Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transient electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Interfacial Charge Transfer in Lead Sulfide/Cadmium Sulfide Quantum Dot–Monolayer Molybdenum Disulfide Heterostructures

We investigate the ultrafast interfacial charge transfer dynamics in mixed-dimensional PbS/CdS quantum dot (QD)–monolayer MoS 2 heterostructures exhibiting a type-II band alignment. These 0D–2D heterostructures were assembled using oleic acid-capped PbS/CdS QDs with systematically varied core sizes deposited onto molecular beam epitaxy-grown monolayer MoS 2 . Steady-state and time-resolved optical spectroscopies revealed pronounced bidirectional charge transfer between the 0D and 2D components, involving both electron and hole exchange across the interface. The quenching of the monolayer MoS 2 A-exciton bleach and the modifications of its decay dynamics provide direct evidence for efficient hole transfer from photoexcited MoS 2 into the PbS QD core. Concurrently, attenuation of the QD ground-state bleach and the emergence of ultrafast decay components confirmed electron transfer from photoexcited QDs to monolayer MoS 2 . Both hole and electron transfer processes are dependent on the QD core size, with smaller cores enabling faster transfer rates and higher efficiencies due to enhanced band offsets and interfacial coupling. The complementary insights gained from transient absorption and time-resolved photoluminescence measurements clarify the mechanisms governing interfacial carrier exchange and highlight the importance of both hole and electron transfer as key components in the functioning of such 0D–2D heterostructures. This study underscores the potential of 0D–2D semiconductor heterostructures for advanced optoelectronic and light-energy conversion applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Phase segregation dynamics in mixed-halide perovskites revealed by plunge-freeze cryo-electron microscopy

Mixed-halide lead perovskites, with photoexcited charge-carrier properties suitable for high-efficiency photovoltaics, hold significant promise for high-efficiency tandem solar cells. However, phase segregation under illumination, where an iodide-rich phase forms carrier trap states, remains a barrier to application. This study employs plunge-freeze cryoelectron microscopy to visualize nanoscale phase segregation dynamics in CsPb(Br x I 1–x ) 3 films. By rapidly freezing the illuminated samples, we preserve transient photoexcited ion distributions for high-resolution structural and compositional analysis at the nanoscale. Cryogenic scanning transmission electron microscopy (STEM) techniques (electron energy loss spectroscopy [EELS] and 4D-STEM) captured the dynamics of photo-induced iodine migration from grain boundaries to centers, identified the buildup of anisotropic strain, and captured the heterogeneous evolution of this process within a single grain. These findings provide insight into microscopic phase segregation mechanisms and their dynamics, enhancing our understanding of mixed-halide perovskite photostability.

42 ENGINEERING↗
DOE OSTI2022

Tuning Photoexcited Charge Transfer in Imine-Linked Two-Dimensional Covalent Organic Frameworks

The generation of a long-lived charge-separated state in versatile π-conjugated two-dimensional covalent organic frameworks (2D COFs), a process essential to extending their great potentials in advanced semiconducting applications, is yet fully elucidated. Herein, we report a systematic investigation of the photophysical properties of three highly crystalline imine-linked 2D COFs using steady-state and transient absorption spectroscopy accompanied by time-dependent density functional theory (TDDFT) calculations. The different electron affinity between 5,5',5''-(1,3,5-benzenetriyl)-tris(2-pyridinecarboxaldehyde) (BTPA) and three tunable electron-donating/accepting triamine monomers dominated the formation of the excited state, charge transfer direction and lifetime. A prominent charge transfer from electron-rich 4,4',4''-triaminotriphenylamine (TAPA) to BTPA in COFTAPA-BTPA led to the long-lived charge-separated state, which was attributed to a greater degree of delocalization compared to the two other COFs. Furthermore, these results provide fundamental insight into the importance of structure-property correlation for designing advanced photoactive 2D COF materials with the efficient charge transfer and long-lived charge-separated state.

14 SOLAR ENERGY↗
DOE OSTI2025

Co‐Doping Approach for Enhanced Electron Extraction to TiO 2 for Stable Inorganic Perovskite Solar Cells

Inorganic perovskite CsPbI 3 solar cells hold great potential for improving the operational stability of perovskite photovoltaics. However, electron extraction is limited by the low conductivity of TiO 2 , representing a bottleneck for achieving stable performance. In this study, a co‐doping strategy for TiO 2 using Nb(V) and Sn(IV), which reduces the material's work function by 80 meV compared to Nb(V) mono‐doped TiO 2 , is introduced. To gain fundamental understanding of the processes at the interfaces between the perovskite and charge‐selective layer, transient surface photovoltage measurements are applied, revealing the beneficial effect of the energetic and structural modification on electron extraction across the CsPbI 3 /TiO 2 interface. Using 2D drift‐diffusion simulations, it is found that co‐doping reduces the interface hole recombination velocity by two orders of magnitude, increasing the concentration of extracted electrons by 20%. When integrated into n–i–p solar cells, co‐doped TiO 2 enhances the projected T S80 lifetimes under continuous AM1.5G illumination by a factor of 25 compared to mono‐doped TiO 2 . This study provides fundamental insights into interfacial charge extraction and its correlation with operational stability of perovskite solar cells, offering potential applications for other charge‐selective contacts.

14 SOLAR ENERGY↗
DOE OSTI2020

Distinguishing Electron and Hole Dynamics in Functionalized CdSe/CdS Core/Shell Quantum Dots Using Complementary Ultrafast Spectroscopies and Kinetic Modeling

The evolution of excitation energy and photogenerated charges in semiconductor quantum dots (QDs) functionalized with molecular acceptors can be probed on ultrafast time scales using techniques such as transient absorption (TA) spectroscopy. However, historical interpretations that the 1S(e)-1S 3/2 (h) transition in Cd-chalcogenide QDs is fully attributable to electrons may be misleading, and multiexponential models used to fit TA kinetics do not correspond directly to specific photophysical processes. Here, we present visible-wavelength and mid-IR TA and time-resolved photoluminescence measurements to inform a comprehensive kinetic model of the photoexcited CdSe/CdS core/shell QDs functionalized with passivating oleic acid (OA), hole-accepting ferrocene, or electron-accepting naphthalene bisimide (NBI). We show that ~30% of the 1S signal and 72% of the IR signal can originate from holes in well-passivated core/shell QDs. We also demonstrate evidence of electron trapping in OA-capped core/shell QDs, with additional electron transfer and hole trapping in the QDs functionalized with NBI. Electron (hole) trapping and detrapping occur in 450 ± 100 ps (430 ± 70 ps) and 340 ± 100 ps (1.1 ± 0.4 ns) respectively, while the time constant for electron transfer to NBI is ~1.8 ns. The comprehensive picture of photophysical processes provided by the complementary ultrafast techniques and kinetic modeling can accelerate both the fundamental science and application development of nanostructured and molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2008

Total Dose Effects on Single Event Transients in Linear Bipolar Systems

Single Event Transients (SETs) originating in linear bipolar integrated circuits are known to undermine the reliability of electronic systems operating in the radiation environment of space. Ionizing particle radiation produces a variety of SETs in linear bipolar circuits. The extent to which these SETs threaten system reliability depends on both their shapes (amplitude and width) and their threshold energies. In general, SETs with large amplitudes and widths are the most likely to propagate from a bipolar circuit's output through a subsystem. The danger these SET pose is that, if they become latched in a follow-on circuit, they could cause an erroneous system response. Long-term exposure of linear bipolar circuits to particle radiation produces total ionizing dose (TID) and/or displacement damage dose (DDD) effects that are characterized by a gradual degradation in some of the circuit's electrical parameters. For example, an operational amplifier's gain-bandwidth product is reduced by exposure to ionizing radiation, and it is this reduction that contributes to the distortion of the SET shapes. In this paper, we compare SETs produced in a pristine LM124 operational amplifier with those produced in one exposed to ionizing radiation for three different operating configurations - voltage follower (VF), inverter with gain (IWG), and non-inverter with gain (NIWG). Each configuration produces a unique set of transient shapes that change following exposure to ionizing radiation. An important finding is that the changes depend on operating configuration; some SETs decrease in amplitude, some remain relatively unchanged, some become narrower and some become broader.

Buchner, Stephen↗
DOE OSTI2021

Efficient interlayer electron transfer in a MoTe 2 /WS 2 /MoS 2 trilayer heterostructure

Electron transfer and carrier dynamics in MoTe 2 /WS 2 /MoS 2 trilayer heterostructures are investigated by transient absorption and photoluminescence measurements. Monolayer flakes of MoTe 2 , WS 2 , and MoS 2 are obtained by mechanical exfoliation from their bulk crystals and are used to fabricate the heterostructures by a dry-transfer technique. Here, photoluminescence spectroscopic measurements indicate that the recombination of the MoS 2 and WS 2 intralayer excitons is significantly suppressed in the heterostructure, illustrating the efficient interlayer charge transfer processes. Layer-selective time-resolved differential reflectance measurements show that the electrons excited in MoTe 2 can transfer to MoS 2 within 0.3 ps. The transferred electrons show a long lifetime of several hundred picoseconds due to their slow recombination with the spatially separated holes that reside in MoTe 2 . Furthermore, the charge transfer and recombination processes are weakly dependent on the injected carrier density. These results demonstrate the feasibility of constructing van der Waals multilayer heterostructures involving the infrared-sensitive MoTe 2 with emergent properties and provide important information to quantify the performance of MoTe 2 - based devices.

2D materials↗
DOE OSTI2020

Direct Observation of Bandgap Oscillations Induced by Optical Phonons in Hybrid Lead Iodi.de Perovskites

Hybrid organic-inorganic perovskites such as methylammonium lead iodide have emerged as promising semiconductors for energy-relevant applications. The interactions between charge carriers and lattice vibrations, giving rise to polarons, have been invoked to explain some of their extraordinary optoelectronic properties. Here, time-resolved optical spectroscopy is performed, with off-resonant pumping and electronic probing, to examine several representative lead iodide perovskites. The temporal oscillations of electronic bandgaps induced by coherent lattice vibrations are reported, which is attributed to antiphase octahedral rotations that dominate in the examined 3D and 2D hybrid perovskites. The off-resonant pumping scheme permits a simplified observation of changes in the bandgap owing to the A(g) vibrational mode, which is qualitatively different from vibrational modes of other symmetries and without increased complexity of photogenerated electronic charges. The work demonstrates a strong correlation between the lead-iodide octahedral framework and electronic transitions, and provides further insights into the manipulation of coherent optical phonons and related properties in hybrid perovskites on ultrafast timescales.

coherent optical phonons↗
DOE OSTI2026

Electrochemical Modeling of PID Leakage Current of PV Modules: Steady-State Current, Transient Current, and RC-Equivalent Circuit

Potential-induced degradation (PID) remains a significant reliability concern for photovoltaic (PV) modules, arising when a voltage difference between the module frame and the solar cells drives unintended leakage current through the glass-encapsulant stack. Although PID ultimately manifests as PID-s, PID-p, or PID-c, the underlying behavior of the leakage current-its magnitude and time dependence-requires clearer electrochemical interpretation. Traditional explanations attribute the initial transient current to bulk capacitive elements of the glass, encapsulant, and antireflection coatings, and the steady-state current according to their effective ohmic resistance. More recent studies, however, indicate that electrochemical charge-transfer processes at the encapsulant-metallization interface can play a dominant role in defining the leakage-current path. This paper develops a unified electrochemical framework for modeling PID leakage current. First, an RC-equivalent circuit is formulated by combining conventional RC elements with a Randles-type interface to capture transient leakage current through double-layer capacitance and faradaic processes at ionic-electronic boundaries. Second, the steady-state current-voltage behavior is explained using a linearized Butler-Volmer relationship, showing that the measured ohmic response corresponds to the low-overpotential limit of charge-transfer kinetics. Analytical results demonstrate that, for typical module materials-3.2-mm soda-lime glass and 0.45-mm encapsulant-the dominant modulators to PID leakage current are the glass surface resistance (under dry-surface conditions), the glass bulk capacitance, and the encapsulant resistance (under wet-surface conditions), with soda lime glass surface and EVA/POE encapsulant resistances primarily governing steady-state current. The proposed electrochemical model is validated against measured leakage-current data, showing good agreement in both the magnitude and the time-dependent evolution of PID leakage current.

14 SOLAR ENERGY↗
DOE OSTI2022

Neutron scattering maps the higher-order assembly of NADPH-dependent assimilatory sulfite reductase

Precursor molecules for biomass incorporation must be imported into cells and made available to the molecular machines that build the cell. Sulfur-containing macromolecules require that sulfur be in its S2- oxidation state before assimilation into amino acids, cofactors, and vitamins that are essential to organisms throughout the biosphere. In α-proteobacteria, NADPH-dependent assimilatory sulfite reductase (SiR) performs the final six-electron reduction of sulfur. SiR is a dodecameric oxidoreductase composed of an octameric flavoprotein reductase (SiRFP) and four hemoprotein metalloenzyme oxidases (SiRHPs). SiR performs the electron transfer reduction reaction to produce sulfide from sulfite through coordinated domain movements and subunit interactions without release of partially reduced intermediates. Efforts to understand the electron transfer mechanism responsible for SiR’s efficiency are confounded by structural heterogeneity arising from intrinsically disordered regions throughout its complex, including the flexible linker joining SiRFP’s flavin-binding domains. As a result, high-resolution structures of SiR dodecamer and its subcomplexes are unknown, leaving a gap in the fundamental understanding of how SiR performs this uniquely large-volume electron transfer reaction. In this work, we use deuterium labeling, in vitro reconstitution, analytical ultracentrifugation (AUC), small-angle neutron scattering (SANS), and neutron contrast variation (NCV) to observe the relative subunit positions within SiR’s higher-order assembly. AUC and SANS reveal SiR to be a flexible dodecamer and confirm the mismatched SiRFP and SiRHP subunit stoichiometry. NCV shows that the complex is asymmetric, with SiRHP on the periphery of the complex and the centers of mass between SiRFP and SiRHP components over 100 Å apart. SiRFP undergoes compaction upon assembly into SiR’s dodecamer and SiRHP adopts multiple positions in the complex. The resulting map of SiR’s higher-order structure supports a cis/trans mechanism for electron transfer between domains of reductase subunits as well as between tightly bound or transiently interacting reductase and oxidase subunits.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Detailed characterization of a PWR fuel rod at high burnup in support of LOCA testing

Experimental investigations of the fuel microstructure and volatile fission products along the pellet of a high burnup specimen (local burnup 76 GWd/tHM) have been conducted to support future transient testing. Detailed microscopy examinations have been carried out at different length scales. Transmission electron microscopy has highlighted a significant amount of damage across the entire radius with the formation of networks of dislocations. The optical and scanning electron microscopy determined the formation of three zones in the pellet with different characteristics. An intermediate region with no grain subdivision, lower porosity than the central zone porosity and high retained fission gas in nanometric bubbles and in the matrix was present between r/r0 ˜ 0.55 and 0.8. The high retention of gas in this region might suggest that the region will be prone to fine fragmentation, in addition to the HBS. An abrupt transition in the structure was observed at mid radius, with a third region developing from the mid radius to the pellet center. In this part of the pellet, metallic and grey phases with size between hundreds of nanometers and a few micrometers have formed at grain boundaries. The majority of fission gas has been released from the grain matrix and the original grains have polygonised, forming sub-grain domains separated by low-angle grain boundaries. No final explanation can be given for the polygonization occurring in the center, but on the basis of the irradiation history and the analysis of all the post irradiation examination (PIE) data, it is postulated that the polygonization within the original grains is an effect of dynamic recovery occurring at high temperature in the fuel center.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

X-ray Transient Absorption Studies of Exciton Self-Trapping

Here, we present optical pump/X-ray absorption probe studies to probe changes in electronic distribution and local structure upon formation of a self-trapped exciton. The experiments were carried out on the mixed-valence halide-bridged transition metal linear chain charge density wave material [Pt(en 2 )][Pt(en 2 )Cl 2 ]·(ClO 4 ) 4 . Photoinduced changes in the Pt L III XANES spectrum were measured on a picosecond time scale following generation of excitons via optical excitation of the intervalence charge transfer transition. Ab initio FEFF9 modeling of the spectra and the associated angular momentum projected density of states was used to interpret the response. We find photoinduced changes reflecting electronic redistribution and local lattice distortions that correspond to strong localization of the self-trapped state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing coherent electronic superpositions of singly and doubly excited states of krypton with extreme-ultraviolet four-wave-mixing spectroscopy

Radiative nonlinear four-wave mixing can monitor the evolution of electronic wave packets, providing access to lifetimes and quantifying the light-induced couplings between excited states. In this article, we report the observation of quantum beats in an autoionizing electronic wave packet in krypton, probed using this technique. Analysis of the signal reveals that these beats originate from the contribution of previously unassigned, doubly excited states interacting with singly excited ones. We introduce a minimal theoretical model, based on multichannel quantum-defect theory, which quantitatively reproduces both the wave-packet dynamics and the static spectrum. This work combines a versatile, noncommensurate XUV-IR-based experimental scheme with a tractable model, establishing a powerful approach for the metrology and control of complex, correlated electronic states.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Attosecond-pump attosecond-probe x-ray spectroscopy of liquid water

Attosecond-pump/attosecond-probe experiments have long been sought as the most straightforward method for observing electron dynamics in real time. Although there has been much success with overlapped near-infrared femtosecond and extreme ultraviolet attosecond pulses combined with theory, true attosecond-pump/attosecond-probe experiments have been limited. Here we used a synchronized attosecond x-ray pulse pair from an x-ray free-electron laser to study the electronic response to valence ionization in liquid water through all x-ray attosecond transient absorption spectroscopy (AX-ATAS). Our analysis showed that the AX-ATAS response is confined to the subfemtosecond timescale, eliminating any hydrogen atom motion and demonstrating experimentally that the 1b 1 splitting in the x-ray emission spectrum is related to dynamics and is not evidence of two structural motifs in ambient liquid water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ultrafast optical modulation of vibrational strong coupling in ReCl(CO) 3 (2,2-bipyridine)

Polaritons – hybrid light-matter states formed from the strong coupling of a bright molecular transition with a confined photonic mode – may offer new opportunities for optical control of molecular behavior. Vibrational strong coupling (VSC) has been reported to impact ground-state chemical reactivity, but its influence on electronic excited-state dynamics remains unexplored. Here, we take a first step towards excited-state VSC by demonstrating optical modulation of the ReCl(CO) 3 (bpy), (bpy = 2,2-bipyridine) complex under VSC using femtosecond ultraviolet (UV)-pump/infrared (IR)-probe spectroscopy. We establish ground-state VSC of ReCl(CO) 3 (bpy) in a microfluidic Fabry-Pérot cavity equipped with indium tin oxide (ITO)-coated mirrors. ITO is effectively dichroic as it is reflective in the IR and transmissive in the UV-visible and therefore minimizes optical interference. Excitation with UV pump light drives ReCl(CO) 3 (bpy) into a manifold of electronic excited states that subsequently undergo non-radiative relaxation dynamics. We probe the transient response of the strongly-coupled system in the mid-IR, observing both Rabi contraction and cavity-filtered excited-state absorption signatures. We reconstruct the intrinsic response of intracavity molecules from the transient cavity transmission spectra to enable quantitative comparison with extracavity control experiments. We report no changes in the excited-state dynamics of ReCl(CO) 3 (bpy) under ground-state VSC. However, we do observe significant amplification of transient vibrational signals due to classical cavity-enhanced optical effects. This effort lays the groundwork to pursue direct excited-state VSC aimed at modulating photochemical reactivity.

cavity-enhanced spectroscopy↗
NASA NTRS1982

Minority carrier diffusion length measurements - A review and comparison of techniques

A review of the major techniques for measuring minority carrier diffusion lengths in solar cells is given. Limits of applicability are indicated for each method, as relevant to indirect bandgap materials such as silicon, and direct bandgap materials like gallium arsenide. A discussion and bibliography is presented for the following techniques: uniform generation, electron beam induced current, Schottky barrier (and other steady-state) photocurrent, surface photovoltage, transient decay, and luminescence.

Khan, A. A.↗
NASA NTRS1984

The effects of lithium counterdoping on radiation damage and annealing in n(+)p silicon solar cells

Boron-doped silicon n(+)p solar cells were counterdoped with lithium by ion implantation and the resultant n(+)p cells irradiated by 1 MeV electrons. Performance parameters were determined as a function of fluence and a deep level transient spectroscopy (DLTS) study was conducted. The lithium counterdoped cells exhibited significantly increased radiation resistance when compared to boron doped control cells. Isochronal annealing studies of cell performance indicate that significant annealing occurs at 100 C. Isochronal annealing of the deep level defects showed a correlation between a single defect at E sub v + 0.43 eV and the annealing behavior of short circuit current in the counterdoped cells. The annealing behavior was controlled by dissociation and recombination of this defect. The DLTS studies showed that counterdoping with lithium eliminated three deep level defects and resulted in three new defects. The increased radiation resistance of the counterdoped cells is due to the interaction of lithium with oxygen, single vacancies and divacancies. The lithium-oxygen interaction is the most effective in contributing to the increased radiation resistance.

Weinberg, I.↗
NASA NTRS1992

Defect behavior, carrier removal and predicted in-space injection annealing of InP solar cells

Defect behavior, observed by deep level transient spectroscopy (DLTS), is used to predict carrier removal and the effects of simultaneous electron irradiation and injection annealing of the performance of InP solar cells. For carrier removal, the number of holes trapped per defect is obtained from measurements of both carrier concentrations and defect concentrations during an isochronal anneal. In addition, from kinetic considerations, the behavior of the dominant defect during injection annealing is used to estimate the degradation expected from exposure to the ambient electron environment in geostationary orbit.

Weinberg, I.↗