are observed during the phase transition. • The mechanical stress change and surface damage may cause the extrinsic properties in transport measurement.

36 MATERIALS SCIENCE↗

Electrochemical characterization for lithium vanadium phosphate with different calcination temperatures prepared by the sol–gel method

Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C (LVP/C) composite materials were synthesized via a sol–gel method with oxalic acid as the chelating agent and polyethylene glycol (PEG) as the supplementary carbon source. The oxalic acid and PEG serve as double carbon sources. This study focused on the effect of different calcination temperatures on the electrochemical properties of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}. The diffraction peaks for all of the samples are well indexed to monoclinic Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} with a P2{sub 1}/n space group. The TGA data indicate that the residual carbon content of LVP/C-700 is the highest (i.e., 2.31 wt.%), and as the calcination temperature increased, the residual carbon content of the material gradually decreased. SEM and TEM analyses indicated that the LVP particles that were calcined at 700 °C exhibit a uniform particle size distribution and the carbon coating exhibited a complete and orderly moderate thickness. The LVP/C-700 material exhibits the best electrochemical performance in the voltage range of 3.0 to 4.3 V and 0.1 C where the initial discharge capacity can reach 128.98 mAh g{sup −} {sup 1}. Even after 200 cycles, the discharge capacity was 119.31 mAh g{sup −} {sup 1}, and the capacity retention rate was 92.49%. - Highlights: • Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite materials have been synthesized via a sol–gel method with double carbon sources. • The different calcination temperatures affect the grain growth and crystallinity of the Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C materials. • The LVP/C-700 material exhibites the largest lithium ion diffusivity and electronic conductivity.

36 MATERIALS SCIENCE↗

The role of titanium and vanadium based precipitates on hydrogen induced degradation of ferritic materials

Highlights: • Hydrogen induced damage is studied in Fe-C-Ti and Fe-C-V ferritic alloys. • Fe-C-Ti is less susceptible to hydrogen embrittlement than Fe-C-V. • Fe-C-V is less susceptible to blistering than Fe-C-Ti. • The role of diffusible hydrogen depends on the damage mechanism. - Abstract: The hydrogen induced damage of generic Fe-C-Ti and Fe-C-V ferritic alloys was investigated to assess the influence of precipitates on the hydrogen sensitivity of a material. The precipitates, formed during heat treatment, were evaluated by scanning transmission electron microscopy (STEM). The hydrogen/material interaction was evaluated by: 1) melt and hot extraction to determine the total and diffusible hydrogen content, respectively, 2) permeation experiments to calculate the diffusion coefficient, 3) thermal desorption spectroscopy to determine the hydrogen trapping characteristics of the materials. Furthermore, two different types of hydrogen induced damage were evaluated, i.e. hydrogen assisted cracking and blistering, resulting from electrochemical hydrogen charging with and without the application of an external load, respectively. Evaluation of the hydrogen induced damage and the role of the precipitates was performed by combining optical microscopy, scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). An important though divertive role of diffusible hydrogen is observed in both damage mechanisms for the investigated microstructures. On the one hand, a large amount of diffusible hydrogen compared to strongly trapped hydrogen promotes hydrogen assisted cracking of materials, while on the other hand, the blistering phenomenon is delayed under such conditions.

36 MATERIALS SCIENCE↗

Vanadium oxide nanodisks: Synthesis, characterization, and electrochemical properties

Highlights: Black-Right-Pointing-Pointer Highly crystallined VO{sub 1.6}{center_dot}H{sub 2}O nanodisks have been synthesized by using a novel solid-solution-solid growth process. Black-Right-Pointing-Pointer The nanodisks are assembled from nanoparticles. Black-Right-Pointing-Pointer PEG-4000 plays an important role for the formation of the nanodisks. Black-Right-Pointing-Pointer The as-synthesized nanodisks exhibit good electrochemical behavior. -- Abstract: Highly crystallined VO{sub 1.6}{center_dot}H{sub 2}O nanodisks assembled from nanoparticles have been successfully fabricated under hydrothermal conditions by using bulk V{sub 2}O{sub 5} and Na{sub 2}S{sub 2}O{sub 3} as the starting materials in the presence of surfactant polyethylene glycol 4000 (PEG-4000). The nanodisks have a diameter of 200 nm and thickness of 40 nm. Hollow nanodisks are occasionally observed, which is similar to Chinese ancient copper coins. The formation of nanodisks can be ascribed to a novel solid-solution-solid growth mechanism. Compared with other methods, the solid state transformation method is simple and economic. In addition, the nanodisks exhibit good electrochemical behavior and promising to be used in lithium-ion battery.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of mesoporous rod-like nanocrystalline vanadium oxide hydrate V{sub 3}O{sub 7}·H{sub 2}O from hydroquinone and V{sub 2}O{sub 5}

Graphical abstract: - Highlights: • Rod-like nanocrystalline V{sub 3}O{sub 7}·H{sub 2}O has heen synthesized hydrothermally. • Molar ratio is key factor for structure and morphology. • Electrochemical properties were also studied. • CV has revealed reversible redox behavior with charge–discharge cycling. - Abstract: Rod-like nanocrystalline V{sub 3}O{sub 7}·H{sub 2}O has been synthesized hydrothermally via a simple and elegant route. Techniques X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, thermal analysis (TG-DTA), X-ray photoelectron spectroscopy (XPS), UV–vis spectroscopy and nitrogen adsorption/desorption isotherms have been used to characterize the structure, morphology and composition of the materials. The as-prepared V{sub 3}O{sub 7}·H{sub 2}O nanorods are up to several of micrometers in length, about 130 nm in width and about 70 nm in thickness in average, respectively. Cyclic voltammetric characterization of thin films of V{sub 3}O{sub 7}·H{sub 2}O nanorods has revealed reversible redox behavior with charge–discharge cycling corresponding to the reversible lithium intercalation/deintercalation.

36 MATERIALS SCIENCE↗