Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “unit dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Hybrid-Learning Algorithm for Online Dynamic State Estimation in Multimachine Power Systems

With the increasing penetration of distributed generators in the smart grids, having knowledge of rapid real-time electromechanical dynamic states has become crucial to system stability control. Conventional Supervisory Control and Data Acquisition (SCADA)-based dynamic state estimation (DSE) techniques are limited by the slow sampling rates, while the emerging phasor measurement units (PMUs) technology enables rapid real-time measurements at network nodes. Using generator bus terminal voltages, we propose a hybrid-learning DSE (HL-DSE) algorithm to estimate the synchronous machine rotor angle and speed in real time. The HL-DSE takes the power system model into account and trains neuroestimators with real-time data in an online manner. Compared with traditional DSE methods, the HL-DSE overcomes limitations by using a data-driven approach in conjunction with the physical power system model. The time efficiency, accuracy, convergence, and robustness of the proposed algorithm are tested under noises and fault conditions in both small- and large-scale test systems. Simulation results show that the proposed HL-DSE is much more computationally efficient than widely used Kalman filter (KF)-based methods while maintaining comparable accuracy and robustness. In particular, HL-DSE is over 100 times faster than square-root unscented KF (SR-UKF) and 80 times faster than extended KF (EKF). The advantages and challenges of the HL-DSE are also discussed.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Molecular Mechanisms Underlying Surfactant-Based Plastics De-Inking

Surfactant-mediated binder removal is critical for de-inking pretreatment in plastics recycling, yet the molecular mechanisms governing surfactant performance remain poorly understood. We used all-atom (AA) and coarse-grained (CG) molecular dynamics (MD) simulations alongside alkaline surfactant washing experiments to investigate interactions between a series of surfactants and a polyether urethane (PEU) binder in solution and on a polyethylene (PE) surface. Experiments reveal a range of de-inking efficiencies, ranging from <25 to >95% depending upon surfactant headgroup charge and tail length. AA simulations reveal that charged surfactants reach stable levels of surfactant coverage, while nonionic surfactants aggregate on the binder. CG umbrella sampling calculations quantify the thermodynamics of binder desorption in water. In ∼0.25 M surfactant solutions, up to a 52% reduction in the free energy barrier is computed, with trends in good agreement (R 2 = 0.92, Pearson’s r = –0.96, Spearman’s ρ = –0.83) with experimental de-inking efficiencies. We find that charged surfactants are more effective than nonionic surfactants for de-inking and propose three regimes of surfactant de-inking processes: good de-inking occurs in surfactants that promote PEU desorption with a low radius of gyration (R g ); moderate de-inking occurs when surfactants stabilize PEU but increase R g ; poor de-inking occurs in surfactants that aggregate on the binder and promote extensive anchoring to the surface. Overall, these molecular-level insights have the potential to guide the design of surfactant formulations for plastics recycling applications.

ink removal↗
DOE OSTI2025

Design of Experiments for Dynamic Test Runs in Solvent-Based CO 2 Capture Pilot Plants

Test runs in the pilot plants consume significant resources, and therefore, the learning from test runs should be maximized. Test runs conducted in the pilot plants are often steady state. It takes several hours for reaching steady-state in the pilot plants, and thus, the duration of the test runs needs to be long even for collecting few steady-state data points. On the other hand, a large number of measurements can be collected through dynamic test runs in a short span of time. This paper presents a systematic design of dynamic experiments (DoDEs) for identifiability of model parameters, which is achieved by persistently exciting the inputs signals. A pseudorandom binary sequence (PRBS) is designed as the input signal for DoDE due to its efficiency in obtaining sufficient spectral content. However, due to the long sequence size of the PRBS signal, a Schroeder-phase input signal, which is a multisine signal, is also designed. Tests for both types of signals are run in the Pilot Solvent Test Unit (PSTU) at the National Carbon Capture Center in Wilsonville, Alabama. The transient data are used to solve dynamic data reconciliation and parameter estimation problem. The estimated parameters are found to be not only superior to those estimated from using data collected from hundreds of steady-state test runs in a nonreactive (air–water) system, but the parameters could be estimated by using the dynamic data collected for about 24 h from the pilot plant for the MEA-H 2 O–CO 2 system.

CO2 capture↗
DOE OSTI2025

Benchmark study of a new simplified DFN model for shearing of intersecting fractures and faults

It is challenging to quantitatively predict shearing of intersecting fractures/faults because of dynamic frictional contacts accompanied by possible nonlinear rock deformation. To address such challenges, a new conceptual model—the simplified DFN model—was proposed and validated by Hu et al. 46 to use major paths (MPs) to represent complicated DFNs for calculation of shearing. In this work, we conducted a benchmark study for three examples that involve different levels of complexity of intersecting fractures, and correspondingly different numbers of MPs. The codes and software that were used in the benchmark cover a range of continuum, discontinuum and hybrid numerical methods: NMM (LBNL), FLAC3D (LBNL), GBDEM (KIGAM), FRACOD (DynaFrax), and CASRock (CAS). The general consistency between DFN and MP cases as predicted by all the codes/software demonstrates that major paths can be used to simplify the geometry of DFNs in a wide range of software. Disagreement in results made by some software and potential future improvements are discussed. We show that (1) shearing of one or multiple major fractures can be reduced if there are multiple smaller intersecting fractures in that area, which is a useful basis for understanding and controlling induced seismicity and merits further analysis, and (2) the agreement achieved in the benchmark examples provide confidence that the simplified DFN model is a promising conceptual model that can be used for different types of numerical approaches and software for simplifying the analysis of the shearing of intersecting fractures and faults.

58 GEOSCIENCES↗
DOE OSTI2025

Interface‐Controlled Redox Chemistry in Aqueous Mn 2 ⁺/MnO₂ Batteries

Manganese dioxide (MnO 2 ) deposition/dissolution (Mn 2+ /MnO 2 ) chemistry, involving a two-electron-transfer process, holds promise for safe and eco-friendly large-scale energy storage. However, challenges like electrode/electrolyte interface environment fluctuations (H + and H 2 O activity), irreversible Mn degradation, and limited understanding of degradation mechanisms hinder the reversibility of the Mn 2+ /MnO 2 conversion. This study demonstrates a vanadyl/pervanadyl (VO 2+ /VO 2 + ) redox-mediated interface designed for high-energy Mn 2+ /MnO 2 batteries. Unlike flow systems, this work uncovers, for the first time, the mechanism of a static redox-mediated interface in regulating interfacial H + and H 2 O activities. Significantly, the VO 2+ /VO 2 + chemical redox mediation targets Mn 3+ intermediates, suppressing their hydrolysis and enabling 100% Mn 2+ /MnO 2 conversion. The redox-mediated interface enhances the Mn redox electron transfer process, achieving a stable ≈95% coulombic efficiency and ultrahigh capacity of 100 mAh cm −2 with an areal energy density of 111 mWh cm −2 , outperforming flow systems. The electrode also exhibits an average specific capacity of 593 mAh g −1 , approaching the theoretical limit of 616 mAh g −1 , and a specific energy density of 721 Wh kg −1 at high MnO 2 loadings (50–150 mg cm −2 ). Furthermore, the findings highlight the critical role of interfacial redox mediation in regulating H + and H 2 O activities and underscore the significance of interface dynamics.

Xue, Xinzhe [University of California, Santa Cruz,↗
DOE OSTI2025

Transient Terahertz Oscillations During Photoinduced Polarization Topology Reconfiguration in Ferroelectric Superlattices

Terahertz resonances embedded in crystalline heterostructures could close a spectral gap between conventional electronics and photonics while opening new windows on non-equilibrium lattice dynamics. We show that femtosecond optical screening of the depolarization field in epitaxial PbTiO3/SrTiO3 superlattices launches a collective polar mode that oscillates near 1 THz and coherently spans the entire mini-Brillouin zone. Wave-vector-resolved pump–probe X-ray diffraction resolves a nearly dispersion-less oscillation at 0.87 THz and 0.94 THz at the zone boundary and zone center, respectively, persisting for ~2.5 ps, corresponding to a weakly damped resonance. Dynamical phase-field simulations reveal the origin of the mode to mesoscopic rotation of closure-domain textures during the photo-excited transition from an unscreened to a screened electrostatic state. Varying the PbTiO3 and SrTiO3 ratio tunes the mode frequency continuously from 0.9 to 1.4 THz, providing a quantitative design rule for frequency-selectable THz oscillators in ferroelectric heterostructures. By coupling nanoscale polarization reconfiguration to long-wavelength coherent dynamics, this work establishes depolarization-field engineering to topology-driven THz functionality and expanding the landscape of collective lattice dynamics.

Sri Gyan, Deepankar [Univ. of Wisconsin, Madison, ↗
DOE OSTI2025

A rheological model for loose sands with insights from DEM

A rheological model for loose granular media is developed to capture both solid-like and fluid-like responses during shearing. The proposed model is built by following the mathematical structure of an extended Kelvin–Voigt model, where an elastic spring and plastic slider act in parallel to a viscous damper. This arrangement requires the partition of the total stress into rate-independent and rate-dependent stress components. To model the solid-like behavior, a simple frictional plasticity model is adopted without modifications, thus contributing to the rate-independent stress. Instead, the fluid-like or rate-dependent stress is further decomposed into deviatoric and volumetric parts, by proposing a new formulation based on a combination of the μ(I) relation, originally developed under pressure-controlled shear, with a pressure-shear rate relation derived under volume-controlled shear. The proposed formulation allows the model to capture both the increase in the friction coefficient and the enhanced dilation at high shear rates. High-fidelity simulation data, obtained from discrete element method and multiscale modelling, are used to evaluate the performance of the proposed constitutive model. The model provides accurate results under both drained and undrained simple shear paths across a wide range of shear rates. Furthermore, it successfully reproduces at much lower computational cost the flowslide mobility computed through multiscale simulations, which is primarily regulated by the shear rate dependence of the material properties during the dynamic runout stage.

Elasticity↗
DOE OSTI2025

Multi-objective automatic discovery of optimized metamaterials for varying velocity impact protection

Mechanical metamaterials have demonstrated exceptional impact performance while remaining lightweight. Impact resistance has traditionally been investigated using quasi-static simulations, often with the assumption that performance will translate to high-velocity impact scenarios. However, critical crash protection parameters—such as peak stress and absorbed energy—are highly sensitive to impact velocity, leading to inconsistent performance under dynamic loading. To address this, we introduce a strain-rate-aware, active deep learning framework that enables multi-objective optimization of impact protection metrics across a wide range of impact velocities. Our framework captures the strain-rate sensitivity of architected lattices by learning to control spatial gradation in cellular metamaterials, resulting in over 200 % enhancement in impact protection relative to state-of-the-art designs such as Voronoi and re-entrant lattices. We demonstrate its practical utility by designing next-generation lattice structures for automotive bumper systems that satisfy multiple, velocity-specific safety criteria—capabilities beyond those of conventional designs. More than just a predictive tool, this framework marks the first step towards enabling adaptable impact-resistant structures across dynamic regimes.

Deep learning↗
DOE OSTI2025

Groundwater flowpath characteristics drive variability in per- and polyfluoroalkyl substances (PFAS) loading across a stream-wetland system

Groundwater dependent ecosystems in areas with industrial and military land use are at risk of direct exposure to a wide range of contaminants, including PFAS chemicals. Glaciated terrain often has mixed high and low permeability sediments coupled with groundwater flow-through lake features. These hydrogeologic attributes create highly complex ‘source to seep’ dynamics that make spatiotemporal contaminant transport patterns difficult to predict. We investigated one such system in detail using a suite of heat-tracing and chemical methods. Numerous (n=57) preferential groundwater discharge zones (vertical flux rates ranging 0.2 to 3.2 m/d) were identified across the upper Quashnet River stream-wetland system in Mashpee, MA, USA, adjacent to an Air Force Base with several known PFAS source areas. Surface-water and groundwater samples were collected and analyzed (n=145) for precursors and terminal PFAS compounds between March and September 2022. Samples were collected at identified seeps along the Quashnet River (n=59), from wells upgradient from the stream-wetland system (n= 44), from contributing flow-through kettle lakes (n=8), and at multiple locations along the Quashnet River (n=34). Samples from seeps and wells had measured PFAS concentrations ranging from non-detect to approximate 3,500 ng/L (mean= 1,650 ng/L), and a range of deuterium excess values (3.2 to 15.9 per mil) indicative of varying degrees of groundwater-lake interaction prior to emergence at the discharge zones. Groundwater-lake interaction along flowpaths that sourced the sampled seeps was farther supported by significant correlations (p < 0.01) between deuterium excess and %PFAS precursors, and between %PFAS precursors and multiple terminal PFAS compounds (e.g., PFPeS, PFBS, PFHxS). However, some sampled seeps contributing groundwater to the stream-wetland system had much higher total PFAS concentrations (>1000 ng/L) than the upgradient kettle lakes, despite showing lake (evaporative) isotopic signatures, indicating the potential for groundwater flowpath convergence at wetland discharge zones and the influence of lakebed PFAS precursor reactions. PFAS compounds and water isotopic composition at sampled multilevel groundwater wells, rivers, lakes, and seeps suggest that a complex mixture of source groundwater and flowpath characteristics are responsible for diverse observed PFAS mixtures at preferential discharge zones across the stream-wetland system. Further, total PFAS loading patterns to the Quashnet River via groundwater discharge remained remarkably similar from winter to summer to fall conditions, despite a regional dry period in late summer 2022 with the upper river channel completely drying. This work addresses gaps in the existing PFAS literature by demonstrating the importance of subsurface fate and transport on PFAS compound concentrations in controlling contaminant mass loading in preferential groundwater discharge zones and presents a transferrable field toolkit for efficient characterization of spatially preferential PFAS transport dynamics.

Contaminant transport↗
DOE OSTI2025

Fermi-Based Kinetic Model for the Sabatier Reaction: Sabatier Principle and Beyond It

The CO 2 methanation reaction (aka the Sabatier reaction) is one of the important carbon utilization technologies to reduce atmospheric greenhouse gases. In this study, kinetic modeling of the Sabatier reaction proceeding via the CO route has been presented by considering weak and strong chemisorption concepts rooted in electronic theory. Based on the single-route mechanism of the Sabatier reaction, the dependence of the reaction rate on the position of the catalyst Fermi level with respect to the antibonding states of the reagent (CO 2 ) and the product (CH 4 ), is demonstrated with the classic Sabatier volcano-shape. Furthermore, the model was applied to explain experimental results of reaction rates for Ni- and Ru-based catalytic systems and to understand origin of enhancement of turnover frequencies established for dynamic catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dynamic Behavior of Bound Interlayer Excitons in Interlayer-Doped Cs 3 Bi 2 Br 9 Vacancy-Ordered Perovskite

Interlayer doping of the vacancy-ordered 2D perovskite Cs 3 Bi 2 Br 9 (CBB) enables the formation of bound interlayer excitons (BIEs), a unique charge-transfer excited state within the layered solid. BIEs previously reported with silver (Ag + ) as an interlayer dopant exhibited bright broadband photoluminescence (PL) with prolonged lifetime at room temperature, offering potential applications in efficient white light emission, photocatalysis, and optoelectronics. However, the dynamic behavior of radiation and excited carriers remains poorly understood due to the limitations of ensemble spectroscopic measurements. Here, we investigate the temperature-dependent dynamics of Ag-doped Cs 3 Bi 2 Br 9 (Ag-CBB) using single-particle time-resolved PL spectroscopy and ultrafast transient absorption imaging. Single-particle PL measurements reveal three distinct emission regimes across temperature: (i) BIE-dominant emission at high temperatures, (ii) a mixture of radiation from BIEs and self-trapped excitons (STEs) at intermediate temperatures, and (iii) STE-dominant emission below 100 K. Rapid transient absorption mapping using Parallel Rapid Imaging with Spectroscopic Mapping (PRISM) reveals subpicosecond STE formation in pristine CBB and long-lived photoinduced absorption by BIEs, consistent with electron–hole separation and suppressed STE transfer. The spatial uniformity of these signals confirms homogeneous Ag doping across single crystals. These findings highlight the role of Ag interlayer dopants in governing the BIE dynamics.

bound interlayer exciton↗
DOE OSTI2025

Supramolecular Effects of Alkyl Sulfonates in Silver Nanocrystal Synthesis

While cationic surfactants such as hexadecyltrimethylammonium bromide (CTAB) are ubiquitous in the synthesis of noble metal nanocrystals, anionic surfactants are rarely used. This work explores the addition of sodium alkyl sulfonates with chain lengths ranging from one to eight carbons to a silver nanoplatelet reaction. Short-chain sulfonates comprised of one to four carbons show little effect on the nanocrystal synthesis, but alkyl sulfonates comprised of five or more carbons at concentrations above 1 mM have a pronounced effect on the absorbance of the nanocrystals, causing a blueshift in the wavelength of maximum absorbance (λ max ) from approximately 800 to 400 nm as the sulfonate concentration is increased to 7 mM. Higher concentrations of sulfonate result in a subsequent red-shift of the peak. Investigation into the possible formation mechanisms responsible for this synthetic control revealed the absence of sulfonate micelles under the reaction conditions. Instead, we hypothesize that sulfonate bilayers are nucleated around the silver nanocrystals at concentrations below the critical micelle concentration and interact with either the citrate ligands or the silver surface to influence nanocrystal morphology, and thus absorbance. Strikingly, the addition of long-chain alkyl sulfonates to already-synthesized nanocrystals results in similar changes to the nanocrystal absorbance that occur within seconds, providing further support for the proposal that these effects are related to the surface chemistry of the nanocrystals, which appear to be highly dynamic.

alkyls↗
DOE OSTI2025

Efficient up-conversion in CsPbBr 3 nanocrystals via phonon-driven exciton-polaron formation

Lead halide perovskite nanocrystals demonstrate efficient up-conversion, although the precise mechanism remains a subject of active research. This study utilizes steady-state and time-resolved spectroscopy methods to unravel the mechanism driving the up-conversion process in CsPbBr 3 nanocrystals. Employing above- and below-gap photoluminescence measurements, we extract a distinct phonon mode with an energy of ~7 meV and identify the Pb-Br-Pb bending mode as the phonon involved in the up-conversion process. This result was corroborated by Raman spectroscopy. We confirm an up-conversion efficiency reaching up to 75%. Transient absorption measurements under conditions of sub-gap excitation also unexpectedly reveal coherent phonons for the subset of nanocrystals undergoing up-conversion. This coherence implies that the up-conversion and subsequent relaxation is accompanied by a synchronized and phased lattice motion. This study reveals that efficient up-conversion in CsPbBr 3 nanocrystals is powered by a unique interplay between the soft lattice structure, phonons, and excited states dynamics.

Anti-Stokes Photoluminescence↗
DOE OSTI2026

Electron-ion equilibration in superheated gold

Electron-ion equilibration dynamics in samples driven into superheated states with multi-eV electron temperatures represent a fundamental process in nonequilibrium physics. A clear picture of the evolving ion temperature is essential for understanding the strength of the electron-ion coupling. However, direct, model-independent measurements of the ion temperature in laser-irradiated samples have remained experimentally elusive. Using inelastic X-ray scattering with meV-resolution in gold samples, the ion response to ultrafast heating by the hot electrons can be resolved, quantifying the electron-ion equilibration dynamics. We report measurements revealing a strongly enhanced energy transfer rate compared to that in weakly excited gold. Moreover, we obtain a quasi-constant electron-ion coupling at the highly elevated electron temperatures. These results place new constraints on electron-ion energy transfer in warm dense matter and establish a path toward quantitative benchmarking of models for nonequilibrium dynamics.

Griffin, Travis D. [Univ. of Nevada, Reno, NV (Uni↗
DOE OSTI2025

Inverse mapping of properties to composition through generative modeling for designing molten salts

Generative modeling (GM) has been increasingly used for the inverse design and optimization of materials, yet its application to molten salt mixtures remains unexplored despite how a successful approach to the inverse design of molten salts would contribute to efficiently exploiting their customizability and unlocking their advantages in applications, such as energy production and energy storage. This work presents a workflow for the inverse design of molten salts with targeted density values, addressing the challenge of representing these complex mixtures in GM. A dataset of critically evaluated molten salt densities is used to train a variational autoencoder coupled with a predictive deep neural network, which then can be used to generate new molten salt compositions with desired density values. The effectiveness of the approach is demonstrated by designing mixtures with distinct densities and validating the predicted values using ab initio molecular dynamics simulations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Multiframe X-ray diffraction on the OMEGA EP laser

A method of measuring multiple temporally resolved powder x-ray diffraction measurements during a single dynamic compression laser experiment has been demonstrated on the OMEGA EP laser. Up to four time-gated snapshots of the x-ray diffraction pattern are collected on an ultrafast x-ray framing camera with a 2θ scattering angle coverage of 48°–65° and 400-ps temporal resolution with the potential for 10°–160° and 200-ps resolution. X-ray diffraction snapshots capture the transformation to a high-pressure β phase in ramp-compressed Zr, constraining the atomic structure and pressure–density equation-of-state in a single shot. Here, this platform will be used to constrain transition pressures, understand the role of kinetics, and verify the existence of hysteresis and metastability on phase transformations at the lattice level under single-shot dynamic compression.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Observed declines in upper ocean phosphate-to-nitrate availability

Climate warming is increasing ocean stratification, which in turn should decrease the nutrient flux to the upper ocean. This may slow marine primary productivity, causing cascading effects throughout food webs. However, observing changes in upper ocean nutrients is challenging because surface concentrations are often below detection limits. We show that the nutricline depth, where nutrient concentrations reach well-detected levels, is tied to productivity and upper ocean nutrient availability. Next, we quantify nutricline depths from a global database of observed vertical nitrate and phosphate profiles to assess contemporary trends in global nutrient availability (1972–2022). We find strong evidence that the P-nutricline (phosphacline) is mostly deepening, especially throughout the southern hemisphere, but the N-nutricline (nitracline) remains mostly stable. Earth System Model (ESM) simulations support the hypothesis that reduced iron stress and increased nitrogen fixation buffer the nitracline, but not phosphacline, against increasing stratification. These contemporary trends are expected to continue in the coming decades, leading to increasing phosphorus but not nitrogen stress for marine phytoplankton, with important ramifications for ocean biogeochemistry and food web dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Bistable random momentum transfer in a linear on-chip resonator

Optical switches and bifurcation rely on the nonlinear response of materials. Here, we demonstrate linear temporal bifurcation responses in a passive multimode microresonator, with strongly coupled chaotic and whispering gallery modes (WGMs). In microdisks, the chaotic modes exhibit broadband transfer within the deformed cavities, but their transient response is less explored and yields a random output of the analog signal distributed uniformly from “0” to “1.” Here, we build chaotic states by perturbing the multimode microring resonators with densely packed silicon nanocrystals on the waveguide surface. In vivo measurements reveal random and “digitized” output that ONLY populates around 0 and 1 intensity levels. The bus waveguide mode couples first to chaotic modes, then either dissipates or tunnels into stable WGMs. This binary pathway generates high-contrast, digitized outputs. In conclusion, the fully passive device enables real-time conversion of periodic clock signals into binary outputs with contrasts exceeding 12.3 dB, data rates of up to 10 7 · bits per second, and 20 dB dynamic range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗