SEARCH · Engineering Papers

Results for “stream stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Utilizing Controlled Vibrations in a Microgravity Environment to Understand and Promote Microstructural Homogeneity During Float-Zone Crystal Growth

Our previous experiments with NaNO3 float-zones revealed that steady thermocapillary flow can be balanced/offset by the controlled surface streaming flow induced by end-wall vibration. In the current experiments we are examining the effects of streaming flow on steadying/stabilizing nonsteady thermocapillary flow in such zones. To this effect we have set up a controlled NaNO3 half-zone experiment, where the processing parameters, like zone dimensions and temperature gradients, can be easily varied to generate nonsteady thermocapillary flows. In the present paper we present preliminary results of our investigations into stabilizing such flows by employing end-wall vibration.

Anilkumar, A. V.↗

NASA NTRS2001

Utilizing Controlled Vibrations in a Microgravity Environment to Understand and Promote Microstructural Homogeneity During Floating-Zone Crystal Growth

Anilkumar, A. V.↗

DOE OSTI2016

Numerical Analysis of the Source of Excessive Na + and Cl – Species in Flowback Water From Hydraulically Fractured Shale Formations

Fracture fluid comprises fresh water, proppant, and a small percentage of other additives, which support the hydraulic fracturing process. Excluding situations in which flowback water is recycled and reused, total dissolve solids in fracture fluid is limited to the fluid additives, such as potassium chloride (1-7 weight percent KCL), which is used as a clay stabilizer to minimize clay swelling, and clay particle migration. However, the composition of recovered fluid, especially as it relates to the total dissolve solids (TDS), is always substantially different than the injected fracture fluid. The ability to predict flowback water volume and composition is useful when planning for the management or reuse of this aqueous byproduct stream. In this work, an ion transport and halite dissolution model was coupled with a fully implicit, dual porosity, numerical simulator, to study the source of the excess solutes in flowback water, and to predict the concentration of both Na+ and Cl- species seen in recovered water. The results showed that mixing alone, between the injected fracture fluid and concentrated in situ formation brine, could not account for the substantial rise in TDS seen in flowback water. Instead, the results proved that halite dissolution is a major contributor to the change in TDS seen in fracture fluid during injection and recovery. Halite dissolution can account for as much as 81% of Cl- and 86.5% of Na+ species seen in 90-day flowback water; mixing, between the injected fracture fluid and in situ concentrated brine, accounts for approximately 19% Cl- and 13% Na+.

03 NATURAL GAS↗

DOE OSTI2015

Novel Methods of Tritium Sequestration: High Temperature Gettering and Separation Membrane Materials Discovery for Nuclear Energy Systems

This project is aimed at addressing critical issues related to tritium sequestration in next generation nuclear energy systems. A technical hurdle to the use of high temperature heat from the exhaust produced in the next generation nuclear processes in commercial applications such as nuclear hydrogen production is the trace level of tritium present in the exhaust gas streams. This presents a significant challenge since the removal of tritium from the high temperature gas stream must be accomplished at elevated temperatures in order to subsequently make use of this heat in downstream processing. One aspect of the current project is to extend the techniques and knowledge base for metal hydride materials being developed for the ''hydrogen economy'' based on low temperature absorption/desorption of hydrogen to develop materials with adequate thermal stability and an affinity for hydrogen at elevated temperatures. The second focus area of this project is to evaluate high temperature proton conducting materials as hydrogen isotope separation membranes. Both computational and experimental approaches will be applied to enhance the knowledge base of hydrogen interactions with metal and metal oxide materials. The common theme between both branches of research is the emphasis on both composition and microstructure influence on the performance of sequestration materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2015

Characterization of crystalline ceramic waste form

The research conducted in this work package is to collect data in support of future development of ceramic waste forms and to help develop the next generation high performance waste management technologies. This work package collaborates closely with the work conducted under “Ceramics - Savannah River National Laboratory (SRNL) - (FT-15SR030702)” and the NEUP project “Alternative High-Performance Ceramic Waste Forms” – Alfred University (AU) – (DE-AC07-05ID14517)”. The Los Alamos National Laboratory (LANL) is focusing on characterization and testing procedure on the reference crystalline ceramics to further develop the crystalline ceramic waste form to incorporate combined HLW raffinate stream and/or TRU stream from fuels fabrication processes. In Fiscal Year 2015, we are mainly working on cold crucible induction melter (CCIM) test multi-phase crystalline ceramic waste form samples and single phase hollandite materials. Various characterization techniques (including X-ray diffraction, transmission electron microscopy, scanning electron microscopy) were used to characterize CCIM samples. For the radiation stability test, in situ radiation techniques were employed to simulate self-radiation in waste form samples.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS1947

Low-Speed Wind-Tunnel Tests of a Pilotless Aircraft Having Horizontal and Vertical Wings and Cruciform Tail

Low-speed tests of a pilotless aircraft were conducted in the Langley propeller-research tunnel to provide information for the estimation of the longitudinal stability and. control, to measure the aileron effectiveness, and to calibrate the radome and the Machmeter pitot-static orifices. It was found that the model possessed a stEb.le variation of elevator angle required for trim throughout the speed range at the design angle of attack. A comparison of the airplane with and without JATO units and with an alternate rocket booster showed that a large loss in longitudinal stability and control resulting from the addition of the rocket booster to the aircraft was sufficient to make the rocket-booster assembly unsatisfactory as an alternate for the JATO units. Reversal of the aileron effectiveness was evident at positive deflections of the vertical wing flap indicating that the roll-stabilization system would produce roiling moments in a tight right turn contrary to its design purpose. Vertical-wing-flap deflections caused large errors in the static-pressure reading obtained by the original static-tube installation. A practical installation point on the fuselage was located which should yield reliable measurement of the free-stream static pressure.

Mastrocola, N↗

NASA NTRS1978

Nonlinear stability of solar type 3 radio bursts. 1: Theory

A theory of the excitation of solar type 3 bursts is presented. Electrons initially unstable to the linear bump-in-tail instability are shown to rapidly amplify Langmuir waves to energy densities characteristic of strong turbulence. The three-dimensional equations which describe the strong coupling (wave-wave) interactions are derived. For parameters characteristic of the interplanetary medium the equations reduce to one dimension. In this case, the oscillating two stream instability (OTSI) is the dominant nonlinear instability, and is stablized through the production of nonlinear ion density fluctuations that efficiently scatter Langmuir waves out of resonance with the electron beam. An analytical model of the electron distribution function is also developed which is used to estimate the total energy losses suffered by the electron beam as it propagates from the solar corona to 1 A.U. and beyond.

Smith, R. A.↗

NASA NTRS1990

On the instabilities of supersonic mixing layers - A high-Mach-number asymptotic theory

The stability of a family of tanh mixing layers is studied at large Mach numbers using perturbation methods. It is found that the eigenfunction develops a multilayered structure, and the eigenvalue is obtained by solving a simplified version of the Rayleigh equation (with homogeneous boundary conditions) in one of these layers which lies in either of the external streams. This analysis leads to a simple hypersonic similarity law which explains how spatial and temporal phase speeds and growth rates scale with Mach number and temperature ratio. Comparisons are made with numerical results, and it is found that this similarity law provides a good qualitative guide for the behavior of the instability at high Mach numbers. In addition to this asymptotic theory, some fully numerical results are also presented (with no limitation on the Mach number) in order to explain the origin of the hypersonic modes (through mode splitting) and to discuss the role of oblique modes over a very wide range of Mach number and temperature ratio.

Balsa, Thomas F.↗

DOE OSTI2015

Beam Stability R&D for the APS MBA Upgrade

Beam diagnostics required for the APS Multi-bend acromat (MBA) are driven by ambitious beam stability requirements. The major AC stability challenge is to correct rms beam motion to 10% the rms beam size at the insertion device source points from0.01 to 1000 Hz. The vertical plane represents the biggest challenge forAC stability, which is required to be 400 nm rms for a 4-micron vertical beam size. In addition to AC stability, long-term drift over a period of seven days is required to be 1 micron or less. Major diagnostics R&D components include improved rf beam position processing using commercially available FPGA-based BPM processors, new X-ray beam position monitors based on hard X-ray fluorescence from copper and Compton scattering off diamond, mechanical motion sensing to detect and correct long-term vacuum chamber drift, a new feedback system featuring a tenfold increase in sampling rate, and a several-fold increase in the number of fast correctors and BPMs in the feedback algorithm. Feedback system development represents a major effort, and we are pursuing development of a novel algorithm that integrates orbit correction for both slow and fast correctors down to DC simultaneously. Finally, a new data acquisition system (DAQ) is being developed to simultaneously acquire streaming data from all diagnostics as well as the feedback processors for commissioning and fault diagnosis. Results of studies and the design effort are reported.

APS MBA Upgrade↗

DOE OSTI2021

Study of the Hydrogen Pretreatment of Gallium and Platinum Promoted ZSM-5 for the Ethane Dehydroaromatization Reaction

Here, the performances of gallium and platinum promoted ZSM-5 catalysts, fresh and reduced, were studied for the dehydroaromatization of ethane to aromatics. Fresh and reduced 2% Ga/ZSM-5, 1.5% Ga–0.5% Pt/ZSM-5, and 0.5% Pt/ZSM-5 were tested in a fixed-bed reactor system at 615 °C for 2 h time on stream. It was observed that the hydrogen reduction of the fresh Pt-containing catalysts led to an increase in catalytic conversion. The addition of platinum to the gallium catalyst resulted in an increase in the reducibility of the Ga species on the surface of the zeolite. The GaPt catalysts exhibited an increase in ethane conversion and the stability of aromatic production selectivity over the Ga and Pt catalysts. The as-prepared fresh catalysts were characterized by ICP and BET methods. The fresh and reduced catalysts were further analyzed by XRD, H 2 -TPR, XPS, pyridine DRIFTS, TGA, and TEM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

FFTSF: Revisiting Sub-Seasonal Streamflow Forecasting with Simple Feedforward Network

Accurate short-to-subseasonal streamflow forecasts are vital for water management, including flood preparedness, drought mitigation, hydropower scheduling, and ecosystem protection. However, extending a forecast beyond a few days remains challenging due to complexity of hydrological processes. While recent self-attention based transformer architectures such as iTransformer have gained traction in time-series forecasting, these models suffer from several critical limitations: (1) significant computational overhead that scales quadratically with sequence length, (2) vulnerability to overfitting on limited hydrological datasets, (3) degraded performance on long-horizon forecasts due to attention decay, and (4) excessive architectural complexity that hampers interpretability and operational deployment. In this study, we propose a simple Feedforward Time Series Forecasting (FFTSF) network that directly addresses these limitations through its lightweight architecture and long-range forecasting capabilities. We evaluate FFTSF across 178 USGS stream gauges spanning diverse climate regimes by forecasting lead times of 1-, 7-, 14-, and 30-days. Our results demonstrate that FFTSF achieves competitive performance at short lead times (NSE of 0.778 for 1-day forecasts) while substantially outperforming complex baselines at longer forecast period, achieving the highest NSE (0.271) at 30-day forecasts with greater robustness and stability. For 30-day forecasts, FFTSF achieves a 71% improvement over NLinear, 57% improvement over DLinear and 12% improvement over the computationally intensive iTransformer while requiring fewer computational resources. Our findings reveal that architectural complexity is not necessary for hydrological forecasting, demonstrating that well-designed simple models can outperform attention mechanisms for subseasonal streamflow forecasting. The computational efficiency and consistent long-range performance of FFTSF make it suitable for water management applications where reliable extended forecasts are essential.

Krishnan Kutty Ambika, Anukesh [ORNL] (ORCID:00000↗

NASA NTRS1988

Vibration and flutter analysis of the SR-7L large-scale propfan

A structural and aeroelastic analysis of the SR-7L advanced turboprop is presented. Analyses were conducted for several cases at different blade pitch angles, blade support conditions, rotational speeds, free-stream Mach numbers, and number of blades. A finite element model of the final blade design was used to determine the blade's vibration behavior and its sensitivity to support stiffness. A computer code which was based on three-dimensional, subsonic, unsteady lifting surface aerodynamic theory, was used for the aeroelastic analysis to examine the blade's stability at a cruise condition of Mach 0.8 at 1700 rpm. The results showed that the calculated frequencies and mode shapes obtained agreed well with the published experimental data and that the blade is stable for that operating point.

August, Richard↗

NASA NTRS1990

Dynamical instabilities in axisymmetric stellar systems. I - Oblate E6 models

The stability of a set of models based on isothermal oblate E6 elliptical galaxies is studied using N-body techniques. The only stable models are those that are near the isotropic model and have nearly equal number of stars in retrograde and prograde orbits. Fast rotators are unstable to modes that appear to be analogous to the classical streaming instability seen in many disk systems. Systems with a large velocity dispersion in the direction of the cylindrical radius are unstable to modes that appear to be similar to the radial orbit instability observed in some spherical systems. However, evidence is presented that these two instabilities may be related, and an instability criterion that applies to both is constructed.

Levison, Harold F.↗

DOE OSTI2025

Upcycling Polyethylene Waste Into Advanced Carbon Materials Used for Energy Storage Applications

Upcycling plastic into advanced carbons, such as graphite and graphene, offers attractive options to manage waste streams by converting the plastic into carbon electrode materials for energy storage devices. However, polyethylene (PE) is notoriously difficult to upcycle because it decomposes into light gases at approximately 350-400 °C which prevents processing it at higher temperatures to convert it into advanced carbons. This work addresses this challenge by oxidatively functionalizing PE between 300-330 C which stabilizes it for higher temperature processing into graphite & graphene. In addition, the graphite & graphene are tested as lithium-ion battery or supercapacitor electrodes where their electrochemical performances outperform commercial materials.

graphene↗

DOE OSTI2025

Upcycling Polyethylene Waste Into Advanced Carbon Materials Used for Energy Storage Applications

graphene↗

NASA NTRS1990

Transverse liquid fuel jet breakup, burning, and ignition

An analytical study of the breakup, burning, and ignition of liquid fuels injected transversely into a hot air stream is conducted. The non-reacting liquid jet breakup location is determined by the local sonic point criterion. Two models, one employing analysis of an elliptical jet cross-section and the other employing a two-dimensional blunt body to represent the transverse jet, were used for sonic point calculations. An auxiliary criterion based on surface tension stability is used as a separate means of determining the breakup location. For the reacting liquid jet problem, a diffusion flame supported by a one-step chemical reaction within the gaseous boundary layer is solved along the ellipse surface in subsonic cross flow. Typical flame structures and concentration profiles were calculated for various locations along the jet cross-section as a function of upstream Mach numbers. The integration reaction rate along the jet cross-section is used to predict ignition position, which is found to be situated near the stagnation point. While a multi-step reaction is needed to represent the ignition process more accurately, the present calculation does yield reasonable predictions concerning ignition along a curved surface.

Li, Hsi-Shang↗

DOE OSTI2024

Electrochemical Manipulation and Radiolytic Evaluation of Organic Phase Neptunium

Post for LDRD Annual Poster Session Under envisioned used nuclear fuel reprocessing conditions, neptunium (Np) is present in a mixture of extractable Np(IV)/Np(VI) and inextractable Np(V) species, the distribution of which is dependent on several factors that lead to the unintentional partitioning of Np into various phases and product streams, reducing process and cost efficiency. With this in mind, we tested an innovative approach to precisely control the oxidation state distribution of Np using novel, high surface area, optically transparent, ligand modified tin-doped indium oxide electrodes (LMEs). These proof-of-concept experiments employed a variety of radiation and electrochemistry (echem) techniques to determine: electrode radiation stability; aqueous echem behavior of Np at nITO|P3 electrode surfaces; radiation-induced Np-extractant reaction kinetics; and non-aqueous echem of Np in diethylhexyl butyramide (DEHBA) solutions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2019

Effective Removal of Anionic Re(VII) by Surface-Modified Ti 2 CT x MXene Nanocomposites: Implications for Tc(VII) Sequestration

Environmental contamination by 99 Tc(VII) from radioactive wastewater streams is of particular concern due to the long half-life of 99 Tc and high mobility of pertechnetate. Here in this paper, we report a novel MXene-polyelectrolyte nanocomposite with three-dimensional networks for enhanced removal of perrhenate, which is pertechnetate simulant. The introduction of poly(diallyldimethylammonium chloride) (PDDA) regulates the surface charge and improves the stability of Ti 2 CT x nanosheet, resulting in Re(VII) removal capacity of up to 363 mg g –1 , and fast sorption kinetics. The Ti 2 CT x /PDDA nanocomposite furthermore exhibits good selectivity for ReO 4 – when competing anions (such as Cl – and SO 4 2– ) coexist at a concentration of 1800 times. The immobilization mechanism was confirmed as a sorption-reduction process by batch sorption experiments and X-ray photoelectron spectroscopy. The pH-dependent reducing activity of Ti 2 CT x /PDDA nanocomposite toward Re(VII) was clarified by X-ray absorption spectroscopy. As the pH increases, the local environment gradually changes from octahedral-coordinated Re(IV) to tetrahedral-coordinated Re(VII). The overall results suggest that Ti 2 CT x /PDDA nanocomposite may be a promising candidate for efficient elimination of Tc contamination. The reported surface modification strategy might result in applications of MXene-based materials in environmental remediation of other oxidized anion pollutants.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗