SEARCH · Engineering Papers

Results for “utility selection process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Advanced Water Purification System for In Situ Resource Utilization

A main goal in the field of In Situ Resource Utilization is to develop technologies that produce oxygen from regolith to provide consumables to an extraterrestrial outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloric and hydrofluoric acids are byproducts of the reduction processes, which must be removed to meet electrolysis purity standards. We previously characterized Nation, a highly water selective polymeric proton-exchange membrane, as a filtration material to recover pure water from the contaminated solution. While the membranes successfully removed both acid contaminants, the removal efficiency of and water flow rate through the membranes were not sufficient to produce large volumes of electrolysis-grade water. In the present study, we investigated electrodialysis as a potential acid removal technique. Our studies have shown a rapid and significant reduction in chloride and fluoride concentrations in the feed solution, while generating a relatively small volume of concentrated waste water. Electrodialysis has shown significant promise as the primary separation technique in ISRU water purification processes.

Anthony, Stephen M.↗

NASA NTRS2014

Advanced Water Purification System for In Situ Resource Utilization Project

A main goal in the field of In Situ Resource Utilization is to develop technologies that produce oxygen from regolith to provide consumables to an extratrrestrial outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloric and hydrofluoric acids are byproducts of the reduction processes, which must be removed to meet electrolysis purity standards. We previously characterized Nation, a highly water selective polymeric proton-exchange membrane, as a filtrtion material to recover pure water from the contaminated solution. While the membranes successfully removed both acid contaminants, the removal efficiency of and water flow rate through the membranes were not sufficient to produce large volumes of electrolysis-grade water. In the present study, we investigated electrodialysis as a potential acid removable technique. Our studies have show a rapid and significant reduction in chloride and fluoride concentrations in the feed solution, while generating a relatively small volume of concentrated waste water. Electrodialysis has shown significant promise as the primary separation technique in ISRU water purification processes.

Technology Portfolio System↗

DOE OSTI2020

Carbon Utilization: Electrochemical Approach Using Novel Catalyst and System Integration

The environmental footprint from power generation can be mitigated by capturing emitted carbon dioxide (CO2) and converting it to value-added fuel sources. A multitude of different fuels can be produced from CO2 depending on the chemical reaction catalysts. Typically, these pathways can be developed electrochemically, or through hydrogenation. In recent years the electrochemical reduction of CO2 has grown exponentially, as it has shown potential to decrease atmospheric pollution and provide an additional means of on-demand electricity storage. Formic acid (FA) in particular has industrial applications such as in fuel cells or as a hydrogen storage medium, and requires a lower thermodynamic energy input than any other fuel produced for electrochemical CO2 reduction. However, product selectivity remains a challenge for conventional electrocatalysts, making FA production efficiencies above 50% difficult. To address the challenge of catalytic selectivity, UK CAER employs enzymatic catalysts to facilitate the FA production and minimize unwanted byproducts. Our process couples the catalyst with a charge mediator which is necessary to shuttle electrons, and an electrolyte pH buffer to prevent the catalyst from degrading. Presently, production efficiencies have approached 60% at a rate of over 10 mM FA/hour. System design considerations (flow rate, bulk volume) will also be discussed.

01 COAL, LIGNITE, AND PEAT↗

NASA NTRS1991

Utilizing expert systems for satellite monitoring and control

Spacecraft analysts in the spacecraft control center for the Cosmic Background Explorer (COBE) satellite are currently utilizing a fault-isolation expert system developed to assist in the isolation and correction of faults in the communications link. This system, the communication link expert assistance resource (CLEAR), monitors real time spacecraft and ground systems performance parameters in search of configuration discrepancies and communications link problems. If such a discrepancy or problem is isolated, CLEAR alerts the analyst and provides advice on how to resolve the problem swiftly and effectively. The CLEAR system is the first real time expert system to be used in the operational environment of a satellite control center at the NASA Goddard Space Flight Center. Clear has not only demonstrated the utility and potential of an expert system in the demanding environment of a satellite control center, but also has revealed many of the pitfalls and deficiencies of development of expert systems. One of the lessons learned from this and other initial expert system projects is that prototypes can often be developed quite rapidly, but operational expert systems require considerable effort. Development is generally a slow, tedious process that typically requires the special skills of trained programmers. Due to the success of CLEAR and several other systems in the control center domain, a large number of expert systems will certainly be developed to support control center operations during the early 1990's. To facilitate the development of these systems, a project was initiated to develop an integrated, domain-specific tool, the generic spacecraft analyst assistent (GenSAA), that alows the spacecraft analysts to rapidly create simple expert systems themselves. By providing a highly graphical point-and-select method of system development, GenSAA allows the analyst to utilize and/or modify previously developed rule bases and system components; thus, facilitating software reuse and reducing development time and effort.

Hughes, Peter M.↗

NASA NTRS1977

Utilization of remote sensing observations in hydrologic models

Most of the remote sensing related work in hydrologic modeling has centered on modifying existing models to take advantage of the capabilities of new sensor techniques. There has been enough success with this approach to insure that remote sensing is a powerful tool in modeling the watershed processes. Unfortunately, many of the models in use were designed without recognizing the growth of remote sensing technology. Thus, their parameters were selected to be map or field crew definable. It is believed that the real benefits will come through the evolution of new models having new parameters that are developed specifically to take advantage of our capabilities in remote sensing. The ability to define hydrologically active areas could have a significant impact. The ability to define soil moisture and the evolution of new techniques to estimate evoportransportation could significantly modify our approach to hydrologic modeling. Still, without a major educational effort to develop an understanding of the techniques used to extract parameter estimates from remote sensing data, the potential offered by this new technology will not be achieved.

Ragan, R. M.↗

DOE OSTI2020

The critical role of lignin in lignocellulosic biomass conversion and recent pretreatment strategies: A comprehensive review

Heterogeneity and rigidity of lignocellulose causing resistance to its deconstruction have provided technical and economic challenges in the current biomass conversion processes. Lignin has been considered as a crucial recalcitrance component in biomass utilization. An in-depth understanding of lignin properties and their influences on biomass conversion can provide clues to improve biomass utilization. Also, utilization of lignin can significantly increase the economic viability of biorefinery. Recent lignin-targeting pretreatments have aimed not only to overcome recalcitrance for biomass conversion but also to selectively fractionate lignin for lignin valorization. Numerous studies have been conducted in biomass characteristics and conversion technologies, and the role of lignin is critical for lignin valorization and biomass pretreatment development. In this review, we provide a comprehensive review of lignin-related biomass characteristics, the impact of lignin on the biological conversion of biomass, and recent lignin-targeting pretreatment strategies. The desired lignin properties in biorefinery and future pretreatment directions are also discussed.

09 BIOMASS FUELS↗

DOE OSTI2020

Modeling the processes of soil moisture in regulating microbial and carbon-nitrogen cycling

Soil carbon (C) and nitrogen (N) cycles and their complex responses to hydro-climatic forcing have gained increasing attention. While the temperature effects have been intensively studied, soil moisture response functions (SMRFs) are not well documented for various microbial and enzymatic processes due to the difficulties in directly measuring and differentiating the moisture effects on various processes. In this work we extended our C-only Microbial-ENzyme Decomposition (MEND) model to the C-N coupled MEND model with flexible element stoichiometry. Our model calibration showed good agreement between simulated and observed C:N ratios in soil organic matter and microbial biomass, as well as the ammonium and nitrate concentrations. We show that the selection of SMRFs for specific biogeochemical processes could result in significant differences in model simulated microbial and C-N processes. In particular, it is essential to account for the soil moisture effects on microbial dormancy and resuscitation, as the changes in microbial physiology under favorable or stressful conditions will exert strong controls on soil C and N dynamics. We also advocate the utilization of dynamic (time-variant) data (e.g., litter input, N deposition, soil temperature and moisture), instead of time-invariant data, to drive model simulations and analyses. Dynamic forcing data (particularly dynamic soil moisture) better represent the real-world climate and environmental conditions, which could facilitate more realistic modeling and understanding of soil C and nutrient cycling in a changing world.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

AutoBEM: A scalable framework for nationwide building energy simulation and retrofit evaluation in the United States

This paper presents AutoBEM, an integrated, automated framework for nationwide building energy modeling and retrofit evaluation in the United States. Unlike prior UBEM platforms that either rely primarily on representative stock sampling or operate at city scale, AutoBEM automates the generation of building-resolved, physics-based EnergyPlus/OpenStudio simulation models at national scale using GIS-derived geometry, prototype-based assumptions, and standardized scalable workflows. Leveraging the Model America dataset and high-performance computing, AutoBEM generates and simulates energy models for 122.9 million buildings, representing 97.8% of the U.S. building stock. These models are being made publicly and freely available as the Model America v1.0 (MAv1) dataset. AutoBEM supports detailed, building-level assessments of energy consumption, CO2 emissions, and post-processed anthropogenic heat emissions (AHE), and evaluates 151 energy conservation measures (ECMs) using localized utility pricing and building characteristics. In addition, AutoBEM incorporates both typical and future climate conditions through integration with Typical Meteorological Year (TMY) and Future TMY (fTMY) weather data derived from IPCC scenarios. In a case study of Phoenix, Arizona, AutoBEM identified several high-efficiency HVAC upgrades and selected envelope measures with short modeled payback periods (1.5 years) for certain building types and standards. Simulations under future climate scenarios (SSP5–RCP8.5) project an 11.3% increase in electricity use and a 32% reduction in natural gas demand by 2100, underscoring the need for climate-adaptive retrofit planning. By enabling reproducible, bottom-up, and location-specific analysis at scale, AutoBEM provides a step toward a national digital twin of the built environment and supports data-driven screening and planning for decarbonization, resilience, and energy equity.

Li, Hang [ORNL] (ORCID:0000000306001920)↗

DOE OSTI2026

A Machine Learning based Approach of Estimating Equivalent Circuit Model Parameters at Different SoCs of Li-ion Batteries from Voltage Relaxation

Abstract: In this study, an approach of estimating the equivalent circuit model (ECM) parameters for Li-ion batteries (LIBs) is proposed based on the voltage value at different intervals while relaxing the LIB after discharge. The typical approach for estimating ECM parameters of a LIB is to conduct electrochemical impedance spectroscopy (EIS) measurements at different frequencies and fit them to a predefined circuit model, which requires additional measuring arrangements and specialized devices. The proposed methodology utilizes four different voltages at 0s, 60s, 360s, and 1800s alongside the specific state of charge (SoC) value for a specific constant discharge current value of ~1C until the relaxation stage to train and evaluate three regression-based machine learning models— Support Vector Regression (SVR), Extreme Gradient Boosting (XGBoost), and Gaussian Process Regression (GPR)—for estimating the ECM parameters of the selected model. Bayesian optimization is employed for hyperparameter tuning to achieve optimal performance for all the regressor models, among which, the GPR provided the best performance with the root-mean-squared error (RMSE) of less than 4x10-4 on average for the resistive components and less than 0.27 for capacitive components with excellent R2 scores. The simplicity of the approach enables it to eliminate the need for sophisticated measuring equipment and computation power.

Sagar, Md. Samiul [The University of Alabama (UA)]↗

NASA NTRS1998

Neural Network and Regression Approximations in High Speed Civil Transport Aircraft Design Optimization

Nonlinear mathematical-programming-based design optimization can be an elegant method. However, the calculations required to generate the merit function, constraints, and their gradients, which are frequently required, can make the process computational intensive. The computational burden can be greatly reduced by using approximating analyzers derived from an original analyzer utilizing neural networks and linear regression methods. The experience gained from using both of these approximation methods in the design optimization of a high speed civil transport aircraft is the subject of this paper. The Langley Research Center's Flight Optimization System was selected for the aircraft analysis. This software was exercised to generate a set of training data with which a neural network and a regression method were trained, thereby producing the two approximating analyzers. The derived analyzers were coupled to the Lewis Research Center's CometBoards test bed to provide the optimization capability. With the combined software, both approximation methods were examined for use in aircraft design optimization, and both performed satisfactorily. The CPU time for solution of the problem, which had been measured in hours, was reduced to minutes with the neural network approximation and to seconds with the regression method. Instability encountered in the aircraft analysis software at certain design points was also eliminated. On the other hand, there were costs and difficulties associated with training the approximating analyzers. The CPU time required to generate the input-output pairs and to train the approximating analyzers was seven times that required for solution of the problem.

Patniak, Surya N.↗

NASA NTRS1998

Tailoring Thin Film-Lacquer Coatings for Space Application

Thin film coatings have the capability of obtaining a wide range of thermal radiative properties, but the development of thin film coatings can sometimes be difficult and costly when trying to achieve highly specular surfaces. Given any space mission's thermal control requirements, there is often a need for a variation of solar absorptance (Alpha(s)), emittance (epsilon) and/or highly specular surfaces. The utilization of thin film coatings is one process of choice for meeting challenging thermal control requirements because of its ability to provide a wide variety of Alpha(s)/epsilon ratios. Thin film coatings' radiative properties can be tailored to meet specific thermal control requirements through the use of different metals and the variation of dielectric layer thickness. Surface coatings can be spectrally selective to enhance radiative coupling and decoupling. The application of lacquer to a surface can also provide suitable specularity for thin film application without the cost and difficulty associated with polishing.

Peters, Wanda C.↗

NASA NTRSDate not supplied

Development of Aluminum Feedstock for Additive Manufacturing

The rapid evolution of materials science and manufacturing technologies in recent years has offered new pathways to manipulate materials for bespoke manufacturing. Here we aim to develop feedstocks for applications such as radiator panels, fuel tanks, and structural components for outfitting. As a strong, light weight and thermally conductive material aluminum is ideal for these applications. An often-overlooked source of aluminum waste is food packaging used on the International Space Station. Reusing this waste stream will reduce the cost and logistics of regular sparing. In Space Manufacturing (ISM) will utilize this technology is such areas as sparing and outfitting. However, processing aluminum can present challenges, especially in the context of additive manufacturing and sintering, due to its high reactivity and tendency to form a tenacious oxide layer. Identifying appropriate binders and sintering profiles can overcome these challenges. Herein we present our work on obtaining aluminum powder derived from food packaging, binder selection for aluminum feedstock, and a demonstration of bound metal deposition printing.

aluminum↗

DOE OSTI2024

Reactive Processing of Furan‐Based Monomers via Frontal Ring‐Opening Metathesis Polymerization for High Performance Materials

Frontal ring-opening metathesis polymerization (FROMP) presents an energy-efficient approach to produce high-performance polymers, typically utilizing norbornene derivatives from Diels–Alder reactions. This study broadens the monomer repertoire for FROMP, incorporating the cycloaddition product of biosourced furan compounds and benzyne, namely 1,4-dihydro-1,4-epoxynaphthalene (HEN) derivatives. A computational screening of Diels–Alder products is conducted, selecting products with resistance to retro-Diels–Alder but also sufficient ring strain to facilitate FROMP. The experiments reveal that varying substituents both modulate the FROMP kinetics and enable the creation of thermoplastic materials characterized by different thermomechanical properties. Moreover, HEN-based crosslinkers are designed to enhance the resulting thermomechanical properties at high temperatures (>200 °C). The versatility of such materials is demonstrated through direct ink writing (DIW) to rapidly produce 3D structures without the need for printed supports. This research significantly extends the range of monomers suitable for FROMP, furthering efficient production of high-performance polymeric materials.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Boosting photovoltaic performance of ternary organic solar cells by integrating a multi-functional guest acceptor

Constructing ternary structure is one of the most effective design strategies to break the efficiency ceiling of traditional binary organic solar cells (OSCs). Here, a new Y-series non-fullerene acceptor (Y-T) featuring 1,3-diethyl-2-thiobarbituric acid (DTBA) end groups is developed as a third component for the classical PM6:Y6 binary system. The champion power conversion efficiency of ternary OSCs is increased from 15.64% to 17.37% via incorporating 10 wt% Y-T, with the simultaneously enhanced open-circuit voltage (Voc) of 0.865 V, a short-circuit current density (Jsc) of 26.90 mA/cm 2 , and a fill factor (FF) of 74.97%. The positive contribution of Y-T in the ternary blend can be ascribed to the improved spectroscopic complementarity and enhanced exciton utilization ratio due to the additional energy transfer process. Moreover, Y-T guest acceptor plays a critical role in adjusting the active layer morphology and facilitating three-dimension phase separation, resulting in a balanced charge transport and enhanced FF of ternary OSCs. Overall, this work provides insight into the molecular design of non-fullerene acceptor and suggest guidelines to rationally select guest component for ternary OSCs.

14 SOLAR ENERGY↗

DOE OSTI2024

Community structure and function during periods of high performance and system upset in a full-scale mixed microalgal wastewater resource recovery facility

Microalgae have the potential to exceed current nutrient recovery limits from wastewater, enabling water resource recovery facilities (WRRFs) to achieve increasingly stringent effluent permits. The use of photobioreactors (PBRs) and the separation of hydraulic retention and solids residence time (HRT/SRT) further enables increased biomass in a reduced physical footprint while allowing operational parameters (e.g., SRT) to select for desired functional communities. However, as algal technology transitions to full-scale, there is a need to understand the effect of operational and environmental parameters on complex microbial dynamics among mixotrophic microalgae, bacterial groups, and pests (i.e., grazers and pathogens) and to implement robust process controls for stable long-term performance. Here, we examine a full-scale, intensive WRRF utilizing mixed microalgae for tertiary treatment in the US (EcoRecover, Clearas Water Recovery Inc.) during a nine-month monitoring campaign. We investigated the temporal variations in microbial community structure (18S and 16S rRNA genes), which revealed that stable system performance of the EcoRecover system was marked by a low-diversity microalgal community (D INVSIMPSON = 2.01) dominated by Scenedesmus sp. (MRA = 55 %-80 %) that achieved strict nutrient removal (effluent TP < 0.04 mg·L -1 ) and steady biomass concentration (TSS monthly avg . = 400–700 mg·L −1 ). Operational variables including pH, alkalinity, and influent ammonium (NH 4 + ), correlated positively (p < 0.05, method = Spearman) with algal community during stable performance. Further, the use of these parameters as operational controls along with N/P loading and SRT allowed for system recovery following upset events. Importantly, the presence or absence of bacterial nitrification did not directly impact algal system performance and overall nutrient recovery, but partial nitrification (potentially resulting from NO 2 − accumulation) inhibited algal growth and should be considered during long-term operation. The microalgal communities were also adversely affected by zooplankton grazers (ciliates, rotifers) and fungal parasites (Aphelidium), particularly during periods of upset when algal cultures were experiencing culture turnover or stress conditions (e.g., nitrogen limitation, elevated temperature). Altogether, the active management of system operation in order to maintain healthy algal cultures and high biomass productivity can result in significant periods (>4 months) of stable system performance that achieve robust nutrient recovery, even in winter months in northern latitudes (WI, USA).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

Pivotal trial characteristics and types of endpoints used to support Food and Drug Administration rare disease drug approvals between 2013 and 2022

Background/aims Rare disease drug development faces unique challenges, such as genotypic and phenotypic heterogeneity within small patient populations and a lack of established outcome measures for conditions without previously successful drug development programs. These challenges complicate the process of selecting the appropriate trial endpoints and conducting clinical trials in rare diseases. In this descriptive study, we examined novel drug approvals for non-oncologic rare diseases by the U.S. Food and Drug Administration’s Center for Drug Evaluation and Research over the past decade and characterized key regulatory and trial design elements with a focus on the primary efficacy endpoint utilized as the basis of approval. Methods Using the Food and Drug Administration’s Data Analysis Search Host database, we identified novel new drug applications and biologics license applications with orphan drug designation that were approved between 2013 and 2022 for non-oncologic indications. From Food and Drug Administration review documents and other external databases, we examined characteristics of pivotal trials for the included drugs, such as therapeutic area, trial design, and type of primary efficacy endpoints. Differences in trial design elements associated with primary efficacy endpoint type were assessed such as randomization and blinding. Then, we summarized the primary efficacy endpoint types utilized in pivotal trials by therapeutic area, approval pathway, and whether the disease etiology is well defined. Results One hundred and seven drugs that met our inclusion criteria were approved between 2013 and 2022. Assessment of the 107 drug development programs identified 150 pivotal trials that were subsequently analyzed. The pivotal trials were mostly randomized (80%) and blinded (69.3%). Biomarkers (41.1%) and clinical outcomes (42.1%) were commonly utilized as primary efficacy endpoints. Analysis of the use of clinical trial design elements across trials that utilized biomarkers, clinical outcomes, or composite endpoints did not reveal statistically significant differences. The choice of primary efficacy endpoint varied by the drug’s therapeutic area, approval pathway, and whether the indicated disease etiology was well defined. For example, biomarkers were commonly selected as primary efficacy endpoints in hematology drug approvals (70.6%), whereas clinical outcomes were commonly selected in neurology drug approvals (69.6%). Further, if the disease etiology was well defined, biomarkers were more commonly used as primary efficacy endpoints in pivotal trials (44.7%) than if the disease etiology was not well defined (27.3%). Discussion In the past 10 years, numerous novel drugs have been approved to treat non-oncologic rare diseases in various therapeutic areas. To demonstrate their efficacy for regulatory approval, biomarkers and clinical outcomes were commonly utilized as primary efficacy endpoints. Biomarkers were not only frequently used as surrogate efficacy endpoints in accelerated approvals, but also in traditionally approved rare disease drugs. The choice of primary efficacy endpoints varied by therapeutic area, approval pathway, and understanding of disease etiology.

Hong, Kyungwan [Rare Diseases Team, Office of New ↗

NASA NTRS1978

Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

Mild steel (AISI 1018) was selected as model cold-rolling material and Ti-6Al-4V and INCONEL 718 were selected as typical hot-rolling and cold-rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape-rolling process were developed. These models utilize the upper-bound and the slab methods of analysis, and are capable of predicting the lateral spread, roll-separating force, roll torque and local stresses, strains and strain rates. This computer-aided design (CAD) system is also capable of simulating the actual rolling process and thereby designing roll-pass schedule in rolling of an airfoil or similar shape. The predictions from the CAD system were verified with respect to cold rolling of mild steel plates. The system is being applied to cold and hot isothermal rolling of an airfoil shape, and will be verified with respect to laboratory experiments under controlled conditions.

Lahoti, G. D.↗

NASA NTRS1996

Design of intelligent mesoscale periodic array structures utilizing smart hydrogel

Mesoscale Periodic Array Structures (MPAS, also known as crystalline colloidal arrays), composed of aqueous or nonaqueous dispersions of self-assembled submicron colloidal spheres are emerging toward the development of advanced optical devices for technological applications. This is because of their unique optical diffraction properties and the ease with which these intriguing properties can be modulated experimentally. Moreover our recent advancements in this area which include 'locking' the liquid MPAS into solid or semisolid polymer matrices for greater stability with longer life span, and incorporation of CdS quantum dots and laser dyes into colloidal spheres to obtain nonlinear optical (NLO) responses further corroborate the use of MPAS in optical technology. Our long term goal is fabrication of all-optical and electro-optical devices such as spatial light modulators for optical signal processing and flat panel display devices by utilizing intelligent nonlinear periodic array structural materials. Here we show further progress in the design of novel linear MPAS which have the ability to sense and respond to an external source such as temperature. This is achieved by combining the self-assembly properties of polymer colloidal spheres and thermoshrinking properties of smart polymer gels. At selected temperatures the periodic array efficiently Bragg diffracts light and transmits most of the light at other temperatures. Hence these intelligent systems are of potential use as fixed notch filters optical switches or limiters to protect delicate optical sensors from high intensity laser radiation.

Sunkara, H. B.↗